Bukana ea Mosebelisi ea Boto ea Ntlafatso ea Electrobes ESP32-S3

Boto ea Ntlafatso ea ESP32-S3

Lintlha tsa Sehlahisoa:

Litlhaloso:

• Lebitso la Sehlahisoa: Boto ea Ntlafatso ea ESP32
• Moetsi: Espressif Systems
• Tšebelisano: Arduino IDE
• Khokahano e se nang mohala: WiFi

Litaelo tsa Tšebeliso ea Sehlahisoa:

1. Khoasolla Software le Development Board:

Ho sebelisa boto ea ntlafatso ea ESP32, latela mehato ena:

1. Khoasolla software ea Arduino IDE ho tsoa ho semmuso websebaka:
   Arduino IDE
   Khoasolla
2. Bula software ea Arduino IDE.

2. Eketsa Tikoloho ea Ntlafatso ea ESP32:

Ho kenyelletsa tikoloho ea ntlafatso ea ESP32 ho Arduino IDE:

1. Bula Arduino IDE 'me u ee ho File -> Likhetho (konopo ea tsela e khuts'oane
   'Ctrl+,').
2. Beha aterese ea JSON
   'https://dl.espressif.com/dl/package_esp32_index.json' ho kena
   Motsamaisi oa Boto ea Tlatsetso URLs tšimo.
3. Tobetsa 'Ho lokile' 'me u khutlele leqepheng la lehae la Arduino IDE.
4. Ho Motsamaisi oa Boto ea Nts'etsopele, batla ESP32 'me u kenye
   tikoloho ya ntshetsopele.

3. Kgetha Boemakepe le ho Kenya:

Ho khetha boema-kepe le ho kenya khoutu ho nts'etsopele ea ESP32
boto:

1. Ka bouena kenya mokhoa oa ho jarolla ka ho tobetsa le ho tšoara BOOT kapa
   ho latela mokhoa o boletsoeng bakeng sa ESP32C3.
2. Tobetsa 'Laola' ho Arduino IDE 'me u emetse hore download e fihle
   felletse.

Ha e se e kentsoe, mabone a RGB mojuleng a tla khanya ka mokhoa o tloaelehileng,
e bonts'a lenaneo le atlehileng, mme khokahano ea WiFi e tla ba
thehiloe.

Lipotso Tse Botsoang Khafetsa (FAQ):

P: Ke tseba joang haeba module ea ESP32 e atlehile
e hlophisitsoeng?

A: Ha lenaneo le atlehile, RGB e khantša mojule
e tla benya ka mokhoa o tloaelehileng, 'me khokahano ea WiFi e tla thehoa.

P: Na nka sebelisa libaka tse ling tsa ntlafatso ka ESP32
boto?

A: Boto ea ESP32 e etselitsoe ho sebelisoa le Arduino
IDE bakeng sa ts'ebetso e nepahetseng le tšebelisano.

litaelo:

1. Khoasolla software le boto ea nts'etsopele

Re sebelisa li-module ho Arduino IDE (e ka khoasolloang ho tsoa ho semmuso websaete)

https://www.arduino.cc/en/Main/Software Using the development environment as an example

ho bontša tšebeliso ea li-module.

Bula software ea Arduino IDE

Sehokelo se latelang sea hlaha

2. Eketsa tikoloho ea ntlafatso ea ESP32 tikoloho ea ntlafatso ea ESP32 eketsa tsela Ho Arduino IDE, bula File -> Likhetho (konopo e khuts'oane ea 'Ctrl+,'). support https://dl.espressif.com/dl/package_esp32_index.json Beha aterese ea JSON ea boto ena ea nts'etsopele ka har'a sehokelo websebaka sa mookameli oa boto ea nts'etsopele. Tobetsa 'Ho lokile' (phetolelo e ncha e 'OK'). Tobetsa 'Ho lokile' hape (mofuta o mocha o 'OK') ho khutlela leqepheng la lehae la Arduino IDE.

Tobetsa ho Mookameli oa Boto ea Nts'etsopele, ho hlaha fensetere ea Mookameli oa Boto ea Nts'etsopele, batla ESP32, 'me u kenye tikoloho ea ntlafatso
Tse kentsoeng li ka sebelisoa ka kotloloho. Ka mor'a ho kenya ts'ebetsong, ho ka bonoa ka boto ea nts'etsopele hore tšehetso e ngata ea li-module tsa ESP32 e kenyelitsoe.

Khetha mofuta o ts'oanang oa boto ea boema-kepe le boto ea nts'etsopele Kena ka letsoho mokhoa oa ho jarolla: Mokhoa oa 1: Tobetsa 'me u tšoare BOOT ho bula. Mokhoa oa 2: Tšoara konopo ea BOOT ho ESP32C3, ebe o tobetsa konopo ea RESET, lokolla konopo ea RESET, ebe o lokolla konopo ea BOOT. Mothating ona, ESP32C3 e tla kenya mokhoa oa ho jarolla.
Tobetsa upload ebe o emela hore download e phethehe. Mabone a RGB mojuleng a tla benya ka mokhoa o tloaelehileng mme khokahano ea WiFi e tla thehoa.

Litokomane / Lisebelisoa

Boto ea Ntlafatso ea ESP32-S3 ea Electrobes [pdf] Bukana ea Mosebelisi ESP32-S3, ESP32-C3, ESP32-H2, ESP32-C6, ESP32-S3 Boto ea Ntlafatso, ESP32-S3, Boto ea Ntlafatso, Boto

Litšupiso

• Bukana ea Mosebelisi