FATEK FBs-1LC Load Input Module

Selelekela

FBs-1LC / FBs-2LC ke e 'ngoe ea li-module tsa ho kenya analoge tsa FATEK FBs series PLC. E ts'ehetsa mocha o le mong / tse peli oa ho kenya lisele tsa mojaro bakeng sa ho lekanya boima ba 'mele.
Sephetho sa phetoho se emeloa ke boleng bo saennoeng ba 16 bit integer. E le ho sefa lerata la tšimo le behiloeng ka pontšo, e boetse e fana ka karolelano ea sample
mosebetsi oa ho kenya.

Hlokomela:

1. Tšehetso ea tlhophiso ea I/O bakeng sa mojule oa FBs-1LC/2LC e fumaneha feela bakeng sa PLC OS V4.71 le Winproladder V3.22 kapa phetolelo ea morao-rao.
2. Bakeng sa lits'ebetso tsa pele tse sa sebeliseng I/O configuration ho sebetsa le 1LC module li ntse li ka sebetsa hantle ha feela ho se na taolo ea mojule ea FBs-2LC e hlokahalang.

Litlhaloso tsa FBs-PLC Methalo ea Mekhalo ea Lisele

FBs-1LC/ FBs-2LC Methalo ea Tekanyo ea Lisele

Litlhaloso	FBs-1LC	FBs-2LC
Kakaretso ea likanale	mocha o le mong	dikanale tse pedi
Qeto	Li-bits tse 16 (kenyelletsa karolo e saennoeng)
Lintlha tsa I/O tse Nkiloeng	1 RI(Input Register) le 8 DO
Sekhahla sa ho Fetola	5/10/25/30/60/80 Hz	1/3 / 5/8 Hz
E se nang Linearity	0.01% FS (@25℃)
Zero Drift	0.2 μV/℃
Fumana Drift	10 ppm/℃
Phatlalatso Moqtage	5V e nang le bokhoni ba ho khanna ba 100Ω
Kutloelo-bohloko	2mV/V, 5mV/V, 10mV/V, 20mV/V
Setlhopha sa Software	Karolelano e tsamaeang
Karolelano ea Samples	1 ~ 8 e ka hlophisoa
Ho behwa ka thoko	Transformer(Matla) le photo-coupler(Letšoao)
Lisupa	5V PWR LED
Phepelo ea Matla	24V-15%/+20%, 2VA
Tšebeliso ea Matla a ka Hare	5V, 100mA
Mocheso oa ho sebetsa	0 ~ 60 ℃
Mocheso oa polokelo	-20 ~ 80 ℃
Litekanyo	40(W)x90(H)x80(D) limilimithara

Mekhoa ea ho Sebelisa FBs-PLC Load Cell Module

Qala
E hokela li-Module tsa Load Cell ho sebopeho sa katoloso ho PLC ka letoto mme e hokela mohloli oa kantle oa 24VDC le lithapo tsa ho kenya litekanyo tsa sele.
Phetha WinProladder 'me u lokise aterese ea tafole ea tlhophiso ea lisele tsa mojaro, aterese ea ngoliso, le ngoliso ea ho sebetsa lifensetereng tsa tlhophiso ea lisele tsa mojaro, joale o ka bala registara ea boima ba boima ka kotloloho.

Mekhoa ea ho Lokisa Tekanyo ea Lisele Tsa Mojaro

Tobetsa ntho "I/O Configuration" e ho Project Windows:

Hang ha leqephe la litlhophiso le bonts'a, le khona ho lekanya mojule oa sele ea mojaro.

1. (Registara e qalang ea tafole ea litlhophiso):
   Fana ka boleng ba ngoliso ea ho qala ho boloka tafole ea tlhophiso ea cell cell, ho tla lumella lintlha tse latelang:
   RXXXX kapa DXXXX
   Tafole ea tlhophiso e nka feela 4 + N ea lirekoto, moo N e leng palo ea li-module tsa cell cell.
   Joalokaha ho bontšitsoe ka holimo example, R5000~ R5005 e boloka tafole ea tlhophiso ea sele ea mojaro.
2. (Rejisetara e qalang ea rejisetara ea ho bala/taolo):
   Ka kopo, kenya nomoro ea ho qala ea rejisete ea block e neng e abetsoe ho amohela boleng ba tekanyo le liparamente tsa taolo bakeng sa load cell
   Ho tla lumella likenyelletso tse latelang, RXXXX kapa DXXXX mocha o le mong o na le ngoliso ea 16.
   Joalokaha ho bontšitsoe ka holimo example, kanale 1 e sebelisitsoeng R0 ~ R15.
3. (Rejisetara ea ho qala ea ngoliso ea mosebetsi):
   Abela lirejisete tsa ho qala ho boloka lirejisete tsa tšebetso, ho tla lumella lintlha tse latelang RXXXX kapa DXXXX.
   Rejistara ea selekanyo sa selekanyo sa mojaro e sebetsa (Nx4)+5 lirejistara, moo N e leng palo ea li-module tsa load cell.
   Joalokaha ho bontšitsoe ka holimo example, D0~D12 ke lirejisete tse sebetsang.
   Lintlha: Litlhophiso tse tharo tse ka holimo li ka sebelisoa ho li-module tsa Load Cell.
   【Laola tlhaiso-leseling ea ho kenya module ea sele le ho seta】
4. (Mojule #1 ~ #16﹞:
   Hlahisa lebitso la module e kentsoeng le aterese ea ho qala ea analog ea eona, ho na le li-module tse latelang.
   1 FBs-1LC (mojule o le mong oa mohala oa selefouno)
   2 FBs-2LC (liteishene tse 2 tsa module cell cell
5. (Span Ch0# / Ch1#﹞:Abela mefuta e latelang ea litekanyo:
   0~10mV(2mV/V), 0~25mV(5mV/V), 0~50mV(10mV/V),
   0~100mV(20mV/V)
6. (Scan Rate﹞:Abela sekhahla sa boleng ba ho bala, ho na le likhetho tse peli:
   1 FBs-1LC e na le 5 / 10 / 25 / 30 / 60 / 80 Hz e ka abeloa
   2 FBs-2LC e na le 1 / 3 / 5 / 8 Hz e ka abeloang
7. (Linako tsa Karolelano): Fana ka nako ea karolelano ea selekanyo sa sele ea mojaro, karolelano e sa leka-lekaneng, makhetlo a 2 ka karolelano, makhetlo a 4 ka karolelano, le linako tse 8 tsa karolelano li ka abeloa.

Kenya rejisetara ea ho bala / ho laola

Tafoleng e latelang, ha re nke hore rejisetara ea ho qala ea ho bala/taolo ke R

Ngolisa Offset	Tlhaloso	R/W
R+0	Boleng ba boima ba boenjiniere	R
R+1	Boleng ba boima bo tala	R
R+2	Boleng bo phahameng ba boenjineri. Max. 32767	W
R+3	Ngoliso ea litaelo- Bit 0 - seta referense ea zero/tare Bit 1 - beha referense e phahameng(sekala se felletseng).	W
R+4	Auto zero moeli 0~255	W
R+5	Rejista ea maemo Bit 0 - Pontšo ea phoso Bit 1 - Ho feta mefuta e mengata kapa pontšo e robehileng ea sensor	R
R+6	Boleng ba SPAN (referense e phahameng -zero reference)	R
R+7	Boleng ba noto bo behiloe ka ho etsa setifikeiti sa zero	R
R+8	Boleng ba hona joale ba lefela	R
R+9	Ngolisa bakeng sa ts'ebeliso ea ts'ebetso ea kahare	R
R+10~R+15	Reserved

Channel ka 'ngoe e na le lirejisetara tse 16.

Hlokomela:

1. Registara ea R+2, R+3, R+4 feela e behiloe ke mosebelisi, ngoliso e 'ngoe e behiloe ke sistimi
2. R+3:
   Bit 0 = 1, beha boleng ba hona joale ba tekanyo e le chefo
   Bit 1 = 1, bakeng sa SPAN. seta boleng ba tekanyo ea hajoale ho tlosa boleng ba referense ea zero joalo ka boleng bo phahameng ba litšupiso bo tsamaellanang le boleng ba boima bo behiloeng ho R+2
3. Mosebedisi a ka fetolela boleng ba boenjineri ka bobona ka ho supa boleng ho rejisetara ya R+2,R+6 ha ho hlokahala
4. Letšoao la phoso le kenyelletsa boleng bo phahameng ba boenjineri ba litšupiso(R+2) kapa SPAN(R+6) ke lefela kapa ha mpe
5. Auto zeroing threshold -
   Boleng bona bo akaretsa sebaka se sa mamelleheng ho hoholeha ho lefela. Haeba boleng ba lefela bo oela sebakeng sena, lefela le tla lefshoa. Beha boleng bona ho zero ho tla tima tšebetso ea auto zeroing.
6. D4052 - nako ea ho lieha bakeng sa auto zeroing activation , ho tloha ho 1000 ~ 5000 (mS), kamehla ke 3000 (mS).

Tlhaloso ea Lingoliloeng tse Amanang tsa Tekanyo ea Lisele tsa Meroalo

Boemo ba ho Kenyeletsoa ha Moroalo oa Sele

• R4016 : B0 = 1 e bolela hore mocha oa pele o kentsoe
  • B15=1 e bolela hore mocha oa bo15 o kentsoe
  • (ea kamehla ea R4016 ke FFFFH)
• R4017 : B0=1 e bolela hore kanale ea bo16 e kentsoe
  • B15=1 e bolela hore mocha oa bo31 o kentsoe
  • (ea kamehla ea R4017 ke FFFFH)
• Ha sele ea mojaro e kenngoa (karolo e lumellanang e tlameha ho ba 1), tsamaiso e tla etsa hore mohala o robehe. Haeba ho na le mohala o robehileng o etsahetse, boleng bo robehileng -32760 bo tla bontšoa.
• Ha sele ea mojaro e sa kengoa (karolo e lumellanang e tlameha ho ba 0), sistimi e ke ke ea etsa tlhahlobo e robehileng ea mohala. Theko e robehileng e tla ba 0.
• Ho ipapisitse le ho kengoa ha mosebelisi, lenaneo la lere le ka laola likotoana tse tsamaellanang tsa R4016 le R4017 ho etsa kapa ho se etse ponelopele e robehileng.

I/O Addressing of Load Cell Module

Wiring of Load Cell Modules

Mohala oa FBs-2LC

Litokomane / Lisebelisoa

FATEK FBs-1LC Load Input Module [pdf] Bukana ea Mosebelisi FBs-1LC, FBs-2LC, FBs-1LC Load Input Module, Load Cell Input Module, Cell Input Module, Input Module, Mojule

Litšupiso

• Bukana ea Mosebelisi