FOS theknoloji SuperStorm LED Strobe

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

• Lebitso la Sehlahiswa: FOS SuperStorm
• Likhetho tsa ho Kenya: Ground, Hanging, Splicing, Diffuser
• Khokahano ea Letšoao: EA-512-DMX
• Boholo ba Palo ea Litokiso: 32
• Phepelo ea motlakase: Khokahano e arohaneng bakeng sa litaelo tsa tšebeliso ea sehlahisoa ka seng

Ho kenya
Ho kenya FOS SuperStorm, latela e 'ngoe ea mekhoa e ka tlase

1. Kemiso ea Motheo: Beha sesebelisoa fatše sebakeng seo u se batlang.
2. Ho kenya Hanging: Fokotsa sesebelisoa ho sebelisa lisebelisoa tse loketseng le mehato ea polokeho.
3. Ho kenya Splicing: Kopanya lisebelisoa tse ngata hammoho ho theha mabone a malelele.
4. Ho kenya Diffuser: Hokela sesebediswa sa diffuser ho sesebelisoa bakeng sa litlamorao tse lakatsehang tsa mabone.

Khokahano ea Letšoao le Matla
Ho hokela lisebelisoa tse ngata le phepelo ea motlakase, latela mehato ena

1. U sebelisa thapo ea lets'oao la 3-pin, hokela boema-kepe ba DMX ba molaoli ho mohala oa ho kenya oa DMX oa 1st fixture.
2. Hokela mohala oa tlhahiso ea DMX oa sesebelisoa sa pele ho mohala oa ho kenya oa DMX oa sesebelisoa sa bobeli, 'me u tsoele pele khokahano ena ho fihlela lisebelisoa tsohle li hokahane.
3. Haeba u sebelisa taolo ea master-slave synchronous, beha sebopeho sa pele e le mong'a lethathamo le tse setseng e le makhoba (setting ea kamehla ke lekhoba).
4. Netefatsa hore sesebelisoa se seng le se seng se na le khokahano e arohaneng ea phepelo ea motlakase.
5. Etsa bonnete ba hore motlakase o na le voltage le maqhubu a lumellana le litlhaloso tse thathamisitsoeng bukeng ea lihlahisoa.

Ts'ebetso:
Ho sebelisa FOS SuperStorm, latela mehato ena

1. Ho bula, kenya phasewete ea ho bulela: PHAHAMA – PASI – HODIMO – TLASE.
2. Tobetsa konopo ea UP kapa DOWN ho bala likhetho tse fapaneng tsa ho seta.
3. Tobetsa konopo ea ENTER ho boloka litlhophiso kapa ho kenya lenane le latelang.
4. Tobetsa konopo ea UP kapa DOWN ho fetola likhetho.
5. Tobetsa konopo ea MENU ho khutlela ho menu e ka holimo.

Tlhophiso ea Aterese ea DMX:
Ha o sebelisa molaoli ho laola lisebelisoa tse ngata, sesebelisoa ka seng se lokela ho fuoa aterese e ikhethang ea DMX. Ho na le mefuta e 3 ea taolo e fumanehang:

• Mokhoa o bonolo
• Mokhoa o tloaelehileng
• Mokhoa oa ho Atolosoa

LBH:

1. P: Ke lokela ho etsa eng haeba ho e-na le tšenyo leha e le efe e bakoang ke lipalangoang?
   A: Ka mor'a ho amohela mabone, bula 'me u hlahlobe tšenyo. Haeba ho na le tšenyo e bakiloeng ke lipalangoang, u se ke ua sebelisa sesebelisoa 'me u ikopanye le morekisi kapa moetsi oa hau hang-hang.
2. P: A na nka sebelisa clamps e le mokhoa oa ho tsamaisa lisebelisoa?
   A: Che, ho thibetsoe ka thata ho sebelisa clamps joalo ka mofeng oa ho jara lisebelisoa. Sebelisa mehele kapa mekhoa e loketseng ea ho jara.
3. P: Na ho na le lisebelisoa tse leketlileng ka lehlakore?
   K: Tjhe, metjhini e leketlileng ka mathoko e thibetswe ka mabaka a polokeho.
4. P: Ke palo e phahameng ka ho fetesisa ea lisebelisoa tse ka hokahanngoang?
   A: Palo e kholo ea lisebelisoa tse ka hokahantsoeng ke 32.
5. P: Ke beha aterese ea DMX joang bakeng sa papali ka 'ngoe?
   A: Sebelisa molaoli ho abela aterese e ikhethang ea DMX ho sesebelisoa se seng le se seng bakeng sa ho amohela le ho arabela ka nepo.

Tlhahisoleseding e lemosang ka polokeho

Kamora ho amohela mabone, ka kopo bula ho bona hore na ho na le tšenyo e bakiloeng ke lipalangoang. Haeba ho na le tšenyo e bakiloeng ke lipalangoang, ka kopo se ke oa ikopanya le sesebelisoa sena 'me u ikopanye le morekisi kapa moetsi oa hau kapele kamoo ho ka khonehang.

• Projector ke ea ts'ebeliso ea kahare le kantle, IP65.
• Se ke oa kenya lisebelisoa holim'a libaka tse tukang ka ho toba.
• Sesebelisoa sena se reretsoe feela ho kenya, ho sebetsa le ho hlokomeloa ke basebetsi ba tšoanelehang. Se ke oa beha sebanka holim'a libaka tse tukang, sebaka se tlase ke 3 metres.
• Qoba ho pepesehela ka ho toba lebone le tsoang ho lamp. Leseli le kotsi mahlong.
• Se ke oa leka ho qhaqha le/kapa ho fetola projeke ka tsela efe kapa efe.
• Khokelo ea motlakase e tlameha ho etsoa feela ke basebetsi ba tšoanelehang.
• Pele o kenya, etsa bonnete ba hore voltage le maqhubu a phepelo ea motlakase a tsamaisana le litlhoko tsa motlakase tsa sesebelisoa.
• Ho bohlokoa hore projeke e 'ngoe le e' ngoe e behiloe ka nepo le hore ho kenya motlakase ho tsamaellane le litekanyetso tsohle tse amehang.
• Se ke oa hokela sesebelisoa sena le mefuta e meng ea lisebelisoa tsa dimmer.
• Projector e lokela ho lula e kentsoe ka mokhoa oa bobeli oa tšireletso. Mohala oa tšireletso o fanoa bakeng sa sena; e lokela ho hokelloa joalokaha ho bontšitsoe karolong ea "ho kenya projector".
• Lithebe le lense li tla fetoloa haeba li senyehile ka mokhoa o hlakileng ho feta oa tsona
  ho sebetsa hantle hoa senyeha, mohlalaample ka mapheo kapa mengoako e tebileng.
• Lithempereichara tsa bokantle ba lebone ka mor'a metsotso e 5 ts'ebetso ke 45 ℃, ha boemo bo tsitsitseng bo fihlella 70 ℃. Ha ho na likarolo tse ka sebelisoang ka har'a projeke, u se ke oa bula matlo 'me le ka mohla u se ke ua sebelisa mochini o nang le likoahelo tse tlositsoeng.
• Ha ho na likarolo tse sebetsang ka har'a lebone lena, ka kopo sheba hore na likoahelo tsohle kapa likhetla li kentsoe le likurufu li tiisitsoe ka mokhoa o sireletsehileng. Ho thibetsoe ho sebelisa mabone a nang le likoahelo (kapa shell) a bulehileng.
  Haeba u na le lipotso, u seke oa tsilatsila ho ikopanya le morekisi kapa moetsi oa hau.

Ka linako tsohle ho khaoha ho Motlakase pele ho kenya, ho hloekisa le ho lokisa sesebelisoa

Ho kenya

1. E hlomamisoa fatše
2. Ho fanyeha
3. Ho kopanya
4. Sehlahisoa

Ntša 2 clamps le thapo ea tšireletso ea 1, kenya 2 clamps botlaaseng ba sebopeho se nang le kotola e 4 e potlakileng e hokeletsoeng ho clamps , ebe u fanyeha sebopeho holim'a ts'ehetso e tsitsitseng ka clamp, 'me u tiise klamp notlela bolt ho lokisa sebopeho. Ka kopo netefatsa hore mochini o tsitsitseng o tsitsitse ebile oa tšepahala, 'me u netefatse hore sebaka sa ho phahamisa se na le matla a lekaneng ho mamella boima ba sebopeho. Ka kopo, tšoara thapo ea tšireletso e kentsoeng ka mokhoa o sa reroang ka tlas'a sets'oants'o sa mochini bakeng sa ho phahamisa thuso ho netefatsa polokeho.
Hlokomela:

1. Sehlopha sa clamps li sebelisoa feela ha u kenya lisebelisoa. Ho thibetsoe ka thata ho sebelisa clamps joalo ka mofeng oa ho jara lisebelisoa.
2. Bakeng sa mabaka a ts'ireletso, ka kopo sebelisa thapo ea tšireletso e ka mamellang boima ba makhetlo a 10 ho feta ka lesoba la polokeho la 'mele oa mochini.
3. Lisebelisoa tsa mahlakoreng li thibetsoe.

Letšoao le khokahano ea matla

• Bakeng sa ho hokahanya mats'oao a taolo, likhoele tse sirelelitsoeng tse 2-pin tse nang le bophara bo seng ka tlase ho 0.5 mm li tlameha ho sebelisoa lipakeng tsa sesebelisoa le molaoli le lipakeng tsa lisebelisoa.
• Ka kopo sebelisa 3-pin signal output /mola o kenang oa lamp ho hokela. Likamano pakeng tsa li-ports tsa 3-pin li bontšitsoe setšoantšong se ka holimo. Hoa lokela ho hlokomeloa hore phini ea 3 ea plug / socket ea XLR ha ea lokela ho kopana le khetla e ka hare kapa pakeng tsa li-cores ha e kopanya. XLR plug / socket le thapo ea taolo ea XLR li ke ke tsa hokeloa ka tsela efe kapa efe ntle le khokahano e bontšitsoeng setšoantšong se kaholimo. Sehlahisoa sena se fumana lets'oao la taolo la machaba la DMX512 (1990).
• Khokahano ea lets'oao la li-fixtures tse ngata, palo e phahameng ea khokahano ke lisebelisoa tse 32, sebelisa thapo ea lets'oao la 3-pin ho tloha boema-kepeng ba DMX ba molaoli ho ea moleng oa ho kenya oa DMX oa 1st fixture, 'me u hokahane ho tsoa moleng oa tlhahiso ea DMX ea sebopeho sa pele Ho ea moleng oa ho kenya oa DMX oa sebopeho sa bobeli, joalo-joalo, ho fihlela lisebelisoa tsohle li hokahane.
• Ha sesebelisoa sa pele se sa hokahane le molaoli (khokahanyo ea mohala oa lets'oao lipakeng tsa lisebelisoa tse ling e lula e sa fetohe), ke mokhoa oa khokahano oa taolo ea master-slave synchronous. Leha ho le joalo, ho fihlela taolo ea khokahano ea makhoba a master, sesebelisoa sa pele se lokela ho hlophisoa e le monghali ho menu, 'me lisebelisoa tse setseng li lokela ho hlophisoa e le makhoba (tekanyo ea kamehla ke lekhoba).
• Ha o hokahanya phepelo ea motlakase, phepelo ea motlakase ea sesebelisoa se seng le se seng e lokela ho hokahanngoa ka thoko. Ka kopo hlokomela hore phepelo ea motlakase voltage le maqhubu a tlameha ho lumellana le matla a phepelo ea motlakasetage le makhetlo a thathamisitsoeng bukeng ea lihlahisoa.

Mosebetsi le ho kenya

• Tobetsa konopo   haeba u batla ho sheba ka har'a Likhetho tse fapaneng tsa ho Seta.
• Tobetsa konopo ho boloka li-setting tsa hau kapa ho kenya menu e latelang.
• Tobetsa konopo ho sutha.
• Tobetsa konopo e tla khutlela ho menu e ka holimo ka bonngoe.

Boemo ba aterese ea DMX

• Ha u sebelisa molaoli ho laola lisebelisoa tse ngata mochine o mong le o mong o tla fanoa ka aterese ea DMX ho amohela matšoao a tsoang ho molaoli le ho arabela ka nepo, Ho na le mekhoa ea 3 ea ho laola sehlahisoa sena, e leng mokhoa o bonolo, mokhoa o tloaelehileng le mokhoa oa tekanyo.
• Bakeng sa exampLe: Sesebelisoa se na le liteishene tse 20 ka mokhoa o tloaelehileng.

Re theha sethala sa 1 : Aterese ea DMX 001, ebe aterese ea bobeli ea DMX 2, aterese ea 021 ea DMX 3, ea 041th fixture 4 joalo-joalo.

• Bulela sesebelisoa, Haeba menyu ea ts'ebetso e notletsoe, tobetsa  bakeng sa 5 Sec, sesebelisoa se tla notleloa;
• Ebe o tobetsa     or  fumana Add menu;
• Tobetsa    bonts'a Aterese ea DMX;
• Tobetsa  beha boleng ba Aterese ea DMX
• Tobetsa  ho netefatsa hore sesebelisoa se bolokile aterese ena ea DMX ka bo eona
• Tobetsa Menu e tla khutlela ho menu e ka holimo

Lenaneo la ts'ebetso

password ea matla ,

Ea pele LEBAKA	Ea bobeli LEBAKA	Ea boraro LEBAKA	Ea bo1 LEBAKA
Aterese ea DMX	XXX 1~499)	kena
Mokhoa oa mocha oa DMX	13 CH (DMX)	kena
	64 CH (DMX)	kena
	89CH (DMX)	kena
Seemahale sa offline	Tšoara	kena
	Bukana	kena
	Auto	kena
	TLOA	kena
	On	kena
Mobala oa Buka	Dimmer	0-255
	Strobe	0-255
	Macro 1	0-255
	Macro S1	0-255
	Macro 2	0-255
	Macro S2	0-255
	Mmala oa Macro	0-255
	Char1	0-255
	Khaolo ea 2	0-255
	Khaolo ea 3	0-255
	Khaolo ea 4	0-255
	Khaolo ea 5	0-255
	Mobala oa Char	0-255
	BackColor Red	0-255
	BackColor Green	0-255
	BackColor Blue	0-255
	Bosoeu 1	0-255
	Bosoeu 2	0-255

	Bosoeu 3	0-255
	Bosoeu 4	0-255
	Bosoeu 5	0-255
	Bosoeu 6	0-255
	Bosoeu 7	0-255
	Bosoeu 8	0-255
Auto Prgram	Hlahisa RGB	0-255
	Lebelo la RGB	0-255
	Bontša W	0-255
	Lebelo la W	0-255
	Mobala oa Char	0-255
	Char1	0-255
	Khaolo ea 2	0-255
	Khaolo ea 3	0-255
	Khaolo ea 4	0-255
	Khaolo ea 5	0-255
Pontšo	Ch / En	中文
		Senyesemane
	Hlahisa ka ho Otloloha	Tloaelehileng
		furalla
	Backlight	ON
		30s
Paramethara	NO
	ho joalo
Ea kamehla	Che
	Ee
Info	RDM UID
	Channel
	Ver
	Nako
	Mocheso

Lenane la liteishene tsa DMX

Channel

Channel	Lebitso	Setšoantšo sa DMX	Liphesente tsa DMXtage	Tlhaloso
1	Dimmer	0-255	0-100%	0-100%Bothata
2	Strobe	0-255	0-100%	0-100% Strobr makhetlo a mangata
3	Macro 1	0-10	0-100%	fosahetse
		11-20	0-100%	Fx1
		…..
		245-255		Fx25
4	Macro 1S	0-255
5	Macro 2	0-10	0-100%	fosahetse
		11-20	0-100%	Fx1
		…..
		245-255		Fx25
6	Macro 2S	0-255	0-100%
7	Macro 2CF	0-255	0-100%
8	Macro 2CB	0-255	0-100%
9	WS	0-255	0-100%
10	Red-C	0-255	0-100%	0-100% e khubelu
11	Green-C	0-255	0-100%	0-100% e tala
12	Blue-c	0-255	0-100%	0-100% Blue
13	WC	0-255	0-100%	0-100% Bosoeu

64 Channel

Channel	Lebitso	Setšoantšo sa DMX	Liphesente tsa DMXtage	Tlhaloso
1	pixel module 1 R	0-255	0-100%	0-100% e khubelu
2	pixel module 1 G	0-255	0-100%	0-100% e tala
3	pixel module 1 B	0-255	0-100%	0-100% Blue
3	pixel module 1 W	0-255	0-100%	0-100% W
….	……	0-255	0-100%	…….
61	pixel module 16 R	0-255	0-100%	0-100% e khubelu
62	pixel module 16 G	0-255	0-100%	0-100% e tala

63	pixel module 16 B	0-255	0-100%	0-100% Blue
64	pixel module 16 W	0-255	0-100%	0-100% W

89 Channel

Channel	Lebitso	Setšoantšo sa DMX	Liphesente tsa DMXtage	Tlhaloso
1	Dimmer-W	0-255	0-100%	0-100%Bothata
2	Dimmer-RGBW	0-255	0-100%	0-100% Strobr makhetlo a mangata
3	Strobe	0-255
4	Macro 1	0-10	0-100%	fosahetse
		11-20	0-100%	Fx1
		…..
		245-255		Fx25
5	Macro 1S	0-255
6	Macro 2	0-10	0-100%	fosahetse
		11-20	0-100%	Fx1
		…..
		245-255		Fx25
7	Macro 2S	0-255	0-100%
8	Macro 2CF	0-255	0-100%
9	Macro 2CB	0-255	0-100%	0-100% W
10	Bosoeu 1
…	…..	0-255	0-100%
25	Bosoeu 16	0-255	0-100%	0-100% W
26	pixel module 1 R	0-255	0-100%	0-100% e khubelu
28	pixel module 1 G	0-255	0-100%	0-100% e tala
29	pixel module 1 B	0-255	0-100%	0-100% Blue
30	pixel module 1 W	0-255	0-100%	0-100% W
….	……	0-255	0-100%	…….
86	pixel module 16 R	0-255	0-100%	0-100% e khubelu
87	pixel module 16 G	0-255	0-100%	0-100% e tala
88	pixel module 16 B	0-255	0-100%	0-100% Blue
89	pixel module 16 W	0-255	0-100%	0-100% W

Taba ea mantlha ea kanale: dimming> mohala oa lenaneo o hahelletsoeng > mohala oa lenaneo la mosebelisi> ARGBW dimming > HSV dimming> Taelo ea Macro> Mocheso oa Mobala

Tlhokomelo

• Ho etsa bonnete ba hore projeke e tla tšepahala, e lokela ho bolokoa e hloekile. Ho khothalletsoa hore li-fan li hloekisoe matsatsi a mang le a mang a 15. Lisefa tsa lense le mebala ea dichroic le tsona li lokela ho hloekisoa khafetsa ho boloka khanya e ntle haholo. SE KE UA sebelisa mofuta ofe kapa ofe oa solvent ho li-filters tsa mebala ea dichroic.
• Ho hloekisa khafetsa ho ipapisitse le tikoloho eo sesebelisoa se sebetsang ho eona: damp, mosi kapa tikoloho e litšila haholo e ka baka pokello e kholo ea litšila lisebelisoa tsa optic tsa yuniti. Lesela le bonolo le lihlahisoa tse tloaelehileng tsa ho hloekisa likhalase li lokela ho sebelisoa ho hloekisa. Ho khothalletsoa ho hloekisa li-optics tsa kantle bonyane hanngoe ka matsatsi a 20 le ho hloekisa li-optics tsa kahare bonyane hang ka matsatsi a 30/60.
• Se ke oa sebelisa solvent leha e le efe ea tlhaho, mohlala, joala, ho hloekisa seipone se bonahatsang, li-filters tsa mebala ea dichroic kapa matlo a lisebelisoa.

Ho batle phoso

Mathata	Ketso
Sesebelisoa ha se sebetse hantle	Khokahano ea thapo ea motlakase ha e ea tloaeleha, phepelo ea motlakase e senyehileng e senyehile kapa khokahano ha ea tloaeleha, ho hlokahala setsebi sa setsebi se tšoanelehang ho lokisa le ho lokisa. Khokahano ea boto ea taolo ha se ntho e tloaelehileng, setsebi se tšoanelehang se hlokahalang ho etsa tlhokomelo le ho lokisa
Sesebelisoa se sebetsa, empa LED ha e khanye ebile ha e laoloe	Khokahano ea boto ea LED ha e ea tloaeleha, ho hlokahala setsebi sa litsebi se tšoanelehang ho lokisa le ho lokisa
Bulela 'me u bonese ka tloaelo, empa ha e laoloe ke molaoli	sheba hore na DMX ho qala khoutu ea aterese e nepahetse kapa che Sheba hore mohala oa lets'oao la XLR o senyehile kapa che
Sebopeho se lefifi 'me khanya e theoha haholo	Thempereichara ea lisebelisoa e holimo haholo, ka kopo nka mehato e hlokahalang ea ho kenya moea le ho felisa mocheso

Lintlha tsa tekheniki

• Keletso voltage:
  • AC 100V/120V/200V/220V /230V/240V 50/60Hz
• Matla :
  • 700W @ 220V
• Mohloli oa leseli la LED:
• Li-LED tsa Strobe Tube
  • Mofuta oa LED: 3535 5W 6500K LEDs
    Palo ea LED: 144
    LED Mebala: Bosoeu-Bosoeu
    Likarolo tsa LED: 16
• Li-LED tsa Panel tsa Strobe
• Mofuta oa LED: 5050SMD 2W RGBW 4 in1 Palo ea LED: 242
  Mebala ea LED: Bosoeu-Bosoeu
  Likarolo tsa LED: 32 (2×16)
• Ho sebetsa bophelo bohle
  • 50000h
• Dimmer :
  • 0-100% ho fifala ha mola
• Strobe :
  • Motlakase strobe, 0.3-20pcs/sec Max 20 Hz
• Mokhoa oa ho laola:
  • Maemo a machaba a DMX 512signal，3 Pin (5 Pin) DMX512 interface RDM Wireless :2.4 GHz W-DMX™ (boikhethelo)
  • 3 mekhoa ea kanale
  • Mohlanka ea hloahloa
  • Mokhoa o ikemetseng
  • Mokhoa oa ho itlhahloba
• Mesebetsi e meng:
  • Lebelo le ka feto-fetohang le otlolohileng le le otlolohileng
  • Sebopeho sa pontšo se sebelisa nako
  • Hlahisa nomoro ea mofuta oa software
  • Sebopeho sa modular bakeng sa tlhokomelo e bonolo
  • Radiator e laolang lebelo
• Sehokedi
  • Matla : Sermonic PowerOn Ture1 DMX: Sermonic XLR Cable Connector
• Shell le boemo ba tšireletso:
  • Aluminium alloy ea matla a phahameng, khetla e ntšo ea IP66 (khetho e tšoeu)
• Mocheso o sebetsang:
  • -20°C–40°C
• Boima ba 'mele:
  • 8.9 Kg
• Boholo ba tlhahiso:
  • Sheba ka tlase

Litokomane / Lisebelisoa

FOS theknoloji SuperStorm LED Strobe [pdf] Bukana ea Mosebelisi SuperStorm LED Strobe, LED Strobe, Strobe

Litšupiso

• Bukana ea Mosebelisi