GEPRC-logo

GEPRC GEP-35A-F7 AIO Flight Controller

GEPRC-GEP-35A-F7-AIO-Flight-Controller-product

Litlhaloso tsa Sehlahisoa

  • Lebitso la Mohlala: EA-35A-F7
  • MCU: Setšoantšo sa STM32F722
  • IMU: MPU6000 gyro/accelerometer(SPI)
  • Sepheo sa firmware: GEPRCF722
  • OSD: Betaflight OSD w/ AT7456Ev
  • Sensor ea Hona Joale: Ee
  • Tšehetso ea OSD: Ee
  • Beeper: Ee
  • LED: Ee
  • USB: USB e nyane
  • Tlhahiso ea BEC: 5V @ 1A
  • Filter ea LC e kopaneng
  • ESC MCU: BB21F16G
  • Tsoela Pele: 35A
  • Max Hona Joale: 45A (bo10)
  • Kenyo: 2 ~ bo6
  • E ts'ehetsa: Dshot600, Oneshot, Multishot
  • Metara ea hajoale: 210
  • Sepheo: G_H_30
  • Boholo: 32x32 limilimithara
  • Hole ea ho Kenya Boto: 26.5×26.5mm, M2
  • Boima ba 'mele: 8.3g

Litaelo tsa Tšebeliso ea Sehlahisoa

Kemiso:

Ensure the ESC MCU is securely connected to the flight controller.

Tlhophiso:

  • Connect the micro USB to a compatible power source.
  • Use Betaflight OSD for configuration settings.

E Matlafatsa:

Apply power within the input range of 2~6S for optimal performance.

Ho fofa:

  • Check all connections and settings before flight.
  • Utilize Dshot600, Oneshot, or Multishot as per your preference.

Setšoantšo sa Thupelo

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-1

DJI Digital FPV Sistimi

Note: not all combinations are valid. When the flight controller firmware detects this the serial port configuration will be reset.
Note: Do NOT disable MSP on the first serial port unless you know what you are doing. You may have to reflash and erase your configuration if you do.

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-2

Moamoheli

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-3

F. Port

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-4

Mollo oa mollo oa TBS Nano RX

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-5

FlySky FSA8S V2

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-6

VTX

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-7GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-8

Khamera

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-8

LED & Buzzer

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-10

GPS

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-11

Lintlha tse ling

GEPRC-GEP-35A-F7-AIO-Flight-Controller-fig-12

Lipotso Tse Botsoang Hangata

Q: Nka ntlafatsa firmware ho GEP-35A-F7 joang?

A: To update the firmware, connect the device to a computer using the micro USB cable and use Betaflight Configurator to flash the latest firmware.

P: Ke matla a fe a khothaletsoangtagmofuta oa GEP-35A-F7?

A: The kgothaletswa input voltage range is between 2 and 6 cells (2~6S) for optimal performance.

P: Nka hlahloba tšebeliso ea hona joale ea drone ea ka ka GEP-35A-F7?

A: The GEP-35A-F7 features a current meter that can be monitored through the Betaflight OSD during flight.

Litokomane / Lisebelisoa

GEPRC GEP-35A-F7 AIO Flight Controller [pdf] Buka ea Taelo
GEP-35A-F7, ​​TEW27330000, R001, GEP-35A-F7 AIO Flight Controller, GEP-35A-F7, ​​AIO Flight Controller, Flight Controller, Controller

Litšupiso

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *