GLEDOPTO GL-C-301P ZigBee Pro Plus 5 In 1 LED Smart Controller

TAELO MOTSAMAI

MOHLALA: GL-C-301P

Parameter ea lihlahisoa

• Mohlala oa Sehlahisoa: GL-C-301P
• Keletso VoltagE: DC 12-24V
• Sephetho sa Hona Joale/Sekanale: 6A Max
• Kakaretso ea Sephetho sa Hona Joale: 10A Max
• Protocol ea Puisano: ZigBee 3.0 + 2.4G RF
• Mofuta oa Mohala o sisintsoeng: 0.5-1.5mm² (24-16AWG)
• Bolelele ba ho hlobolisa: 8-9mm
• lintho tse bonahalang: PC e sa cheseng mollo
• Tekanyo ea IP: IP20
• Mocheso oa ho sebetsa: -20 ~ 45 ℃
• Boholo: 42x38x17mm

Mosebetsi oa konopo

KHETHA:

Tobetsa e Khutšoanyane: Fetola tšebetso ea sesebelisoa sa hajoale (ho fetola tšebetso ea sesebelisoa ho tla hlakola likhokahano tsa Zigbee le RF)
Tobetsa nako e telele bakeng sa metsotsoana e 5: bulela / tima ts'ebetso ea memori (ts'ebetso ea memori e koetsoe ka boiketsetso, e etsa qeto ea hore na o hopole boemo ba matla pele o tima)

Khutlisa:

Tobetsa Nako e Khutšoane: Fetola maqhubu.
Tobetsa nako e telele bakeng sa metsotsoana ea 5: Khutlisa molaoli. (Ka mor'a ho tsosolosa, e khutlela ho RGBCCT).

Sututsa:

Tobetsa ka bokhuts'oane: Ho Bulela/Ho tima.
Tobetsa nako e telele: Fetola khanya (Ho nka: Khatiso e telele e eketsa khanya, e lokolla le ho tobetsa nako e telele hape e fokotsa khanya).

Litlhophiso tsa khafetsa

E le hore e sebetse ho lisebelisoa tse fapaneng tsa matla, maqhubu a sesebelisoa a ka khethoa e le 600Hz, 800Hz, 1000Hz, 2000Hz, 4000Hz, 8000Hz le 1000Hz ea kamehla. Tobetsa hakhutšoanyane habeli konopo ea "Set", frequency e tla fetohela ho e latelang. Letšoao le tla benya ka 'mala o mopinki' me le qalelle ho 'mala o fetileng ka mor'a ho "tima" bakeng sa metsotsoana e 2. Molao oa linako tse benyang bakeng sa maqhubu a fapaneng ka kopo sheba tafole

Boemo ba Leseli la Pontšo

Setšoantšo sa Wiring

RGBCCT:

Tlas'a ts'ebetso ea RGBCCT, mohala oa RGBCCT o ka hokahanngoa le sesebelisoa

RGBW:

Tlas'a ts'ebetso ea RGBW, mohala oa RGBW o ka hokahanngoa, ntle le khokahano ea "N" terminal.

RGB:

Tlas'a ts'ebetso ea RGB, mohala oa RGB o ka hokahana, ntle le khokahano ea "N" terminal.

CCT:

Tlas'a ts'ebetso ea CCT, likotoana tse peli tsa CCT li ka hokeloa, ntle le khokahano ea "N", empa likhoele tse bobebe li tla laoloa ka nako e le 'ngoe.

DIMMER:

Tlas'a ts'ebetso ea dimmer, likotoana tse hlano tsa mebala e le 'ngoe li ka hokahana, empa likhoele tse bobebe li tla laoloa ka nako e le ngoe.

Ho kopanya le Gateway

Ho Kopana le Marang-rang:

1. Hokela molaoli ho matla ka nepo.
2. Sebelisa sesebelisoa sa heke ho qala ho batla sesebelisoa, emela nako e itseng (sheba litaelo tsa heke ka 'ngoe). Haeba heke e sa fumane molaoli, leka ho matlafatsa molaoli hape kapa o e sete bocha.
3. Kamora hore heke e sibolle molaoli, eketsa molaoli kamoreng e khethiloeng kapa sehlopha.
4. Hang ha o kopantsoe le marang-rang, o ka qala ho sebelisa molaoli

Ho tloha Marang-rang:

Ho app, hlakola molaoli o lokelang ho tsoa marang-rang. Molaoli o tla benya ka makhetlo a 3, a bonts'a ho khaola ka katleho.

Hlokomela: Ho khaoha ha molaoli ho tla hlakola khokahanyo ea 2.4G RF ebe o kenya boemo ba ho tsosolosa.

Sehlahisoa se sebetsa le tse ngata tsa ZigBee 3.0 Gateways tse kang Philips Hue, Amazon ECho Plus kapa Smart Things.

Remote Control pairing / Unpairing

Ho kopanya:

1. Koala selaoli, ebe o bula ka mor'a metsotsoana e 10.
2. Ka mor'a metsotsoana e 4 ho qala, tobetsa konopo ea "On" ea sehlopha leha e le sefe se ho remote control ea RF (sheba bukana ea mosebelisi ea remote ka 'ngoe bakeng sa lintlha tse ling).
3. Ha leselinyana le hoketsoeng ho molaoli le benya, le bonts'a ho hokahana le remote control ka katleho.

Ho se sebetse:

1. Koala selaoli, ebe o bula ka mor'a metsotsoana e 10.
2. Ka mor'a metsotsoana e 4 ho qala, tobetsa konopo ea "Master On" ho remote control ea RF kapa u tobetse konopo ea "On" ea sehlopha sa molaoli makhetlo a 5.
3. Ha leselinyana le hoketsoeng ho molaoli le benya, le bontša ho khaoha ho tsoa ho remote control.

2.4GHz Mosebetsi oa Memori ea Remote Control Scene:

1. Tobetsa konopo (S1,S2,S3,S4) ea remoutu ho kenya tšebetsong ea menory.
2. Tobetsa nako e telele ho boloka ketsahalo; Tobetsa nakoana ho kenya ketsahalo.

E lumellana le 2.4G RF Remote Control

Tlhaloso ea Mokhoa

1. E tsitsitseng Mofuthu o Mosoeu
2. Mobala o mosoeu oa Letsatsi le tsitsitseng
3. Static Cold white
4. Mobala o mofubelu o tsitsitseng

5. Mobala o Motala o tsitsitseng
6. 'Mala o Putsoa o tsitsitseng
7. 16 Million Color Gradient
8. RGB Color Jumping

9. Phefumoloho ea Mobala (Khanya e fetoha butle-butle ho tloha ho 100% ho ea ho 0%, ebe e khutlela ho 100% ho 0% ka tatellano. Ho fetola 'mala kapa mocheso oa' mala o ka fetola mebala ka mokhoa ona, tobetsa konopo ea "M" ho tsoa ka mokhoa ona).

E lumellana le 2.4G RF Remote Control

Selaoli sena se ka lokisa boemo ka ho sebelisa likonopo tsa remote control.

Seta Mokhoa

1. Hlahisa konopo hape: Tobetsa 'me u tšoare konopo ea RESET bakeng sa metsotsoana e fetang 5, lesela le khanyang le bonesa ka makhetlo a 3, ho bontša hore reset e felile.

2. Power On/Off seta bocha:

1. Matla holim'a selaoli sa hlobolisa leseli.
2. Ka metsotsoana e 2, khaola motlakase.
3. Emela bonyane metsotsoana e 5 ho netefatsa hore motlakase o tima ka ho feletseng.
4. Pheta mehato e ka holimo makhetlo a 5.
5. Leseli le khanyang le tla benya ka makhetlo a 3, e leng se bontšang hore reset e felile.

Hlokomela: Molaoli o tla khutlela mosebetsing oa RGBCCT le ho hlakola likhokahano tsa Zigbee le RF ka mor'a ho tsosolosa.

1. Pele o bulela matla, ka kopo netefatsa hore lithapo tsohle li nepahetse ebile li sireletsehile. Se ke oa sebetsa ha motlakase o ntse o le teng.
2. Sebelisa sehlahisoa tlas'a voltage, Overvoltage kapa undervolvetage ka senya molaoli.
3. U se ke ua qhaqha sehlahisoa, kaha se ka baka mollo le ts'oaetso ea motlakase.
4. Se ke oa sebelisa sehlahisoa letsatsing le tobileng, damp, mocheso o phahameng, kapa libaka tse ling tse thata.
5. U se ke ua sebelisa sehlahisoa libakeng tse sirelelitsoeng ka tšepe kapa haufi le libaka tse matla tsa makenete, kaha li tla ama haholo phetisetso ea sianal e se nang mohala ea sehlahisoa.

TS'OANELO MOTS'OANE

• Ka lebaka la ho tsoela pele ho amohela mahlale a macha, litlhaloso tsa sehlahisoa li ka fetoha ntle le tsebiso pele.
• Bukana ena ke ea litšupiso le merero ea tataiso feela. t ha e fane ka tiiso ea ho lumellana ka ho feletseng le sehlahisoa sa sebele. Ka kopo, sheba sehlahisoa sa sebele bakeng sa lisebelisoa tse sebetsang.
• Likarolo le lisebelisoa tse hlalositsoeng bukeng ena ha li emele tlhophiso e tloaelehileng ea sehlahisoa, tlhophiso e ikhethileng e ipapisitse le likahare tsa sephutheloana.
• Lingoliloeng tsohle, litafole le litšoantšo tse bukeng ena li sirelelitsoe ke melao e amehang ea naha 'me li ka se sebelisoe ntle le tumello ea k'hamphani ea rona.
• Sehlahisoa sena se sebelisana le lihlahisoa tsa batho ba bang (joalo ka lits'ebetso, li-hubs, joalo-joalo) joalo ka ha ho boletsoe ho chate ea li-gateway. Leha ho le joalo, k'hamphani ea rona ha e nke boikarabello bakeng sa mathata afe kapa afe a ka hlahisoang ke liphetoho tse entsoeng ke lihlahisoa tsa batho ba bang, tse bakang ho se lumellane kapa tahlehelo e itseng ea ts'ebetso.

LED-Khoebo Tobias Ebert

Schoeneicher Str. 42, Schoeneiche b.

Berlin, Jeremane, 15566
0049 30 641 68917

info@led-trading.de

Litlhaloso:

• Litekanyo: 17mm x 42mm x 38mm
• Likhetho tsa Khafetsa: 600Hz, 800Hz, 1000Hz, 2000Hz, 4000Hz, 8000Hz (kamehla: 1000Hz)

---

FAQs

Nka seta selaoli bocha joang?

Ho seta selaoli bocha, tobetsa konopo ea Reset bakeng sa metsotsoana e 5. Ka mor'a ho tsosolosa, e khutlela mosebetsing oa RGBCCT.

Ke liheke life tse lumellanang le sehlahisoa?

Sehlahisoa se sebetsa le ZigBee 3.0 Gateways joalo ka Philips Hue, Amazon Echo Plus, kapa SmartThings.

Litokomane / Lisebelisoa

GLEDOPTO GL-C-301P ZigBee Pro Plus 5 In 1 LED Smart Controller [pdf] Litaelo GL-C-301P, GL-C-301P ZigBee Pro Plus 5 In 1 LED Smart Controller, ZigBee Pro Plus 5 In 1 LED Smart Controller, 5 In 1 LED Smart Controller, LED Smart Controller, Smart Controller

Litšupiso

• Bukana ea Mosebelisi