Foxwell NT680PLUS Sistimi Tsohle mme Tsohle li etsa Tataiso ea Mosebelisi ea Scanner

Smart VIN

Smart VIN allows to identify a vehicle by automatically reading the vehicle identification number (VIN).
Ho tsebahatsa koloi ka SmartVIN:

1. Tsamaisetsa ka likonopo tsa metsu ho totobatsa Diagnostic ho tsoa ho menu e kholo ebe o tobetsa konopo ea ENTER ho qala. Haeba u na le sesebelisoa se abetsoeng e 'ngoe ea linotlolo tsa tšebetso tlase skrineng, u ka tobetsa konopo ea ts'ebetso ho qala ts'ebeliso.
   
   Setšoantšo sa 4-9 Sample Main Menu Screen
2. Skrine se nang le libaka tsa moetsi oa likoloi sea hlaha. Khetha sebaka seo lebitso la koloi le hlahang ho sona. Lethathamo la likoloi tse hlahisoang.
   
   Setšoantšo sa 4-10 Sample Skrine sa Khetho ea Sebaka sa Moetsi oa Likoloi
3. Khetha moetsi oa koloi. Lethathamo la likhetho tsa likhetho tsa likoloi tse bonts'ang.
   
   Setšoantšo sa 4-11 Sample Skrine sa Khetho ea Likoloi
4. Select SmartVIN from the menu, and press the ENTER key.
   
   Setšoantšo sa 4-12 Sample VIN Reading Screen
5. Sesebelisoa se qala ho buisana le koloi ebe se bala Tlhaloso ea Koloi kapa Khoutu ea VIN ka bo eona.
   
   Setšoantšo sa 4-13 Sample Screen ea ho Bala ea VIN ea Automatic
6. Araba ka YES haeba Tlhaloso ea Koloi kapa khoutu ea VIN e nepahetse 'me lethathamo la likhetho tsa balaoli li hlaha. Araba NO haeba e fosahetse, 'me u lokela ho kenya nomoro e nepahetseng ea VIN ka letsoho.
   
   Setšoantšo sa 4-14 Sample Manual VIN Entry Screen

Khetho ea Matsoho

Khetho ea Matsoho identifies a vehicle by making several selections according to certain VIN characters, such as model year, and engine type.
To identify a vehicle by manual vehicle selection

1. Refer to step 1-30f4.2.1 SmartVIN
2. Sekrineng se seng le se seng se hlahang, khetha khetho e nepahetseng ebe o tobetsa konopo ea ENTER. Etsa sena ho fihlela lintlha tse felletseng tsa koloi li kentsoe le lethathamo la khetho ea balaoli.
   
   
   
   Setšoantšo sa 4-15 Sample Skrine sa Khetho ea Likoloi ka Manual

Ts'ebetso ea Ts'oaetso

Karolo ena e bonts'a mokhoa oa ho sebelisa sehatisi ho bala le ho hlakola likhoutu tsa mathata a tlhahlobo, le view ‘live’ data readings and ECU information on controllers installed on a variety of vehicles and also save “recordings’ of the data readings

Khetho ea Mojule oa Laola

When you completed the identification of vehicle, you have to identify the control modules installed in the vehicle.
There are two ways to identify the controllers installed in a car:

• Quick Scan
• Control Module

Quick Scan

Quick Scan performs an automatic system test to determine which control modules are installed on the vehicle and provides diagnostic trouble codes (DTCs) overview. Ho latela palo ea li-module tsa taolo, ho ka nka metsotso e 10 kapa ho feta ho qeta tlhahlobo.
To perform an automatic system scan

1. Scroll with the arrow keys to highlight Quick Scan from the menu and press ENTER to start
   
   Setšoantšo sa 5-1 Sample Quick Scan Screen
2. To pause the scan, press the function key corresponding with Pause on the screen
   
   Setšoantšo sa 5-2 Sample Quick Scan Screen
3. At the end of successful automatic controller scan, a menu with a list of installed controllers together with their DTC overview dipontsho.
   
   Setšoantšo sa 5-3 Sample Quick Scan Screen
4. Haeba ho na le likhoutu tsa bothata ba tlhahlobo e fumanoeng karolong ea taolo, tobetsa konopo ea ts'ebetso e tsamaellanang le Report skrineng ho view lintlha tsa lintlha tsa khoutu. Kapa tobetsa konopo ea tshebetso Hlakola ho li hlakola.
   
   Setšoantšo sa 5-4 Sample Report Screen
5. Press function key F1 to save the trouble code information
6. Khetha sistimi eo u batlang ho e leka, ebe o tobetsa konopo ea ENTER. Ha scanner e se e thehile khokahano le koloi, Menu ea Mosebetsi e tla hlaha.
   
   Setšoantšo sa 5-5 Skrine sa Menu ea Mosebetsi

Control Modules

Control Modules screen displays all conf rollers available on the vehicles. The controllers listed on the menu do not mean that they are installed on the vehicle.
To celesta system for testing

1. Scroll with the arrow keys to highlight Control Modules from the menu and press the ENTER key. A controller menu displays.
   
   Setšoantšo sa 5-6 Sample Control Modules Screen
2. Select the system you would like to test. When the scanner has established connection with the vehicle, the Control Module displays.
   
   Setšoantšo sa 57 Sample Control Modules Screen

Ts'ebetso ea Ts'oaetso

After a system is selected and the scanner establishes communication with the vehicle, the Function Menu displays.
The menu options may include:

• Litaba tsa ECU
• Bala Melao
• Hlakola Likhoutu
• Live Data

HLOKOMELA
Ha se likhetho tsohle tsa ts'ebetso tse thathamisitsoeng ka holimo tse sebetsang likoloing tsohle. Likhetho tse teng li ka fapana ho ea ka selemo, mohlala, le mofuta oa koloi ea tlhahlobo.

Lintlha tsa ECU

Lintlha tsa ECU screen displays the identification data of the control module under test, such as the control module identification string, the control module coding, and Work Shop Code.
Ho bala lintlha tsa ECU:

1. Khetha Lintlha tsa ECU ho tsoa ho menu ebe o tobetsa konopo ea ENTER.
   
   Setšoantšo sa 58 Sample Skrine sa Menu ea Mosebetsi
2. Skrine se nang le lintlha tse qaqileng tsa mojule oa taolo o khethiloeng.
   
   Setšoantšo sa 5-9 Sample ECU Information Screen
3. Press function key Save to store ECU information. Or use the BACK key to exit.

Bala Melao

Bala Melao menu lets you read trouble codes found in the control unit
Maemo a tloaelehileng a khoutu a kenyelletsa:

• Likhoutu tsa Hona Joale / Tsa Ka ho sa Feleng/ Tsa Hona Joale
• Likhoutu tse Emetseng
• Likhoutu tsa Histori

Likhoutu tsa hona joale / tse sa feleng / tsa hajoale tse bolokiloeng mochining oa taolo li sebelisoa ho thusa ho tseba sesosa sa bothata kapa mathata a koloi. Likhoutu tsena li etsahetse ka makhetlo a mangata 'me li bontša bothata bo hlokang ho lokisoa.

Pending codes are also referred to as maturing codes that indicate intermittent faults. If the fauit does not oceur within a certain number of drive cycles (depending on vehicle), the code clears from memory. If a fault occurs a specific number of times, the code matures into a DTC and the MIL illuminates or blinks.
Likhoutu tsa nalane li boetse li bitsoa likhoutu tse fetileng tse bonts'ang li-DTC tsa nakoana tse sa sebetseng hajoale.
Ho bala likhoutu koloing:

1. Scroll with the arrow keys to highlight Read Codes from Function Menu and press the ENTER key. A code list including code number and its description displays.
   
   Setšoantšo sa 5-10 Sample Skrine sa Menu ea Mosebetsi
2. Use the up and down arrow keys to scroll through data to select lines, and left and right armow keys to scroll back and forth through different screens of data.
   
   Setšoantšo sa 5-11 Sample Code Screen
3. Tobetsa konopo ea tshebetso Boloka ho boloka tlhahisoleseding ya DTC. Tobetsa konopo ea tshebetso Emisa Frame ho view homisa data.
   
   Setšoantšo sa 5-12 Skrine sa Data Frame Data
   Fetola Lintlha tsa Frame: a snapshot of critical vehicle operating conditions automatically recorded by the on-board computer at the time of the DTC set. Itis a good function to help determine what caused the fault
4. Sebelisa linotlolo tsa motsu ho le letšehali le ka ho le letona ho tsamaisetsa pele le morao ka har'a li-skrini tse fapaneng tsa data.
5. Tobetsa konopo ea tšebetso Boloka ho boloka tlhahisoleseding ea foreimi ea leqhoa. Kapa sebelisa konopo ea BACK ho tsoa.

Hlakola Likhoutu

Hlakola Likhoutu menu lets you to clear all current and stored DTCs from a selected control module. Also it erases all temporary ECU information, including freeze frame. So make sure that the selected system is completely checked and serviced by technicians and no vital information will be lost before clearing codes.

HLOKOMELA

• Ho hlakola likhoutu, etsa bonnete ba hore senotlolo sa ho tima se BUTSE ha enjene e tima.
• Clear Codes does not fix the problem that caused the fault DTCs should only be erased after correcting the condition(s) that caused them.

Ho hlakola likhoutu:

1. Scroll with the arrow keys to highlight Clear Codes from Function Menu and press the ENTER key
   
   Setšoantšo sa 5-13 Sample Skrine sa Menu ea Mosebetsi
2. Latela litaelo tse skrineng 'me u arabe lipotso mabapi le koloi e lekoang ho phethela tšebetso.
   
   Setšoantšo sa 5-14 Sample Hlakola Likhoutu Screen
3. Sheba likhoutu hape. Haeba ho na le likhoutu tse setseng, pheta mehato e Hlakileng ea Melao.

Live Data

Live Data menu lets you view and record real time PID data from a selected vehicle electronic control
mojule
Hangata, likhetho li kenyelletsa:

• Lethathamo le Feletseng
• Lethathamo la Tloaelo

Complete Data List
Lethathamo le Feletseng menu lets you view all live PID data from a selected system

Hoview Lintlha tsa PID tse phelang:

1. Tsamaisetsa ka likonopo tsa metsu ho totobatsa Live Data ho tsoa ho menu ebe o tobetsa konopo ea ENTER.
   
   Setšoantšo sa 5-15 Sample Skrine sa Menu ea Mosebetsi
2. Khetha Lethathamo le Feletseng ho tsoa ho menu ebe o tobetsa konopo ea ENTER ho hlahisa skrine ea data.
   
   Setšoantšo sa 5-16 Sample Live Data Menu Screen
3. Tsamaisetsa ka likonopo tsa metsu ea holimo le tlase ho totobatsa mola, le linotlolo tsa motsu o ka ho le letšehali le ka ho le letona ho tsamaisetsa pele le morao ka har'a li-skrini tse fapaneng tsa data. Tobetsa konopo ea tšebetso Emisa ho emisa ho bokella lintlha koloing ebe u sebelisa konopo ea Start ho qala hape ho bokella data. Ho rekota data mohopolong wa sekena, sebedisa konopo ya tshebetso BOLOKA, ebe o tobetsa Stop Saving ho emisa ho rekota neng kapa neng.
   
   Setšoantšo sa 5-17 Sample Live Data Screen
4. Use up and down arrow key to select line. If Graph is highlighted, it indicates graphing is available for the selected line. Press the function key Graph to display the PID graph
   
   Setšoantšo sa 5-18 Sample PID kerafo skrine
5. Tobetsa konopo ea tšebetso Li-graph tse ngata ho hlahisa li-graph tse peli tsa PID skrineng se le seng. Tobetsa Kerafo e le 'ngoe ho view one plot
   
   Setšoantšo sa 5-19 Sample tse peli tsa PID Graph Screen
6. Press the function key Merge Graph to display two PID plots in one coordinate to check how they
   affect each other.
   
   Setšoantšo sa 5-20 Sample Merge Graph Screen
7. Press the Back key to retum to the previous menu

Lethathamo la Tloaelo

Lethathamo la Tloaelo menu lets you to minimize the number of PIDs on the data list and focus on any suspicious or symptom-specific data parameters.

To create a custom data list

1. Khetha Custom List ho tsoa ho menu ebe o tobetsa konopo ea ENTER.
   
   Setšoantšo sa 521 Sample Live Data Menu Screen
2. The custom data selection screen displays. Scroll with the up and down arrow keys to highlight a line, press the ENTER key and then repeat the action to make more selections. To deselect an item, select it again and then press the ENTER key. Alternatively, use the function keys Select All and Deselect to select or deselect all items at once.
   
   Setšoantšo sa 5-22 Sample Custom List Selection Screen
3. Ha o qetile ho khetha, sebelisa konopo ea tshebetso OK ho hlahisa lintho tse khethiloeng.
   
   Setšoantšo sa 5-23 Sample Live Data Screen

Tlhokomelo

HLOKOMELA
NT680 Lite e tšehetsa

• EPB
• TS'EBETSA OLI

NT680 e tšehetsa

• EPB
• TS'EBETSA OLI

NT680 Pro e ts'ehetsa lits'ebeletso tsohle tse latelang le ts'ebetso ea tlhokomelo.

• AFA
• ANG_CHANGE
• AIRBAG_RESET
• PUSELETSO
• TSOHLE MATSO
• PFP
• BRT
• SAS
• SEAT MATCH
• CHANGE_TIRE_SIZE
• LEHLABA
• PHEELLO
• CVT
• TC MOIL
• DPF
• TPMS
• EPB
• TPS
• EVAPTEST
• TRANSMISSION_ADAPTION
• GEAR LEARN
• TURBO
• HLOOHOAMP
• MOHAKOA MOHAPI
• MOEKETSI
• OILRESET

Karolo ena e fana ka litaelo tse khutšoane tsa ts'ebetso ea ts'ebeletso le tlhokomelo e hlokoang haholo. Lits'oants'o tse tloaelehileng tsa ts'ebetso ea litšebeletso ke letoto la litaelo tse tsamaisoang ke menu. Latela litaelo tse skrineng ho phethela tšebetso.

Likhetho tse fumanehang tsa tšebeletso le tlhokomelo li kenyelletsa:

• Oli Light Reset
• Tšebeletso ea EPB
• Tlhophiso ea Battery
• Nchafatso ea DPF
• TPS/TBA
• SAS Calibration .CVT
• Gear Leam
• TPMS Relearn Programming Service
• Odometer
• Khoutu ea ente

Ho qala tlhahlobo:

1. Scroll with the arrow keys to highlight Maintenance from the main menu and press the ENTER key. Alist of available services display.
   
   Setšoantšo sa 6-1 Sample Main Menu Screen
2. Khetha tšebeletso eo u ka e lekang ebe o tobetsa ENTER ho qala.
   
   Setšoantšo sa 6-2 Sample Maintenance Screen

Oli Service Reset

Oli Light Reset menu allows you to reset the service lamps sehlopheng sa lisebelisoa. The Service Indicator System e etselitsoe ho lemosa mokhanni ha koloi e lokeloa ho ea tšebeletsong.
Mekhoa ea ho tsosolosa tšebeletso ea oli e khethoa ke koloi e lekoang.

• Oil Reset With One Button applicable to GM models only. It offers quick and simple oil service reset with the click of one button.
• Seta ka letsoho – almost all Asian vehicles and most American and European vehicles have mechanical oil service indicator reset. The service tool does not have to communicate with the vehicle being tested, but guides you to complete the service manually by providing step-by-step on-screen instructions. When Manual Reset is selected and the vehicle being tested identified, a procedure opens on the screen. Scroll with arrow keys to read the entire procedure and performing the necessary steps as directed by the on-screen instructions. The exact order of the test operation steps may vary depending on the test vehicle. Be sure to follow all on-screen instructions. The manual reset procedure can be interrupted and aborted if the ignition key position is changed.
• Khutlisa bocha – Auto Reset is a bi-directional communication procedure directed by the service tool. The service tool displays guides for you through the process. A number of instructions that require a response to continue display, including an option to clear any stored codes once the interval has been reset. Follow the on-screen instructions.

Electronic Parking Brake

Tšebeletso ea EPB menu allows you to perform the service and maintenance of brake systems, including deactivation and activation of the brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on multiple brands of vehicles where electronic brake systems are fitted.

Liteko tse ling li hlahisa taelo ho opareitara. Bakeng sa mohlalaample, haeba “Ho Tobetsa Brake Pedal” ho hlaha, opareitara e lokela ho tobetsa le ho tshwara brake pedal ebe o tswela pele. Liteko tsa 'nete li fapana ho ea ka moetsi oa koloi, selemo, etsa.
Likhetho tse ikhethileng tsa tlhahlobo li kenyelletsa:

• Deactivate/Activate SBC/EPB systems – allows to deactivate brakes for further service or maintenance work on brake systems or activate brakes when service or maintenance work on brake systems are completed.
• Ho ikamahanya le maemo ho Audi A8 - e lumella ho beha botenya bo bocha ba li-brake calipers ka mor'a ho fetola li-brake discs & pads ho mehlala ea Audi A8.
• Kenya sebaka sa hydraulic brake system fluid/bleed brake system likoloing tsa Mercedes SBC -allows to change brake fluid/bleed brake system.
• Perform service reset and service position on BMW EPB vehicles – allows to do the CBS reset and CBS correction for front brake and rear brake.
• Etsa ts'ebetso / ts'ebeletso ho likoloi tsa Volvo PBM -allows to perform installation check, applying parking brake, releasing parking brake, activating service mode and exiting service mode.
• Reset memory on Toyota EPB vehicles – allows to clear the learned memory of the EPB ECU.
• Pheta brake cable replacement le motlakase parking brake replacement -allows to fit in or remove the brake cable safely, adjust brake cable’s tension and calibrate the electric parking brake replacement.
• Boloka le ho ngola mananeo a clutch pedal likoloing tsa Renault EPB – allows to save clutch pedal programming on Renault vehicles fitted with manual gearbox. After this command is activated, the tool allows to “flash” the electric parking brake unit with the saved clutch data.
• Perform control function and reset function on Opel EPB vehicles – allows to apply/release park brake cable service, provide park brake cable service replacement procedures and calibrate the parking brake systems after brake service.
• Sensor calibration ho likoloi tsa Honda EPB - e lumella ho hlophisa boleng ba hona joale ba sensor e 'ngoe le e' ngoe ka har'a yuniti ea brake ea ho paka ea motlakase.
• Provides parking brake unjam procedure and perform longitudinal accelerometer calibration on Land Rover EPB vehicles – allows to drive the electronic park brake so it is unjamed in the releasing direction and then drive it into mount.

• Lisistimi tsa EPB li tlameha ho koaloa pele li etsa mosebetsi ofe kapa ofe oa tlhokomelo/ts'ebeletso holim'a mariki joalo ka ho fetola li-pads, discs le caliper.
• Sebelisa lisebelisoa tse nepahetseng ho qoba kotsi ea likotsi tsa 'mele tsa mak'henike le litsebi le tšenyo ea sistimi ea mariki.
• Etsa bonnete ba hore koloi e koetsoe ka nepo ka mor'a ho koala lisebelisoa.

Phetisetso ea Betri (BRT)

BRT menu lets you to n to validate new battery, clear faults from the dashboard and display current battery details of the vehicle such as Audi, BMW, Citroen, Peugeot, Seat, Skoda, Volvo, VW and Ford.

1. Tlosa betri ea khale ka e ncha. Netefatsa hore senotlolo ha se teng.
2. Hokela sekena ho 16 pin Data Link Connector (DLC) ea koloi ka thapo ea tlhahlobo.
3. Matlafatsa sesebelisoa ebe u khetha BRT; e tla bonts'a lisebelisoa tsohle tsa koloi. Khetha ho etsa koloi ea hau 'me u latele taelo ea sekena ho qala.
   • Sensor calibration ho likoloi tsa Honda EPB allows to program the current output value of each sensor into the electric parking brake unit.
   • Etsa BRT likoloing tsa Citroen/Peugeot make several selections to confirm your car model, and then complete the battery replacement following on-screen instructions.
   • Etsa BRT likoloing tsa Audi/VW/Seat/Skoda after communicating with vehicles, there’s two options under Replace battery menu – Validate battery and Display data.
     • Validate battery menu lets you to recode the new battery to the vehicle’s ECU and to turn off dashboard warning lights. The on-screen instructions would guide you step by step to complete the replacement.
     • Bontša Boitsebiso menu lets you to check the battery information or battery replacement records –
   • Etsa BRT likoloing tsa BMW/Volvo after making several selections to confirm your vehicle model, you can select Display data, Validate Battery or Clear codes from Function menu.

Setlhola sa Disele Particulate (DPF) Tsosoloso

Nchafatso ea DPF menu lets you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter. When a DPF regeneration cycle is completed, the DPF light automatically goes off.

Ho tsamaisana le 'mele oa Throttle (TPS/TBA)

Ho tloaelehile ho bona moreki a kena ka lebenkeleng ka Volkswagen kapa Audi e ke keng ea sebetsa ka nepo. E 'ngoe ea lisosa tse ka khonehang ke hore boemo ba throttle ha bo tsejoe. Ha sebaka sa motsamao se sa tsejoe, ECU ha e tsebe hantle hore na e ka beha throttle hokae. ECU e tlameha ho tseba mefuta eohle ea ho sisinyeha ha throttle e le hore e laole enjene hantle. E sebelisa li-sensor tsa boemo ba throttle 'meleng oa throttle, ECU e ithuta maemo a feletseng a bulehileng le a feletseng a koetsoeng ka linaha tse sa tšoaneng (e sa sebetseng, karolo ea throttle, WOT) e tsejoang e le Throttle Body Alignment (TBA).

Tekanyetso ea Sensor sa Angle (SAS)

SAS Calibration menu let you perform calibration of the Steering Angle Sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM. On successful calibration of the sensor, its fault memory is automatically cleared.

Phetiso e sa fetoheng e sa khaotseng (CVT)

This function is used to reset the compensation code and initialise the ECT after a solenoid valve or valve body assembly has been replaced.

Ho Ithuta Gear

Sensor ea boemo ba crankshaft e ithuta mamello ea machining ea meno ea crankshaft le ho e boloka komporong ho fumana ho fosahetse ha enjine ka nepo. Haeba thuto ea meno e sa etsoe bakeng sa koloi e nang le enjene ea Delphi, MIL e tla buleha ka mor'a hore enjene e qale. Sesebelisoa sa ho hlahloba se lemoha DTC P 1336 'leino le sa ithutoang'. Tabeng ena, o tlameha ho sebelisa sesebelisoa sa ho hlahloba ho etsa thuto ea leino bakeng sa koloi. Kamora hore thuto ea meno e atlehe, MIL ea tima.
Ka mor'a hore enjene ECU, crankshaft position sensor, kapa crankshaft flywheel e nkeloe sebaka, kapa DTC 'tooth not learnt' e teng, thuto ea meno e tlameha ho etsoa.

Tire Pressure Monitoring System Programming

Lenaneo la Ts'ebeletso la TPMS le u lumella ho lekola li-ID tsa sensor ea mabili ho tsoa ho ECU ea koloi le ho etsa lenaneo la TPMS le ho seta bocha kamora hore lithaere le/kapa li-sensor tsa TPM li nkeloe sebaka le/kapa lithaere li fetotsoe.

Odometer

Ts'ebetso ena e u lumella ho nchafatsa letsatsi la odometer le ho ngola letsatsi la pele ho odometer e ncha.

Coding ea Injector

Ngola khoutu ea 'nete ea ente kapa u ngole hape khoutu ho ECU ho khoutu ea ente ea silinda e tsamaisanang e le ho laola ka nepo kapa ho lokisa bongata ba ente ea silinda. Ka mor'a hore ECU kapa injector e nkeloe sebaka, khoutu ea ente ea cylinder e 'ngoe le e' ngoe e tlameha ho netefatsoa kapa e ngotsoe hape e le hore silinda e ka tseba hantle liente ho laola ente ea mafura ka nepo.

Ts'ebetso ea OBDII/EOBD

OBDII/EOBD menu lets you access all OBD service modes. According to ISO 9141-2, ISO 14230-4, and SAE J1850 standards, the OBD application is divided into several sub programs, called ‘Service $xx’.
Below is a list of OBD diagnostic services:

• Service $01 – request current powertrain diagnostic data
• Service $02 – request powertrain freeze frame data
• Service $03 – request emission-related diagnostic trouble codes
• Service $04 – clear/reset emission-related diagnostic information
• Service $05 – request oxygen sensor monitoring test results
• Service $06 – request on-board monitoring test results for specific monitored systems
• Service $07 – request emission-related diagnostic trouble codes detected during current or last completed driving cycle
• Service $08 – request control of on-board system, test or component
• Service $09 – request Vehicle Information
• Service $0A – permanent diagnostic trouble codes(DTCs) (cleared DTCs)

When OBDII/EOBD application is selected from Home screen, the scanner starts to detect the communication protocol automatically. Once the connection has established, a menu that lists all of the tests available on the identified vehicle displays.
Hangata, likhetho li kenyelletsa:

• Boemo ba Tsamaiso
• Bala Melao
• Fetola Lintlha tsa Frame
• Hlakola Likhoutu
• Live Data
• I/M Ho itokisa
• Teko ea Sensor ea O2
• Teko ea Monitor ea Lebotong
• Teko ea Karolo
• Boitsebiso ba Koloi
• Li-module li hlahisa
• Ho Batla Khoutu

HLOKOMELA
Not all function options listed above are applicable to all vehicles. Available options may vary by the year, model, and make of the test vehicle. A “Not supported the mode!” message displays if the options not applicable to the vehicle under test

Tlhophiso ea Sistimi

Karolo ena e bontša mokhoa oa ho hlophisa sehatisi ho fihlela litlhoko tsa hau tse ikhethileng.
Ha Li-setting li khethiloe, ho tla hlaha menu e nang le likhetho tse fumanehang. Hangata, likhetho li kenyelletsa:

• Puo
• Yuniti
• Likhaoletso
• Beep Set
• Tlhahlobo ea Pontšo
• Teko ea Keypad
• About

Kgetha Puo

Ho khetha Puo ho bula skrine e u lumellang ho khetha puo ea sistimi. Sesebediswa sa ho skena se setetswe hore se bontshe dimenu tsa Senyesemane ka boiketsetso.

Ho lokisa puo ea sistimi:

1. Tsamaisetsa ka likonopo tsa metsu ho totobatsa Puo ho tsoa ho li-setting ebe o tobetsa konopo ea ENTER.
   
   Setšoantšo sa 8-1 Sample Settings Screen
2. Tobetsa konopo ea motsu le letšehali khetha puo ebe o tobetsa ENTER ho netefatsa. Tobetsa konopo ea Morao ho tsoa le ho khutla.
   
   Setšoantšo sa 8-2 Sample Skrine sa Khetho ea Lipuo

Fetola Liyuniti

Ho khetha Yuniti ho bula lebokose la puisano le u lumellang ho khetha li-unit tsa tekanyo.
Ho fetola sethala sa yuniti:

1. Scroll with the arrow keys to highlight Units from Settings menu and press the ENTER key
   
   Setšoantšo sa 8-3 Sample Settings Screen
2. Tobetsa konopo ea motsu oa holimo le tlase khetha ntho ebe o tobetsa ENTER ho boloka le ho khutlisa.
   
   Setšoantšo sa 8-4 Sample Screen Selection ea Unit

Configure Shortcut Keys

Ho khetha khetho ea Shortcuts ho u lumella ho fetola ts'ebetso ea likonopo tse khaoletsang.
Ho abela tšebetso ho konopo ea shortcut:

1. Tsamaisetsa ka likonopo tsa metsu ho totobatsa Likhaoletso ho tsoa ho Li-setting ebe o tobetsa konopo ea ENTER. Skrine se nang le likonopo tse khaoletsang tse fumanehang.
   
   Setšoantšo sa 8-5 Sample Settings skrineng
2. Tobetsa konopo ea motsu oa holimo le tlase khetha konopo ea ho khaoletsa ebe o tobetsa konopo ea ENTER. Skrine se nang le lenane la lisebelisoa tse kentsoeng.
   
   Setšoantšo sa 8-6 Sample Shortcuts Screen
3. Scroll with the aow keys to highlight an application and press the ENTER key to assign the application to the shortcut key
   
   Setšoantšo sa 8-7 Sample Shortcuts Screen

Tlhahlobo ea Pontšo

Ho khetha Tlhahlobo ea Pontšo option opens a screen that allows you to check the functionality of the display.

Totest the display

1. Tsamaisetsa ka likonopo tsa metsu ho totobatsa Tlhahlobo ea Pontšo ho tsoa ho li-setting ebe o tobetsa konopo ea ENTER ho qala tlhahlobo. Sheba hore na ho na le matheba a sieo skrineng sa LCD.
   
   Setšoantšo sa 8-8 Sample LCD Test Screen
2. Ho tlohela tlhahlobo, tobetsa konopo ea Back.

Teko ea Keypad

Ho khetha Teko ea Keypad option opens a screen that allows you to check the functionality of the keypad

To test the keypad

1. Tsamaisetsa ka likonopo tsa metsu ho totobatsa Teko ea Letlapa la Likonopo ho tsoa ho Litlhophiso ebe o tobetsa konopo ea ENTER.
   
   Setšoantšo sa 8-9 Sample Settings Screen
2. Press any key to start test. The virtue key co responding with the key you pressed will be highlighted on the screen f it works correctly.
   
   Setšoantšo sa 8-10 Sample Keypad Test Screen
3. To quit the test, press Back key twice

Boitsebiso ba Sesebelisoa

Ho khetha About option opens a screen that shows information about your scan tool, such as serial number, which may be required for product registration

Ho view information of your scan tool

1. Tsamaisetsa ka likonopo tsa metsu ho totobatsa About ho tsoa ho li-setting ebe o tobetsa konopo ea ENTER.
   
   Setšoantšo sa 8-11 Sample Settings Screen
2. Skrine se nang le lintlha tse felletseng tsa skrineng sa scanner.
   
   Setšoantšo sa 8-12 Sample Tool Information Screen
3. Tobetsa konopo ea Morao ho tsoa.

Nchafatso

Ho nchafatsa scanner, o hloka lisebelisoa tse latelang:

• Sesebelisoa sa scan
• Tšebeletso ea WIFI e fumaneha
• phepelo ea motlakase e nang le likou tsa USB kapa thapo ea tlhahlobo

HLOKOMELA
Before updating, please make sure your network works correctly. Before updating, please make sure you have already created a Foxwell ID. Before updating, please make sure your scanner is tumed on.

1. Kenya Update ebe u khetha WIFI e fumanehang ho hokela.
   
   Setšoantšo sa 9-1 Sample WIF| Screen
   
   Setšoantšo sa 9-2 Sample WIFI Selection Screen
2. Ho Apdeita, tobetsa lebokose (li) hlahloba ka pel'a software eo u lakatsang ho e nchafatsa ebe u tobetsa konopo ea Update Select hore u e khoasolle.
   
   Setšoantšo sa 9-3 Sample Upgrade Check Screen
3. Ha lintho tsohle li nchafalitsoe, "Lits'oants'o tsohle tsa software li kentsoe ka katleho!" lipontšo tsa melaetsa.
   
   Setšoantšo sa 9-4 Sample Ntlafatsa Screen e Phethiloeng

Tlosa

Khetho ena e u lumella ho hlakola software ea koloi e kentsoeng seskeneng.

Ho ntša software ea koloi:

1. Kenya Litlhophiso skrineng sa lapeng.
   
   Setšoantšo sa 10-1 Sample Uninstall Venicle Software Screen
2. Khetha khetho ea Uninstall Vehicle Software lethathamong la khetho.
3. Choose the vehicle software you want to delete or choose Select All to Uninstall
   
   Setšoantšo sa 10-2 Sample Uninstall Venicle Software Screen

Ngodisa

The scanner can be updated to keep you stay current with the latest development of diagnosis. This section illustrates how to register and update your scan tool

Etsa ID ea Foxwell

Ngolisa Ka Websebaka
If you are new to FOX WELL, please register on www.letlamatco.vn and create a FOX WELL ID first. If you have installed the update application Fox Assist, please refer to the registration guide on 9.1.2 ]

1. Ho ngolisa ka websebaka:
   Ho theha ID ea Foxwell le ho ngolisa sesebelisoa sa hau sa scan
   • a. Visit our site www.letlamatco.vn ebe u khetha Support> Ngolisa.
     
     Setšoantšo sa 11-1 Sample Register Screen
   • b. Tobetsa Sehokelo sa Register ka holimo ka ho le letona ho website o at the lower side of home page:
     
     Setšoantšo sa 112 Sample Register Screen
2. Enter your own email address and click “Send code” to find the verification code in your mailbox Create a unique password, confirm password and then click “Free registration” to complete. When your ID has been created, you are allowed to view mananeo ohle a amanang le sesebelisoa sa hau, jarolla lintlafatso, hlophisa pro ea haufile, submit feedback and join our community to share your ideas and your stories about our products. Note: Please always remember your FOX WELL ID and Password, as it’s important for your to manage your product and updates.
   
   Setšoantšo sa 11-3 Sample Skrine sa ho Tlatsa Foromo ea Ngoliso
   BOHLOKOA
   User name is limited to Email address and please always find the Verification Code in your registered email
3. Molaetsa oa katleho oa Ngoliso o tla hlaha haeba u ingolisa ka katleho.
   BOHLOKOA
   Ka kopo, hopola kamehla ID ea hau ea FOXWELL le Password kaha ho bohlokoa ho uena ho laola sehlahisoa sa hau le liapdeite.
4. The registration page will be bypassed, skipping to the log in page. Just input your FOXWELL D and Password to sign in
   
   Setšoantšo sa 114 Sample Sign in Screen
5. Ha u kena ka katleho, Setsi sa Litho se tla bontša ka tlase. Sethala sena se u nolofalletsa ho boelaview lihlahisoa tse ngolisitsoeng, ngolisa lihlahisoa tse ncha, fetola tlhahisoleseding ea botho kapa reta phasewete.
   
   Setšoantšo sa 11-5 Sample Setho sa Setsi sa Setho
6. Haeba u lebala phasewete ea hau, tobetsa feela Kena ka holimo letsohong le letona la website, then click Forget password, You are rewired to input your registered email address, verification code, new password and confirmed password, click Reset password
   
   Setšoantšo sa 11-6 Sample ID ea mosebelisi le/kapa Sekrine sa ho Fumana Password
   BOHLOKOA
   Before enter new password or confirm password, please enter the correct Verification Code in your registered email
7. Molaetsa o atlehileng oa ho seta phasewete o tla hlaha haeba o phomotse phasewete ka katleho. Hona joale o khona ho kena ka ID ea hau le password e ncha. Haeba u batla ho fetola phasewete, ka kopo, kena ka lebitso la hau le password, ebe u khetha My Profile/Reset Password
   
   Setšoantšo sa 11-7 Sample Password Reset Skrine e atlehileng
8. Haeba u lebala lengolo-tsoibila la hau kapa ID ea Foxwell, tobetsa feela Kena ka holimo letsohong le letona la websaeteng, ebe o tobetsa Forgot password, ebe o tobetsa Forget Email or Foxwell ID. U tlameha ho kenya nomoro ea hau ea serial e ngolisitsoeng.
   
   Setšoantšo sa 11-8 Sample Nomoro ea Sehlahisoa e Hlokehang Screen
9. Imeile ea hau e Ngolisitsoeng kapa ID ea Foxwell e tla hlaha tlasa SEARCH RESULT.
   
   Setšoantšo sa 11-9 Sample Skrine sa Sephetho sa Patlo sa FOXWELL

Ngolisa ka ho Skena Khoutu ea QR

U boetse u lumelloa ho ngolisa le ho theha ID ea Foxwell ka ho hlahloba khoutu ea QR.

Ho ingolisa ka ho skena khoutu ea QR:

1. Kenya Ntlafatso 'me u hokele WIFI, ebe u skena khoutu ea QR ho ingolisa.
   
   Setšoantšo sa 11-10 Sample Fox Assist Installation Screen
2. Scan the QR code and enter Register webleqephe. Kenya aterese ea hau ea lengolo-tsoibila ebe u tobetsa "Send code" ho fumana khoutu ea netefatso ka lebokoseng la hau la poso . Theha phasewete e ikhethang, netefatsa phasewete ebe o tobetsa "Ngoliso ea mahala" ho phethela.
   
   Setšoantšo sa 11-11 Sample Register Screen

Ngolisa Sekena sa hau

Register Product Through Websebaka

1. Bula www.letlamatco.vn leqephe le ka sehloohong khomphuteng kapa scan khoutu ea QR. ebe o tobetsa Kena. Kenya ID ea hau ea FOXWELL/imeile le phasewete tse ngolisitsoeng.
   
   Setšoantšo sa 11-12 Sample Sign in Screen
2. Ha u kena ka katleho, Setsi sa Litho se tla bontša ka tlase. Sethala sena se u nolofalletsa ho boelaview the registered products, register new products, modify personal information or reset the password
   
   Setšoantšo sa 11-13 Sample Setho sa Setsi sa Setho
3. Ho ngodisa sehlahisoa, ka kopo tobetsa Lihlahisoa tsa ka> Ngoliso e Ncha. Kenya nomoro ea serial e nepahetseng ebe u tobetsa konopo ea Romela ho qetela ngoliso ea sehlahisoa. Ka kopo, pheta mokhoa ona haeba u na le lihlahisoa tse ngata.
   
   Setšoantšo sa 11-14 Sample Skrine se Secha sa Ngoliso ea Sehlahisoa
   HLOKOMELA
   To check the serial number of a device, please boot it up, and select Setting>About. The serial number is right on the About page. You can also find the serial number on the back of main unit or Warranty Card.

Ngolisa Sehlahisoa ka ho Skena Khoutu ea QR

Ho ngolisa sehlahisoa ka ho hlahloba khoutu ea QR:

1. Enter Update and connect WIFI, then scan the QR code to register to sign in and finish Product Registration
   
   Setšoantšo sa 11-15 Sample Foxwell ID Sign in Screen
2. When log in successfully, input correct serial number and click the Submit button to complete product registration
   
   Setšoantšo sa 11-16 Sample Sehlahisoa sa Ngoliso ea Sehlahisoa

Tlhokomeliso ea FCC:
Thepa ena e lekoa 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:

• Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
• Eketsa karohano pakeng tsa thepa le moamoheli.
• Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
• Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Tlhokomeliso: Liphetoho leha e le life kapa litokiso ho sesebelisoa sena tse sa amoheloang ka ho hlaka ke moetsi li ka senya matla a hau a ho sebelisa sesebelisoa sena.

Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC.
Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
(1) Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi, le (2) sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a FCC e behiloeng bakeng sa tikoloho e sa laoleheng. Thepa ena e lokela ho kengoa le ho sebetsoa bonyane sebaka sa Ocm lipakeng tsa radiator le 'mele oa hau.

Litokomane / Lisebelisoa

Foxwell NT680PLUS Sistimi Tsohle mme Tsohle li etsa Scanner [pdf] Bukana ea Mosebelisi 2ASC2-NT680PLUS, 2ASC2NT680PLUS, nt680plus, NT680PLUS All System and All make Scanner, NT680PLUS, All System and All make Scanner, System and All make Scanner, All etsa Scanner, etsa Scanner.

Litšupiso

• Bukana ea Mosebelisi