ED-MONITOR-116C
Bukana ea Mosebelisi
by EDA Technology Co., Ltd
built: 2025-08-01
1 Hardware Manual
Khaolo ena e hlahisa sehlahisoa ho fetaview, lenane la ho paka, chebahalo, likonopo, li-india, le lihokelo.
1.1 Ho fetaview
ED-MONITOR-116C ke mochine oa ho ama liindasteri tsa 11.6-inch tse nang le qeto ea skrine ea 1920 × 1080, khanya e phahameng ea 450 cd/m², le "multi-touch capacitive touch screen". E kenyelletsa sebopeho se le seng se tloaelehileng sa HDMI, boema-kepe ba USB ba Mofuta oa C, segokanyimmediamentsi sa DC Jack se le seng, le jack e le 'ngoe ea audio ea 3.5mm, e etsa hore e sebelisane le li-PC tse fapaneng tsa sepheo se akaretsang. Lebone la morao-rao le molumo li ka fetoloa ka li-buttons le software, 'me li sebelisoa haholo-holo lits'ebetsong tsa taolo ea indasteri.
- Khokahano ea HDMI e lumella khokahano e tobileng ho phallo ea HDMI ea moamoheli oa PC.
- Boema-kepe ba USB ba Type-C bo fetisetsa matšoao a skrineng sa ho ama.
- Jack ea molumo oa 3.5mm e tšehetsa khokahanyo ea li-headphone.
- Sesebelisoa sa matla sa DC Jack se tšehetsa 12V ~ 24V DC ho kenya letsoho.
1.2 Lenane la ho Paka
- 1 x ED-MONITOR-116C Monitor
- 1 x Mounting Kit (ho kenyeletsoa 4x buckles, 4xM4 * 10 screws le 4xM4 * 16 screws)
1.3 Ponahalo
Karolo ena e hlahisa mesebetsi le litlhaloso tsa likhokahano ho phanele ka 'ngoe.
1.3.1 Panel e ka pele
Ho hlahisa mefuta le litlhaloso tsa li-interfaces karolong e ka pele.
| NO. | Tlhaloso |
| 1 | 1 × LCD skrine, 11.6-inch touch screen e nang le qeto ea 1920 × 1080, multi-touch capacitive touch screen. |
1.3.2 Phanele e ka morao
Ho hlahisa mefuta le litlhaloso tsa li-interfaces karolong e ka morao.
| NO. | Tlhaloso |
| 1 | 4 x likoti tsa ho kenya tsa snap, tse sebelisetsoang ho lokisa li-snaps ho sesebelisoa bakeng sa ho kenya. |
| 2 | Likoti tse 4 x VESA tse kenang, tse boloketsoeng ho kenya bracket ea VESA. |
1.3.3 Sehlopha sa Mahlakoreng
Ho hlahisa mefuta le litlhaloso tsa li-interfaces karolong e ka thōko.
| NO. | Tlhaloso |
| 1 | 1 x pontšo ea matla a khubelu, ho sebelisa ho view matla a sesebelisoa le boemo ba ho tima. |
| 2 | Kenyeletso ea 1 x DC, sehokelo sa DC Jack, se tšehetsang 12V ~ 24V DC ho kenya. |
| 3 | 1 x 3.5mm jack stereo audio output, e tšehetsa khokahanyo ea li-headphone. |
| 4 | 1 x HDMI, sehokelo sa Type-A, se hokelang phallong ea HDMI ea moamoheli oa PC. |
| 5 | 1 x USB touch screen port, Type-C USB connector, e hokelang boema-kepeng ba USB ba moamoheli oa PC ho fetisa matšoao a skrineng sa ho ama. |
| 6 | Likoti tse senyang mocheso, tse thusang ho ntlafatsa ts'ebetso ea ho pholisa. |
| 7 | 1 x Pula ea Rubber (sekoti se pota-potiloeng sa 7mm se pota-pota), se etselitsoeng ho fana ka litlhoko tse eketsehileng tsa tsamaiso ea cable. |
| 8 | 1 x “Brightness -” button, press the button to decrease the backlight brightness of the LCD screen. |
| 9 | 1 x konopo ea "Khanya +", tobetsa konopo ho eketsa khanya ea backlight ea skrini sa LCD. |
| 10 | 1 x konopo ea "Volume -", tobetsa konopo ho fokotsa molumo oa tlhahiso. |
| 11 | 1 x konopo ea "Volume +", tobetsa konopo ho eketsa molumo oa tlhahiso. |
| 12 | 1 x konopo ea "Homola", tobetsa konopo ho khutsisa molumo o tsoang. |
| 13 | Likoti tse senyang mocheso, tse thusang ho ntlafatsa ts'ebetso ea ho pholisa. |
Sesebelisoa sa ED-MONITOR-116C se kenyelletsa likonopo tse peli tsa tokiso ea khanya ea backlight le likonopo tse tharo tsa ho fetola molumo. Likonopo li na le 'mala o motšo 'me li tšoailoe ka lileibole tse hatisitsoeng skrineng 
, 
, 
, 
le 
hodima matlo.
| Konopo | Tlhaloso |
|
Tobetsa konopo ho eketsa khanya ea backlight ea skrine ea LCD. |
|
Tobetsa konopo ho fokotsa khanya ea backlight ea skrine ea LCD. |
|
Press the button to increase the output volume. |
|
Press the button to decrease the output volume. |
|
Press the button to mute the output audio. |
1.5 Lesupa
Sesebelisoa sa ED-MONITOR-116C se kenyelletsa letšoao la matla le khubelu, le tšoailoeng ka letšoao le hatisitsoeng skrineng "PWR" ntlong.
| Sesupo | Boemo | Tlhaloso |
| PWR | On | Sesebelisoa se buletsoe. |
| panya | Motlakase oa sesebelisoa ha oa tloaeleha, ka kopo emisa phepelo ea motlakase hang-hang. | |
| E tima | Sesebelisoa ha se sebetse. |
1.6 Sehokelo
Ho hlahisa litlhaloso le mesebetsi ea sebopeho se seng le se seng ho ED-MONITOR-116C.
1.6.1 Sebopeho sa Matla
Sesebelisoa sa ED-MONITOR-116C se kenyelletsa kou e le 'ngoe ea motlakase e nang le sehokelo sa DC Jack, se ngotsoeng "1V DC" ntlong. E tšehetsa tlhahiso ea 24V ~ 12V DC.
KELETSO
Ho khothaletsoa adaptara ea matla ea 12V 4A.
1.6.2 HDMI Interface
Sesebelisoa sa ED-MONITOR-116C se kenyelletsa 1 HDMI sehokelo sa ho kenya se nang le sehokelo sa Mofuta oa A, se ngotsoeng "HDMI INPUT" ka tlung, se sebelisetsoang ho hokahanya phallo ea HDMI ea moamoheli oa PC.
1.6.3 Mofuta oa C USB Interface
Sesebelisoa sa ED-MONITOR-116C se kenyelletsa sebopeho sa USB sa Mofuta oa 1, se ngotsoeng "USB TOUCH" ntlong. Khokahano ena e hokahana le boema-kepe ba USB ba moamoheli oa PC ho fetisa matšoao a skrineng sa ho ama.
1.6.4 Sebopeho sa Molumo
Sesebelisoa sa ED-MONITOR-116C se kenyelletsa sebopeho se le seng sa molumo (3.5mm 4-pole headphone jack), e ngotsoeng "
” ntlong, e tšehetsang tlhahiso ea molumo oa stereo.
2 Ho kenya sesebelisoa
Sesebelisoa sa ED-MONITOR-116C se tšehetsa ho kenngoa ka pele. Sephutheloana se tloaelehileng se kenyelletsa kit e kentsoeng ea Mounting kit (ED-ACCHMI-Front).
Boitokisetso:
- Thepa ea ED-ACCHMI-Front Mounting e se e fumanoe (e kenyelletsa 4 × M4 * 10 screws, 4 × M4 * 16 screws, le 4 snaps).
- Ho lokisitsoe screwdriver ea sefapano.
Mehato:
1. Determine the cutout dimensions on the cabinet based on the ED-MONITOR-116C’s size, as shown in the figure below.
Yuniti: mm
2. Drill holes on the cabinet according to the aperture size defined in Step 1.
3. Embed the ED-MONITOR-116C into the cabinet from the exterior side.
4. Lokisetsa likoti tsa screw (tse se nang khoele) tsa li-snaps le likoti tse kenyang li-snap lehlakoreng la sesebelisoa.
5. Secure the snaps to the device.
- Use 4 × M4*10 screws to fasten the snaps to the device by threading them through the nonthreaded holes and tightening them clockwise.
- Ebe, sebelisa li-screw tsa 4 × M4 * 16 ho boloka likheo ka har'a khabinete: Li kenye ka masoba a khoele, u hatelle lehlakoreng le ka hare la khabinete, 'me u li kenye ho fihlela li tiisitsoe ka botlalo.
3 Ho sebedisa sesebediswa
ED-MONITOR-116C e hloka moamoheli oa PC bakeng sa ts'ebetso mme ha e hloke ho kenya mokhanni. E hokahane le tlhahiso ea HDMI ea moamoheli oa PC pele, ebe o kenya matla sesebelisoa ho lumella ponts'o e tloaelehileng. E tšehetsa khanya ea morao-rao le phetoho ea molumo ka li-buttons le software e inehetseng.
3.1 Lithapo tse hokelang
Karolo ena e hlalosa mokhoa oa ho hokahanya likhoele.
Boitokisetso:
- Ho fumanoe adaptara ea matla e sebetsang.
- PC e sebetsang e se e fumanoe.
- Lithapo tse sebetsang tsa HDMI le tsa USB (Mofuta oa A ho isa ho Mofuta oa C oa USB) li se li fumanoe.
Setšoantšo sa moralo oa likhoele tse hokelang:
Ka kopo sheba ho 1.6 Sehokelo to obtain the pin definitions and wiring methods of each interface.
KELETSO
The HDMI INPUT interface of the ED-MONITOR-116C is compatible with various PC hosts. The figure below illustrates cable connection using a Raspberry Pi as an example.
- Phepelo ea motlakase
- Li-headphone
- Raspberry Pi
3.2 Ho qala sesebelisoa
ED-MONITOR-116C ha e kenyeletse sesebelisoa sa matla sa 'mele. Ka mor'a ho hokela mohloling oa matla, sesebelisoa se tla tima ka bohona. Ha e se e qalile ka botlalo, e tla bonts'a komporo ea moamoheli oa PC e hokahaneng.
3.3 Ho fetola khanya le Bolumo
ED-MONITOR-116C e ts'ehetsa khanya le tokiso ea molumo ka likonopo tsa 'mele le software.
Hang ha ED-MONITOR-116C e se e sebetsa, khanya ea lebone la morao-rao le molumo oa skrine li ka fetoloa ka likonopo tse hlano tse inehetseng tse ka lehlakoreng le lehlakoreng.
| Konopo | Tlhaloso |
|
Tobetsa konopo ho eketsa khanya ea backlight ea skrine ea LCD. |
|
Tobetsa konopo ho fokotsa khanya ea backlight ea skrine ea LCD. |
|
Press the button to increase the output volume. |
|
Press the button to decrease the output volume. |
|
Press the button to mute the output audio. |
3.3.2 Fetola Khanya le Bolumo ka Software
Hang ha ED-MONITOR-116C e hokahane le moamoheli oa PC mme e bonts'a hantle, khanya ea skrineng le bophahamo ba molumo li ka fetoloa ka software. Mekhoa ea ts'ebetso e fapana bakeng sa mefuta ea Desktop le Lite OS.
3.3.2.1 Raspberry Pi OS (Desktop)
E hlahisa mokhoa oa ho fetola khanya ea backlight ka UI ho Raspberry Pi OS (Desktop).
Boitokisetso:
- ED-MONITOR-116C e hokahane hantle le moamoheli oa Raspberry Pi ka tlhahiso e tloaelehileng ea ponts'o.
- Moamoheli oa Raspberry Pi o na le khokahano e tsitsitseng ea marang-rang.
Mehato:
1. Eketsa EDATEC apt repository ka ho phethahatsa litaelo tse latelang ka tatellano ho theminale.
2. Kenya sesebelisoa sa lisebelisoa tsa software.
3. Tobetsa ea 
letšoao k'honeng ea desktop e kaholimo ho le letšehali. Ebe u khetha "System Tools" → "EDATEC Monitor".
4. Fetola khanya le molumo ka ho sebelisa slide ho phanele ea "EDATEC Backlight".
KELETSO
Support executing the 
command in the terminal window to open the “EDATEC Backlight” panel.
3.3.2.2 Raspberry Pi OS (Lite)
Ho fetola khanya le molumo ka CLI ho Raspberry Pi OS (Lite).
Boitokisetso:
- ED-MONITOR-116C e hokahane hantle le moamoheli oa Raspberry Pi ka tlhahiso e tloaelehileng ea ponts'o.
- Moamoheli oa Raspberry Pi o na le khokahano e tsitsitseng ea marang-rang.
Mehato:
1. Eketsa EDATEC apt repository ka ho phethahatsa litaelo tse latelang ka tatellano ho theminale.
2. Kenya sesebelisoa sa lisebelisoa tsa software.
3. Phetha litaelo tse latelang ho botsa boemo ba hona joale ba khanya le litlhophiso tsa boemo ba molumo ka thoko.
- Botsa boemo ba hona joale ba khanya:
- Botsa boemo ba hona joale ba molumo:
4. Execute the following commands to set brightness level and volume level as required.
- Beha boemo ba khanya:
Hokae 
represents the brightness level with a range of 0~100.
- Beha boemo ba molumo:
Hokae 
represents the volume level with a range of 0~100.
Lengolo-tsoibila: sales@edatec.cn / support@edatec.cn
Web: www.edatec.cn
Phone: +86-15921483028(Chaena) | +86-18217351262(Overseas)
Litokomane / Lisebelisoa
 |
EDA Technology ED-MONITOR-116C Industrial Monitor and Display [pdf] Bukana ea Mosebelisi ED-MONITOR-116C Monitor le Pontšo ea Liindasteri, ED-MONITOR-116C, Monitor le Pontšo ea indasteri, Lekola le Pontšo, Pontšo. |