Elitech RCW-360 Temperature le Humidity Data Logger
Litaelo tsa Tšebeliso ea Sehlahisoa
- The product offers features such as real-time monitoring, alarm functions, data recording, and a large screen display.
- Refer to the provided figure for the different components of the product interface.
- The product model is RCW-Pro. Choose probe models based on the required specifications as listed in the table.
- Tobetsa konopo ea Menu ho view maximum and minimum values in the recorded data.
- Access the Record and Upload Interval page to adjust settings through the APP.
- Sheba lintlha tsa sesebelisoa ka ho tobetsa konopo ea Menu ho view lintlha tse kang mohlala, mofuta oa sensor, GUID, IMEI, joalo-joalo.
- Follow instructions in the Elitech iCold manual to add devices to the platform using the APP or WEB moreki.
FEELAVIEW
- This product is a wireless Internet of Things monitor, providing such functions as real-time monitoring, alarm, data recording, data uploading, large screen display, etc. of temperature and humidity at monitoring points.
- Together with the “Elitech iCold” platform and APP, it can realize functions such as remote data viewing, historical data query, remote alarm push, etc.
- It is widely used in food, medicine, catering, international warehousing and logistics industries.
Likaroloana
- Sehlahisoa se loketse liketsahalo tse fapa-fapaneng, ho kenyeletsa ntlo ea polokelo, polokelo ea sehatsetsing, koloi ea sehatsetsing, khabinete ea moriti, khabinete ea meriana, lab ea sehatsetsing, joalo-joalo;
- Compact size, fashionable appearance, magnetic card tray design, and easy installation.
- Pontšo e kholo ea skrine ea mebala ea TFT, e nang le litaba tse ngata;
- Betri ea lithium e kentsoeng ka hare ho eona e nolofalletsa ho kenya data ea nako e telele ka mor'a ho khaola matla;
- Built-in sound-light alarm device can realize a local alarm.
- Skrine ea ho iketsa / tima;
- E ts'ehetsa liteishene tse fihlang ho tse 2, mocha ka mong o ts'ehetsa mefuta e fapaneng ea li-probe, mefuta ea lipatlisiso e bona lenane la khetho.
Sehokedi
| (1) External probe 1 | (2) Konopo ea ho tima/ho tima | (3) Magnetic card tray |
| (4) SIM card interface(4G Version) | (5) Khokahano ea ho tjhaja | (6) External Probe 1 Interface |
| (7) Letšoao la ho tjhaja | (8) Alarm status indicator | (9) Skrine |
| (10) External probe 2 | (11) “Menu” button | (12) External Probe 2 Interface |
Lethathamo la Khetho ea Mehlala
Collection Host: RCW-360Pro.
Malebela: The specific host model is subject to the actual product.
Probe model: The conventional probe models are shown in the table below:
| Mofuta oa probe | Single temperature | Mocheso o habeli | Mocheso oa botlolo ea gel | Mocheso le mongobo | Mocheso o tlase haholo | Low Concentration CO2 | High Concentration CO2 |
| Mohlala | TD3X-TE-R | TD3X-TDE-R | TD3X-TE(GLE)-R | TD3X-THE-R | PT100IIC-TLE-R | SCD4X-CO2E | STC3X-CO2E |
| Cable | 5 metres | 5 metres | 5 metres | 5 metres | 3 metres | 2 metres | 2 metres |
| Ntlha | One temperature probe | Two temperature probes | One temperature probe | 1 temperature probe and 1 humidity probe | One temperature probe | CO2 Concentration | CO2 Concentration |
| Range | -40 ~ 0°C | T: -40~ 0°C H: 0~100 %RH | -200 ~ 150°C | 400 ~ 5000 ppm | 0~100 vol% | ||
| Ho nepahala | ±0.5°C | T: ±0.5°C, H: ±5%RH | ±0.5°C(-40~ 0°C)
±1°C(- 0~100°C) ±2°C(Others) |
±(100+5% reading) | ±(1+3% reading) | ||
| Mofuta oa sensor | Digital temperature and humidity sensor, Digital temperature sensor | Analog to digital sensor | Sensor ea carbon dioxide | ||||
| Sensor interface | 3.5mm four-section headphone interface, using I2C communication mode | ||||||
Hlokomela:
- The specific sensor type is subject to the actual product.
- Moamoheli ha a tle ka mokhoa o tloaelehileng le li-probes. Ka kopo khetha li-probe ho latela litlhoko tsa 'nete,' me mocha ka mong o ka ikamahanya le mefuta e kaholimo ea li-probes.
Tekheniki Parameters
- Kenyelletso ea matla: 5V/2A (DC), Mofuta oa C.
- Temperature display resolution: 0.1 oc.
- Humidity display resolution: 0.10/0RH.
- Palo ea lihlopha tsa ho rekota ntle le inthanete: 100,000.
- Mokhoa oa polokelo ea data: polokelo ea selikalikoe.
- Rekota, nako ea ho kenya, le nako ea alamo:
- Normal recording interval: 1 minute, 24 hours allowed, Default 5 minutes.
- Alarm recording interval: 1 minute, 24 hours allowed, Default 2 minutes.
- Normal upload interval: 1 minute, 24 hours allowed, Default 5 minutes.
- Alarm upload interval: 1 minute, 24 hours allowed, Default 2 minutes.
- Bophelo ba betri:
- Not less than 10 days (@250°C, good network < environment, upload interval:5 minutes)
- Not less than 60 days (@250°C, good network environment, upload interval:30 minutes)
- Leseli la sesupo: sesupo sa alamo, sesupo sa ho tjhaja.
- Skrine: Skrine sa mebala ea TFT.
- Likonopo: tima / tima, menu.
- Alarm buzzer: alamo ea etsahala, e lla motsotso o le mong.
- Communication: 4G(can fall back to 2G), WlFl.
- Mokhoa oa sebaka: LBS + GPS (ka boikhethelo).
- Mefuta ea alamo: alamo ea lehae le alamo ea leru.
- Boemo bo sa keneleng metsi: IP64.
- Working environment: -20-60 oc, 0-900/0 RH (non-condensing).
- Tlhaloso le boholo: 110x70x23mm.
Litaelo tsa Ts'ebetso
Ho kenya le ho tlosa probe
- Turn off the device and securely install the sensor in the headphone connector.
- To removing the sensor, please turn it off first and then unplug the sensor.
Ho tjhaja
- Hokela ho adaptara ea motlakase ka thapo ea USB.
- When charging, the charging indicator flashes; when it is fully charged, the charging indicator is always on.
Matla a ho bulela/ tima
- Press and hold the on/off button for 3 seconds to turn on or off the device.
- Start recording data according to the recording interval after turning on, and report data according to the upload interval.
- Stop recording after turning off.
Lintlha tsa nako ea sebele
- Letšoao la lets'oao la marang-rang: Hokela seteisheneng 'me u hlahise letšoao la lets'oao. Haeba marang-rang a sesebelisoa a sa tloaeleha, "X" e tla hlahisoa hukung e kaholimo ho le letšehali la lets'oao.
- Boitsebiso ba mocha: E emetsoe ke CH1 kapa CH2, e bontšang data ea probe e lumellanang le mocha oa 1 kapa 2 bakeng sa lintlha tsa morao-rao.
- Real-time temperature or humidity: Supports °C or °F display. If the platform turns off the probe, the corresponding position will display “OFF”.
- Meeli ea alamo e kaholimo le e tlase: Lintlha tse ka tlase ho moeli o tlase li tla hlahisoa ka boputsoa, 'me data e kaholimo ho moeli o kaholimo e tla hlahisoa ka bofubelu.
- Palo ea data e sa kengoang: E bonts'a palo ea data e rekotiloeng empa e sa kengoa.
- Battery icon: Four-bar battery indicator. When charging, the battery indicator flashes and remains on when fully charged. When the battery level is below 20°/°, it is displayed in red.
- Nako le letsatsi
When both channels are connected with probes, the CH1 and CH2 channel data automatically switch display within 10 10-second cycle.
Boholo le Bonyane
- Short-press the “Menu” key to enter the “Maximum and Minimum” page, as shown in the following figure.
- Count the maximum and minimum values in the recorded data. CH1A and CH1B represent the two collected values of channel 1 or 2, corresponding to sensor shutdown or single temperature probe. The B data displays “-~-“.
Viewho boloka lirekoto le linako tsa ho kenya
- Short-press the “Menu” button to enter the “Record and Upload Interval” page, as shown in the following figure, which can be set through the APP.
View lintlha tsa sesebelisoa
- Press the “Menu” button to enter the “Device Information” page, as shown in the following figure.
- You can query the model, Sensor, version, GUID, IMEI, SIM card ICCID(only for Wi-Fi version)
Ho eketsa lisebelisoa sethaleng le lits'ebetso tsa mantlha
- Adding devices to the platform and operation, please refer to “IV Elitech iCold”.
Elitech iCoId
- The Elitech iCold Cloud platform supports two methods for adding and managing devices:
- APP kapa WEB client. The following mainly introduces the APP method. The WEB moreki a ka kena ho new.i-elitech.com bakeng sa ts'ebetso.
Khoasolla le ho kenya APP
- Ka kopo, hlahloba khoutu ea QR e sekoahelong sa bukana kapa u batle Elitech iCold APP Store kapa Google Play ho khoasolla Elitech App.
Ngoliso ea ak'haonte le Keno ea APP
- Open the APP, in the login page, as shown in Figure 1, follow the prompts, enter the verification information, and click “Login”. After entering the APP, select “
”.
PS:
- If you not have an account, please click on “Register” in the login page, as shown in Figure 2, follow the prompts, and enter verification information to complete account registration.
- If you forget the password, click “Forget password” to find the password as shown in Figure 3. According to the prompts to finish verification and find out the password.
Kenya Sesebelisoa
- Tobetsa “
” hukung e kaholimo ho le letona - Tobetsa “
” in the upper right corner, scan the QR code or enter the GUID back on the device, then fill in the device name and choose time zone. - Tobetsa “
”, the device is added.
Keletso: If the device shows one after being added to the platform, first check the network icon and offline records on the device. If everything is normal, please wait for a few minutes or restart the device before turning it on. The device uploads data according to the set reporting cycle. If the device is offline for a long time, please check if the SIM card is overdue. Ultimately unable to resolve, please call the service hotline for consultation.
Marang-rang a kabo ea WIFI(mofuta oa WIFI feela)
- Tobetsa konopo ea "Menu" hakhutšoanyane ho kenya leqephe la "Lintlha tsa sesebelisoa".
- Press and hold the “Menu” key, and a Bluetooth icon”
“e tla hlaha hukung e kaholimo ho le letšehali ea sesebelisoa - Use the app to distribute the network with this device via Bluetooth, as shown in the following figures ① ~ ③
Lokisa mofuta oa probe
- When using the device for the first time or changing the probe type, it is necessary to reconfigure the probe, as shown in Figure 4 and Figure 5 for operation.
Mokhoa oa ts'ebetso: Log in to the APP →select the device to be changed →select “Parameter Configuration” →select “User Parameters” →select the corresponding probe model based on the actual selected probe type and channel →click “SET”.
Hlokomela:
- After reconfiguring the probe type, it is necessary to wait for an upload cycle to synchronize the probe type to the device, or the device can be restarted to synchronize immediately.
- Tlosa probe. Ka lebaka la phapang ea nako pakeng tsa ho fetola probe le ho e hlophisa, ho ka 'na ha e-ba le boitsebiso bo fosahetseng lethathamong la lintlha.
Tsamaiso ea lisebelisoa
- Click on the device on the main page of the APP to enter the device management related page.
- U ka khona view lintlha tsa sesebelisoa, fetola mabitso a sesebelisoa, view lethathamo la data, beha meeli ea alamo e holimo le e tlase, nako ea ho rekota / ho kenya, lokisa push push, view maps, export reports, and perform other operations.
Elitech iCold Platform
- Bakeng sa mesebetsi e meng, ka kopo kena ho Elitech iCold Platform: new.i-elitech.com.
Phahamiso
- Free data & advanced platform service will be activated after the device is first registered to the Elitech platform.
- After the probation period, customers need to recharge the device by referring to the operation manual.
Elitech iCold Platform: new.i-elitech.com
LBH
- P: Ke li-sensor tsa mofuta ofe tse ka sebelisoang ka leihlo la RCW-Pro?
- A: The monitor supports various sensors, including digital temperature and humidity sensors, analog-to-digital sensors, and carbon dioxide sensors.
- P: Nka fetola linako tsa ho rekota joang?
- A: You can adjust normal recording, alarm recording, normal upload, and alarm upload intervals through the settings on the device or via the APP.
Litokomane / Lisebelisoa
 |
Elitech RCW-360 Temperature le Humidity Data Logger [pdf] Bukana ea Mosebelisi RCW- Pro, TD X-TE-R, TD X-TDE-R, TD X-TE GLE -R, TD X-THE-R, PT IIC-TLE-R, SCD X-CO E, STC X-CO E, RCW-360 Temperature le Humidity Data Logger, RCW-360, Temperature le Humidity Data Logger, Humidity Data Logger, Humidity Data Logger |