TID Series Mocheso-Tsamaiso Indicator
Buka ea Tataiso
Litlhaloso - Litaelo tsa ho kenya le ho sebetsa
Series TID e theko e tlaase e lumella basebelisi ho lekola mocheso kapa boleng ba ts'ebetso.
Mekhahlelo ea mocheso e fumaneha ho tloha ho -58 ho isa ho 302 ° F ho sebelisoa e 'ngoe ea lisebelisoa tsa rona tsa mocheso oa PTC kapa NTC. Litekanyetso tsa ts'ebetso li ka hlahisoa ho tloha ho -999 ho isa ho lipalo tse 999 ho sebelisa lets'oao la 4-20 mA ho tsoa ho e 'ngoe ea li-transmitters tsa rona tse fapaneng. Letšoao la ts'ebetso le na le nako e feto-fetohang le li-zero ho mefuta ea 4-20 mA.
Ho kenya
Hlokomela: Sesebelisoa se tlameha ho beoa hole le ho thothomela, litšusumetso, metsi le likhase tse senyang.
- Seha lesoba ka phanele 2.80 x 1.14 ka (71 x 29 limilimithara).
- Sebelisa silicone (kapa gasket ea rabara) ho potoloha moeli oa lesoba ho thibela ho lutla.
- Kenya yuniti ka lesoba la phanele.
- Tsamaisa dikotwana tse tla ntshuwang hodima yuniti ho tloha ka morao ho fihlela o bolokehile phanele.
- Tlosa sekoahelo se ka morao ho yuniti ea terata.
- Setšoantšo sa lithapo se bonts'oa kaholimo ho yuniti.
LIEKETSENG TS'OANELO
Sebaka: -58 ho 302 ° F (thermistor); -999 ho 999 lipalo (4-20 mA).
Kenyo: Thermistor ea PTC/NTC kapa 4-20 mA.
Litlhoko tsa Matla: 115 VAC, 230 VAC, 24 VAC / DC.
Ho nepahala: > 1%.
Hlahisa: lipalo tse 3; pontsho e kgubedu, botala kapa boputsoa.
Qeto: 1° kapa 0.1 palo.
Boemo ba Phanele e ka Pele: IP64 (NEMA 3R).
Sephetho: 5/12 VDC (e itšetlehileng ka mohlala).
Boima ba 'mele: 2.3 oz (65 dikgerama).
Tumellano: CE, cRus.
| LENANE LA LIPHARAMETA (MEFUTSO EA TSOHLE FEELA) | |||
| Tlhaloso | Diyuniti | Range | |
| Lc He P1 H5 |
Boleng ba 4 mA input Boleng ba 20 mA input Ntlha ea boleng Khoutu ea ho kena |
Range Range Nomoro ea Khetho |
- lilemo tse 999 ho isa ho tse 999 - lilemo tse 999 ho isa ho tse 999 Che/e 0 ho ea ho 99 |
Litlhaloso tsa Parameter
Lc = Boleng ba 4 mA input
Haeba P1 = E, boleng bo bontšoa ka ntlha ea decimal
Hc = Boleng ba 20 mA input
Haeba P1 = E, boleng bo bontšoa ka ntlha ea decimal
P1 = Ntlha ea Decimal
Haeba P1= E, LC, Hc, le litekanyetso tsa probe li hlahisoa ka ntlha ea decimal
H5 = Khoutu ea phihlello ho li-parameter
Lenaneo la Parameter
- Tobetsa SET bakeng sa metsotsoana e 8. Boleng ba khoutu ea phihlello 00 bo bonts'oa ponts'o (yuniti e tla le khoutu e behiloeng ho 00 ho tsoa fekthering).
- Ka metsu ea UP le DOWN, khoutu e ka hlophisoa ho latela litlhoko tsa mosebelisi.
- Tobetsa SET ho kenya khoutu. Haeba khoutu e nepahetse, leibole ea pele ea parametha e bonts'oa ponts'o (Lc).
- Tsamaea ho paramethara e lakatsehang ka likonopo tsa metsu ea UP le DOWN.
- Tobetsa SET ho view boleng bo hlahang pontshong.
- Boleng bo ka fetoloa ka metsu ea UP le DOWN.
- Tobetsa ENTER ho kenya boleng le ho tsoa.
- Pheta ho fihlela li-parameter tsohle tse hlokahalang li fetotsoe.
- Tobetsa SET le DOWN ka nako e ts'oanang ho emisa ho etsa mananeo kapa ho ema motsotso o le mong 'me ponts'o e tla tsoa ka bo eona mokhoa oa ho etsa mananeo.
Hlokomela: Khoutu ea keyboard e ka khutlisoa ho ZERO ka ho tima molaoli le ho e bula hape ha u ntse u boloka senotlolo sa SET se tepeletse maikutlo.
Bontša Molaetsa
Pontšo hangata e bonts'a mocheso oa probe. Haeba ho na le phoso, ho tla bontšoa melaetsa e latelang:
- Er = Phoso ea memori
- 00 = Open probe
- — = Potoloho e khutšoanyane ea potoloho
©Copyright 2022 Dwyer Instruments, Inc.
DWYER INSTRUMENTS, INC.
PO BOX 373 • MICHIGAN CITY, INDIANA 46360, USA
Mohala: 219-879-8000
Fax: 219-872-9057
www.dwyer-inst.com
lengolo-tsoibila: info@dwyermail.com
Litokomane / Lisebelisoa
 |
Dwyer TID Series Mocheso-Tsamaiso Indicator [pdf] Buka ea Taelo TID Series Temperature-Process Indicator, TID Series, Thempeture-Process Indicator, Process Indicator, Indicator |
