EBYTE E160-TxFS1 4 Way Key Transmitter Module
Khaolo ea 1 Product Overview
Kenyelletso ea Sehlahisoa
E160-TxFS1 ke mochine oa theko e tlaase oa OOK/ASK 315MHz/433.92MHz o nang le mohala o nang le mohala o nang le konopo ea 4-way e entsoeng ke Ebyte. E sebelisa li-chips tse sebetsang hantle, PLL e kopantsoeng ka hare le matla amplifier ho netefatsa tlhahiso ea matla a pontšo; e na le li-buttons tse 4 tse ikemetseng (litekanyetso), e ts'ehetsa encoding e tloaelehileng ea EV1527, 'me e tla le khoutu ea aterese ea 20-bit (lihlopha tse limilione) fekthering; e na le litšobotsi tsa boholo bo nyane, tšebeliso ea matla a tlase haholo, ts'ebetso e phahameng, matla a maholotage, le matla a phahameng . E ka fetisa setifikeiti sa FCC le CE mme e loketse phepelo ea matla a betri ea konopo. E loketse lits'ebetso tse bonolo tsa taolo: taolo e hole ea lisebelisoa tsa lapeng, taolo ea hole ea toy, sistimi ea taolo ea phihlello e hole, baesekele ea motlakase le maemo a mang a ts'ebeliso.
*Mojule ona o na le khoutu e ikhethang ea aterese (lihlopha tse 20/milione), kahoo ha ho na lebaka la ho tšoenyeha ka phetisetso ea khoutu ea aterese (monyetla o monyane haholo oa motho a le mong ho milione).
Likaroloana
- Boholo bo nyane: 20.3 × 13.3 × 3.0mm (L × W × H);
- Ts'ebetso e pharalletseng voltage: 1.8V ~ 5.5V;
- Tšebeliso ea matla a boemo bo tlase haholo: 0.01uA (ho koala hona joale);
- Matla a phahameng: + 17dBm (matla a 5V);
- Ho hanyetsa mocheso o phahameng: e ka sebetsa ka tloaelo ho 120 ℃;
- ESD HBM matla a ts'ireletso ea motlakase: 8KV (RFout pin 6KV);
- E lumellana le sebopeho se tloaelehileng sa encoding ea EV1527;
- Khoutu ea aterese ea 20-bit e tiileng ka hare (lihlopha tse limilione);
- E na le lithapo tse 4 tse ikemetseng tsa ho kenya;
- Sebaka sa puisano: 240m;
Boemo ba Kopo
- Taolo e hole ea lisebelisoa tse nyane (fan, mabone)
- Toy remote control
- Remoutu ea tsamaiso ea ho kena
- Libaesekele tsa motlakase
Khaolo ea 2 Litlhaloso
RF parameters
| RF parameters | Paramethara Boleng | Ela hloko |
| Khafetsa ea ho sebetsa (MHz) | 315/433.92 | E160-T3FS1(315MHz)/E160-T4FS1(443.92MHz) |
| Ho feto-fetoha ha molumo oa lentsoe | BOTSA/ HO LOKILE | AmpLitude Keying / On-Off Keying |
| Matla a thibelang (dBm) | - | Mojule oa transmitter ha o na parameter ena |
| Boholo ba matla a ho fetisa
(dBm) |
14±1.0 | Ha phepelo voltage ke 3V |
| 17±1.0 | Ha phepelo voltage ke 5V | |
| Khatello ea Harmonic (dBc) | >45 | @433MHz, 15dBm, harmonic ea bobeli |
| Sekhahla sa phetisetso (kbps) | 2.86 | Boleng bo sa fetoheng |
| Ho kheloha khafetsa (MHz) | ±0.05 | - |
| Antenna impedance ( Ω ) | 50 | - |
| Bohole ba puisano ea litšupiso ( m ) |
240 |
Ha e sebelisoa le E160-RxFS1, sebakeng se hlakileng le se bulehileng, ka phaello ea antenna ea 1.5dBi le bolelele ba 2m. |
Litekanyetso tsa motlakase
| Motlakase
mekhahlelo |
Bonyane |
E tloaelehileng
Boleng |
Boholo |
Ela hloko |
|
Tshebetso voltage (V) |
1. 8 |
3.0 |
5.5 |
≥ 5.0 V e ka netefatsa matla a phahameng a tlhahiso, a fetang 5.5 V e ka
baka ho kgathala |
| Boemo ba puisano (V) | 1.8 | 3.0 | 5.5 | E itšetlehile ka phepelo voltage |
|
Emission current (mA) |
- |
10.0 |
- |
Ha phepelo voltage ke 5.0V, maqhubu ke 433.92MHz, le ho
matla a tlhahiso ke 17dBm, tšebeliso ea matla hang-hang |
| Fumana hona joale (mA) | - | - | - | Mojule oa transmitter ha o na ho amohela hona joale |
| Nako ea ho robala (μA) | - | 0.01 | - | Ha o sa fetise data (ho fetisa boemo), e robetse |
|
Nako ea ho qala (ms) |
- |
2.0 |
- |
Nako e nkang hore mojule o kene maemong a tloaelehileng a ho sebetsa kamora
matla-on |
| Tšireletso ea ESD (KV) | -8 | +8 | HBM, ntlha e khethehileng: RF pin ke ±6KV | |
| Thempereichara ea ho sebetsa (°C) | -40 | - | + 120 | Moralo oa boemo ba indasteri |
| Mongobo o sebetsang (%rh) | 10 | - | 90 | - |
| Thempereichara ea polokelo (℃) | - 65 | - | +150 | - |
Lisebelisoa tsa lisebelisoa
| Lisebelisoa tsa lisebelisoa | Boleng ba Paramethara | Ela hloko |
|
Leqhubu la kristale (MHz) |
9.84374 | E160-T3FS1(315MHz) |
| 13.56 | E160-T4FS1(443.92MHz) |
| Boholo ba mojule (mm) | 20.3*13.3*3.0 | Bolelele*Bophara*Bophahamo |
| Mofuta oa antenna | Stamp Likoti | - |
| Khokahano ea puisano | GPIO | Boemo ba puisano 1.8 ~ 5.5V, 3.3V bo khothaletsoa ho netefatsa ts'epo ea data |
| Sephutheloana | Patch/Stamp Sekoti | Pin space 2.54mm, ka kopo bona Khaolo ea 3 bakeng sa lintlha tse qaqileng tsa boholo |
| Boima (g) | 3.65 | - |
Khaolo ea 3 Mechanical Dimensions le Pin Tlhaloso
| Nomoro ea phini | Pin
Lebitso |
Pin
Tataiso |
Pina Morero |
| 1 | K0 | Kenyeletso | Pini ea senotlolo, boemo bo tlase bo sebetsa, bo nka bonyane 100ms, boleng ba bohlokoa ke "0001" |
| 2 | K1 | Kenyeletso | Pini ea senotlolo, boemo bo tlase bo sebetsa, bo nka bonyane 100ms, boleng ba bohlokoa ke "0010" |
| 3 | K2 | Kenyeletso | Pini ea senotlolo, boemo bo tlase bo sebetsa, bo nka bonyane 100ms, boleng ba bohlokoa ke "0100" |
| 4 | K3 | Kenyeletso | Pini ea senotlolo, boemo bo tlase bo sebetsa, bo nka bonyane 100ms, boleng ba bohlokoa ke "1000" |
| 5 | VDD | Phepelo ea motlakase | DC 1.8 ~ 5.5V |
| 6 | GND | - | Sebaka sa Matla |
| 7 | GND | - | Sebaka sa Matla |
| 8 | GND | - | Sebaka sa Matla |
| 9 | NTJA | Sephetho | Pin ea antenna (mojule ea transmitter, e fetisa feela, ha e amohelehe) |
Khaolo ea 4 Tsoelo-pele ea software le tšebeliso
E160-TxFS1 e ka sebelisoa ka kotloloho le mojule oa rona oa moamoheli oa E160-RxFS1. E160-TxFS1 e ka kopanngoa le linotlolo tse 'nè tsa ka ntle ho romela litekanyetso tsa bohlokoa, kapa e ka kopanngoa le pin ea MCU ho etsisa liketso tsa bohlokoa ho romela litekanyetso tsa bohlokoa.
Haeba mosebelisi a batla ho fetisa lintlha tse rometsoeng ke transmitter ea E160-TxFS1 qetellong ea ho amohela, ba tlameha ho utloisisa sebopeho sa foreimi ea data e rometsoeng ke E160-TxFS1. Leqhubu la lisekoere le theoleloang ke pheletso ea ho amohela ka yuniti ea RF e na le "khoutu ea ho hokahanya", "khoutu ea aterese" ea 20-bit le "khoutu ea senotlolo" ea 4-bit (molao oa khouto ea 1527). Nako ea motheo ea yuniti ea letšoao la E160-TxFS1 ke T (ms), T = 0.35ms. Sekhahla sa data se na le 4 Ts, eo "DATA (1) "e nang le 3 * T boemo bo phahameng hammoho le 1 * T boemo bo tlaase; ” DATA (0) ” e na le 1 * T boemo bo phahameng mmoho le 3 * T boemo bo tlase.
| 1527 Melao ea Khouto | |||||
| 32* T | 80 * T(20 likotoana) | 4 * T(1 hanyane) | 4 * T(1bit) | 4 * T(1bit) | 4 * T(1bit) |
| Khoutu e tsamaisanang | Khouto ea aterese C0~C19 (lihlopha tse limilione) | D0 | D1 | D2 | D3 |
Khaolo ea 5 Moralo oa Hardware
- Ho khothalletsoa ho sebelisa motlakase o laoloang ke DC ho matlafatsa mojule. Motlakase oa phepelo ea matla o lokela ho ba nyane ka moo ho ka khonehang (ka tlase ho 100mV), mme mojule o hloka ho theoa ka mokhoa o tšepahalang.
- Ka kopo ela hloko khokahano e nepahetseng ea lipalo tse ntle le tse mpe tsa phepelo ea motlakase. Khokelo ea Reverse e ka baka tšenyo e sa feleng mojuleng.
- Ka kopo, hlahloba phepelo ea motlakase ho netefatsa hore e ka har'a matla a khothaletsoangtage. Haeba e feta boholo ba boleng, mojule o tla senyeha ka ho sa feleng.
- Ka kopo, hlahloba botsitso ba phepelo ea motlakase. Molumotage ha e lokele ho fetoha haholo kapa kgafetsa.
- Ha ho etsoa potoloho ea motlakase bakeng sa module, hangata ho kgothaletswa ho boloka margin e fetang 30%, e leng se loketseng ts'ebetso e tsitsitseng ea nako e telele ea mochine oohle;
- Mojule o lokela ho bolokoa hole kamoo ho ka khonehang ho tloha likarolong tse nang le tšitiso e kholo ea motlakase, joalo ka lisebelisoa tsa motlakase, li-transformer, le lithapo tse phahameng tsa maqhubu;
- Tsamaiso ea dijithale ea maqhubu a phahameng, ho tsamaisa analoge ea maqhubu a holimo, le ho tsamaisa motlakase li tlameha ho qoba botlaaseng ba mojule. Haeba ho hlokahala ho feta tlas'a mojule, ho nka hore mojule o rekisoa ka Lera le ka Holimo, koporo ea fatše e lokela ho behoa ka Lera le ka Holimo la karolo ea ho ikopanya le mojule (koporo eohle e lokela ho beoa le ho theoa hantle), 'me e tlameha ho ba teng. haufi le karolo ea dijithale ea mojule le ho tsamaisoa ka Lera le ka Tlase;
- Ho nka hore mojule o rekisoa kapa o behiloe ho Layer e ka Holimo, ho boetse ho fosahetse ho tsamaisa likhoele ka mokhoa o sa reroang ho Lera e ka tlase kapa likarolo tse ling, tse tla ama lets'oao la mojule le ho amohela kutlo ho likhato tse fapaneng;
- Haeba ho na le lisebelisoa tse nang le tšitiso e kholo ea motlakase ho potoloha mojule, e tla ama ts'ebetso ea module haholo. Ho khothaletsoa ho li boloka hole le mojule ho latela matla a tšitiso. Haeba ho khoneha, ho itšehla thajana ho loketseng le ho sireletsa li ka etsoa.
- Haeba ho na le mesaletsa e nang le tšitiso e kholo ea motlakase ho pota-potile module (high-frequency digital, high-frequency analog, matla a matla), e tla boela e ame haholo ts'ebetsong ea module. Ho khothaletsoa ho li boloka hole le mojule ho latela matla a tšitiso. Haeba ho khoneha, ho itšehla thajana ho loketseng le ho sireletsa li ka etsoa.
- Leka ho lula hole le liprothokholo tse ling tsa TTL tseo 'mele oa tsona e leng 2.4GHz, joalo ka USB3.0;
- Sebopeho sa ho kenya antenna se na le tšusumetso e kholo ts'ebetsong ea module. Etsa bonnete ba hore antenna e pepesitsoe, 'me ka ho khetheha e ea holimo. Ha mochine o kenngoa ka hare ho ntlo, o ka sebelisa mohala oa boleng bo phahameng ba antenna ho atolosa antenna ho ea ka ntle ho ntlo;
- Antenna ha ea lokela ho kenngoa ka har'a khetla ea tšepe, kaha sena se tla fokotsa sebaka sa phetisetso haholo.
Khaolo ea 6 Reference Circuit
Khaolo ea 7 Lipotso Tse Botsoang Hangata
Sebaka sa phetisetso ha se hantle
- Ha ho na le tšitiso ea puisano e otlolohileng, sebaka sa puisano se tla fokotsoa ho latela;
- Thempereichara, mongobo, le ho kena-kenana le mecha ea phatlalatso ho ka eketsa sekhahla sa tahlehelo ea pakete ea puisano;
- Mobu o monya le ho bonahatsa maqhubu a seea-le-moea, kahoo liphello tsa liteko li fokola ha li le haufi le fatše;
- Metsi a leoatle a na le matla a matla a ho monya maqhubu a seea-le-moea, kahoo phello ea teko lebōpong la leoatle e fokola;
- Haeba ho na le lintho tsa tšepe haufi le antenna, kapa antenna e kenngoa ka har'a khetla ea tšepe, ho fokotsa matšoao ho tla ba ho tebileng haholo;
- Rejistara ea matla e behiloe ka mokhoa o fosahetseng, kapa tekanyo ea moea e behiloe holimo haholo (e phahameng ea tekanyo ea moea, sebaka se haufi le ho feta);
- Phepelo ea motlakase voltage mocheso oa kamore e tlase ho feta boleng bo khothalletsoang. E tlase molumotage, ho fokotsa tlhahiso ea matla .
- Antenna e sebelisitsoeng ha e tsamaellane hantle le mojule kapa antenna ka boeona e na le litaba tsa boleng.
Li-module li kotsing ea ho senyeha
- Ka kopo, hlahloba phepelo ea motlakase ho netefatsa hore e ka har'a matla a khothaletsoangtage. Haeba e feta boholo ba boleng, module e tla senyeha ka ho sa feleng .
- Ka kopo, hlahloba botsitso ba phepelo ea motlakase. Molumotage ha ea lokela ho feto-fetoha haholo kapa khafetsa.
- Ka kopo netefatsa ts'ebetso ea anti-static nakong ea ho kenya le ho sebelisoa, kaha likarolo tse phahameng tsa maqhubu li na le maikutlo a matla a motlakase o tsitsitseng;
- Ka kopo etsa bonnete ba hore mongobo ha o phahame haholo nakong ea ho kenya le ho sebelisoa, kaha likarolo tse ling ke lisebelisoa tse lemohang mongobo ;
- Haeba ho se na tlhokahalo e khethehileng, ha e khothalletsoe ho e sebelisa ka mocheso o phahameng haholo kapa o tlaase haholo.
Sekhahla sa phoso e nyane haholo
- Ho na le tšitiso e tsoang ho lets'oao le ts'oanang la maqhubu haufinyane. Lula hole le mohloli oa tšitiso kapa u fetole maqhubu kapa mocha ho qoba tšitiso.
- Motlakase o sa khotsofatseng o ka boela oa baka litlhaku tse senyehileng, kahoo ho tšepahala ha phepelo ea motlakase ho tlameha ho netefatsoa;
- Lithapo tse atolositsoeng kapa lithapo tsa phepelo tsa boleng bo tlase kapa tse telele haholo le tsona li ka baka sekhahla se phahameng sa phoso.
Khaolo ea 8 Litaelo tsa Ts'ebetso ea Welding
Reflow mocheso
Profile Sebopeho |
Litšobotsi tsa curve | Seboka sa Sn-Pb | Kopano ea mahala ea Pb |
| Peista ea Solder | Peista ea Solder | Sn63/Pb37 | Sn96.5/Ag3/Cu0.5 |
| Preheat Temperature min (Tsmin) | Mocheso o fokolang oa ho futhumatsa pele | 100 ℃ | 150 ℃ |
| Mocheso o phahameng oa mocheso (Tsmax) | Boholo ba mocheso oa preheating | 150 ℃ | 200 ℃ |
| Nako ea Preheat (Tsmin ho Tsmax)(ts) | Nako ea ho futhumatsa | 60-120 set lao | 60-120 set lao |
| Karolelano ea ramp- sekhahla sa ho nyoloha (Tsmax ho ea ho Tp) | Karolelano ea sekhahla sa ho nyoloha | 3℃/motsotswana max | 3℃/motsotswana max |
| Mocheso oa Mokelikeli (TL) | Mocheso oa mocheso oa metsi | 183 ℃ | 217 ℃ |
| Nako(tL)E bolokiloe Holimo(TL) | Nako e kaholimo ho liquidus | 60-90 set lao | 30-90 set lao |
| Thempereichara e holimo (Tp) | Mocheso o phahameng | 220-235 ℃ | 230-250 ℃ |
| Karolelano ea ramp- sekhahla se tlase (Tp ho Tsmax) | Karolelano ea sekhahla sa ho theoha | 6℃/motsotswana max | 6℃/motsotswana max |
| Nako ea 25 ℃ ho fihlela mocheso o phahameng | Nako ho tloha ho 25 ℃ ho ea ho mocheso o phahameng | Metsotso e 6 max | Metsotso e 8 max |
Reflow Oven Curve
Khaolo ea 9 Mokhoa oa ho paka ka bongata
Nalane ea Phetoho
| Phetolelo | Letsatsi la Phetoho | Lintlha tsa Tlhahlobo | Mohlokomeli |
| 1.0 | 2024-12-27 | Khatiso ea pele | Ning |
Mabapi le rona
Mohala oa thekiso: 4000-330- 990 Office Phone: 4000-330 -990
Tšehetso ea tekheniki: support@cdebyte.com Semolao websebaka: www.ru-ebyte.com Aterese ea Khampani: 2nd Floor, Building B2, No. 199, Xiqu Avenue, High-tech Zone, Chengdu, Sichuan
Lipotso tse atisang ho botsoa (FAQ)
- P: Na mojule oa E160-TxFS1 o ka sebelisoa le li-module tse ling tsa moamoheli?
A: E160-TxFS1 e etselitsoe ho sebetsa ka kotloloho le mojule oa moamoheli oa E160-RxFS1 bakeng sa ts'ebetso e nepahetseng. - Q: Ke sebaka sefe se khothaletsoang sa puisano bakeng sa mojule oa E160-TxFS1?
A: Sebakeng se hlakileng le se bulehileng, ha se sebelisoa le E160-RxFS1 le ka phaello ea antenna ea 1.5dBi ka bolelele ba 2m, sebaka sa puisano sa litšupiso se hlalositsoe.
Litokomane / Lisebelisoa
 |
EBYTE E160-TxFS1 4 Way Key Transmitter Module [pdf] Bukana ea Mosebelisi E160-TxFS1, E160-TxFS1 4 Way Key Transmitter Module, 4 Way Key Transmitter Module, Key Transmitter Module, Transmitter Module, Module |
