ESP32-C3-DevKitM-1 Boto ea Nts'etsopele ea Espressif Systems
Litaelo
Tataiso ena ea basebelisi e tla u thusa ho qala ka ESP32-C3-DevKitM-1 hape e tla fana ka leseli le tebileng. ESP32-C3-DevKitM-1 ke boto ea nts'etsopele ea boemo ba ho kena e thehiloeng ho ESP32-C3-MINI-1, mojule o reheletsoeng ka boholo ba eona bo nyane. Boto ena e kopanya mesebetsi e felletseng ea Wi-Fi le Bluetooth LE.
Bongata ba lithakhisa tsa I/O ho mojule oa ESP32-C3-MINI-1 li robiloe ho lihlooho tsa phini mahlakoreng ka bobeli a boto ena hore li hokahane habonolo. Bahlahisi ba ka hokela li-peripherals ka lithapo tsa jumper kapa ba beha ESP32-C3-DevKitM-1 leboteng la bohobe.
Tokomane e na le likarolo tse latelang tse kholo:
- Rea qala: Fetileview ea ESP32-C3-DevKitM-1 le litaelo tsa ho seta ha hardware/software ho qala.
- Hardware Reference: Lintlha tse qaqileng mabapi le lisebelisoa tsa ESP32-C3-DevKitM-1.
- Lintlha tsa ntlafatso ea Hardware: Nalane ea ntlafatso, litaba tse tsebahalang, le likhokahano tsa litataiso tsa basebelisi bakeng sa liphetolelo tse fetileng (haeba li teng) tsa ESP32-C3-DevKitM-1.
- Litokomane tse Amanang: Lihokelo tsa litokomane tse amanang.
Rea qala
Karolo ena e fana ka kenyelletso e khuts'oane ea ESP32-C3-DevKitM-1, litaelo tsa mokhoa oa ho etsa setup ea lisebelisoa tsa pele le mokhoa oa ho khantša firmware ho eona.
Tlhaloso ea Likarolo
Likarolo tsa bohlokoa tsa boto li hlalositsoe ka tsela e khahlano le oache.
Karolo ea Bohlokoa
| Karolo ea Bohlokoa | Tlhaloso |
| ESP32-C3-MINI- 1 | ESP32-C3-MINI-1 ke mojule oa sepheo se akaretsang sa Wi-Fi le Bluetooth LE combo module o tlang le antenna ea PCB. Motheong oa mojule ona |
| is ESP32-C3FN4, chip e nang le flash e kentsoeng ea 4 MB. Kaha flash e phuthetsoe ka har'a chip ea ESP32-C3FN4, ho e-na le ho kenngoa ka har'a module, ESP32-C3-MINI-1 e na le boholo ba sephutheloana se senyenyane. | |
| 5 V ho 3.3 V LDO | Selaoli sa matla se fetolang phepelo ea 5 V hore e be sephetho sa 3.3 V. |
| 5 V Matla a LED |
E bulela ha matla a USB a hoketsoe botong. |
|
Pina Lihlooho |
Lithakhisa tsohle tse teng tsa GPIO (ntle le bese ea SPI bakeng sa flash) li robehile ho lihlooho tsa phini botong. Bakeng sa lintlha, ka kopo bona Thibelo ea Hlooho. |
|
Konopo ea Boot |
Konopo ea ho jarolla. Ho tshoara fatshe Bootsa ebe o tobetsa Seta bocha e qala mokhoa oa ho jarolla Firmware bakeng sa ho jarolla firmware ka port ea serial. |
|
Boema-kepe ba Micro-USB |
Sehokelo sa USB. Phepelo ea motlakase bakeng sa boto hammoho le khokahano ea puisano lipakeng tsa komporo le chip ea ESP32-C3FN4. |
| Seta Botjha Konopo | Tobetsa konopo ena ho qala sistimi bocha. |
| USB-to-UART
Borokho |
Chip e le 'ngoe ea borokho ea USB-UART e fana ka litefiso tsa phetisetso ho fihla ho 3 Mbps. |
| RGB LED | RGB LED e nang le aterese, e tsamaisoang ke GPIO8. |
Qala Ntlafatso ea Kopo
Pele o matlafatsa ESP32-C3-DevKitM-1 ea hau, ka kopo etsa bonnete ba hore e maemong a matle ha ho na matšoao a hlakileng a tšenyo.
Hlokahala Hardware
- ESP32-C3-DevKitM-1
- Cable ea USB 2.0 (E Tloaelehileng-A ho isa ho Micro-B)
- Khomphutha e sebelisang Windows, Linux, kapa macOS
Hlokomela
Etsa bonnete ba hore o sebelisa thapo e nepahetseng ea USB. Lithapo tse ling ke tsa ho tjhaja feela 'me ha li fane ka lithapo tse hlokahalang tsa data kapa hona ho sebetsa bakeng sa ho hlophisa liboto.
Setup ea Software
Ka kopo tsoela pele ho Qala, moo ho Kenyeletsoa ha Karolo Mohato ka Mohato ho tla u thusa ka potlako ho theha tikoloho ea nts'etsopele ebe o khantša kopo ea ex.ampKena ho ESP32-C3-DevKitM-1 ea hau.
Litaba le Package
Retail Orders
Haeba o laela e le 'ngoe kapa tse' maloa sampLes, ESP32-C3-DevKitM-1 ka 'ngoe e tla ka sephutheloana se le seng ka har'a mokotla oa antistatic kapa sephutheloana sefe kapa sefe ho latela morekisi oa hau. Bakeng sa liodara tsa mabenkele, ka kopo, etela ho https://www.espressif.com/en/company/contact/buy-a-sample.
Litaelo tsa Wholesale
Haeba o laela ka bongata, mapolanka a tla ka mabokose a maholo a li-cardboard. Bakeng sa liodara tse ngata, ka kopo, etela ho https://www.espressif.com/en/contact-us/sales-questions.
Hardware Reference
Setšoantšo se Thibeloang
Setšoantšo sa block se ka tlase se bontša likarolo tsa ESP32-C3-DevKitM-1 le likhokahano tsa tsona. 
Likhetho tsa Phepelo ea Matla
Ho na le mekhoa e meraro e ikhethileng ea ho fana ka matla ho boto:
- Micro-USB Port, phepelo ea kamehla ea matla
- 5V le lihlooho tsa phini tsa GND
- 3V3 le lihlooho tsa phini tsa GND
Ho khothalletsoa ho sebelisa khetho ea pele: Micro-USB Port.
Thibelo ea Hlooho
Litafole tse peli tse ka tlase li fana ka Lebitso le Mosebetsi oa lihlooho tsa phini mahlakoreng ka bobeli a boto (J1 le J3). Mabitso a lihlooho tsa pin a bontšoa ho ESP32-C3-DevKitM-1 - ka pele. Linomoro li tšoana le tsa ESP32-C3-DevKitM-1 Schematic (PDF).
J1
| Che. | Lebitso | Mofuta 1 | Mosebetsi |
| 1 | GND | G | Fatše |
| Che. | Lebitso | Mofuta 1 | Mosebetsi |
| 2 | 3V3 | P | 3.3 V phepelo ea motlakase |
| 3 | 3V3 | P | 3.3 V phepelo ea motlakase |
| 4 | IO2 | I/O/T | GPIO2 2, ADC1_CH2, FSPIQ |
| 5 | IO3 | I/O/T | GPIO3, ADC1_CH3 |
| 6 | GND | G | Fatše |
| 7 | RST | I | CHIP_PU |
| 8 | GND | G | Fatše |
| 9 | IO0 | I/O/T | GPIO0, ADC1_CH0, XTAL_32K_P |
| 10 | IO1 | I/O/T | GPIO1, ADC1_CH1, XTAL_32K_N |
| 11 | IO10 | I/O/T | GPIO10, FSPICS0 |
| 12 | GND | G | Fatše |
| 13 | 5V | P | 5 V phepelo ea motlakase |
| 14 | 5V | P | 5 V phepelo ea motlakase |
| 15 | GND | G | Fatše |
J3
| Che. | Lebitso | Mofuta 1 | Mosebetsi |
| 1 | GND | G | Fatše |
| 2 | TX | I/O/T | GPIO21, U0TXD |
| 3 | RX | I/O/T | GPIO20, U0RXD |
| 4 | GND | G | Fatše |
| 5 | IO9 | I/O/T | GPIO9 2 |
| 6 | IO8 | I/O/T | GPIO8 2, RGB LED |
| Che. | Lebitso | Mofuta 1 | Mosebetsi |
| 7 | GND | G | Fatše |
| 8 | IO7 | I/O/T | GPIO7, FSPID, MTDO |
| 9 | IO6 | I/O/T | GPIO6, FSPICLK, MTCK |
| 10 | IO5 | I/O/T | GPIO5, ADC2_CH0, FSPIWP, MTDI |
| 11 | IO4 | I/O/T | GPIO4, ADC1_CH4, FSPIHD, MMS |
| 12 | GND | G | Fatše |
| 13 | IO18 | I/O/T | GPIO18, USB_D- |
| 14 | IO19 | I/O/T | GPIO19, USB_D+ |
| 15 | GND | G | Fatše |
1(1,2) P: Phepelo ea matla; I: Kenyeletso; O: Sephetho; T: Boipheliso bo phahameng.
2(1,2,3)
GPIO2, GPIO8, le GPIO9 ke likhoele tse tlamang tsa chip ea ESP32-C3FN4. Lithapa tsena li sebelisoa ho laola mesebetsi e mengata ea chip ho latela binary voltagboleng bo sebelisitsoeng ho liphini nakong ea ho matlafatsa chip kapa ho seta sistimi bocha. Bakeng sa tlhaloso le ts'ebeliso ea likhoele tsa likhoele, ka kopo sheba ho Section Strapping Pins ho ESP32-C3 Datasheet.
Sebopeho sa Pin 
Lintlha tsa ntlafatso ea Hardware
Ha ho liphetolelo tse fetileng tse fumanehang.
Litokomane Tse Amanang
- Haha Lisebelisoa tse hoketsoeng tse Sireletsehileng le tse baballang litšenyehelo ka ESP32-C3
- Lethathamo la lintlha tsa ESP32-C3
- Lethathamo la lintlha tsa ESP32-C3-MINI-1 (PDF)
- ESP32-C3-DevKitM-1 Schematic (PDF)
- Moralo oa ESP32-C3-DevKitM-1 PCB (PDF)
- ESP32-C3-DevKitM-1 Litekanyo (PDF)
- Mohloli oa litekanyo tsa ESP32-C3-DevKitM-1 file (DXF) - U ka khona view ka Autodesk Viewke inthaneteng
Litokomane / Lisebelisoa
 |
ESPRESSIF ESP32-C3-DevKitM-1 Development Board Espressif Systems [pdf] Buka ea Taelo ESP32-C3-DevKitM-1, Development Board Espressif Systems, ESP32-C3-DevKitM-1 Development Board Espressif Systems, Board Espressif Systems, Espressif Systems |
