Buka ea mosebelisi ea GigaDevice GD-Link Programmer

 

Mofuta: Senyesemane V 1.2

 

1. Selelekela

Bukana ena ea mosebedisi e hlalosa ts'ebeliso e sebelisoang ho sebelisa flash kapa ho lokisa li-MCU tsa GigaDevice tse nang le thapo ea USB e fumanehang le adaptara ea GD-Link. Lenaneo la GD-Link ke sesebelisoa sa mosebelisi ho sebelisa li-MCU ka lebelo le holimo.

1.1 Tlhaloso ea mosebetsi

Ka GD-Link programmer, mosebelisi a ka khoasolla lenaneo la ts'ebeliso mohopolong oa ka hare oa flash kapa chip e bolokehileng joalo-joalo, ka nako e ts'oanang moqapi a ka hlophisa ts'ebetso ea ho jarolla kantle ho marang-rang ea GD-Link.

1.2 Sepheo

Ntle le e phethahetseng stage bakeng sa basebelisi ho khoasolla lenaneo la ts'ebeliso ka lebelo le holimo, moqapi oa GD-Link le eena o ikemiselitse ho fana ka boiphihlelo bo monate le bo boqapi. Tlhaloso e lokiselitsoe tšebeletso e betere.

1.3 Tikoloho ya tshebetso

Litlhoko tsa Software: Sechaena kapa Senyesemane Windows XP, Windows 7 le sistimi e tsoetseng pele ea ts'ebetso.

Litlhoko tsa Hardware: Adapter ea GD-Link, e buang ka Buka ea Mosebelisi ea Adapter ea GD-Link.

1.4 Jargon le Contraction

• Sehokelo sa GD: Adapter ea GD-Link ke sesebelisoa sa nts'etsopele ea mefuta e meraro ho e le 'ngoe bakeng sa letoto la li-MCU tsa GD32. E fana ka boema-kepe ba debugger ea CMSIS-DAP le JTAG/ SWD interface. Mosebelisi a ka sebelisa adaptara ea GD-Link bakeng sa mananeo a inthaneteng kapa khoutu ea debug ho IDE e tsamaisanang joalo ka Keil kapa IAR. Mosebetsi o mong oa bohlokoa ke mananeo a offline.
• USB: Universal Serial Bus (USB) e hokela ho feta likhomphutha le li-peripheral. E na le matla a ho u hokahanya le lefats'e le lecha la liphihlelo tsa PC.

1.5 Sebopeho sa sephutheloana

Tsohle files tse thathamisitsoeng ho Chate ea 1 lia hlokahala.

 

2. Ho matha

Software ena e sebetsa ho PC le likhomphutha tse tsamaellanang, le sethaleng sa WINDOWS. Ha ho na tlhoko ea ho seta software, ntho feela eo u hlokang ho e etsa ke ho tobetsa aekhone ho sebetsa software.

 

3. Ho Sebelisa Lintlha

3.1 Kenyelletso ea moralo

Chate 2 e bonts'a UI mme e kenyelletsa libaka tsa software:

3.1.1 Fesetere ea Thepa 

Chate ea 3 e bonts'a thepa e mabapi le GD-Link le sepheo sa MCU. Ka tatellano ho tloha holimo ho ea tlase:

3.1.1.1 Thepa ea GD-Link

• Connect Interface: GD-Link sebelisa USB hokela ho PC
• Sesebelisoa sa Sesebelisoa: Basebelisi ba ka khetha SWD kapa JTAG ho hokela ho MCU, khetho ea kamehla ke SWD.
• Mofuta oa Firmware: Mofuta oa hona joale oa firmware oa MCU.
• UID: E bonts'a UID ea MCU ho GD-Link.
• SN: E bonts'a nomoro ea seriale ea GD-Link.

3.1.1.2 JTAG/Thepa ea SWD

Lebelo la Pele: Basebelisi ba ka fetola lebelo la phetisetso ea GD-Link mona, lebelo la kamehla ke 500 kHz.

3.1.1.3 Sepheo sa Thepa ea MCU

• Karolo ea MCU No.: E bonts'a MCU e hokahaneng.
• Endian: GD MCU ha e na pheletso e nyane.
• Sheba ID ea mantlha: Khetho ea kamehla ke E.
• Core ID: E bonts'a boleng ba ID ea mantlha ea MCU.
• Sebelisa RAM: Khetho ea kamehla ke E, RAM e sebelisoa ho hlophisa kapele.
• Aterese ea RAM: E bonts'a boleng ba aterese ea ho qala ea RAM.
• Boholo ba RAM: E bonts'a boholo ba RAM ea sepheo sa MCU.
• UID: E bonts'a UID ea sepheo sa MCU.

3.1.1.4 Thepa ea Flash

• Saese ea Flash: E bonts'a boholo ba flash ea sepheo sa MCU. MCU e fapaneng mohlomong e na le boholo bo fapaneng ba Flash le lirekoto tse fapaneng tsa ho hlakola / lenaneo, basebelisi ba ka sheba Buka ea Mosebelisi ea MCU bakeng sa lintlha.
• Aterese ea Flash Base: E bonts'a boleng ba aterese ea Flash base.

3.1.2 Hlahisa Lethathamo la Thepa

Konopo ena e lumella lethathamo la thepa ea ho khatholla basebelisi ntle le ho koala sesebelisoa sena (Joalokaha ho bontšitsoe ho chate 4).

3.1.3 GD-Sehokelo

Lenane lena le kenyeletsa Update file, Lokisa GD-Link le Update firmware (Joalokaha ho bontšitsoe chate

• Karolo ea MCU No.: E bonts'a MCU e hokahaneng.
• Endian: GD MCU ha e na pheletso e nyane.
• Sheba ID ea mantlha: Khetho ea kamehla ke E.
• Core ID: E bonts'a boleng ba ID ea mantlha ea MCU.
• Sebelisa RAM: Khetho ea kamehla ke E, RAM e sebelisoa ho hlophisa kapele.
• Aterese ea RAM: E bonts'a boleng ba aterese ea ho qala ea RAM.
• Boholo ba RAM: E bonts'a boholo ba RAM ea sepheo sa MCU.
• UID: E bonts'a UID ea sepheo sa MCU.

3.1.1.4 Thepa ea Flash

• Saese ea Flash: E bonts'a boholo ba flash ea sepheo sa MCU. MCU e fapaneng mohlomong e na le boholo bo fapaneng ba Flash le lirekoto tse fapaneng tsa ho hlakola / lenaneo, basebelisi ba ka sheba Buka ea Mosebelisi ea MCU bakeng sa lintlha.
• Aterese ea Flash Base: E bonts'a boleng ba aterese ea Flash base.

3.1.2 Hlahisa Lethathamo la Thepa

Konopo ena e lumella lethathamo la thepa ea ho khatholla basebelisi ntle le ho koala sesebelisoa sena (Joalokaha ho bontšitsoe ho chate 4).

3.1.3 GD-Sehokelo

Lenane lena le kenyeletsa Update file, Lokisa GD-Link le Update firmware (Joalokaha ho bontšitsoe chate 7).

3.1.3.1 Nchafatso File
Menu ena e ka ntlafatsa file ho boloka ho GD-Link bakeng sa mananeo a kantle ho marang-rang.
Basebedisi ba lokela ho khetha karolo ea MCU No., ebe o tobetsa 'Add' ho khetha file ka sebopeho sa bin le ho kenya aterese ea ho jarolla pele pele o ka ntlafatsa file(Joalokaha ho bontšitsoe chate 5).
Qetellong, basebelisi ba ka tobetsa 'Update' ho boloka tse thathamisitsoeng files ho GD-Link. Haeba e bolokiloe ka katleho, basebelisi ba tobetsa konopo ea 'K1' ho GD-Link, GD-Link e khoasolla kaofela files ho aterese e tsamaisanang le eona.
Karolo e 'ngoe No. e tšehetsa khetho ea li-byte tlhophiso, GD-Link e lokisa li-byte tsa khetho ea MCU ho latela boitsebiso bo hlophisitsoeng ke mosebedisi (Joalokaha ho bontšitsoe chate 6).

3.1.3.2 Hlophisa GD-Link

Lenane lena le kenyelletsa Configuration ea Offline-Programming, Online-Programming Configuration 7/11 le Product SN likarolo tse tharo (Joalokaha ho bontšitsoe chate 8, lenane lena le tla eketsa ts'ebetso ka ho nchafatsa firmware).

• Offline-Programming Configuration: Lenane lena le lokisa hore na chip e bolokehile ka mor'a -programming -programming. E tla sebetsa ka mor'a lenaneo la ntlafatso files.
• Tlhophiso ea Mananeo a Marang-rang: Lenane lena le lokisa hore na chip e bolokehile ka mor'a ho etsa mananeo a marang-rang, hore na e seta bocha pele ho mananeo a marang-rang, le hore na a tsamaisoa ka mor'a lenaneo la inthaneteng. E tla sebetsa ha o tobetsa konopo ea "OK".
• Sehlahisoa SN: Lenane lena le lokisa boleng ba sehlahisoa sa SN kamora ho etsa mananeo a marang-rang (Joalokaha ho bonts'itsoe ho chate 8). Lekola lebokose le bolelang ho ngola sehlahisoa SN ho shebisa MCU kamora ho etsa mananeo a marang-rang. Basebelisi ba hlophisa aterese ho ngola sehlahisoa sa SN, boleng ba SN ba sehlahisoa le boleng ba keketseho ea sehlahisoa SN.

3.1.3.3 Firmware ea ntlafatso
Lenaneo lena la ho ntlafatsa firmware ea GD-Link haeba GD-Link e le boemong ba ntlafatso ea firmware. Ka kopo etsa bonnete ba hore software ea hau ke mofuta oa morao-rao pele o ka nchafatsa firmware ea hau ea GD-Link.

3.1.4 Sepheo sa MCU 

Leqephe lena le kenyeletsa Connect, Disconnect le menus a mang a tshebetso (Joalokaha ho bontshwa chate 9).

• Hokela: Basebelisi ba tlameha ho tobetsa lethathamo lena pele ba sebelisa sepheo sa MCU ka likhutšoane tsa keyboard F2.
• Hakolla: Lenane lena le ea sebetsa ka mor'a hore ho hokeloe ho atlehe, e sebelisoa ho khaola ho tloha ho target MCU.
• Tšireletso: Tšireletso e kenyelletsa mekhahlelo e 'meli, letoto la GD10x ke boemo bo tlaase feela bo ka behoang ha lihlopha tsa GD1x0 li ka sebelisa maemo a mabeli. Letoto la GD1x0 la MCU le ke ke la fetoloa ho se sireletsehe haeba le ka beoa maemong a holimo.
• Ho se sireletsehe: Ho tobetsa lethathamo lena ho ka tlosa ts'ireletso ea boemo bo tlase.
• Lokisa OptionBytes: Basebelisi ba ka sebelisa lethathamo lena ho fetola li-byte tsa khetho.
• Hlakola ka Bongata: Basebelisi ba ka sebelisa lethathamo lena ho hlakola chip e felletseng ka likhutšoane tsa keyboard F4. Mohlomong basebelisi ba hloka ho ema hanyane ha boholo ba MCU Flash bo feta 512KB.
• Hlakola Leqephe: Lenane lena le lumella basebelisi ho hlakola MCU ka maqephe a nang le likhaoletso tsa keyboard F3.
• Lenaneo: Lenaneo la khetho file ho ea ho sepheo sa MCU. Software e tla boloka chip le ho ngola sehlahisoa SN haeba basebelisi ba lokiselitse ts'ireletso ka mor'a likhetho tsa mananeo a marang-rang ho "Configuration" menu.
• Lenaneo le Tsoelang Pele: Ts'ebetso ena e nolofalitsoe ha software e ntse e hokela ho tsoa ho sepheo sa MCU. Software e tla bona hore na MCU e ncha e sebetsa ka bo eona ebe e hokela ho MCU. Ebe software e tla hlophisa MCU e ncha ka khetho ea hajoale file ebe o emela khokahano e latelang ea MCU.
• Bala Lintlha: Ka ts'ebetso ena mosebelisi a ka bala sepheo sa MCU ka mekhoa e 'meli: Bala chip e felletseng kapa Bala ka mefuta.
• Run App: Tsamaisa lenaneo file ka mor'a lenaneo.

3.2 Phallo ea Tšebetso ea Ts'ebetso

 

4. Ho ela hloko

Ka kopo etsa bonnete ba hore GD-Link e hokahane le PC.

 

5. Nchafatso

U ka ea ho ofisiri websebaka http://gd32mcu.com/cn/download ho fumana mofuta oa moraorao.

 

GigaDevice Copyright © 2021

 

Bala haholoanyane ka Bukana ena & Khoasolla PDF:

Litokomane / Lisebelisoa

GigaDevice GD-Link Programmer [pdf] Bukana ea Mosebelisi Lenaneo la GD-Link, GD-Link, Moetsi oa Lenaneo

Litšupiso

• Bukana ea Mosebelisi