Elitech STC-9200A Taolo ea Mocheso

Sehlahisoa se felileview
STC-9200A ke taolo ea mocheso oa mofuta oa bokahohle. E kenyelletsa likanale tse peli tsa li-sensor tsa mocheso ka nako e telele bakeng sa ho lokisa mocheso oa khabinete le ho laola defrost. E tšehetsa sensor ea defrost, relay ea defrost, relay ea fan le karete ea kopi.

Phanele ea ts'ebetso le pontšo

Tlhaloso
Boholo ba ho kenya: 71 * 29 (mm)
Boholo ba sehlahisoa: 78.5 * 34.5 * 82 (mm)

Litekanyetso tsa tekheniki

1. Sebaka sa ho lekanya mocheso: -50°C~99°C kapa -50°F~ 99°F (Hafeela boleng ba ho lekanya kutlo bo behiloe ho 0.)
2. Tharollo ea mocheso: 0.1°C/°F(sensor ea khabinete), 1'C/°F (sensor evaporator)
3. Ho nepahala ha mocheso: #1 ° C (-40 ° C ~ 50C); +2°C (50'C ~70°C); +3 ° C (ba bang); kapa +2°F (-40°F*99°F); #6°F (tse ling)
4. Sebaka sa taolo ea mocheso: -50°c/°F99°c /°F
5. Phepelo ea matla: 220:10% (VAC). 50/60HZ;
6. Kakaretso ea tšebeliso ea matla: <3w
7. Bokhoni ba tlhahiso:
   Sehatsetsi: 8A/Deft st: 8A/ Fan: 8A
8. Mocheso oa tikoloho: 0°C~55°C
9. Thempereichara ea polokelo: -25°C75°C, mongobo o lekanyelitsoeng: 20%85% (ha o condensing)

Boemo ba sesupo

Sesupo	Letšoao	Boemo	Tlhaloso
Beha	beha	On	Beha liparamente
		E tima	Ho lekanya le ho laola
		Khanya	Sheba boemo ba mocheso
Sehatsetsi		On	Refrigerating matha.
		E tima	Sehatsetsi se emisa.
		Khanya	Ho lieha ho etsa sehatsetsing.
Kheloha		On	Defrosting matha/Rotha e qala.
		E tima	Marotholi a emisa.
		Khanya	Defrost tieho.
Fane		On	Fane qala.
		E tima	Fane ema.
		Khanya	Ho lieha ha fan ho qala ka mor'a ho qhibiliha.
Mocheso oa mocheso	°C	On	°C is e khethiloeng joalo ka mocheso oa hajoale unit.
Mocheso oa mocheso		On	°F ha e eo e khethiloeng e le mocheso oa mocheso oa hona joale.

Lethathamo la paramethara

Lenane	Mosebetsi	Setting range	Ea kamehla
St	Mocheso sete-ntlha	Tlase mocheso set-point ~ Holimo mocheso set-ntlha	-5
Hy	Laola hystersis	o.1~10· c 1~25 l'	2
LS	Mocheso o tlase o beha-ntlha	-5o c ~st -5o l' ~st	-20
US	Mocheso o ka holimo o beha-ntlha	St~ 99 C St~ 99 1′	20
at	Khatello ea sensor ea Kabinete	-9.9~9.9 C -20~20 l'	a
AC	Ho lieha nako ho thibela ho qala khafetsa	o ~ joalo min	3
td	Defrost mode	EL: Motlakase o thibela serame ka hare ho: Mocheso oa khase e chesang	EL
dE	Defrost setopong mocheso	-50~90 c -50~90 l'	10
id	Defrost cycle	0 ~ 99 hora	6
Md	Nako e phahameng ea defrost		30
dF	Pontšo ea "paneli" nakong ea defrosting	rt: Kabinete mocheso eona: Mocheso oa khabinete ha defrost e qala St: Mocheso sete-ntlha dF: df	rt
dt	Nako ea ho rotha ka mor'a ho qhibiliha	0~99 mets 0: E holofetse
FC	Mokhoa o sebetsang oa fan	Cn: Fan e qala le ho emisa ka nako e le 'ngoe le sehatsetsing,' me e emisa nakong ea ho qhibiliha. on: Fane e lula e matha, 'me e ema nakong ea serame. Cy: Fan e qala le ho emisa ka nako e le 'ngoe le sehatsetsi,' me e matha nakong ea ho qhibiliha. oy: Fan e ntse e matha.	Cn
FS	Mocheso oa ho emisa fan	- hoo ~90 c	QC
AU	Moeli o kaholimo oa alamo	(AL+1)~99· c (AL+1)~99 l'	99
AL	Tlase alamo moeli	-50 C~(AU-1) -50 l' ~(AU-1)	-50
Ad	Alamo e lieha	0~99 mets	15

Hlokomela

1. Kamora ho fetoha ha Celsius/Fahrenheit, mosebelisi o hloka ho lokisa boleng ba lintho tse ling tse amanang le paramethara ho netefatsa hore tlhophiso e nepahetse.
2. Mekhahlelo ea kamehla bukeng ea tataiso e ka fetoha ntle le tsebiso.

Likonopo

Mabitso a konopo le mesebetsi

Konopo	Mosebetsi	Ketso	Sesupo
Beha	View mocheso set-ntlha	Tobetsa ebe o lokolla	set ke Flash.
	Fetola boemo ba mocheso	Tobetsa o hatelle metsotsoana e 2	set is on.
	Boloka boemo ba mocheso 'me u tsoe ho seta	E tobetse mme molaoli a arabe.	sete se tima.
	Fetolela pakeng tsa ntho ea parametha le boleng boemong ba boemo ba tlhophiso	E tobetse mme molaoli a arabe.	set is on.
Beha +	Kenya li-setting tsa parameter	Tobetsa o hatelle metsotsoana e 3	set is on.
Beha +	Tloha ho li-setting tsa parameter	E tobetse mme molaoli a arabe.	sete se tima.
	Khutlisa parameter	Tobetsa o hatelle metsotsoana e 3	Haeba c e atleha, phanele e tla hlahisa "pele"
	View ntho e fetileng ea parametha kapa ho fokotsa boleng ba parametha	E tobetse mme molaoli a arabe.	set is on.
	Kenya li-parameter ho karete ea kopi	Tobetsa o hatelle metsotsoana e 1	Haeba e atleha, phanele e bonts'a "UP"; haeba e hloleha, phanele e bonts'a "Er";
	View ntho e latelang ea parameter kapa eketsa boleng ba parameter	E tobetse mme molaoli a arabe.	set is on.
	Khoasolla likarolo ho tsoa kareteng ea kopi	Tobetsa o hatelle metsotsoana e 1	Haeba e atleha, phanele e bonts'a "etsa"; haeba e hloleha, phanele e bonts'a "Er"; haeba parameter ea karete ea kopi e sa lumellane le mohlala oa molaoli, phanele e bonts'a "EP".
	View mocheso oa sensor ea evaporator	E tobetse mme molaoli a arabe.	Phanele e bonts'a mocheso oa mouoane
	Qala defrost ka letsoho	Tobetsa o hatelle metsotsoana e 2	e ntse e tsoela pele.

Ts'ebetso ea likonopo

View Sebaka sa mocheso oa mocheso:
Tobetsa ebe o lokolla konopo ea Seta, phanele e bonts'a sebaka sa ho seta mocheso le mabone a setang.
Tobetsa Seta kapa u eme metsotsoana e 15 ntle le ho tobetsa konopo efe kapa efe ho khutlela ponts'ong e tloaelehileng.

Fetola sebaka sa mocheso:
Tobetsa o hatelle Seta konopo ea metsotsoana e 2, phanele e bonts'a sebaka sa mocheso le mabone a seta.

Tobetsa or ho fetola sebaka se behiloeng ka metsotsoana e 15.
Tobetsa Seta kapa ema metsotsoana e 15 ntle le ho tobetsa konopo ho boloka ntlha e ncha.

Fetola boleng ba paramethara:
Fetola paramethara ea mosebelisi (lera 1 Pr1)

Tobetsa o hatelle Seta le Metsotsoana e 3 ho kenya lenane la mosebelisi, sesupo se beha mabone.
Khetha ntho ea parameter ebe o tobetsa Seta hape ho hlahisa boleng ba eona.
Tobetsa or ho fetola boleng
Tobetsa Seta ho netefatsa boleng le ho hlahisa ntho e latelang ea parametha.
Tobetsa Seta le kapa ema metsotsoana e 15 ntle le ho tobetsa konopo efe kapa efe ho boloka boleng bo bocha le ho tsoa.

Fetola paramethara e patiloeng (lera 2 Pr2)
(Ka lera le patiloeng, lintho tsohle tsa parameter li ka ba viewed (Pr1, Pr2).

Tobetsa o hatelle Seta le Metsotsoana e 3 ho kenya menu, lera la mosebelisi, lebone le sete mabone.
Tobetsa o hatelle Seta le Metsotsoana e 7, phanele e bonts'a L2; lokolla likonopo tse peli, e bontša Hy, e bontšang ho kena lera patiloeng.

Khetha ntho ea parameter ebe o tobetsa Seta hape ho hlahisa boleng ba eona.

Tobetsa or ho fetola boleng.
Tobetsa Seta ho netefatsa boleng le ho hlahisa ntho e latelang ea parametha.
Tobetsa Seta le kapa ema metsotsoana e 15 ntle le ho tobetsa konopo efe kapa efe ho boloka boleng bo bocha le ho tsoa.

Hlokomela: Haeba ho se na ntho ea parameter ho Pr1, phanele e tla bontša "nP" ka mor'a ho kenya Pr1; tobetsa o hatelle Seta le ho fihlela 12 e hlahisoa ho kenya Pr2.
Tsamaisa ntho ea parametha ho tloha ho Pr2 ho ea ho Pr1 (ke hore, motsamao oa morao)

Ho Pr2, tobetsa Seta le ho tsamaisa ntho ea parameter lipakeng tsa Pr2 le Pr1.
Ts'ebetsong ea motsamao, ntlha ea decimal ea tima ho bonts'a hore ntho ea paramethara e isitsoe ho Pr1, 'me mabone a ntlha ea decimal ho bontša ntho ea paramethara e bonahala feela ho Pr2.

Notlela/ notlolla likonopo

Tobetsa o hatelle le ho feta metsotsoana e 3, phanele e bonts'a "oF" 'me likonopo li notletsoe. Liparamente ha li khone ho fetoloa, defrost e ke ke ea qala kapa ea emisoa ka letsoho.
Tobetsa o hatelle le ho feta metsotsoana e 3, phanele e bonts'a "ho" 'me likonopo lia notleloa.

Reset parameter
Tobetsa o hatelle sete le ho feta metsotsoana e 3, phanele e bonts'a "pele", e bonts'ang katleho ea parameter e atlehileng. Paramethara e 'ngoe le e' ngoe e khutlisetsoa boleng bo jarollotsoeng ho molaoli ka karete ea kopi.
Defrost ka letsoho
Boemong ba ho se-setting, tobetsa  ho view mocheso oa hajoale o lekantsoeng ka sensor ea evaporator (ha sensor ea evaporator e nolofalitsoe ebile e tloaelehile). Tobetsa o hatelle Metsotsoana e 2 ho qobella defrost ho qala.

Karete ea kopo
Kenya (kopitsa liparamente ho molaoli ho kopitsa karete)
Sebelisa likonopo ho beha liparamente.

Kenya karete ea kopi, tobetsa ho fihlela phanele e bonts'a "holimo"
Tlosa karete ea kopi ka mor'a metsotsoana e 3 ebe u kenya matla ho molaoli hape.
Khoasolla (kopitsa liparamente tse kareteng ea kopi ho molaoli)
Kenya karete ea kopi, tobetsa ho fihlela phanele e bonts'a "etsa".
Tlosa karete ea kopi le matla ho molaoli hape kamora metsotsoana e 3.

Hlokomela: Pontšo ea "Er" e bontša ho hlōleha ha lenaneo. Sheba hore na karete ea kopi e hokahane 'me u phete ts'ebetso e ka holimo.
Pontšo ea "EP" e bonts'a hore data e kareteng ea kopi ha e lumellane le mohlala oa molaoli mme lenaneo le hloleha. Ka kopo sebelisa karete e nepahetseng ea kopi kapa kenya lintlha kareteng ea kopi hape. Ebe u pheta ts'ebetso e ka holimo.
(*Ka kopo boloka motlakase o tsitsitseng le khokahanyo e sebetsang ea karete ea kopi ha o ntse o sebetsa. Se ke oa tlosa karete ea kopi pele o qeta ts'ebetso ka botlalo.)

Laola tlhahiso

Sehatsetsi:

Boemong bo tloaelehileng:
Sehatsetsi se qala ha mocheso oa khabinete > boemo ba mocheso + control hystersis (Hy), le ho lieha nako ho thibela ho qala khafetsa (AC) ho feta.
Sehatsetsi se emisa ha mocheso oa khabinete o sete-ntlha.
Sehatsetsi se qala ha molaoli a matlafatsoa ka lekhetlo la pele, ho lieha ho hlahisoa ka mor'a hore o matlafatsoe (od) ho feta, mocheso oa khabinete> mocheso o behiloeng-ntlha + Hy.

Haeba ho na le phoso ea sensor ea khabinete:
Sehatsetsi / futhumatsang e tsamaea ka potoloho ho latela nako e behiloeng ea ho qala le ho emisa. Moo,

• Ha Cy=0 le Cn=0, sehatsetsi sea emisa.
• Ha Cy=0 le Cn#0, sehatsetsi se emisa.
• Ha Cn=0 le Cy#0, sehatsetsi se qala.

Hlakola:

1. id=0, defrost e koetsoe.
2. id#0, eseng maemong a defrost:
   1. Ha sensor ea evaporator e lumelloa (P2=y), 'me mocheso oa sensor ea evaporator > defrost stop thempereichara (dE), defrost e ke ke ea qala.
   2. Ha sensor ea evaporator e lumelletsoe (P2=y), 'me mocheso oa sensor ea evaporator < defrost stop stop (dE), kapa evaporator sensor e holofetse (P2=n), defrost e qala tlasa maemo afe kapa afe a latelang:
      a. Ha defrost cycle (id) e feta, defrost e qala.
      b. Tobetsa metsotsoana e 2 ho qala ho defrosting.
      Defrost delay (dd) e feta, defrost outputs.
3. Nakong ea defrosting (defrost e emisa tlas'a e 'ngoe ea maemo a latelang):
   P2=y, le thempereichara ea sensor ea mouoane > mocheso oa defrost stop (dE), defrost stops.
   Ha nako ea Max defrost (Md) e feta, defrost ea emisa.
4. E qala ho rotha ka mor'a ho qhibiliha. Sehatsetsi se koalehile ka nako ea ho rotha (dt), nakong eo marotholi a hlahisoang ke defrost a tsoang. Ka mor'a hore nako ea ho rotha e fete, sehatsetsi se potoloha.

Hlokomela: Ka ts'ebetso ea defrost, phanele e bonts'a:

• dF=rt: Mocheso oa khabinete
• dF-it: Mocheso oa khabinete ha defrost e qala
• dF=St: Sebaka sa boemo ba mocheso
• dF=dF: dF

Defrost mode   Boemo ba tsamaiso	Setsi sa ho futhumatsa ka motlakase	Defrost e chesang ea khase
Liphetho tsa sehatsetsing.	Compressor e butswe.	Compresser e butswe.
	Ho futhumatsa motlakase ke tima.	Balofo ea litsela tse 'nè ke tima.
Defrost tieho.	Compressor ke eona tima.	Compressor ke eona tima.
	Ho futhumatsa motlakase ke tima.	Ho butsoe valve ea litsela tse 'nè.
Liphetho tsa defrost.	Compressor ke eona tima.	Compresser e butswe.
	Ho futhumatsa motlakase ho butsoitse.	Ho butsoe valve ea litsela tse 'nè.
Rotha ka mor'a ho qhibiliha.	Compressor ke eona tima.	Compressor ke eona tima.
	Ho futhumatsa motlakase ke tima.	Ho butsoe valve ea litsela tse 'nè.

Fane

Mokhoa o sebetsang oa fan:

• FC=cn: Fane e qala ebe e ema ka nako e le 'ngoe le sehatsetsing, ebe e ema nakong ea serame.
• FC=on: Fane e lula e matha, 'me e ema nakong ea serame.
• FC=cy: Fan e qala le ho ema ka nako e le 'ngoe le sehatsetsi,' me e matha nakong ea ho qhibiliha.
• FC=oy: Feti e ntse e matha.
  Ha FC=cn kapa on, fan e ka matha hape kamora hore fan e qale ho lieha ka mor'a hore defrost (Fd) e fete.
  Haeba P2=y le mocheso oa sensor ea mouoane > mocheso oa ho emisa fan (FS), fan ea emisa.

Alamo ea phoso
Phanele e bonts'a "P1" kapa "P2" haeba ho na le phoso ea sensor. Ka mor'a hore phoso e tlosoe, alamo e tla tsosolosa ka bo eona.

Alamo ea moeli oa mocheso oa khabinete:
Ha mocheso oa khabinete> moeli o ka holimo oa alamo (AU), ho lieha ha alamo (Ad) le ho lieha ha alamo ka mor'a ho qala (dA), phanele e tla bontša HA; ha mocheso oa khabinete <AU, alamo e tla tlosoa.
Ha mocheso oa khabinete <moeli o tlase oa alamo (AL), Ad le dA e feta, phanele e tla bonts'a LA; ha mocheso oa khabinete > AL, alamo e tla tlosoa.

Khoutu	Lebaka	Boemo ba ho tsoa
Pl	Phoso ea sensor ea Kabinete	Compressor mathas ka liparamente “Cy 11   and “Cn11 •
P2	Phoso ea sensor ea evaporator	Defrost e tsamaisana le liparamente "id" le "Md".
HA	Alamo e phahameng ea mocheso oa khabinete	Sephetho ha se fetohe.
LA	Alamo e tlase ea mocheso oa khabinete	Sephetho ha se fetohe.
nP	Sensor ea evaporator e holofetse, empa boleng ba mocheso o lekantsoeng oa sensor ea evaporator e khethiloe ho bonts'a.	Sephetho ha se fetohe.
Er	Ho hloleha ha lenaneo la karete ea kopi	Sephetho ha se fetohe.
Ep	Lintlha tse ka kareteng ea kopi ha li lumellane le mohlala oa molaoli, kahoo lenaneo le hloleha.
pele	E atlehile ho seta bocha

Melao ea polokeho

Kotsi:

1. Etsa phapang pakeng tsa likou tsa sensor lead, mohala oa motlakase le li-relay. Ke kopa o seke oa hokahanya mela e fosahetseng. Relay e ke ke ea tlala haholo.
2. Wiring e hloka ho khaoloa ha phepelo ea motlakase pele.

Tlhokomeliso:
Selaoli se thibetsoe ho sebelisoa metsing kapa tikolohong e mongobo haholo, mocheso o phahameng, tšitiso e matla ea motlakase kapa tikoloho e matla ea kutu.

Tlhokomeliso:

1. Matla voltage tlameha ho tsamaellana le voltage ngotsoe ho molaoli. Ka kopo netefatsa botsitso ba matla a voltage.
2. Sisinya ho boloka sebaka se loketseng pakeng tsa sensor lead le mohala oa motlakase ho qoba tšitiso e ka bang teng.
3. Ha u kenya sensor ea evaporator, sensor e lokela ho behoa haufi le pipe ea koporo 5 cm ho ea ho evaporator inlet.
   Ka kopo etsa bonnete ba hore sensor e lula e hokahane hantle le phala ea koporo.
4. Tlosa sensor ka ho hokela pheletso ea eona hanyane ho ea tlase.

Litokomane / Lisebelisoa

Elitech STC-9200A Taolo ea Mocheso [pdf] Bukana ea Mosebelisi STC-9200A Temperature Controller, STC-9200A, STC-9200A Controller, Molaoli oa Mocheso, Mookameli

Litšupiso

• Bukana ea Mosebelisi