mehloli ea lefats'e ea C93 BSD Blind Spot Detection System bakeng sa Likoloi

Tlhahisoleseding ya Sehlahiswa

• Nomoro ea Ntho: 2621376
• Sehlahisoa: Sensor ea Radar

Likarolo tse Kenyelelitsoe

• Setikara - likotoana tse 3
• Screw - likotoana tse 4
• Screw Hole Cove - likotoana tse 4
• Cable Tlama - likotoana tse 10
• DC 9V ~ 30V 480mA phepelo ea motlakase

Litaelo tsa Tšebeliso ea Sehlahisoa

1. Qala ka ho khetha sebaka se loketseng bakeng sa ho kenya sensor ea radar.
2. Hloekisa sebaka se khethiloeng 'me u netefatse hore ha se na litšila kapa litšila.
3. Tlosa sekhomaretsi sa sekhomaretsi ho se seng sa likotoana tsa setikara 'me u se khomarele ka thata sebakeng seo u se batlang.
4. Pheta mohato oa 3 bakeng sa likotoana tse peli tse setseng, ho etsa bonnete ba hore li arohane ka ho lekana.
5. Nka sekoti se le seng 'me u se kenye ka har'a lesoba le leng le le leng la screw ho sensor ea radar.
6. Lokisetsa sensor ea radar le setikara sebakeng se khethiloeng 'me u se sireletse ka ho tiisa li-screws.
7. Sebelisa likoahelo tsa lesoba la screw ho pata li-screw hore li shebahale hantle.
8. Hokela thae ea thapo ho thapo ea matla ea sensor ea radar ho e hlophisa le ho e sireletsa.
9. Hokela motlakase oa DC 9V ~ 30V 480mA ho sensor ea radar.
10. Hang ha instola e felile, bulela sesebelisoa sa motlakase sa koloi.
11. Sensor ea radar e tla qala mosebetsi oa ho itlhahloba, o bontšitsoeng ke khanya ea LED ka metsotsoana e 'meli le beep e le' ngoe e tsoang ho buzzer.
12. Kamora ho itlhahloba, sensor ea radar e tla kena maemong a emeng mme e be e loketse ts'ebetso.

KAKARETSO MOREKI
Rea leboha ha u khethile ho reka letoto la likoloi tsa rona tsa BSD microwave blind spotion system. Sepheo sa rona ke ho u fa sehlahisoa sa boleng bo holimo ka tšebeletso e molemo ka ho fetisisa. Ho netefatsa ts'ebetso e ntle ka ho fetesisa le ho qoba alamo efe kapa efe e fosahetseng kapa ho se sebetse hantle, re khothaletsa ka matla ho bala bukana ena ea mosebelisi ka hloko pele o kenya le ho o sebelisa.

Lenane la lintho

Mosebetsi

Ka ho kenya li-2pcs tse khethehileng tsa 77GHZ microwave sensors ka lehlakoreng la koloi, ha koloi e tsamaea, haeba ntho leha e le efe e tsamaeang e koetsoe sebakeng se foufetseng (limithara tse 3 ho tloha ka lehlakoreng le letona le le letšehali, limithara tse 20 ho tloha ka morao) ntho e tla fumanoa ke lisebelisoa tsa tsamaiso. , letšoao la LED le tla theoha 'me le lule le khanya bakeng sa ho hopotsa mokhanni, boemong bona, haeba mokhanni a fetola tsela, buzzer e tla etsa molumo oa bi-bi ho hopotsa mokhanni.

Selelekela sa Mosebetsi:

1. Ha u khanna ka tsela e tloaelehileng, haeba ho na le koloi e 'ngoe e koalang ka lehlakoreng le letšehali (ka ho le letona) la koloi, lebone la lefl(ka ho le letona) le tla benya. Ha ho alamo ea buzzer.
2. Ha tum ka letsohong le letšehali, haeba ho na le koloi e 'ngoe e koalang ka lehlakoreng le letšehali la koloi, lebone le letšehali la LED le tla benya 'me buzzer e tla lla.
3. Ha o khantšoa lebone le nepahetseng, haeba ho na le koloi e 'ngoe e koalang ka lehlakoreng le letona la koloi, lebone le nepahetseng la LED le tla benya, 'me buzzer e tšose.
4. Ka ts'ebetso ea RCTA. Ha u khutlela morao, lebelo le lekanyelitsoeng pakeng tsa koloi le ntho e ka morao ho koloi le feta 8km / H, LED e tla khanya 'me buzzer e tla lla.

Tlhaloso ea Sehlahisoa

Selelekela sa Mosebetsi

Kamora ho kenya le ho lokisoa, sehlahisoa se na le mesebetsi e latelang:

Sistimi e qala mosebetsi oa ho itlhahloba.
Ka mor'a hore koloi e khannoe, tsamaiso e qala mosebetsi oa ho itlhahloba, LED e khantša metsotsoana e 'meli, buzzer e lla ka nako e le' ngoe, ebe tsamaiso e kena ts'ebetsong ea standby.

Blind Spot Detection (BSD).
Kamora hore koloi e qale ho qala le ka gear e seng ea R, sistimi e qala ts'ebetso ea BSD: Koloi e ea pele ka mokhoa o tloaelehileng, ntle le ho khantša mabone, ha koloi e shebileng ka morao e le holimo ho feta lebelo la teraka ho kena tseleng. sebaka sa ho shebella letheba le foufetseng, ho hlahisoa alamo ea boemo ba pele, lehlakoreng le lumellanang la LED kamehla Iii, ho fihlela sepheo se tloha sebakeng sa ho shebella, hlakola temoso; Koloi e ntse e tsoela pele ka mokhoa o tloaelehileng, e bapala sebaka se nepahetseng sa leseli, ha pro-lane e ka morao e na le koloi e lebisitsoeng ka lebelo le phahameng ho feta koloi e kenang sebakeng se sa boneng, alamo ea bobeli, lehlakoreng le ts'oanang la LED ke kamehla e khantšitsoe, ho fihlela sepheo se tloha sebakeng sa tlhokomelo, hlakola temoso;

Thuso ea ho Fetola Lane (LCA).
Ka mor'a hore koloi e khanngoe le ka li-gear tse seng tsa R, tsamaiso e qala koloi haufi le LCA lane assist system temoso mosebetsi: Koloi e ea pele ka mokhoa o tloaelehileng, ntle le ho bonesa mabone, ha pro-lane e ka morao e na le koloi e lebisitsoeng ho eona. lebelo le phahameng ho feta koloi ho ea sebakeng se fapaneng sa ho shebella lisebelisoa tse thusang, lehlakoreng le ts'oanang la LED le lula le khantšitsoe, ho fihlela sepheo se tloha sebakeng sa tlhokomelo, hlakola temoso; Teraka e khanna pele ka mokhoa o tloaelehileng, e bapala 'mala o nepahetseng oa tum light state, e loketse ho fetola lane ho ea ka ho le letona, ha pro-lane e ka morao e na le koloi e shebiloeng ka lebelo le phahameng ho feta teraka e kenang sebakeng sa ho lekola lisebelisoa tse thusang, tse tsamaisanang. lehlakoreng la khanya ea LED, ha buzzer e lla alamo, ho fihlela sepheo se tloha sebakeng sa tlhokomelo, hlakola temoso; Ha u emetse lebone le khubelu kapa setopo se sekhutšoane ka thoko ho tsela, lebelo la koloi ke 0 km/H, haeba ho na le koloi e haufi le lebelo le fetang 6KM/H haufi kapa ho feta, sistimi e tla hlahisa Alamo ea boemo ba pele, lehlakoreng le lumellanang la LED le lula le khantšitsoe, buzzer ha e utloahale, ho fihlela sepheo se tloha sebakeng sa ho shebella, hlakola temoso;

Reversing Crossing Traffic Alert (RCTA).
Mosebetsi ona o sebelisoa feela ha radar e kenngoa ka morao ea koloi. Haeba e behiloe sebakeng sa hlooho kapa thekeng ea likoloi, mosebetsi ha o fumanehe ho sebelisoa. (Ke hore, u se ke ua hokahanya mohala o ka morao ha wiring). Koloi e emisitsoe 'me e le ka har'a lisebelisoa tsa R,' me tsamaiso e kenya ts'ebetso ea RCTA: Ha koloi e lebisitsoeng e ntse e khanna ka holimo ho alamo, tsamaiso e qala ho lla, khanya ea LED, mehele ea buzzer le temoso e hlahisoa ho fihlela target e siea sebaka sa alamo ebe e hlakola temoso; Koloi e shebiloeng e kena ho tsoa ka ho le letona, mabone a LED a nepahetseng 'me molumo oa molumo o lla.

Tlhokomeliso ea ho Feta (AOA).
Sistimi e kenya tšebetsong ts'ebetso ea temoso e fetang ha teraka e le ka har'a li-non-R ka mor'a ho qala 'me koloi e ntse e khanna: Ha lebelo la koloi le le holimo ho feta moo koloi e lebisitsoeng ho eona e fetang, ha koloi e lebisitsoeng e kena sebakeng sa alamo, lekhetlo la pele. -temoso ea boemo bo hlahisoa, 'me LED ka lehlakoreng le ts'oanang e lula e khantšitsoe ho fihlela koloi e lebisitsoeng e tloha sebakeng sa alamo ebe e hlakola temoso; Ha lebelo la koloi le potlakile ho feta koloi e shebiloeng e feta, ha sepheo se kena sebakeng sa ho shebella 'me se khantša lebone la ho tsamaisa ka lehlakoreng le ts'oanang, ho hlahisoa temoso ea bobeli, lehlakoreng le ts'oanang la khanya ea LED, lialamo tsa buzzer, ho fihlela koloi e shebiloeng e tloha sebakeng sa alamo, hlakola temoso.

Alamo ea lebelo le ts'oanang (ho ts'oara sebakeng se foufetseng).
Koloi e ka pel'a koloi e lebisitsoeng, empa koloi e lebisitsoeng e 'nile ea e-ba sebakeng se foufetseng sa koloi, ka lebelo le ts'oanang la likoloi tse peli ho ea pele, tsamaiso e qala mosebetsi oa tlhokomelo ea libaka tse foufetseng, e leng se hlahisang temoso ea boemo ba pele. , lehlakoreng le lumellanang la LED le lula le khantšitsoe, ho fihlela sepheo se tloha sebakeng sa alamo, hlakola temoso;

Ho kenya lihlahisoa

1. Setšoantšo sa ho kenya lihlahisoa

   

2. Setšoantšo sa Wiring
   
3. Tlhokomelo ea Tlhomamiso
   1. Tlosa (Tlosa) Mola o Mobe ho tsoa betiring pele o kenya.
   2. Ha u tlosa sehokelo, u se ke ua hula marapo ka thata haholo, ho seng joalo e ka senya marapo, Ha sehokelo se kenngoa, se lokela ho kenngoa ho fihlela ho fastening ea sebele (e-ba le lentsoe la fasten)
   3. Khoele e kentsoeng ka har'a marapo a koloi a nang le likhoele ka har'a sephutheloana, e le hore e se ke ea sisinyeha le ho se utloe molumo, 'me e khaole karolo e feteletseng ea maqhama a likhoele.
   4. Ha disassembly le installa1ion, ka kopo latela litlhoko tsa 1he tsa bukana ea tlhokomelo ea koloi, e lokela ho qoba tšenyo ea likarolo. Haeba u senyehile ka phoso, ka kopo fetola likarolo tse lumellanang.
4. Litlhoko tsa sebopeho sa sensor ea microwave
   1. Sensor ea Microwave (mohloli o tsoang holim'a metsi) e ka kenella feela ka har'a bumper ea polasetiki.
   2. Sensor ea Microwave (signal emission surface) ha e khone ho ba le tšepe ka pele, e tla ba tšitiso.
   3. Ka kopo u se ke ua kenya sensor ea microwave (signal emission surface) ka pel'a lebone la fluorescent.
5. Ho kenya lisebelisoa

   
   Hlophisa sebopeho sa mochini oa probe, 'me mokokotlo oa radar o shebile ka morao oa koloi le letšoao la "UP" le shebile holimo. U se ke ua kenya ka tsela e fosahetseng, haeba ho na le lintlha tse fosahetseng tse hlahang .

   

   1. Sensor e hlokahala ho kenngoa ka lehlakoreng la teraka. Bophahamo bo fapana ho 80-120 cm.
      Ka kopo hlokomela tataiso ea ho kenya li-sensor, U se ke ua kenya tsela e fosahetseng, ho seng joalo e tla ba boitsebiso bo fosahetseng.
6. Mohala oa sensor ka sebaka se se nang letho, hokela lebokoseng la taolo la Iha, lebokose la taolo ka kamoreng ea ho khanna ea kutu.
7. Ho ea ka letšoao le tšoailoeng ho Iha power cable, hokela ACC, Left Tum light, Right Tum light, reversing light, GND ho motlakase o tsamaisanang le koloi ka ho latellana.
8. Tsamaisa lithapo tse kholo ka lehlakoreng le letšehali ho ea setsing sa taolo ea teraka, 'me u kenye mabone a LED le buzzer.
   1. Mabone a LED a kentsoeng ho A kholomo ka ho le letšehali le ka ho le letona ka har'a koloi

      
   2. Buzzer e kentsoeng ka har'a polasetiki ea koloi e kholo, etsa bonnete ba hore ho na le molumo
      Li-wiring tse ling li ka bolela ho kenngoa ha setšoantšo sa kakaretso, ho kenya ts'ebetso ea kamehla.

Sisteme ea Tsamaiso

Ho hlaphoheloa ha likarolo tsa koloi

1. Confirm the installation status
   1. Pele o kenya motlakase, etsa bonnete ba hore wiring le ho kenya li tloaelehile.
   2. Ho hlahloba ka ho khethehileng hamess ea lithapo tsa koloi, haeba ho na le mochine o sa lokelang, o otlolle, o khomaretsoe joalo-joalo.
2. Matlafatsa
   1. Hokela boemelo ba betri (-) , ho etsa bonnete ba hore koloi e sebetsa hantle.
   2. Haeba ho na le ketsahalo e sa tloaelehang, hlahloba marapo a kentsoeng hore na a nepahetse.

Teko

1. Ho qala enjene ea teraka, ka mor'a hore matla a ACC a bone, mabone a LED a kentsoeng ka lehlakoreng le letšehali le le letona holim'a teraka A tla lula a khantša metsotsoana e 2 ka nako e le 'ngoe. Hape buzzer e tla lla hang, ho bolela hore litsamaiso li phethiloe. 'Me tsamaiso e tla kena tekong ea ho ikamahanya le maemo hang-hang. 5-8 metsotsoana ho kena boemong ba ho sebetsa

   

2. Ka mor'a hore tsamaiso e kene ka boemo ba ho sebetsa, ho lemoha mahlakoreng ka bobeli a koloi e ka morao sebakeng se foufetseng (ho koahela mahlakore ka bobeli a lane, bolelele ba limithara tse ka bang 20).
   Lokisetsa mothusi ho tsamaea ho tloha ka morao ho hole ho sensor, ho leka mabone a LED le ho sebetsa ha buzzer.
3.  Kamora ho lekola lits'ebetso tsohle, khutlisa likarolo tsohle tse arotsoeng ha u kenya, likarolo tsa koloi, bumper joalo-joalo.

Hlokomela

1. Boemong bo latelang, mochine oa microwave o ka 'na oa se ke oa khona ho lemoha ntho e lebisitsoeng kapa ho thata ho lemoha ntho e lebisitsoeng.
   • Koloi e sebakeng se ka morao se foufetseng sa tsela e haufi, empa koloi ha e haufi
   •  Koloi e tsamaea haufi le koloi ea hau nako e telele ka lebelo le tšoanang
   • Koloi e tloha ka lehlakoreng le leng
   • Likoloi tsa litselana tse haufi li leka ho u feta
   • Litsela tse haufi tsa koloi li pharaletse haholo, Sebaka sa ho lemoha ha sensor ea radar se behiloe ho bophara ba tsela.
2. Mabone a alann ea tsamaiso ea menoana le melumo e futhumatsang e ka 'na ea se ke ea etsoa kapa ea lieha maemong a latelang.
   • Ha koloi e fetoloa ho tloha litseleng tse peli ka ntle ho ea ho litsela tse haufi
   • Ha u khanna matsoapong
   • Ka maralla kapa thaba vertex
   • Tu ming radius e nyane (sharp tum mateanong a tsela)
   • Ho na le phapang ea bophahamo lipakeng tsa tsela ea ho khanna le tsela e haufi
3. Haeba bophara ba tsela e le moqotetsane, e ka 'nang ea lemoha litsela tse peli tsa likoloi.

Tharollo ya mathata ka kakaretso

Polelo

Sehlahisoa sena ke feela mokhanni ea thusang ho khanna le ho fetola litsela, ha e le hantle, mokhanni o tlameha ho ba ka tieo ho latela melao ea sephethephethe ho khanna, ho khanna kotsi e bakiloeng ke kotsi e bakiloeng ke kotsi, k'hamphani ha e ikarabelle.

Litokomane / Lisebelisoa

mehloli ea lefats'e ea C93 BSD Blind Spot Detection System bakeng sa Likoloi [pdf] Bukana ea Mosebelisi RF-5242752, 77G, 2621376, C93 BSD Blind Spot Detection System bakeng sa Likoloi, C93, BSD Blind Spot Detection System bakeng sa Likoloi, C93 BSD Blind Spot Detection System, BSD Blind Spot Detection System, Blind Detection Spot System, Blind Detection Spot System, Blind Detection Spot System. Tsamaiso

Litšupiso

• Bukana ea Mosebelisi