EDA Technology ED-HMI2002-070C Industrial
Automation and Control User Manual

Lengolo-tsoibila: sales@edatec.cn / support@edatec.cn
Web: www.edatec.cn

Phone: +86-15921483028(Chaena) | +86-18217351262(Overseas)

1 Hardware Manual

Khaolo ena e hlahisa sehlahisoa ho fetaview, lenane la ho paka, ponahalo, sesupo le sebopeho.

1.1 Ho fetaview

ED-HMI2002-070C ke HMI ea indasteri ea 7-inch e thehiloeng ho Raspberry Pi 4. Ho ea ka maemo a fapaneng a kopo le litlhoko tsa mosebedisi, litlhaloso tse fapaneng tsa RAM le lisebelisoa tsa k'homphieutha tsa karete ea SD li ka khethoa.

• RAM e ka khetha 1GB, 2GB, 4GB le 8GB
• Karete ea SD e ka khetha 32GB le 64GB

ED-HMI2002-070C provides HDMI, USB 2.0, USB 3.0 and Ethernet interfaces, supporting access to the network through Wi-Fi and Ethernet.

ED-HMI2002-070C integrates 7-inch LCD touch screen and is mainly used in industrial control and IOT.

1.2 Lenane la ho Paka

· Setsi sa 1x ED-HMI2002-070C

1.3 Ponahalo

E hlahisa mesebetsi le litlhaloso tsa li-interfaces phanele ka 'ngoe.

1.3.1 Panel e ka pele

Karolo ena e kenyelletsa mesebetsi le litlhaloso tsa phanele e ka pele.

1.3.2 Phanele e ka morao

Karolo ena e kenyelletsa likhokahano le litlhaloso tsa karolo e ka morao.

1.3.3 Sehlopha sa Mahlakoreng

Karolo ena e kenyelletsa likhokahano le litlhaloso tsa karolo ea lehlakore.

1.4 Lesupa

Karolo ena e hlahisa maemo a fapaneng le meelelo ea matšoao a fumanehang ho EDHMI2002-070C.

1.5 Sehokelo

Ho hlahisa tlhaloso le mosebetsi oa sebopeho se seng le se seng sehlahisoa.

1.5.1 Phepelo ea Matla

ED-HMI2002-070C e kenyelletsa matla a le mong, 'me silkscreen ke "PWR IN". Sehokedi ke USB Type-C, e tshehetsang 5V 3A matla a ho kenya.

KELETSO
E le hore Raspberry Pi 4 e fihlele tshebetso e ntlafetseng, ho kgothaletswa ho sebedisa 5V 3A adapter ea matla.

1.5.2 1000M Ethernet

1.5.3 Audio

The ED-HMI2002-101C device contains 1 audio interface, 3.5mm four-section headphone terminal, and the silkscreen is ““. It supports OMTP specification stereo headphone output and single channel microphone recording.

1.5.4 HDMI

ED-HMI2002-070C e kenyelletsa likou tse 2 tsa HDMI, 'me silika ke "HDMI". Sehokedi ke microHDMI, e ka hokelang dipontshong tsa HDMI mme e tshehetsa ho fihla ho 4Kp60.

1.5.5 USB2.0

ED-HMI2002-070C includes 2 USB 2.0 ports, and the silkscreen is ““. The connector is USB Type-A, which can connect to standard USB 2.0 peripherals and supports up to 480Mbps.

1.5.6 USB3.0

ED-HMI2002-070C includes 2 USB 3.0 ports, and the silkscreen is ““. The connector is USB Type-A, which can connect to standard USB 3.0 peripherals and supports up to 5Gbps.

2 Ho kenya sesebelisoa

Khaolo ena e hlalosa ts'ebetso e khethehileng ea ho kenya sesebelisoa.

2.1 Ho kenya Raspberry Pi 4 (ho ikhethela)

Haeba mofuta oa sehlahisoa o rekiloeng ke moreki ha o kenyelle Raspberry Pi 4, Raspberry Pi 4 e hloka ho kengoa pele.

Tokisetso

• ED-HMI2002-070C le karete ea SD li fumanoe ka lebokoseng la ho paka.
• Raspberry Pi 4 e se e loketse.
• Ho lokisitsoe screwdriver ea sefapano.

Mehato

1. Kenya karete ea SD ho slot ea karete ea SD ea Raspberry Pi 4.
2. Sebelisa screwdriver ho lokolla li-screw tse 4 M3 ho ED-HMI2002-070C case counterclockwise, 'me u tlose mokotla.
3. Sebelisa screwdriver ho lokolla 3 M2.5 screws ho ED-Pi4PCOOLER counterclockwise, 'me u tlose cooler. KELETSO
   – ED-Pi4PCOOLER is an optional cooling accessory.
   – If there is a film of thermal conductive silicone, please remove it .
4. Beha Raspberry Pi 4 ka morao skrineng sa LCD e le hore masoba a ho kenya Raspberry Pi 4 a ka hokahana le masoba a mane a ka morao skrineng sa LCD.
5. Fetisa thapo ea FPC ka lesoba le boloketsoeng ho ED-Pi4PCOOLER.
6. Hokela thapo ea FPC ho CAMERA 'me u BONTŠE likou tsa Raspberry Pi 4 ka ho latellana.
7. Etsa masoba a 3 a ntseng a hola a ED-Pi4PCOOLER a hokahana le masoba a ntseng a hola a Raspberry Pi 4.
8. Kenya 3 M2.5 * 12 screws le 1 M2.5 * 5 screw, ebe u li tiisa ka ho le letona ho tiisa Raspberry Pi 4 le ED-Pi4PCOOLER ka morao ho skrine sa LCD.
9. Hokela thapo ea matla ho 40-Pin e lumellanang le Raspberry Pi 4.
10. Koahela mokotla, kenya li-screws tse 4 M3, 'me u tiise ka ho le letona ho lokisa mokotla ka morao ho skrine sa LCD.

2.2 Kemiso e kenyellelitsoeng

Sesebelisoa sa ED-HMI2002-070C se tšehetsa ho kenngoa ka pele. Sephutheloana se Tloaelehileng ha se kenyelle lisebelisoa tse kenyang phanele, ka kopo reka ED-ACCHMI-Front ho tsoa ho barekisi ba rona esale pele.

Tokisetso

• ED-ACCHMI-Front accessory kit e fumanoe (e na le 4xbuckles, 4xM4 * 10 screws le 4xM4 * 16 screws).
• Ho lokisitsoe screwdriver ea sefapano.

Mehato

1. ensure the opening size of the cabinet according to the size of ED-HMI2002-070C, as shown in the figure below.

2. phunya lesoba holim'a khabinete ho latela boholo ba lesoba la step1.

3. Embed the ED-HMI2002-070C into the cabinet from the outside.

4. Lokisetsa lesoba la screw (sekoti se sa baleheng) sa buckle le lesoba la ho kenya li-buckle ho sesebelisoa.

5. Sebelisa li-screws tsa 4 M4 * 10 ho feta ka har'a buckle le ho e tiisa ka ho toba ho lokisa sekoti ho sesebelisoa; ebe o sebelisa 4 M4 * 16 screws ho feta ka lesoba screw (threaded lesoba) ea buckle le tighten clockwise ho fihlela qetellong ka buckles.

3 Ho qala sesebelisoa

Khaolo ena e hlahisa mokhoa oa ho hokahanya likhoele le ho bulela sesebelisoa.

3.1 Lithapo tse hokelang

Karolo ena e hlalosa mokhoa oa ho hokahanya likhoele.

Tokisetso

• Lisebelisoa tse kang pontšo, mouse, keyboard le adaptara ea matla tse ka sebelisoang ka tloaelo li se li lokile.
• Marang-rang a ka sebelisoang ka mokhoa o tloaelehileng.
• Fumana thapo ya HDMI le thapo ya netweke e ka sebediswang ka tlwaelo.

Setšoantšo sa moralo oa likhoele tse hokelang:

Ka kopo, sheba 1.5 Interface bakeng sa tlhaloso ea pin ea sebopeho se seng le se seng le mokhoa o khethehileng oa ho hokahanya.

3.2 Ho qalisa Sisteme Lekhetlo la Pele

ED-HMI2002-070C ha e na sesebelisoa sa motlakase. Ka mor'a hore motlakase o kopane, tsamaiso e tla qala.

Sehlahisoa se kentsoe ka sistimi ea Desktop ha se tsoa fekthering. Ka mor'a hore sesebelisoa se qale, se tla kena ka ho toba ho desktop.

KELETSO
Lebitso la mosebelisi la kamehla ke pi, password ea kamehla ke raspberry.

or more information about Raspberry Pi 4 configuration operations, please refer to the documentation on the Raspberry Pi official websebaka. Tsela ea litokomane ke: Raspberry Pi (https://www.raspberrypi.com/) .

4 Ho Kena ka Remote

Khaolo ena e hlahisa mokhoa oa ho kena sesebelisoa u le hole.

4.1 Ho Fumana Sesebelisoa sa IP

ho fumana IP ea sesebelisoa

4.2 Ho hokela ho Desktop ea Sesebelisoa ka VNC

Kamora hore sesebelisoa se qale ka mokhoa o tloaelehileng, o ka khetha ho hokela sesebelisoa ka VNC ho se hlophisa kapa ho se lokisa.

Boitokisetso:

• Setšoantšo sa RealVNC ViewSesebelisoa se kentsoe ho PC.
• ED-HMI2002-070C e hokahane le marang-rang ka router.
• Aterese ea IP ea ED-HMI2002-070C e se e fumanoe.
• Ts'ebetso ea VNC ho sistimi ea ED-HMI2002-070C e buletsoe, joalo ka ha ho bonts'itsoe setšoantšong se latelang.

Mehato:

1. Bula RealVNC Viewer ebe u khetha “Khokelo e ncha…” ho File ho menu bareng ho bula fensetere bakeng sa ho theha kgokelo, joalokaha ho bontšitsoe setšoantšong se latelang.

2. Ka mor'a ho kenya aterese ea IP ea ED-HMI2002-070C, tobetsa "OK".

3. Kenya lebitso la mosebedisi le phasewete lebokoseng la netefatso la Netefatso le hlahang.

KELETSO
Lebitso la mosebelisi la kamehla ke pi, password ea kamehla ke raspberry.

4. Khetha "OK" ho kena le ho hokela komporong e hole.

5 Ho kenya OS (ka boikhethelo)

• Haeba u reka sesebelisoa ntle le Raspberry Pi 4 le karete ea SD, sesebelisoa ha se tle ka sistimi e sebetsang ka boiketsetso. Raspberry Pi 4 e hloka ho kenngoa pele, ebe o hloka ho kenya os. Khamphani ea rona e ts'ehetsa ho kenya OS ka ho kenya Raspberry Pi OS e tloaelehileng pele, ebe o kenya sephutheloana sa Firmware.
• Haeba u reka sesebelisoa ka Raspberry Pi 4 le karete ea SD, sesebelisoa se romelloa ka sistimi e sebetsang ka boiketsetso. Haeba OS e senyehile nakong ea ts'ebeliso kapa mosebelisi a hloka ho khutlisa OS, hoa hlokahala ho jarolla hape setšoantšo se nepahetseng sa sistimi ebe o se kenya. Khamphani ea rona e ts'ehetsa ho kenya OS ka ho kenya Raspberry Pi OS e tloaelehileng pele, ebe o kenya sephutheloana sa Firmware.

Karolo e latelang e hlalosa ts'ebetso e ikhethileng ea ho jarolla litšoantšo, ho khantša karete ea SD le ho kenya liphutheloana tsa Firmware.

KELETSO
Ka kopo etsa bonnete ba hore u kenya sephutheloana sa rona sa Firmware ka mor'a hore u kenye Standard Raspberry Pi OS, ho seng joalo pontšo le ho ama li ke ke tsa sebetsa.

5.1 Ho khoasolla OS File

U ka khoasolla Raspberry Pi OS e tsamaellanang le eona file ho latela litlhoko tsa hau tsa 'nete, tsela ea ho jarolla e thathamisitsoe ka tlase:

5.2 Ho benya ho SD Card

Ho khothalletsoa ho sebelisa lisebelisoa tsa semmuso tsa Raspberry Pi. Litsela tsa ho jarolla ke tse latelang:

• Raspberry Pi Imager https://downloads.raspberrypi.org/imager/imager_latest.exe (https://downloads.raspberrypi.org/imager/imager_latest.exe)
• Sebopeho sa karete ea SD: https://www.sdcardformatter.com/download/ (https://www.sdcardformatter.com/download/)

Boitokisetso:

• Ho khoasolla le ho kenya lisebelisoa tsa molao komporong ho phethiloe.
• Sebali sa karete ea SD se lokisitsoe.
• OS file e fumanoe.

Mehato:
Mehato e hlalosoa ho sebelisoa sistimi ea Windows joalo ka example.

1. Open the device case, then pull out SD card.

a. Tlosa khese ea tšepe ea ED-HMI2002-070C ka ho khoasolla li-screw tsa 4 M3 ka har'a mokotla oa tšepe ka lehlakoreng le leng ka screwdriver.

b. Tlosa Raspberry Pi 4 ka ho khoasolla li-screw tse 'nè tse behang Raspberry Pi 4 ka tatellano ea nako ka screwdriver.

c. Hula karete ea SD ho slot ea karete ea SD ea Raspberry Pi 4.

2. Kenya karete ea SD ho sebali sa karete, ebe u kenya sebali sa karete koung ea USB ea komporo ea hau.

3. Bula SD Card Formatter, khetha tlhaku e hlophisitsoeng ea koloi, 'me u tobetse "Format" ka tlaase ho le letona ho fomata.

4. Ka lebokoseng la pop-up, khetha "E".

5. Ha fomete e phethiloe, tobetsa "OK" lebokoseng la kapele.

6. Koala SD Card Formatter.

7. Bula Raspberry Pi Imager, khetha "KHETHA OS" 'me u khethe "Sebelisa Tloaelo" sebakeng sa pop-up.

8. Ho ea ka potlako, khetha OS file tlas'a tsela e hlalositsoeng ke mosebedisi ebe u khutlela leqepheng la sehlooho.

9. Tobetsa "KHETHA STORAGE", khetha sesebelisoa sa kamehla sebopeho sa "Storage", 'me u khutlele leqepheng le ka sehloohong.

10. Tobetsa "E LATELANG", khetha "NO " pop-up "Sebelisa OS customization?" pane.

11. Khetha "YES" fenstereng ea "Temoso" ea pop-up ho qala ho ngola setšoantšo.

12. Ka mor'a hore ho ngola OS ho phethoe, the file e tla netefatsoa.

13. Ka mor'a hore netefatso e phethoe, tobetsa "TSOELA PELE" lebokoseng la pop-up "Ngola e Atlehile".

14. Close the Raspberry Pi Imager, remove the SD card. 15. Insert the SD card into the SD card slot of the Raspberry Pi 4 and close the device case.

a. Kenya karete ea SD ho slot ea karete ea SD ea Raspberry Pi 4.

b. Sireletsa Raspberry Pi 4 ka ho tiisa li-screws tse 4 bakeng sa ho kenya Raspberry Pi 4 ho ea ka nako ka screwdriver.

c. Tiisa li-screw tsa 4 M3 ka har'a kese ea tšepe ea ED-HMI2002-070C ho ea ka sesupa-tsela ka screwdriver ebe u koala mokotla oa sesebelisoa.

5.3 Ho kenya Sephutheloana sa Firmware

Ka mor'a ho kenya Raspberry Pi OS e tloaelehileng ho ED-HMI2002-070C. U hloka ho lokisa tsamaiso ka ho eketsa mohloli oa edatec apt le ho kenya sephutheloana sa firmware ho etsa hore tsamaiso e sebetse. Se latelang ke example ea Debian 12 (bookworm) desktop version.

Tokisetso:

• Ho benya ho karete ea SD ea Raspberry Pi standard OS (bookworm) ho phethiloe.
• Sesebelisoa se qalile ka mokhoa o tloaelehileng 'me tlhophiso e loketseng ea boot e phethiloe.

Lengolo-tsoibila: sales@edatec.cn / support@edatec.cn
Web: www.edatec.cn

Phone: +86-15921483028(Chaena) | +86-18217351262(Overseas)

Litokomane / Lisebelisoa

EDA Technology ED-HMI2002-070C Industrial Automation le Control [pdf] Bukana ea Mosebelisi ED-HMI2002-070C, ED-HMI2002-070C Industrial Automation and Control, ED-HMI2002-070C, Industrial Automation and Control, Automation and Control, Control

Litšupiso

• Bukana ea Mosebelisi