Letšoao la GLOBOSTAR4 Channel Constant Voltage DMX512 & RDM Decoder
Nomoro ea mohlala: D4-L
GLOBOSTAR D4-L 4 Channel Constant Voltage DMX512 le RDM Decoder

RDM/Mosebetsi o emeng o le mong/Maqhubu a supileng a PWM/Mohala kapa dimming tsa logarithmic/pontsho ya dinomoro

Litaba pata
1 Likaroloana
2 Tekheniki Parameters
3 Mechanical Structures le Installations
4 Setšoantšo sa Wiring
5 Tshebetso
6 Litokomane / Lisebelisoa
6.1 Litšupiso

Likaroloana

  • Latela melaoana e tloaelehileng ea DMX512.
  • Pontšo ea linomoro tsa dijithale, seta aterese ea ho qala ea DMX ka likonopo.
  • Ts'ebetso ea RDM e ka khona ho fumana puisano lipakeng tsa master ea DMX le decoder.
    Bakeng sa mohlalaample, aterese ea DMX decoder e ka hlophisoa ke master console ea DMX.
  • 1/2/4 tlhahiso ea mocha oa DMX e ka khethoang.
  • 16bit (maemo a 65536) /8bit (maemo a 256) boemo bo bohlooho bo ka khethoang.
  • PWM frequency 250/500/1000/2000/4000/8000/16000Hz selectable.
  • Logarithmic kapa linear dimming curve e ka khethoa.
  • Mokhoa o ikemetseng oa RGB/RGBW le mokhoa oa dimmer oa 4 o ka khethoang,
    tse laoloang ke likonopo tse nang le mananeo a hahelletsoeng ka hare, sebakeng sa lets'oao la DMX.
  • Ho chesa haholo / Tšireletso ea potoloho e khuts'oane, fola ka bo eona.

Tekheniki Parameters

Kenyeletso le Sephetho

Keletso voltage 12-24VDC
Kenya hona joale 20.5A
Sephetho voltage 4 x (12-24)VDC
Sephetho sa hajoale 4CH,5A/CH
Matla a hlahisang 4 x (60-120)W
Mofuta oa tlhahiso Kamehla voltage
Tšireletseho le EMC
EMC e tloaelehileng (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Tekanyetso ea polokeho(LVD) EN 62368-1:2020+A11:2020
Certi CE, EMC, LVD
  Tiisetso  5 lilemo
Tikoloho
Mocheso oa ts'ebetso Ta: -30
O
C ~ +55
O
C
Thempereichara ea boholo (Boholo.) Tc: +70
O
C
Lintlha tsa IP IP20
Sephutheloana
Boholo L175x W54 x H27mm
Boima bo felletseng 0.130kg

Mechanical Structures le Installations

GLOBOSTAR D4-L 4 Channel Constant Voltage DMX512 le RDM Decoder - Mehaho

Setšoantšo sa Wiring

GLOBOSTAR D4-L 4 Channel Constant Voltage DMX512 le RDM Decoder - Mehaho2

Hlokomela:

  1. Letšoao la DMX ampLifier ea hlokahala haeba ho hoketsoe li-decoder tse fetang 32, kapa ho sebelisoa mats'oao a malelele amplification ha ea lokela ho feta makhetlo a 5 ka ho tsoelang pele.
  2. Haeba phello ea ho khutlisa e etsahala ka lebaka la mohala o molelele oa lets'oao kapa boleng bo bobe ba mohala, ka kopo leka ho hokela 0.25W 90-120Ω terminal resistor qetellong ea mohala o mong le o mong oa lets'oao oa DMX.
  3. Ha o bonts'a OLA, alamo e tletse haholo. Ha o hlahisa OHA, alamo ea mocheso o feteletseng.

Tshebetso

Litlhophiso tsa parameter ea sistimi

  • Tobetsa nako e telele M le ◀ konopo ka nako e le 'ngoe bakeng sa 2s, lokisetsa parameter ea tsamaiso ea ho seta: mokhoa oa ho khetholla, boemo ba bohlooho, maqhubu a PWM a tsoang, lekhalo le khanyang,
    boemo ba tlhahiso ea kamehla, skrine se se nang letho sa othomathike. tobetsa konopo ea M ho fetola ntho e tšeletseng.
  • Mokhoa oa ho khetha: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola 1/2/4 mokhoa oa ho khetholla kanale(”d-1“,”d-2“ kapa ”d-4“). Ha e setiloe joalo ka dekhouda e le 1 ea kanale, dekhouda e sebetsa feela
    1 aterese ea DMX, 'me likanale tse nne li hlahisa khanya e tšoanang ea aterese ena ea DMX.
  • Boemo bo bohlooho: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola 8bit("b08") kapa 16 bit("b16"). khetha 16 bit haeba DMX master e tšehetsa 16 bit.
  • Khafetsa ea PWM: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho switjha 250Hz("F02"), 500Hz("F05"), 1000Hz("F10"), 2000Hz("F20"), 4000Hz("F40"), 8000Hz F80")
    kapa 16000Hz("F16"). Maqhubu a phahameng a PWM, a tla baka tlhahiso e tlase ea hona joale, lerata le phahameng la matla, empa e loketse kh'amera (No
  • Mokokotlo o khanyang: tobetsa ka bokhutšoanyane ◀ kapa ▶ konopo ho fetola linear curve(”CL“) kapa logarithmic curve(”CE“).
  • Boemo ba tlhahiso ea kamehla: tobetsa ◀ kapa ▶ konopo ho fetola boemo ba kamehla ba 0-100% ("d00" ho "dFF" ) ha ho se na letšoao la ho kenya la DMX.
  • Sekrine se se nang letho se iketselitseng: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho bulela ("bon") kapa tima ("boF") skrineng se se nang letho.
  • Tobetsa nako e telele konopo ea M bakeng sa 2s kapa timeout 10s, tlohela tlhophiso ea paramethara ea sistimi.

Mokhoa oa DMX

  • Tobetsa hakhutšoanyane M key, ha o bonts'a 001~512, kenya mokhoa oa DMX.
  • Tobetsa ◀ kapa ▶ konopo ho fetola aterese ea ho qala ea DMX decode(001~512), tobetsa nako e telele ho lokisa kapele.
  • Haeba ho na le kenyo ya letshwao la DMX, e tla kena mokgweng wa DMX ka boyona.
  • DMX Dimming: Decoder e 'ngoe le e 'ngoe ea D4-L DMX e nka aterese e le 4 ea DMX ha e hokela khomphutha ea DMX.
    Bakeng sa mohlalaample, aterese ea ho qala e sa fetoheng ke 1, kamano ea bona e tsamaellanang ka foromo:GLOBOSTAR D4-L 4 Channel Constant Voltage DMX512 le RDM Decoder - DMX mode

Mokhoa o ikemetseng oa RGB/RGBW

  • Kenya mokhoa o ikemetseng oa RGB/RGBW ha feela lets'oao la DMX le khaotsoe kapa le lahlehile.
  • Tobetsa hakhutšoanyane M konopo, ha o bonts'a P01~P30, kenya mokhoa o ikemetseng oa RGB/RGBW.
  • Tobetsa ◀ kapa ▶ konopo ho fetola dynamic mode number(P01~P30).
  • Mokhoa o mong le o mong o ka fetola lebelo le khanya.
    Tobetsa nako e telele senotlolo sa M bakeng sa 2s, lokisetsa lebelo la mokhoa oa ho seta, khanya, khanya ea kanale ea W.
    Tobetsa M konopo ho fetola ntho tse tharo.
    Tobetsa ◀ kapa ▶ konopo ho beha boleng ba ntho ka 'ngoe.
    Lebelo la mokhoa: lebelo la boemo ba 1-10 (S-1, S-9, SF).
    Khanya ea mokhoa: khanya ea boemo ba 1-10(b-1, b-9, bF).
    Khanya ea kanale ea W: khanya ea boemo ba 0-255 (400-4FF).
    Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, khaotsa ho seta.
    DMX Console Sephetho sa Decoder ea DMX
    CH1 0-255 CH1 PWM 0-100% (LED R)
    CH2 0-255 CH2 PWM 0-100% (LED G)
    CH3 0-255 CH3 PWM 0-100% (LED B)
    CH4 0-255 CH4 PWM 0-100% (LED W)

    GLOBOSTAR D4-L 4 Channel Constant Voltage DMX512 le RDM Decoder - E ikemetseng

Boemo ba dimmer bo ikemetseng

  • Kenya mokhoa o ikemetseng oa dimmer ha feela lets'oao la DMX le khaotsoe kapa le lahlehile.
  • Tobetsa ka nako e khutšoanyane konopo ea M, ha u hlahisa L-1~L-8, kenya mokhoa oa dimmer o ikemetseng.
  • Tobetsa ◀ kapa ▶ konopo ho fetola nomoro ea "dimmer mode"(L-1~L-8).
  • Mokhoa o mong le o mong oa dimmer o ka fetola khanya e 'ngoe le e 'ngoe ka boikemelo.
    Tobetsa nako e telele konopo ea M bakeng sa 2s, lokisetsa ho seta khanya ea kanale e mene.
    Tobetsa hakhutšoanyane M konopo ho fetola kanale e mene(100~1FF, 200~2FF, 300~3FF, 400~4FF).
    Tobetsa ◀ kapa ▶ konopo ho seta boleng ba khanya ea kanale ka 'ngoe.
    Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, khaotsa ho seta.GLOBOSTAR D4-L 4 Channel Constant Voltage DMX512 le RDM Decoder - LebeloGLOBOSTAR D4-L 4 Channel Constant Voltage DMX512 le RDM Decoder - dimmer

Khutlisa paramethara ea kamehla ea feme

  • Tobetsa nako e telele ◀ le ▶ konopo bakeng sa 2s, khutlisetsa parameter ea kamehla ea feme, bonts'a"RES".
  • Factory default parameter: DMX decode mode, DMX decode start address ke 1, four channel decode, 8 bit grey level, 2000Hz PWM frequency output, logarithmic brightness curve, output 100% level ha ho na DMX input, RGB mode number ke 1, dimmer mode. nomoro ke 1, tima skrine e se nang letho ea othomathike.

Lenane la ho fetola mokhoa oa RGB

Che. Lebitso Che. Lebitso Che. Lebitso
P01 Bofubelu bo tsitsitseng P 1 1 Green strobe P21 Bosehla bo bofubelu bo boreleli
P02 Botala bo tsitsitseng P 1 2 Blue strobe P22 'Cyan e tala e boreleli
P03 Putsoa e tsitsitseng P 13 White strobe P23 Bopherese bo boputsoa bo boreleli
PO4 Bosehla bo tsitsitseng P 1 4 RGB strobe P24 Botala bo bosoeu bo boreleli
P05 Cyan e sa fetoheng P15 7 mebala strobe P25 RGB+W e bonolo
P06 Bopherese bo tsitsitseng P16 Bofubelu bo nyamela ka hare le ka ntle P26 RGBW e bonolo
P07 Bosoeu bo tsitsitseng P17 Botala bo nyamela ka hare le ka ntle P27 RGBY e bonolo
P08 RGB e tlole P 1 8 Boputsoa bo fifala kahare le kantle P28 Bopherese bo bosehla ba cyan bo boreleli
P09 7 tlola ka mebala P19 Bosoeu bo fela ka hare le ka ntle P29 RGB e bonolo
P10 Strobe e khubelu P20 RGBW e nyamela kahare le kantle P30 6 mmala o boreleli

Setlhophiso sa curve e nyenyefatsang

GLOBOSTAR D4-L 4 Channel Constant Voltage DMX512 le RDM Decoder - Dimming curve setting

Tlhahlobo e sa sebetseng le ho rarolla mathata

GLOBOSTAR D4-L 4 Channel Constant Voltage DMX512 le RDM Decoder - Logarithmic dimming curve

Ho se sebetse hantle Lisosa Ho batle phoso
Ha ho khanya 1 . Ha ho matla.
2. Khokahano e fosahetseng kapa e sa sireletsehang.		 1.Sheba matla.
2.Sheba khokahano.
Mmala o fosahetseng 1.Khokelo e fosahetseng ea lithapo tsa R/G/B/W.
Phoso ea aterese ea 2.DMX.		 1.Hokela hape lithapo tsa R/G/B/W.
2.Beha aterese e nepahetseng ea decode.
Ho se leka-lekane pakeng tsa ka pele le ka morao, ka voltaglerotholi 1.Output cable e telele haholo.
2.Wire bophara e nyane haholo.
3.Overload ho feta matla a phepelo ea matla.
4.Overload ho feta matla a taolo.		 1. Fokotsa phepelo ea cable kapa loop
2.Fetola terata e pharaletseng.
3.Ho fetola phepelo ea matla e phahameng
4.Eketsa phetisetso ea matla.

GLOBOSTAR D4-L 4 Channel Constant Voltage DMX512 le RDM Decoder - letšoao

Litokomane / Lisebelisoa

GLOBOSTAR D4-L 4 Channel Constant Voltage DMX512 le RDM Decoder [pdf] Bukana ea Mosebelisi
D4-L 4 Channel Constant Voltage DMX512 le RDM Decoder, D4-L 4, Channel Constant Voltage DMX512 le RDM Decoder, Moqtage DMX512 le RDM Decoder, DMX512 le RDM Decoder, RDM Decoder

Litšupiso

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *