ETC Retrofit Guide
Sesebelisoa sa Taolo ea Matla Mk2

Fetileview

Hlokomela: The Power Control Processor Mk2 Retrofit Kit ke ea ho sebelisoa le liphanele tse seng li se na Power Control Processor Mk2 e kentsoeng.
Power Control Processor Mk2 (PCP-Mk2) e sebelisoa ho Echo Relay Panel Mains Feed le Elaho Relay Panel Mains Feed (ERP Mains Feed), Echo Relay Panel Feedthrough le Elaho Relay Panel Feedthrough (ERP Feedthrough), le mekhoa ea Sensor IQ. Litsamaiso tsena li ts'ehetsa ho nkela sebaka sa "Power Control Processor".
Hlokomela: Power Control Processor Mk2 ha e tšehetse Option ea Override Relay Panel (ORPO). Haeba u kentse ORPO phanele ea hau e ke ke ea sebetsa ka mor'a hore u kenye Power Control Processor Mk2.

E kenyelelitsoe ho Retrofit Kit

Tlhaloso	ETC Karolo ea Nomoro	Bongata	Lintlha
PCP Mkt user interface	7123A2216-CFG	1
Motlakase oa ho kopanya matla	7123B7021	1	mebala e tsheletseng
Sekotwana sa ho boloka	HW7519	1	bakeng sa thapo ya ribone ya mosebedisi
Sepakapaka sa nylon	HW9444	2	bakeng sa ho tsamaisa RideThru Option Card ho tloha ho sehokelo sa khale sa mosebelisi ho ea ho sehokelo se secha sa mosebelisi ho ERP Mains Feed kapa ERP Feedthrough, ha ho hlokahala.
Boemo ba ho ema	HW9491	4	bakeng sa ho hlophisa bocha Karete ea Khetho ea RideThru ka phanele ea Sensor IQ, ha ho hlokahala
Sehokelo sa CatS	N2026	1	sehokelo sa likarolo tse peli bakeng sa ho felisoa ha cable ea CatS
Lebokose la Surface-mount CatS	N2025	1	bakeng sa ho felisoa ha cable ea CatS
Theipi ea lithupa tse peli, 1.5 in	1342	1	bakeng sa ho felisoa ha cable ea CatS
Cable tie sekgomaretsi thaba	HW741	2	bakeng sa ERP Mains Feed
thae ea cable..	HW701	2	bakeng sa ERP Mains Feed
4 ft Cat5 patch cable	N4009	1	bakeng sa ERP Mains Feed
1 ft Cat5 patch cable	N4036	1	bakeng sa ERP-Feedthrough le Sensor IQ

Lisebelisoa tse Hlokehang

• Screwdriver ea Phillips
• Slip pliers e kopaneng
• Sesebelisoa sa sheathing kapa sekhechana sa baki ea cable ea Cat5
• Snips kapa sesebelisoa se seng se nepahetseng sa ho itšeha (feela bakeng sa Sensor IQ)

Kenya Power Control Processor Mk2
TLHOKOMELISO: KOTSI EA HO SHOA KE MOTLATSI! Ho hloleha ho hokela matla ohle phanele pele ho sebetsa ka hare ho ka baka kotsi e mpe kapa lefu.
Fokotsa phepelo ea mantlha phanele ebe u latela Lockout e nepahetseng/Tagho ntša mekhoa e laetsoeng ke NFPA 70E. Ho bohlokoa ho hlokomela hore lisebelisoa tsa motlakase joalo ka liphanele tsa relay li ka hlahisa kotsi ea arc flash ha e sa sebetsoe ka nepo. Sena se bakoa ke bongata bo boholo ba nako e khuts'oane e fumanehang phepelong ea motlakase ho sesebelisoa sena. Mosebetsi ofe kapa ofe o tlameha ho latela Mekhoa e Sireletsehileng ea ho sebetsa ea OSHA.
Hakolla Wiring ho Sebui sa Khale sa Mosebelisi
Power Control Processor Mk2 e tsamaea ka sekepe ka sekotwana se le seng (ETC karolo ea nomoro ea HW7519) ho sireletsa thapo ea ribone ea mosebelisi e grey ho hlooho ho Power Control Processor e ncha ea Mk2.
Hlokomela: Batla setikara sa nomoro ea karolo e tšoeu ho processor ea hau ea khale ea Power Control. Haeba karolo ea nomoro e le 7123B5623 rev F kapa pejana, hlooho ea thapo ea ribone e na le li-tab tse sireletsang thapo ea ribone hloohong. Sheba setšoantšo se ka letsohong le letona bakeng sa lintlha tse mabapi le ho hakolla thapo ea ribone.

1. Tlosa sekotwana sa retainer kapa o mena li-tab tse sirelletsang thapo ea ribone hloohong ho sehokelo sa khale sa mosebelisi 'me ka bonolo u hule thapo ea lente ho tloha hloohong. Sheba lengolo le ka holimo.
   • Haeba segokanyimmediamentsi sa sebolokigolo sa hao sa kgale se na le sekotwana sa ho boloka, o ka se lahla. Sekotwana se secha sa ho boloka se fanoe ka har'a kit.
2. Lekola karolo ea nomoro ea mohala oa matla a mebala e tšeletseng pakeng tsa boto ea ho emisa le sebopeho sa khale sa mosebelisi.
   • Haeba mohala oa khoele e se 7123B7021, o hakolle 'me u o lahle. U tla sebelisa marang-rang a 7123B7021 a fanoeng ka har'a khiti.
   • Haeba mohala oa marang-rang e le 7123B7021, u ka o sebelisa hape. E tlose ho sebopeho sa khale sa mosebelisi, empa e tlohele e hokahane le boto ea pheliso. U ka boloka wiring
   harness 7123B7021 e fanoeng ka har'a kit e le sekheo kapa e lahle.
3. Haeba phanele ea hau e kentsoe RideThru Option Card, latela mehato ea Move a RideThru Option Card - ERP Mains Feed kapa Feedthrough ea ERP leqepheng la 3.
   • Haeba o sena RideThru Option Card, tswela pele ka Connect Wiring ho PCP-Mk2 leqepheng la 4. O ka lahla ditokelo tse nne tsa snap-in standoffs (HW9491) ho khithi.

Tsamaisa RideThru Option Card – ERP Mains Feed kapa ERP Feedthrough

1. U ka lahla li-standoffs tse 'ne tsa snap-in (HW9491) ho tloha khiti.
2. Hakolla likhoele tse khubelu le tse ntšo ho hlooho ea "ride thru" ea khale ea mosebelisi ea li-pin tse peli.
3. Tlosa li-screws tse tharo tse sirelletsang RideThru Option Card ho sebopeho sa khale sa mosebedisi.
   • Beha likurufu tse tharo ka thoko bakeng sa ho kenya hape.
   • Boloka li-spacers tse kentsoeng ka likurufu tsena. U tla hloka kakaretso ea li-spacers tse tharo ho kenya RideThru Option Card ho sebopeho se secha sa mosebedisi. Li-spacers tse peli (karolo ea karolo ea ETC HW9444) li kenyelelitsoe ho Power Control Processor Mk2.
   Phatlalatso Kit.
4. Sireletsa karete ea Khetho ea RideThru sehokelong se secha sa mosebelisi ka likurufu tse tharo tseo u li tlositseng ka holimo, u behile sekhechana se le seng holim'a screw ka 'ngoe pakeng tsa sehokelo sa mosebedisi le borakete ea RideThru Option Card.
5. Hokela pheletso e sa lefelloeng ea lithapo tse khubelu le tse ntšo ho Karete ea Khetho ea RideThru ho hlooho ea "ride thru" ea "ride thru" sehokelong se secha sa mosebelisi.
6. Tsoela pele ka Connect Wiring ho PCP-Mk2 leqepheng le latelang.
   Tsamaisa Karete ea Khetho ea RideThru - Sensor IQ

TLHOKOMELISO: Haeba u nkela Power Control Processor Mk2 sebakeng sa Sensor IQ phanele ka RideThru Option Card e kentsoeng phanele, mokhoa oa karete ea ho khetha ea RideThru ke oa bohlokoa. Li-capacitor tse hlahang ho RideThru Option Card li ka kena-kenana le khokahanyo ea marang-rang ho Power Control Processor Mk2. Etsa bonnete ba hore li-capacitor tse hlahelletseng ho Karete ea Khetho ea RideThru li behiloe hole haholo le motlakase oa motlakase.tage
phaposi.

• Li-capacitor li lokela ho supa tlase ka phanele ea phepelo e holimo.
  
• Li-capacitor li lokela ho supa phanele ea phepelo e tlase.

Hlokomela: Sensor IQ e bontšitsoeng ka holimo e behiloe ka mokhoa oa ho fepa ka holimo. Ka phanele ea phepelo e tlase, beha Khetho ea RideThru leboteng le ka tlase ho le letona la molumo o tlase.taglebokose le nang le li-capacitor tse lebisitsoeng holimo (hole le li-mains voltage phaposi).
Haeba RideThru Option Card ea hau e kentsoe phanele ea Sensor IQ ea hau ka tsela e nepahetseng, tsoela pele ka Connect Wiring ho PCP-Mk2 leqepheng le latelang. U ka lahla li-standoffs tse 'ne tsa snap-in (HW9491) ho tloha khiti.
Latela mehato ena haeba u hloka ho hokahanya karete ea khetho ea RideThru phanele ea hau ea Sensor IQ:

1. Tlosa mamati le likoahelo ho tloha phanele. Sheba Buka ea Tlhophiso ea Sensor IQ bakeng sa litaelo tsa ho ntša mamati le likoahelo.
2. Hakolla likhoele tsa terata tse khubelu le tse ntšo ho Karete ea Khetho ea RideThru.
3. Khaola malebela ho li-standoffs tse 'ne tsa snap-in tse sirelletsang Karete ea Khetho ea RideThru ho phanele ea Sensor IQ. Tlosa li-standoffs ho phanele le ho Karete ea Khetho ea RideThru.
4. Ho fanoe ka li-standoffs tse 'ne tse ncha bakeng sa ho kenya karete ea khetho ea RideThru phanele ea Sensor IQ. Lokisetsa li-standoffs tse 'ne le masoba a ntseng a phahama ho Karete ea Khetho ea RideThru.
5. Tobetsa ka bonolo holim'a li-standoffs ho fihlela li-tab li feta likoti tse ntseng li kenngoa kareteng ea khetho ebe u notlela sebakeng seo.
6. Tsamaisa karete ea Khetho ea RideThru e nang le li-capacitor tse hlahelletseng tse behiloeng hole haholo le maqhubu a motlakase.tage compartment. Sheba setšoantšo se leqepheng la 3.
   • Li-capacitor li lokela ho supa tlase phanele ea phepelo e kaholimo.
   • Li-capacitor li lokela ho supa phanele ea phepelo e tlase.
7. Kamora ho tsamaisa karete ea khetho ea RideThru ka nepo, hokahanya li-standoffs le masoba a ntseng a hola kahare ho molumo o tlase.tage cavity.
8. Tobetsa ka bonolo holim'a li-standoffs ho fihlela li-tab li feta har'a masoba a ntseng a phahama ka lowvoltage pata 'me u notle karete ea Khetho ea RideThru sebakeng sa eona.
9. Hokela ntlha e 'ngoe ea mohala o mofubelu le o motšo ho Karete ea Khetho ea RideThru.
10. Kopanya ntlha e 'ngoe ea mohala o mofubelu le o motšo ho hlooho ea "ride thru" ea "ride thru" e ncha ea mosebedisi.

Hokela Wiring ho PCP-Mk2

1. Kenya thapo ea lente e bohlooho hloohong ho sebopeho se secha sa mosebelisi 'me u se sireletse ka sekotwana sa ho boloka (ho kenyelelitsoe, nomoro ea karolo ea ETC HW7519).
2. Kenya marang-rang a matla a mebala e tšeletseng (7123B7021).
   • Haeba ha e so hokahane, hokela sehokedi se sa ngolwang sethapong le hloohong ya board board e ngotsweng.
   - "J10 MOLAOLI MATLA" bakeng sa ERP-FT
   - "J4 CONTROL" bakeng sa ERP Mains Feed
   - "J9 CONTRL POWER" bakeng sa Sensor IQ
   • Hokela sehokedi se ngotsweng ka hara marapo ho sebopeho se setjha sa mosebedisi ho hlooho e ngotsweng “J3 POWER”.

Emisa Khokahano ea Marang-rang
Power Control Processor Mk2 e na le sebopeho se kopantsoeng sa marang-rang. The Power Control Processor Mk2 Retrofit Kit e kenyelletsa lithapo tsa patch le sehokelo sa Unshielded Twisted Pair (UTP) ho u lumella ho sebelisa thapo ea hau e kenang ea Cat5 le ho fana ka liphallelo.
Fumana likarolo tsa Panel ea hau
Fumana likarolo tse latelang tse fanoeng ka har'a kit ea retrofit.
ERP Feedthrough kapa Sensor IQ

Tlhaloso	ETC Karolo ea Nomoro	Bongata
Sehokelo sa Cat5	N2026	1
Lebokose la Surface-mount Cat5	N2025	1
Theipi ea lithupa tse peli, 1.5 in	I342	1
1 ft Cat5 patch cable	N4036	1

ERP Mains Feed

Tlhaloso	ETC Karolo ea Nomoro	Bongata
Sehokelo sa Cat5	N2026	1
Lebokose la Surface-mount Cat5	N2025	1
Theipi ea lithupa tse peli, 1.5 in	I342	1
Cable tie sekgomaretsi thaba	HW741	2
Thae ea mohala	HW701	2
4 ft Cat5 patch cable	N4009	1

Tlosa Karete ea Khetho ea Ethernet ea Khale
ERP Feedthrough

1. Hakolla likhoele tsa terata tse mebala e mehlano lipakeng tsa Ethernet Interface Option Card le Boto ea Pheliso.
2. Hakolla thapo ea Cat5 e kenang kareteng ea Ethernet Interface Option Card.
3. Tlosa li-screws tse 'nè tse sirelletsang Ethernet Interface Option Card ho phanele ea sebopeho sa mosebelisi.
4. Tlosa karete ho tloha phanele.
5. Ethernet Interface Option Card ha e tsamaellane le Power Control Processor Mk2.
   U ka lahla karete ea khetho le li-screw.
6. Haeba thapo ya netweke e se e fedisitswe lebokosong le hodima letlapa, tswela pele ka Hokela Patch Cable leqepheng la 8. Haeba thapo ya netweke e eso kgaotswe phanele ya hao, tswela pele ka Wata Sehokelo leqepheng la 7.

ERP Mains Feed

1. Hakolla likhoele tsa terata tse mebala e mehlano lipakeng tsa Ethernet Interface Option Card le Boto ea Pheliso.
2. Hakolla thapo ea Cat5 e kenang kareteng ea Ethernet Interface Option Card.
3. Tlosa li-screws tse 'nè tse sireletsang sekoahelo holim'a Ethernet Interface Option Card.
4. Tlosa li-standoffs tse 'ne tse sirelletsang Ethernet Interface Option Card ho ea tlase ho phanele.
5. Tlosa karete ea khetho ea Ethernet Interface.
6. Ethernet Interface Option Card ha e tsamaellane le Power Control Processor Mk2.
   U ka lahla karete ea khetho, li-standoffs, screws, le sekoaelo sa karete ea khetho.
7. Haeba thapo ya netweke e se e fedisitswe ho ya lebokosong le hodima bokahodimo, tswela pele ka Hokela Patch Cable leqepheng la 8. Haeba thapo ya netweke e eso kgaotswe phanele ya hao, tswela pele ka Wata Sehokelo leqepheng le shebaneng.

Sensor IQ

1. Hakolla likhoele tsa terata tse mebala e mehlano lipakeng tsa Ethernet Interface Option Card le Boto ea Pheliso.
2. Hakolla thapo ea Cat5 e kenang kareteng ea Ethernet Interface Option Card.
3. Khaola malebela ho li-standoffs tse 'ne tsa snap-in tse bolokang Ethernet Interface Option Card ho phanele ea Sensor IQ. Tlosa li-standoffs le Ethernet Interface Option Card ho phanele.
4. Ethernet Interface Option Card ha e tsamaellane le Power Control Processor Mk2. U ka lahla karete ea khetho.
5. Haeba thapo ya netweke e se e fedisitswe ho ya lebokosong le hodima bokahodimo, tswela pele ka Hokela Patch Cable leqepheng la 8. Haeba thapo ya netweke e eso kgaotswe phanele ya hao, tswela pele ka Wata Sehokelo leqepheng le shebaneng.

Thala Sehokelo

Haeba thapo ea marang-rang e se e felisitsoe ka har'a phanele ea hau, tlola karolo ena 'me u tsoele pele ka Hokela Patch Cable leqepheng le latelang. Haeba thapo ea marang-rang ha e so felisoe phanele ea hau, latela litaelo tse ka tlase.
Sehlopha sa 5 se kopanya holim'a holim'a sefahleho se fanoeng ka har'a kit ena se kenyelletsa likotoana tse peli: setsi sa motheo le cap. Sekoahelo se na le matšoao a mebala ntlheng e 'ngoe ho bontša moo ho ka kenngoa mohala o mong le o mong oa mohala o nang le mebala. Latela sekema sa wiring sa T568B, joalo ka ha se bonts'itsoe ho cap sticker, bakeng sa ho lumellana le likopano tsa marang-rang tsa ETC.

1. Tlohela bolelele ba hoo e ka bang 25 cm (10 in) phanele bakeng sa ho hokela le ho thella bakeng sa litlhoko tsa ts'ebeletso tsa nako e tlang.
2. Latela mekhoa e tloaelehileng ea ho kenya Cat5 ho tlosa pheletso ea baki ea cable le ho pepesa li-conductor:
   • Tlosa hoo e ka bang 13 mm (1/2 in) qetellong ea baki ea cable e ka ntle u sebelisa sesebelisoa sa sheathing kapa sehahi, ho etsa bonnete ba hore u se ke ua senya li-insulation tsa li-conductors tse ka hare. Haeba e le 'ngoe kapa tse ngata tsa li-conductor li senyehile nakong ea ts'ebetso ena, khaola mohala ka ho toba 'me u qale hape.
3. Sotola li-conductor 'me u li behe ho latela matšoao a mebala a T568B.
   Kenya li-conductors ka har'a cap ea sehokelo. Sekoti sa cable se lokela ho atamela haufi le moeli oa sehokelo ka li-conductor tse nyane tse bonahalang kamoo ho ka khonehang. Ho seng joalo, khaola thapo ka botlalo 'me u qale hape.
4. Haeba li-conductors li fetela ka nģ'ane ho moeli oa sekoahelo sa sehokelo, fokotsa ho feteletseng e le hore lipheletsong tsa li-conductors li phunyeletse ka bohale ba sekoahelo sa sehokelo.
5. Tobetsa kepisi ka thata holim'a setsi sa sehokelo ho fihlela likotoana tse peli li hoholeha. Sebelisa li-slip joint pliers ho kenya khatello ka ho lekana ho pholletsa le cap le ho tiisa khokahanyo, empa etsa bonnete ba hore u se ke ua senya polasetiki ha u ntse u sebelisa khatello.

Hokela Sehokelo Lebokoseng le Kopane

1. Kenya karolo e ka pele ea sehokelo ka har'a lebokose le ntseng le hola e le hore sekotjana se moeling o ka pele oa sehokelo se ikamahanye le tabo e karolong e ka tlase ea lebokose.
2. Tobetsa ka morao ho sehokelo ho se kenya ka lebokoseng.
3. Karolo e ka morao ea sekoahelo e na le sekoahelo se senyenyane sa U. Tlosa cutout ena ho lumella thapo hore e fete ntle le ho hatelloa. Tsamaisa thapo ka tataiso ea lebokose joalokaha ho bontšitsoe.
4. Lumellana sekoahelo le karolo e ka tlaase 'me u kopanye likotoana tse peli hammoho.

Kenya Sehokelo ka Phanele
Sebelisa teipi e mahlakoreng a mabeli e fanoeng ka har'a kit ea retrofit ho hokela karolo e ka tlase ea lebokose le holimo ho phanele ea hau. Sheba lipapiso tse latelang.

Hokela Patch Cable
ERP Feedthrough kapa Sensor IQ
Hokela thapo ea patch ea 1 ft (N4036) ho tloha sehokelong se kaholimo ho ea ka morao ho sebopeho sa mosebelisi.

• Lahla thapo e sa sebelisoeng ea 4 ft patch (N4009).

Hlokomela: Sensor IQ e bontšitsoeng ka holimo e behiloe ka mokhoa oa ho fepa ka holimo.

ERP Mains Feed
Top-Feed

1. Tsamaisa thapo ea patch ea netweke ea 4 ft (N4009) ka thapo ea ribone e butsoeng ka tlase ho sebaka se koaletsoeng sa sehokelo sa mosebelisi, ka mor'a phanele e kentseng karete ea relay ho lebokose le ka holimo.
   • Thepa e kenyelletsa thae ea cable le sekhomaretsi sa cable tie ho roala thapo ea patch, ha ho hlokahala.
2. Hokela thapo ea patch lebokoseng le holimo-limo.
3. Hokela thapo ea patch ka morao ho sebopeho sa mosebelisi.
4. Lahla thapo e sa sebelisoeng ea 1 ft patch (N4036).

Tlase Feed

1. Tsamaisa thapo ea patch ea 4 ft network (N4009) ho tloha ka holim'a lebokose, ka mor'a phanele ea ho kenya karete ea relay, le ka thapo e buloang ka tlase ho sebaka sa mosebelisi.
   • Thepa e kenyelletsa thae ea cable le sekhomaretsi sa cable tie ho roala thapo ea patch, ha ho hlokahala.
2. Hokela thapo ea patch ka morao ho sebopeho sa mosebelisi.
3. Hokela thapo ea patch lebokoseng le holimo-limo.
4. Lahla thapo e sa sebelisoeng ea 1 ft patch (N4036).

Lokisa processor
Hlokomela: Kamora ho hlophisa PCP-Mk2 ka UI, boloka tlhophiso file ebe o qala PCP-Mk2 hape.

Kena ho Factory Menu

1. Tšoara konopo ea [1] ha u ntse u qalisa processor bocha ho fihlela lethathamo la liteko tsa tlhahiso le hlaha.
   • Ho bulela processor botjha: Tobetsa switch ya ho seta botjha tlase letsohong le letona ka ntho e sa hlabang, e motsu (mohlala, pene).
2. Hlakola senotlolo sa [1].
   • Joale o tla khona ho kena ho menu ea Manufacturing Tests.
3. Sebelisa [Holimo] () le [Tlase] () ho ea ho menu ea Rack Class Test.
4. Tobetsa [Enter] (ü) ho netefatsa khetho.
5. Sebelisa [Holimo] () le [Tlase] () ho khetha mofuta o nepahetseng oa rack ebe o tobetsa Enter ho etsa khetho.
   • ERP – bakeng sa liraka tsa US ERP
   • ERPCE - bakeng sa mekhoa ea CE EchoDIN
   • Sensor IQ – bakeng sa Sensor IQ Intelligent Breaker Panels
   • ERP-FT – bakeng sa liraka tsa ERP-FT
6. Tobetsa [Ka morao] ( ) makhetlo a mabeli ho tsoa ho menu ea feme.

Tekanyo ea Matla
Hlokomela: Tekanyo ea phepelo ea motlakase e sebetsa feela ho liphanele tsa ERP Mains Feed le Sensor IQ. Haeba phepelo ea motlakase e sa hlophisoa hantle, yuniti e tla hlahisa BACK UP POWER ACTIVE skrineng, kapa e tla hlahisa vol e fosahetseng.tage makgabane.

Ho lekanya phanele, o tla hloka tekanyo ea molumo o kenangtage. PhatlalatsotagTekanyo e lokela ho etsoa feela ke basebetsi ba koetlisitsoeng ba apereng lisebelisoa tse nepahetseng tsa ts'ireletso.

1. Kena ho Factory Menu. Sheba Fumana Menu ea Fektheri leqepheng le fetileng.
2. Sebelisa [Holimo] () le [Tlase] () ho ea ho Calibration.
3. Sebelisa senotlolo sa linomoro ho kenya molumo o lekantsoengtage, e atisitsoe ka 100.
   • Bakeng sa mohlalaample, haeba matla a hao a lekantsoengtage ne e le 120.26 V, o tla kenya 12026.
4. Tobetsa [Ka morao] ( ) ho tsoa skrineng sa Calibration.
5. Tobetsa [Ka morao] ( ) lekhetlo la bobeli ho qala software ea mantlha.

Boloka Tlhophiso
Ho boloka tlhophiso ea phanele ho theha a file bakeng sa polokelo bukeng ea motso ea sesebelisoa sa polokelo ea USB se hokahaneng.

1. Kenya sesebelisoa sa polokelo ea USB boema-kepeng ba USB ka lehlakoreng le letšehali la sebaka se ka pele sa sebopeho sa mosebelisi.
2. Tsamaisa ho File Ts'ebetso.
3. Tobetsa [Enter] (ü) ho khetha Boloka Configuration.
4. Skrine ea Save Configuration e bonts'a le ea kamehla "Filelebitso: Echo1" e khethiloe. U ka boloka ea hau file tlas'a lebitso pakeng tsa Echo1 le Echo16.
5. Ho khetha e fapaneng filelebitso, tobetsa [Enter] (ü). Khetho e tla shebana le "Echo #".
6. Sebelisa [Holimo] () le [Tlase] () ho tsamaisetsa lenaneng. Tobetsa [Enter] (ü) ho etsa khetho.
7. Tsamaisetsa ho Boloka ho konopo ea USB ebe o tobetsa [Enter] (ü). Moqoqo o tla hlahisa "Saving to USB". The file e tla lula e bolokiloe bukeng ea motso ea sesebelisoa sa USB.

Qala processor hape
Qala hape PCP-Mk2.
Ho latela melao
Bakeng sa litokomane tse felletseng tsa sehlahisoa, ho kenyeletsoa litokomane tsa tumellano, etela etcconnect.com/products.

Corporate Headquarters n Middleton, WI, USA | +1 608 831 4116
Global Offices n London, UK | Roma, IT | Holzkirchen, DE | Paris, FR | Hong Kong | Dubai, UAE | Singapore
New York, NY | Orlando, FL | Los Angeles, CA | Austin, TX
Web etconnect.com 
Tšehetso ts'ehetso.etcconnect.com 
Ikopanye etcconnect.com/contactETC
© 2023 Electronic Theatre Controls, Inc.
Letšoao la khoebo le lintlha tsa patent: etconnect.com/ip
Lintlha tsa sehlahisoa le litlhaloso li ka fetoha. ETC e rerile hore tokomane ena e fanoe ka botlalo. 7123M2300 Rev A E Hlahisitsoe 2023-02

Litokomane / Lisebelisoa

ETC Mk2 Power Control Processor [pdf] Bukana ea Mosebelisi 7123A2216-CFG, 7123B7021, HW7519, HW9444, HW9491, N2026, N2025, I342, HW741, HW701, N4009, N4036, Mk2 Power Control Processor Power, Mk2 Power Control Processor, MkXNUMX Power Control Processor

Litšupiso

• Bukana ea Mosebelisi