Litaelo
MOKHOA OA Mananeo
DASII-2021
Lenaneo la DASII-2021
FT-DASII (Digital Adjustable Sensor gen II)
DAS II e na le accelerometer e hahelletsoeng ka hare e hlokomelang motsamao oa tšohanyetso ho ea pele kapa morao nakong ea ts'ebetso ea ho qala e hole ha ho qala koloi ea phetisetso ea letsoho. DAS II ACCCELERAMETOR HA E SEBELE KA MOKHOA OA HO SEBELISA HO TŠOARA. DAS II e boetse e kenyelletsa likarolo tse pelitagsensor ea e impact, le auto adjusting tilt sensor, le sensor ea ho robeha ha khalase kaofela ka bonngoe. Latela mehato e ka tlase ho hlophisa hantle maemo a hau a sensor ea DAS II. U ka khona view lenaneo la rona / video ea lipontšo e fumanehang laebraring ea rona ea livideo ho www.install.myfirstech.com.
Lintlha tsa Pele ho Kemiso:
- Etsa bonnete ba hore o kenya sensor pele o etsa liteko, re khothaletsa sebaka se tiileng - semi-solid se bohareng ba koloi bakeng sa liphetho tse ntle.
- Kamehla leka sensor e 'ngoe le e' ngoe ka botlalo pele u tsamaisa koloi.
- Bakeng sa tlhahlobo e nepahetseng haholoanyane etsa bonnete ba hore lifensetere tsohle le mamati a koetsoe pele o qala tlhahlobo
DAS-II Programming Procedure (NON DC3 CM)
MOHATO 1: Fetolela ho khantša ho ea sebakeng sa 'ho on'
MOHATO 2: Romela taelo ea ho notlolla makhetlo a 2 (notlolo => notlolla) u sebelisa sebaka se hole sa Firstech kapa sehole sa OEM (se khonang ho laola CM ka module ea data) Ka nako ena ponts'o ea DAS-II e tla qala ebe e lula e le matla bonyane metsotso e 5 kapa ho fihlela e khantšitsoe. e tima.
MOHATO 3: Tobetsa konopo ea lenaneo khafetsa ho fihlela sensor e lakatsehang e khethiloe 1-5 e bontšitsoeng tafoleng e ka tlase. (Konopo ea lenaneo e tla sebelisoa ho tsamaea
liphetoho tsa sensor le kutlo hang ha sensor e se e khethiloe.)
MOHATO 4: Hang ha sensor e se e khethiloe, tšoara konopo ea lenaneo bakeng sa metsotsoana ea 2 ho netefatsa khetho le ho kenya phetoho ea kutloisiso. Likhetho tsa tokiso li se li tla fumaneha ka li-setting tsa kamehla tse bonts'itsoeng. (Likhetho tsa kutlo li tla bontšoa tafoleng e ka tlase.)
MOHATO 5: tobetsa konopo ea "programming" khafetsa ho fihlela boemo bo lakatsehang bo fihlelleha (ho beha 0 ho tla bontša hore sensor e TLOHILE => ntle le khetho ea 2 maemo a sensor ea fensetere)
MOHATO 6: Tšoara konopo ea lenaneo bakeng sa metsotsoana e 2 ho boloka maemo a kutloisiso. Kamora hore litlhophiso li bolokehe, sensor e tla qala hape ho sensor 1. (haeba konopo ea lenaneo e sa hatelloa ka mor'a metsotsoana e 5 ka mor'a ho beha LED e tla khantša makhetlo a 2 ho boloka maemo le ho tsoa lenaneong la sensor)
MOHATO 7: Lenaneo le phethiloe, tima koloi, koala lifensetere le mamati 'me u qale ho etsa liteko
Buka ea DAS II
Lenaneo konopo
- Ho tshoha
- Fesetere Break Sensing Boemo
- Sensitivity ea Molumo oa Fesetere
- Sekama
- Motsamao
| Sebopeho | Tobetsa Konopo | Pontšo ea Mokhoa | Kutloelo-bohloko Fetola | ||||
| 1 | Maemo a Tšisinyeho (Temosong esale pele) Maemo a 10 | nako |  LED e khubelu ON |
|
 Boikutlo bo phahameng |
|
|
| 2 | Sekhahla sa Fesetere Ho utloa Boemo Maemo a 2 |
makhetlo a 2 |  Leseli le Lefubelu le Letala la LED ON |
|
|
|
|
| 3 | Sekhahla sa Fesetere Molumo Kutloelo-bohlokoMaemo a 6 |
makhetlo a 3 |  Tala LED ON |
|
 Boikutlo bo fokolang |
|
|
| 4 | Sekama
Maemo a 4 |
makhetlo a 4 |  Leseli le Lefubelu la LED |
|
|
|
Boikutlo bo phahameng |
| 5 | Motsamao
Maemo a 3 |
makhetlo a 5 |  Tala ea LED Flash |
– |
|
|
|
TLOA
Ea kamehla
Molumo le Vibration 
Ea kamehlaKHETHO EA DAS2 Shock Sensitivity FEELA mokhoa oa ho lokisa (NON DC3 CM FEELA)
MOHATO 1: Fetolela ho khantša ho ea sebakeng sa 'ho on'.
MOHATO 2: 2 Way li-remoutu-tšoara likonopo 1 le 2 (Notlela le ho notlolla) metsotsoana e 2.5. U tla fumana mabone a mabeli a ho paka makoloi. 1 Way remoutu tšoara Lock 'me Notlolla bakeng sa 2.5 metsotsoana. U tla fumana mabone a mabeli a ho paka makoloi.
MOHATO 3: Ho seta Sebaka sa Tlhokomeliso 1, (2way LCD) tlanya senotlolo kapa konopo I. (1 Way) tlanya Lock. Kamora ho fumana lebone le le leng la ho paka, tsoela pele ka tlhahlobo ea phello ea koloi. Hlokomela: Ka kopo hlokomela hore u se ke ua senya koloi nakong ea liphetoho tsa sensitivity. U tla fumana siren e lla 1-e matla ka ho fetesisa (tšusumetso e bobebe koloing e hlokang matla a fokolang ho qala ho lemosa) ka 10-bonyane bo bobebe (tšusumetso e matla koloing e hlokang matla a mangata ho tsosa tlhokomeliso). Sena se beha kutloelo-bohloko ea Warn Away Zone 1. Setting Zone 1 e tla iketsetsa Zone 2. Haeba u ka rata ho seta Zone 2 ka letsoho tsoela pele:
a. Ho seta Instant Trigger Zone 2, tlanya konopo ea 2. (1 Tsela: Notlolla) Kamora ho fumana mabone a mabeli a ho paka makoloi, tlanya koloi. U tla fumana siren e lla ka mokhoa o bonolo haholo ka 1-bonyane. Sena se beha maikutlo a Instant Trigger Zone 10.
MOHATO 4: Hang ha u fumana mabone a mabeli a ho paka makoloi, u se u loketse ho leka DAS ea hau.
KGETHO YA DASII Shock Sensitivity FEELA phetoho (NON DC3 CM FEELA)
MOHATO 1: Fetolela ho khantša ho ea sebakeng sa 'ho on'
MOHATO 2: Tšoara Foot Brake (etsa bonnete ba hore CM e bona ho kenya brake ea maoto)
MOHATO 3: Tap Notlela makhetlo a 3 ho tloha hole efe kapa efe ea Firstech (ho kenyeletsoa le li-remoutu tsa 1Button)
MOHATO 4: Release Foot Brake *Mabone a ho paka a tla bonesa makhetlo a 2 a netefatsa hore DAS e maemong a mananeo
MOHATO 5: CM e tla lla/honk/flash (makhetlo a 1-10) e bonts'a boemo ba hona joale ba kutlo.
MOHATO 6: U sebelisa sehole sefe kapa sefe sa Firstech, sehole sa OEM (se khonang ho Laola CM ka mojule oa data), kapa li-analog tsa Arm/Disarm, notlela kapa ho notlolla ha 1 ho eketsa kapa ho theola boemo bo le bong ba kutlo (ho fihla ho 1 (bonyane) kapa tlase. ho 10 (e hlokolosi haholo)) e tlamehang ho netefatsoa ke li-chirps/horn honks/ flashes
* pheta ts'ebetso ena ho fihlela boemo boo u bo batlang bo fihlile
a. Example 1. Boemo ba hona joale ba kutloisiso ke 4, re romella senotlolo se le seng re lokela ho amohela 1 chirp kapa honk e le 'ngoe ka mor'a motsotsoana o le mong oa litaelo tse sa kenang.
b. Example 2. Boemo ba hona joale bo behiloe ho 4, re romela senotlolo + lock + lock, ka mor'a metsotsoana e 1 ea ho se na litaelo tse kenang re lokela ho amohela li-chirps tse 3 kapa li-honks tsa lenaka.
c. Example 3. Boemo ba hona joale bo se bo behiloe ho 7, re romela ho notlolla + ho notlolla, ka mor'a motsotsoana o le mong ho se na litaelo tse kenang re lokela ho amohela li-chirps tse 1 / li-honks tsa lenaka / mabone a phakeng.
MOHATO 7: Metsotsoana e 5 ka mor'a netefatso ea ho qetela ea phetoho, CM e tla lla/horn honk/ho bonesa boemo ba kutlo *o tla ba le metsotsoana e meng e 5 ho etsa liphetoho
MOHATO 8: Lenaneo le phethiloe, tima koloi, koala lifensetere le mamati 'me u qale ho etsa liteko
Mokhoa oa ho etsa mananeo oa DC3 DASII
MOHATO 1: Fetolela ho khantša ho ea sebakeng sa 'ho on'
MOHATO 2: Romela taelo ea Notlolla makhetlo a 2 (notlolo => notlolla) u sebelisa remote efe kapa efe ea Firstech. Ka nako ena ponts'o ea DAS-II e tla qala 'me e lule e le matla bonyane metsotso e 5 kapa ho fihlela ho tima.
MOHATO 3: Tobetsa konopo ea lenaneo khafetsa ho fihlela sensor e lakatsehang e khethiloe 1-5 e bontšitsoeng tafoleng e ka tlase **. (Konopo ea lenaneo e tla sebelisoa ho tsamaisa liphetoho tsa sensor le kutlo hang ha sensor e se e khethiloe.)
MOHATO 4: Hang ha sensor e se e khethiloe, tšoara konopo ea lenaneo bakeng sa metsotsoana ea 2 ho netefatsa khetho le ho kenya phetoho ea kutloisiso. Likhetho tsa tokiso li se li tla fumaneha ka li-setting tsa kamehla tse bonts'itsoeng. (Likhetho tsa kutlo li tla bontšoa tafoleng e ka tlase.)
MOHATO 5: tobetsa konopo ea lenaneo khafetsa ho fihlela boemo bo lakatsehang ba kutlo bo fihlelleha (ho beha 0 ho tla bonts'a sensor e TLOHILE => ntle le khetho ea 2 maemo a sensor ea fensetere)
MOHATO 6: Tšoara konopo ea lenaneo bakeng sa metsotsoana e 2 ho boloka maemo a kutloisiso. Kamora hore litlhophiso li bolokehe, sensor e tla qala hape ho sensor 1. (haeba konopo ea lenaneo e sa hatelloa ka mor'a metsotsoana e 5 ka mor'a ho beha LED e tla khantša makhetlo a 2 ho boloka maemo le ho tsoa lenaneong la sensor)
TLHOKOMELISO: BAKENG SA DC3 ho khothaletsoa hore maemo a sensor a behoe ho H kapa boemo bo phahameng ka ho fetisisa.
Mothating ona etsa litokiso tse ling kapa tokiso e ntle ka ho sebelisa mohala o hlakileng (OFF=>1-10) qetellong ea DC3. Sena se tla lumella hore ho be bonolo ho etsa phetoho e tsoelang pele nakong eohle ea tlhahlobo.
MOHATO 7: Lenaneo le phethiloe, tima koloi, koala lifensetere le mamati 'me u qale ho etsa liteko
Buka ea DAS II
Lenaneo konopo
- Ho tshoha
- Fesetere Break Sensing Boemo
- Sensitivity ea Molumo oa Fesetere
- Sekama
- Motsamao
| Sebopeho | Tobetsa Konopo | Pontšo ea Mokhoa | Kutloelo-bohloko Fetola | ||||
| 1 | Maemo a Tšisinyeho (Temosong esale pele) Maemo a 10 | nako | LED e khubelu ON |
|
Boikutlo bo phahameng |
|
|
| 2 | Sekhahla sa Fesetere Ho utloa Boemo Maemo a 2 |
makhetlo a 2 | Leseli le Lefubelu le Letala la LED ON |
|
|
|
|
| 3 | Sekhahla sa Fesetere Molumo Kutloelo-bohlokoMaemo a 6 |
makhetlo a 3 | Tala LED ON |
|
Boikutlo bo fokolang |
|
|
| 4 | Sekama
Maemo a 4 |
makhetlo a 4 | Leseli le Lefubelu la LED |
|
|
|
Boikutlo bo phahameng |
| 5 | Motsamao
Maemo a 3 |
makhetlo a 5 | Tala ea LED Flash |
– |
|
|
|
TLHOKOMELISO: Moetsi kapa morekisi ha a jare boikarabello bakeng sa likotsi le/kapa ts'enyehelo e bakiloeng ke tlhokomelo e fosahetseng ea sehlahisoa joalo ka ho bola, ho fetola, le phetoho e entsoeng ke mosebelisi ka boithaopo.
TLHOKOMELISO: Ha hoa lokela ho ba le likhoele tse tsamaisoang haufi le lipedali tse ka bakang kotsi ea ho khanna
Mabitso a Tšehetso ea Tekheniki
Thuso ea botekgeniki ea Firstech e boloketsoe barekisi ba lumelletsoeng FEELA bareki ba tlamehang ho ikopanya le lits'ebeletso tsa bareki bakeng sa thuso.
Mantaha - Labohlano: 888-820-3690
(7:00 am - 5:00 pm Pacific Standard Time)
BAHOEBI BA SEBELISANG FIRSTECH FEELA Lengolo-tsoibila: support@compustar.com
Web: https://install.myfirstech.com
Litšoantšo tsa Wiring
Eya ho https://install.myfirstech.com ho fumana lintlha tsa wiring. Haeba u morekisi ea lumelletsoeng 'me u sa khone ho fumana sebaka sena sa marang-rang, ka kopo ikopanye le morekisi oa hau oa thekiso kapa re letsetsa 888-8203690 Mantaha ho fihlela Labohlano, 8am ho 5pm Pacific Standard Time.
LINTLHA TSEO:
Multi Sensor Tharollo
https://install.myfirstech.com
Litokomane / Lisebelisoa
 |
FIRSTECH DASII-2021 Programming [pdf] Litaelo DASII-2021 Programming, DASII-2021, Programming |
