MOEKETSI MOSEBETSI
DMK-25 PRO MIDI KEYBOARD
LIEKETSENG
Kea leboha ha u rekile Keyboard ea Donner DMK-25 PRO Midi!
DMK-25 PRO ke keyboard e kopaneng ea midi ka tsela e makatsang eo u ka e sebelisang ho laola software synthesizer kapa software ea DAW. Li-pads le keyboard tse utloang lebelo le nang le mesebetsi e fapaneng li etsa hore ho be bonolo ho qapa 'mino oa hau o ikhethileng hang ha pululelo e fihla. DMK-25 PRO e feto-fetohang le e bonolo ho sebetsa e tla ba molekane ea matla oa studio kapa s.tage litšoantšiso.
MEHATO YA TLHOKOMELO
Ka kopo bala lintlha tse latelang ka botlalo pele o sebetsa.
- Boloka le ho latela litaelo tsena.
- Se ke oa e boloka libakeng tse latelang: Letsatsi le tobileng, mocheso o phahameng, mongobo o feteletseng, lerōle le feteletseng, le ho thothomela ho matla.
- Se ke oa qhaqha kapa oa fetola sehlahisoa sena ho qoba kotsi ea mollo le motlakase.
- U se ke ua inela ka metsing kapa ua akhela metsi holim'a 'ona kapa ka har'a eona.
- Se ke oa beha sehlahisoa sena sebakeng se sa lekanang kapa sebakeng sefe kapa sefe se sa tsitsang.
- Pele o hloekisa sesebelisoa, tlosa thapo ea USB kamehla. Se ke oa hloekisa sehlahisoa ka lisebelisoa tse tšesaane, joala, kapa lik'hemik'hale tse tšoanang ho qoba ho fetoha ha 'mala.
- U se ke ua kenya lintho tse nyenyane ka har'a sehlahisoa.
- Nkolla sehlahisoa sena nakong ea lifefo tsa lehalima le ho se sebelise kalaka e telele.
LIKAROLOANA
- Keybhoto ea linotlolo tse 25 tse utloang lebelo.
- Mefuta e 16 ea sekala e fana ka khothatso e eketsehileng bakeng sa libapali.
- Thetsa selaete se nang le khanya, laola Pitch, le Modulation ka ho latellana.
- Ts'ebetso e matla ea NR/ARP e fana ka mekhoa e mengata ea ho theha 'mino.
- Mebala e mengata ea backlit pads bakeng sa ho theha li-beats le ho fetola mananeo.
- 4+4 likonopo tse abeloang, li-slider bakeng sa tokiso ea tokoloho.
- Ts'ebetso ea ho kenya le ho bapala, ha ho hlokahale hore ho kenngoe mokhanni.
- Likonopo tse 6 tsa lipalangoang tse abeloang.
- jack e tloaelehileng ea 3.5mm.
- U hloka feela thapo ea USB eo u ka khonang habonolo le kapele ho theha sistimi ea hau ea popo.
PHAKENG E KAKARETSA
| DMK-25 PRO Midi Keyboard | x 1 |
| USB e tloaelehileng MOFUTA-C | x 1 |
| Bukana ea Mosebelisi | x 1 |
RETHABILE MOSEBETSI
PELE PELE
(1) Pitch Touch Bar
(2) Modulation Touch Bar
(3) Konopo ea Lipalangoang
(4) Pad e abetsoeng
(5) Transpose+/- Konopo
(6) Konopo ea Pad Bank
(7) Pontšo ea OLED
(8) Konopo ea NR/ARP
(9) Octave+/- Konopo
(10) Knob e abetsoeng
(11) Slider e abetsoeng
(12) S Banka konopo
(13) K Banka konopo
(14) Senotlolo sa Mosebetsi
(15) Keyboard
PELE TS'OANE
(16) Sustain Jack
(17) Mofuta oa C USB Port
RETŠELISITSOE DAW SOFTWARE
DMK-25 PRO e tla bonts'a e le sesebelisoa sa ho kenya le se hlahisoang ho li-setting tsa DAW midi. Pele o qala ho qapa 'mino, o hloka ho seta DMK-25 PRO e le sesebelisoa sa ho kenya "MIDI Setup" ea DAW. Kamora ho seta sena, software ea hau e ka fumana lintlha le lintlha tsa taolo ho tsoa ho DMK 25PRO. (Ts'ebeliso e 'ngoe le e 'ngoe e etsa sena ka tsela e fapaneng, kahoo sheba bukana ea lisebelisoa tsa software bakeng sa litlhophiso. Haeba u na le lipotso, ka kopo ikopanye le litšebeletso tsa bareki.)
Lethathamo la software e khothaletsoang ea DAW ke le latelang:
- Ableton Live
- GarageBand
- Cubase/ Nuendo
- FL Studio
- Sebopeho sa maqhubu
- Maikutlo
- Cakewalk Sonar
- Tlhahlobo
- Lisebelisoa tsa Pro
- Studio One
- Mokotuli
- Kopana
- Lebaka
PHEPELO EA MOTLAKASE
Haeba o hokela DMK-25 PRO ea hau komporong ea hau ka USB, ha ho na motlakase o hlokahalang mme DMK-25 PRO ea hau e ka lefisoa ka kotloloho komporong ea hau. Leha ho le joalo, haeba u sebelisa DMK-25 PRO ntle le kou ea USB khomphuteng ea hau, u tla hloka phepelo ea motlakase e kantle (5V 500mA)
TS'EBETSO EA BASIC
(1) Joaloka molaoli oa MIDI, keyboard ha e hlahise molumo ka boeona ha e bapaloa. Sebakeng seo, e ka hokela software ea DAW khomphuteng bakeng sa popo kapa ea laola synthesizer ea software ho iPad ho etsa molumo.
(2) The “Taolo ea Mofani” software e u fa mokhoa o hlakileng le o hlakileng oa ho hlophisa melaetsa e fapaneng ea MIDI Ka kopo etela semmuso websebaka https://www.donnermusic.com ho jarolla.
1.QALA KA POTLAKO
(1) Hokela DMK-25 PRO khomphuteng ea hau u sebelisa thapo ea USB e fanoeng. Yuniti e tla fumana matla ebe e fetisetsa data ea MIDI ka khokahano ea USB.
(2) Hlophisa DAW ea hau kapa software ea sesebelisoa sa sebele ebe u seta DMK-25 PRO e le sesebelisoa sa MIDI Input le MIDI Output.
(3) E hokahane le DMK-25 PRO ka mokoloto oa kantle.
- USB Type-Cable
- Khomphuta
- Tšehetsa Pedal
2. MOSEBETSI OA PANEL
(1) Sustain Jack
Sebelisa jeke e tsitsitseng ea 3.5mm ho hokela DMK-25 PRO (haeba pedal jack ea hau e le 6.35mm, u ka reka adaptara e fetolang hore mosebetsi o etsoe)
(2) Mofuta oa C USB Port
Sebelisa thapo ea USB ho hokela komporo ea hau kapa lisebelisoa tse ling ho matlafatsa keyboard kapa phetiso ea data.
3. MOSEBETSI OA PELE
(1) Keyboard
DMK-25 PRO e na le linotlolo tse 25 tse mamelang lebelo la ho bapala le ho romella melaetsa ea lintlha. Linotlolo li ka boela tsa sebelisoa e le likhutšoane tsa ho fihlella liparamente ka mokhoa oa Edita, joalo ka: ho fetola mocha oa MIDI, ho fetola lebelo la karabo ea lebelo la keyboard, joalo-joalo.
(2) Pontšo ea OLED
- E bonts'a maikutlo a nako ea nnete a tlhaiso-leseling ea taolo.
- Kgutsufatso ya skrine: PROG-Program Preset; K-Knob; S-Slider; T-Konopo ea Lipalangoang.
- Pontšo ea OLED e tla kena boemong ba standby haeba ho se na ts'ebetso ka metsotso e 5.
(3) MOJARO
- 4 li-presets tsa lenaneo (PROG1-PROG4) le 1 RAM (Khetha e 'ngoe ea PAD 1-PAD 4 e le RAM). PROG1-PROG4 e ka boloka molaetsa o hlophisitsoeng oa midi bakeng sa tšebeliso e latelang ha RAM e sitoa ho boloka litlhophiso tse hlophisitsoeng.
- Tobetsa [PAD BANK] le [NR/ARP] ka nako e le 'ngoe ho kenya mokhoa oa ho kenya, skrine e tla bontša: "KE KHETHA".
– Tobetsa [PAD BANK] le [NR/ARP] ka nako e le nngwe, LED ya [PAD BANK] le [NR/ARP] e tla panya ha o ntse o tobetsa [PAD5] ho kenya PROG1. Tlosa konopo hore o phethe.
– Tobetsa [PAD BANK] le [NR/ARP] ka nako e le nngwe, LED ya [PAD BANK] le [NR/ARP] e tla panya ha o ntse o tobetsa [PAD6] ho kenya PROG2. Tlosa konopo hore o phethe.
– Tobetsa [PAD BANK] le [NR/ARP] ka nako e le nngwe, LED ya [PAD BANK] le [NR/ARP] e tla panya ha o ntse o tobetsa [PAD7] ho kenya PROG3. Tlosa konopo hore o phethe.
– Tobetsa [PAD BANK] le [NR/ARP] ka nako e le nngwe, LED ya [PAD BANK] le [NR/ARP] e tla panya ha o ntse o tobetsa [PAD8] ho kenya PROG4. Tlosa konopo hore o phethe.
(4) Pitch Touch Bar
- Tsamaisa mohala ona oa ho ama ho romella melaetsa ea pitch bend midi e ka laolang ho kobeha ha molumo oa molumo. Ho nyoloha ho tla eketsa molumo; ho e isa tlase ho tla fokotsa molumo.
- E ka etsoa 'mapa ka software ea DAW.
(5) Modulation Touch Bar
- Tsamaisa mohala ona oa ho ama ho romella melaetsa ea modulation midi e ka laolang bongata ba vibrato kapa tremolo molumong. Ho nyoloha ho tla eketsa vibrato; ho e isa tlase ho tla fokotsa vibrato.
- E ka etsoa 'mapa ka software ea DAW.
(6) Pad e abetsoeng (Pad 1-Pad 8) le Pad Bank
Pad e abetsoeng
- Lipampitšana tse amehang ka lebelo li ka hlophisoa ka mokhoa oa "EDIT" kapa "Donner Control" software.
- Ka mokhoa o ikhethileng, data ea MIDI e hlahisoang ke pad hangata e sebelisoa bakeng sa ho etsa meropa le liletsa tsa meropa. Sephetho sa kamehla bakeng sa li-percussion pads tse 8 ke tse latelang:
BANKA A
|
Pad |
Midi Note | CN ea kamehla |
| Pale ea 1 | C1 / 36 |
10 |
|
Pale ea 2 |
C#1 / 37 | 10 |
| Pale ea 3 | D1 /38 |
10 |
|
Pale ea 4 |
D#1 / 39 | 10 |
| Pale ea 5 | E1 /40 |
10 |
|
Pale ea 6 |
F1/41 | 10 |
| Pale ea 7 | F#1/42 |
10 |
|
Pale ea 8 |
G1/43 |
10 |
BANKA B
|
Pad |
Midi Note |
CN ea kamehla |
|
Pale ea 9 |
G#1 / 44 | 10 |
| Pale ea 10 | A1 / 45 |
10 |
|
Pale ea 11 |
A#1 /46 | 10 |
| Pale ea 12 | B1 /47 |
10 |
|
Pale ea 13 |
C2 / 48 |
10 |
|
Pale ea 14 |
C#2 / 49 | 10 |
| Pale ea 15 | D2/50 |
10 |
|
Pale ea 16 |
D#2 / 51 |
10 |
BANK C
|
Pad |
Midi Note | CN ea kamehla |
| Pale ea 17 | E2 /52 |
10 |
|
Pale ea 18 |
F2/53 | 10 |
| Pale ea 19 | F#2 /54 |
10 |
|
Pale ea 20 |
G2/55 | 10 |
| Pale ea 21 | G#2 / 56 |
10 |
|
Pale ea 22 |
A2 / 57 | 10 |
| Pale ea 23 | A#2/58 |
10 |
|
Pale ea 24 |
B2 / 59 |
10 |
Pad Bank
Tobetsa ho switjha BANK A/ BANK B/ BANK C/ (E tsamaellana le bofubedu, botala, le boputswa), ho na le diphedi tse 24 tseo o ka di hlophisang. CC ea kamehla ea Banka A ke 36-43, Banka B ke 44-51, 'me Banka C ke 52-59.
(7) Konopo ea Lipalangoang
Ea kamehla ke Loop/ Rewind/ Fast Forward/ Emisa / Bapala / REC/ empa o hlokomela hore konopo ea lipalangoang ea software ea DAW e hloka ho etsoa 'mapa ka letsoho. Ba ka boela ba abeloa ho laola li-parameter tse fapaneng ho Setup Mode, tse tšoanang le likonopo tsa ts'ebetso.
| Konopo ea Loop |
|
| Khutlisetsa morao / Konopo ea ho Fetela Pele |
|
| Konopo ea ho Emisa |
|
| Bapala Konopo |
|
| Konopo ea Rec |
|
(8) Knob e abetsoeng le K Bank
Knob e abetsoeng
- Li-knobs tse abeloang li ka etsoa 'mapa ke software ea DAW bakeng sa mesebetsi eo u batlang ho e laola.
- Konopo e hlophiseha ka bolokolohi 'me e hloka ho etsa 'mapa ka software ea DAW bakeng sa ho phethahatsa ts'ebetso.
K Bank
Tobetsa ho switjha BANK A/ BANK B/ BANK C/ (E tsamaellana le bofubedu, botala, le boputswa), ho na le Diknopo tse 12 tseo o ka di hlophisang. Banka ea kamehla ke K1-K4, Banka B ke K5-K8, 'me Banka C ke K9-K12.
(9) Slider e abetsoeng le S Bat
Slider e abetsoeng
- Li-slider tse abetsoeng li ka etsoa 'mapa ke software ea DAW bakeng sa mesebetsi eo u batlang ho e laola.
- The slider e ka hlophisoa ka bolokolohi 'me e hloka ho etsa' mapa ka software ea DAW bakeng sa ho phethahatsa ts'ebetso.
S Bank
Tobetsa ho switjha BANK A/ BANK B/ BANK C/ (E tsamaellana le bofubedu, botala, le boputswa), ho na le diselaete tse 12 tseo o ka di hlophisang. Banka ea kamehla ke S1-S4, Banka B ke S5-S8, 'me Banka C ke S9-S12.
(10) Latch
- Tobetsa [K BANK] le [S BANK] ka nako e le 'ngoe ho bulela latch/ho tima. Ka mokhoa oa arpeggio, haeba latch e kentsoe ts'ebetsong, lintlha life kapa life tseo u li bapalang lia lieha, 'me lintlha tsa tsona li lieha ho fihlela u lokolla lintlha tsohle tse nang le li-arpeggiated le ho bapala lintlha tse ncha. Tlhokomeliso: Latch e tla sebetsa ho mokhoa oa arpeggio feela.
(11) Octave -/Octave +
Ts'ebetso ea Octave e u lumella ho fetola molumo oa lintlha tse bapaloang holimo kapa tlase ke octave e le 'ngoe kapa ho feta.
- Octave holimo le Octave tlase, e feto-fetoha ka 4 octave (-4 ho +4 octave) ka ho latellana. Boleng ba kamehla ke 0.
- Tobetsa [OCTAVE +] ho phahamisa molumo oa lintlha ka octave e le 'ngoe. Tobetsa [OCTAVE -] ho theola molumo oa lintlha ka octave e le 'ngoe.
- Tobetsa [OCTAVE -] le [OCTAVE +] ka nako e ts'oanang o ka hlophisa kapele litlhophiso tsa octave tsa DMK-25 PRO.
(12) FETOHA -/TRANSPOSE +
Ts'ebetso ea transpose e u lumella ho fetola molumo oa lintlha tse bapaloang holimo kapa tlase ke semitone e le 'ngoe kapa ho feta.
- Semitone fatše le Semitone holimo, li-semitone tse 12 tse feto-fetohang (-12 ho ea ho +12 semitones) ka ho latellana. Boleng ba kamehla ke 0.
- Tobetsa [TRANSPOSE+] ho phahamisa molumo oa lintlha ka semitone e le 'ngoe Tobetsa [TRANSPOSE-] ho theola molumo oa lintlha ka semitone e le 'ngoe.
- Tobetsa [TRANSPOSE -] le [TRANSPOSE+] ka nako e ts'oanang o ka seta bocha litlhophiso tsa transpose tsa DMK-25 PRO.
(13) EDITA Mokhoa
Ka mokhoa ona, o ka hlophisa tšebetso ea keyboard, percussion pad, knob, le slider.
Bakeng sa mohlalaample, CC, CN, MODE, CURVE, AT e ka hlophisoa, 'me Scale le eona e ka khethoa.
1.Latela mehato ena (mekhahlelo ea phetoho e bontšoa skrineng):
Mohato oa 1:
Tobetsa [TRANSPOSE +] le [OCTAVE+] ka nako e le 'ngoe ho kenya mokhoa oa EDIT (lebone la morao le tla benya).
Mohato oa 2:
Khetha e 'ngoe ea litaba tse tsamaellanang (CC, CN, MODE, CURVE, AT, SCALE) keyboard eo u batlang ho e hlophisa.
Mohato oa 3:
Tobetsa keyboard, pad, knob, kapa selaete seo u batlang ho se fetola.
Mohato oa 4:
Fetola li-parameter ka ho potoloha K1, 'me qetellong u tobetse konopo ea "Enter" ho keyboard bakeng sa ho boloka, e tla bolokeha lenaneong la hona joale. Haeba u sa batle ho boloka, tobetsa konopo ea "EXIT" keyboard ho tsoa, litlhophiso tsa hau li ke ke tsa bolokoa ka nako ena.
2.Selelekela
CC
- Molaoli ea Tsoelang Pele, ona ke molaetsa oa MIDI o khonang ho fetisa mefuta e mengata ea boleng, hangata 0-127. (Ka mor'a moo e bitsoa CC).
- Boleng ba CC ba Pitch, modulation, pad, konopo ea lipalangoang, knob 1-knob 4, slider 1-slider 4 e ka hlophisoa.
CN
- Channel, sena se ka utloisisoa habonolo e le tsela, e sebelisoang ka kakaretso bakeng sa ho arola lentsoe, hangata 1-16. (Ka mor'a moo e bitsoa CN)
- Boleng ba CN ba Pitch, modulation, pad, konopo ea lipalangoang, knob 1-knob 4, slider 1-slider 4, le keyboard e ka hlophisoa.
MOKHOA
- Fetola mokhoa oa trigger oa li-pads le li-buttons tsa lipalangoang, ho na le mekhoa e 'meli e latelang:
- Toggle: E romela molaetsa oa eona e sa khaotse ha e tobetsoa ka lekhetlo la pele ebe e khaotsa ho o romela ha e tobetsoa hape. (Khanya ha o tobetse, tima ha o tobetse hape)
- Nakoana: E romela molaetsa oa eona e ntse e hatelloa ebe e khaotsa ho o romela ha e lokolloa. (Lebone ha le tobetse hakgutshwane, le tima ha le lokollwa)
KHABANE
- Mokhoa oa ho qobella: Ho na le matla a mane: a bonolo, a mahareng, a thata ebile a tletse. Pad le keyboard li ka hlophisoa.
NTHATENG TS'OA
- Bakeng sa pad, ka mor'a ho ts'oara pele, ho e hatella ka matla hape ho tla romela lipontšo tse tsoelang pele ho etsa hore lintlha li hlahise liphello tse ngata ha mosebetsi oa AT o nolofalitsoe.
SEKETSO
Khetha litekanyo tse 16 ka ho latellana
|
Sekala |
Lintlha |
| Chrom |
C #CD beEF #FG #GA bB B |
|
China 1 |
C, D, E, G, A |
| China2 |
C, bE, F, G, bB |
|
Japane1 |
C, bD, F, G, bB |
| Japane2 |
C, D, bE, G, bA |
|
Blues 1 |
C, bE, F, #F, G, bB |
| Blues 2 |
C, D, bE, E, G, A |
|
BeBop |
C, D, E ,F, G, A, bB, B |
| Molumo Oohle |
C, D, E, #F, #G, bB |
|
Bochabela bohareng |
C, bD, E, F, G, bA, B |
| Dorian |
C, D, bE, F, G, A, bB |
|
Lydiane |
C, D, E, #F, G, A, B |
| Harmonic e nyane |
C, D, bE, F, G, bA, B |
|
Nyenyane |
C, D, bE ,F, G, bA, bB |
| Sephrygian |
C, bD, bE, F, G, bA, bB |
|
Hung Min |
C, D, bE, #F, G, bA, B |
| Egepeta |
C ,bD, bE, E, G, bA, bB |
ETSOA
- Ka EDIT mode, tobetsa konopo ea "EXIT" ho tsoa ho EDIT mode le ho hlakola phetoho ho EDIT mode.
KENA
- Ka EDIT mode, tobetsa konopo ea "ENTER" ho tsoa ho EDIT mode le ho boloka liphetoho ho EDIT mode.
3.Se latelang ke ts'ebetso ea mohlalaamphanyane ho Edit mode
EX. 1: Fetola CC ea K1
Tlhokomeliso: Ha u lokisa K1, hoa hlokahala ho eketsa mohato. Kamora ho tobetsa CC/CN/AT/key keyboard, hoa hlokahala ho tobetsa konopo ea [NR/ARP] ho kenya leqephe la ho hlophisa la K1.
Mohato oa 1:
Tobetsa [TRANSPOSE +] le [OCTAVE+] ka nako e le 'ngoe ho kenya mokhoa oa EDIT. (lebone la morao le tla panya)
Mohato oa 2:
Khetha konopo ea CC keyboard.
Mohato oa 3:
Tobetsa konopo ea [NR /ARP], skrine e tla hlahisa leqephe la liphetoho bakeng sa K1.
Mohato oa 4:
Fetola K1 ho khetha boleng ba CC.
Mohato oa 5:
Qetellong tobetsa konopo ea "Enter" ho keyboard bakeng sa ho boloka, e tla bolokoa lenaneong la hona joale. Haeba u sa batle ho boloka, tobetsa konopo ea "EXIT" keyboard ho tsoa, litlhophiso tsa hau li ke ke tsa bolokoa ka nako ena.
EX 2: Fetola CN ea S1
Mohato oa 1:
Tobetsa [TRANSPOSE +] le [OCTAVE+] ka nako e le 'ngoe ho kenya mokhoa oa EDIT. (lebone la morao le tla panya)
Mohato oa 2:
Khetha konopo ea CN keyboard.
Mohato oa 3:
Tsamaisa S1 mme skrine se hlahisa leqephe la tokiso bakeng sa S1.
Mohato oa 4:
Fetola K1 ho khetha boleng ba CN.
Mohato oa 5:
Qetellong tobetsa konopo ea "Enter ho keyboard bakeng sa ho e boloka, e tla bolokoa lenaneong la hajoale. Haeba u sa batle ho boloka, tobetsa konopo ea "EXIT" keyboard ho tsoa, litlhophiso tsa hau li ke ke tsa bolokoa ka nako ena.
EX. 3: Fetola MOKHOA oa Pad le Konopo ea Lipalangoang
Mohato oa 1:
Tobetsa [TRANSPOSE +] le [OCTAVE+] ka nako e le 'ngoe ho kenya mokhoa oa EDIT (lebone la morao le tla benya).
Mohato oa 2:
Khetha konopo ea MODE keyboard.
Mohato oa 3:
Tobetsa PAD kapa Konopo ea Lipalangoang eo u batlang ho e fetola.
Mohato oa 4:
Fetola K1 ho khetha ea nakoana kapa toggle.
Mohato oa 5:
Qetellong tobetsa konopo ea "Enter" ho keyboard bakeng sa ho boloka, e tla bolokoa lenaneong la hona joale. Haeba o sa batle ho boloka, tobetsa konopo ea "EXIT' ho keyboard ho tsoa, litlhophiso tsa hau li ke ke tsa bolokoa hajoale.
EX. 4: Fetola CURVE ea Pad
Mohato oa 1:
Tobetsa [TRANSPOSE +] le [OCTAVE+] ka nako e le 'ngoe ho kenya mokhoa oa EDIT. (lebone la morao le tla panya)
Mohato oa 2:
Khetha konopo ea CURVE keyboard.
Mohato oa 3:
Tobetsa PAD eo u batlang ho e hlophisa.
Mohato oa 4:
Fetola K1 ho khetha e bonolo, e mahareng, e thata, kapa e tletseng.
Mohato oa 5:
Qetellong tobetsa konopo ea "Enter ho keyboard bakeng sa ho e boloka, e tla bolokoa lenaneong la hajoale. Haeba u sa batle ho boloka, tobetsa konopo ea "EXIT" ho keyboard ho tsoa, litlhophiso tsa hau li ke ke tsa bolokoa ka nako ena.
EX. 5: Fetola AT ea Pad
Mohato oa 1:
Tobetsa [TRANSPOSE +] le [OCTAVE+] ka nako e le 'ngoe ho kenya mokhoa oa EDIT. (lebone la morao le tla panya).
Mohato oa 2:
Khetha konopo ea AT ho keyboard.
Mohato oa 3:
Fetola K1 ho khetha ON/OFF.
Mohato oa 4:
Qetellong tobetsa konopo ea "Enter ho keyboard bakeng sa ho e boloka, e tla bolokoa lenaneong la hajoale. Haeba u sa batle ho boloka, tobetsa konopo ea "EXIT" keyboard ho tsoa, litlhophiso tsa hau li ke ke tsa bolokoa ka nako ena.
EX. 6: Fetola SAKALO sa Keyboard
Mohato oa 1:
Tobetsa [TRANSPOSE +] le [OCTAVE+] ka nako e le nngwe ho kenya EDIT mode .(lebone la morao le tla panya).
Mohato oa 2:
Khetha konopo ea SCALE keyboard.
Mohato oa 3:
Fetola K1 ho khetha SEKALE seo u se batlang.
Mohato oa 4:
Qetellong tobetsa konopo ea "Enter" ho keyboard bakeng sa ho boloka, e tla bolokoa lenaneong la hona joale. Haeba u sa batle ho boloka, tobetsa konopo ea "EXIT" keyboard ho tsoa, litlhophiso tsa hau li ke ke tsa bolokoa ka nako ena.
(14) NR/ARP
TEMPO, DIVISION, le SWING li tloaelehile mefuteng ea NR le ARP. (Lebone la morao le fetoha le letala ha le le maemong a NR ha le ntse le fetoha le leputsoa le le maemong a ARP.
NR
Lebitso le felletseng ke ELA HLOKO PHETA. Bakeng sa mohlalaample, haeba u tšoara Noutu ea C3 le G3 ka mokhoa ona, e tla li pheta khafetsa.
UP
Arpeggio e ntseng e nyoloha eo ho eona ho bapaloang kapa ho binoa ka tatellano ea ho nyoloha. Bakeng sa mohlalaample, C3E3G3, C3E3G3.
TLASE
Arpeggio e theohang eo ho yona dinoutu tse qapang lerata di bapalwang kapa di binwa ka tatellano e theohileng. Bakeng sa mohlalaample, G3E3C3 G3E3C3.
PHAHAMA/TLASE
Ho nyoloha le ho theoha arpeggio. Ka mokhoa ona, mongolo o hatisitsoeng o tla pheta ho eketseha ho tloha tlase ho ea holimo ebe o fokotseha ho tloha holimo ho ea tlase. Bakeng sa mohlalaample, C3E3G3G3E3C3, C3E3G3G3E3C3.
KHOPO
DMK-25 PRO e na le mokhoa oa chord o u lumellang hore u bapale chord ka monoana o le mong. Ena ke karolo e ntle e ncha e ka ntlafatsang mongolo oa hau le ho fa meloli ea hau botebo bo boholo.
TEMPO
Sebaka se fetotsoeng ke 30-240bpm, kamehla ke 120bpm.
KAROHANO
Tse sebelisoang ho khetha morethetho, ka ho latellana ke 1/4,1/4T,1/8,1/8T,1/16,1/16T,1/32,1/32T.
MOKHOA
E sebelisetsoa ho khetha morethetho oa ho bulela/ tima, moeli ke 1% -100%, 'me yuniti ke 1%.
1.Latela mehato ena ka mokhoa oa ARP
(mekhahlelo ea phetoho e bonts'oa skrineng):
Mohato oa 1: Tobetsa 'me u tšoare konopo ea [NR/ARP] ebe u emela 0.5s, lebone le ka morao le tla fetoha le lesoeu.
Mohato oa 2: Khetha e 'ngoe ea litaba tse tsamaellanang (UR DOWN, UP/TOWN, CHORD) keyboard eo u batlang ho e hlophisa.
(Etsa bonnete ba hore o tobetsa le ho tšoara konopo ea [NR/ARP] nakong ea ts'ebetso)
Mohato oa 3: Paled TEMPO/DAVISON/SWING keyboard eo u batlang ho e fetola.
Mohato oa 4: Fetola liparamente ka ho potoloha K1.
Mohato oa 5: Tobetsa konopo ea [NR/ARP] hape ho tsoa mokhoa.
2.Latela mehato ena ka mokhoa oa NR
(mekhahlelo ea phetoho e bonts'oa skrineng):
Mohato oa 1: Tobetsa 'me u tšoare konopo ea [NR/ARP] ebe u emela 0.5s, lebone le ka morao le tla fetoha le lesoeu.
Mohato oa 2: Paled TEMPO/DAVISON/SWING keyboard eo u batlang ho e fetola.
(Etsa bonnete ba hore o tobetsa le ho tšoara konopo ea [NR/ARP] nakong ea ts'ebetso)
Mohato oa 3: Fetola liparamente ka ho potoloha K1.
Mohato oa 4: Tobetsa konopo ea [NR/ARP] hape ho tsoa mokhoa.
3.Se latelang ke ts'ebetso ka mokhoa oa NR/ARP
Ho hlophisa CHORD
Mohato oa 1: Tobetsa 'me u tšoare konopo ea [NR/ARP], lebone le ka morao le tla soeufala.
Mohato oa 2: Khetha konopo ea CHORD keyboard, 'me skrine se hlahisa leqephe la liphetoho bakeng sa CHORD.
Mohato oa 3: Lokolla konopo ea [NR/ARP], mokhoa oa CHORD oa lumelloa ha konopo ea [NR/ARP] e putlama.
Mohato oa 4: Hang ha u le mokhoeng oa CHORD, tobetsa 'me u tšoare likonopo tsa [OCTAVE+] le [S Bank] ka nako e le' ngoe, 'me lebone le ka morao le tla soeufala ha skrine se hlahisa "DEFINE CHORD".
Mohato oa 5: Bapala chord note eo u e batlang ho keyboard ha u ntse u tobetsa le ho tšoara [OCTAVE+] le [S Bank].
Mohato oa 6: Lokolla likonopo tsa [OCTAVE+] le [S Bank] ka mor'a ho qeta ho hlophisa li-chord.
Mohato oa 7: Tobetsa konopo ea [NR/ARP] ho tsoa ka mokhoa oa CHORD.
Bakeng sa mohlalaampLe:
Haeba u batla ho bapala chord e bonolo ea linoto tse 2 ka mokhoa oa Chord tobetsa ebe u tšoara likonopo tsa [OCTAVE+] le [S Bank] ka nako e le 'ngoe ka mokhoa oa CHORD ha u ntse u bapala linoto tsa C le G keyboard, ebe u lokolla [ OCTAVE+] le likonopo tsa [S Bank], ka nako ena noto e tlase ka ho fetisisa ea Chord e tla lula e le motso oa noto, ho latela mongolo o kentsoeng E tla fetolela noto e ncha eo u e bapalang ka bo eona.
Ho fetola TEMPO
Mohato oa 1: Tobetsa 'me u tšoare konopo ea [NR/ARP], lebone le ka morao le tla soeufala.
Mohato oa 2: Khetha konopo ea TEMPO keyboard.
Mohato oa 3: U ka seta TEMPO ka ho otla konopo ea TEMPO ka makhetlo a mararo ka potlako kamoo u batlang, kapa ka ho potoloha K1.
(etsa bonnete ba hore o tobetsa le ho tšoara konopo ea [NR/ARP] nakong ea ts'ebetso)
Ho hlophisa KAROHO
Mohato oa 1: Tobetsa 'me u tšoare konopo ea [NR/ARP], lebone le ka morao le tla soeufala.
Mohato oa 2: E patile konopo ea DIVISION keyboard.
Bohato ba 3: E petetsa mofuta oa mongolo oa morethetho ka ho potoloha K1.(etsa bonnete ba hore o tobetsa le ho tšoara konopo ea [NR/ARP] nakong ea ts'ebetso)
Ho hlophisa SWING
Mohato oa 1: Tobetsa 'me u tšoare konopo ea [NR/ARP], lebone le ka morao le tla soeufala.
Mohato oa 2: Khetha konopo ea SWING keyboard.
Mohato 3: Tobetsa konopo ea SWING ho bulela/ tima.
Mohato oa 4: Khetha palotage mofuta oa morethetho o sisinyehang ka ho potoloha Kl. (etsa bonnete ba hore o tobetsa le ho tšoara konopo ea [NR/ARP] nakong ea ts'ebetso)
(15) Khutlisa Setlhophiso sa Fektheri
Ho khutlisetsa litlhophiso tsa feme ho tla hlakola data eohle le ho e khutlisetsa boemong ba eona ba kamehla, ka kopo latela mehato e ka tlase:
- Etsa bonnete ba hore thapo ea USB ea DMK-25 PRO e hokahane hantle
- Tobetsa [K BANK] le [OCTAVE-] ka nako e le 'ngoe,' me lebone le ka morao le tla benya.
(Skrine e tla bonts'a lintlha tsa reset) - DMK-25 PRO e tla khutlisetsoa ho litlhophiso tsa feme ka 3s ho latela molaetsa oa skrineng, haeba u batla ho hlakola ts'ebetso ena, tobetsa konopo ea [K BANK] kapa [OCTAVE-] ho tsoa nakong ea 3s.
LIEKETSENG TS'OANELO
| Kakaretso | |
| Mofuta | Donner DMK-25 PRO Midi Keyboard |
| Palo ea Linotlolo tsa Keyboard | 25 Linotlolo |
| Pontšo | OLED |
| Li-Pads tse abetsoeng | 8 Lipapali |
| Li-slider tse abetsoeng | 4 Li-slider |
| Li-Knobs tse abetsoeng | 4 Likotola |
| Likonopo tsa Mosebetsi | 8 Likonopo |
| Likonopo tsa Lipalang | 6 Likonopo |
| Lintho tse kenang | |
| USB | USB Type-C, 5V 500mA |
| Tšehetsa Kenyeletso | 3.5 limilimithara Jack |
| Litekanyo | 337 x 183 x 26 limilimithara |
| Boima ba 'mele | 0.68 KG |
TLHOKOMELO FCC
Liphetoho kapa litokiso tse sa lumelloeng ka ho hlaka ke mokha o ikarabellang bakeng sa ho lumellana le melaoana li ka hlakola matla a basebedisi a ho sebelisa thepa.
Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa tšebeliso 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka khethoang ka ho tima sesebelisoa le mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:
— Suthisa lenakana kapa o suthise sebakeng se seng.
- Eketsa karohano lipakeng tsa sesebelisoa le moamoheli.
- Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
- Ikopanye le morekisi kapa setsebi se nang le boiphihlelo sa seea-le-moea/TV bakeng sa thuso.
Sesebelisoa sena se lumellana le karolo ea 15 ea melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang (1) sesebelisoa sena se ke ke sa baka tšitiso e kotsi, 'me (2) sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a FCC e behiloeng bakeng sa tikoloho e sa laoleheng. Thepa ena e lokela ho kengoa 'me e sebetsoe ka sebaka sa bonyane 20cm lipakeng tsa radiator le 'mele oa hau.
KABELO LENANEO
Tafole e latelang e bonts'a li-parameter tsa kamehla tsa mochini o mong le o mong oa mochini o thehiloeng ho Standard MIDI, o thathamisa mefuta e mengata ea litlhophiso tse fumanehang bakeng sa module ka 'ngoe ea CC le CN le litekanyetso tsa bona tsa kamehla.
|
Yuniti |
Boemo ba Channel | Tsela e ikhethileng | Abela Range |
Abela ka kamehla |
| TS'ELISO |
1-16 |
1 (Lefatšeng lohle) |
0-128 |
128 (Sekhahla) |
| MOEKETSI MOHAPI |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
1 (Ho feto-fetoha ha molumo) |
| PAD1 (TLHOKOMELISO)(BANK A) |
1-16 |
10 (Moropa) |
0-127 |
36 |
| PAD2 (TLHOKOMELISO)(BANK A) |
1-16 |
10 (Moropa) |
0-127 |
37 |
| PAD3 (TLHOKOMELISO)(BANK A) |
1-16 |
10 (Moropa) |
0-127 |
38 |
| PAD4 (TLHOKOMELISO)(BANK A) |
1-16 |
10 (Moropa) |
0-127 |
39 |
| PAD5 (TLHOKOMELISO)(BANK A) |
1-16 |
10 (Moropa) |
0-127 |
40 |
| PAD6 (TLHOKOMELISO)(BANK A) |
1-16 |
10 (Moropa) |
0-127 |
41 |
| PAD7 (TLHOKOMELISO)(BANK A) |
1-16 |
10 (Moropa) |
0-127 |
42 |
| PAD8 (TLHOKOMELISO)(BANK A) |
1-16 |
10 (Moropa) |
0-127 |
43 |
| PAD1 (TLHOKOMELISO)(BANK B) |
1-16 |
10 (Moropa) |
0-127 |
44 |
| PAD2 (TLHOKOMELISO)(BANK B) |
0-16 |
10 (Moropa) |
0-127 |
45 |
| PAD3 (TLHOKOMELISO)(BANK B) |
1-16 |
10 (Moropa) |
0-127 |
46 |
| PAD4 (TLHOKOMELISO)(BANK B) |
1-16 |
10 (Moropa) |
0-127 |
47 |
| PAD5 (TLHOKOMELISO)(BANK B) |
1-16 |
10 (Moropa) |
0-127 |
48 |
| PAD6 (TLHOKOMELISO)(BANK B) |
1-16 |
10 (Moropa) |
0-127 |
49 |
| PAD7 (TLHOKOMELISO)(BANK B) |
1-16 |
10 (Moropa) |
0-127 |
50 |
| PAD8 (TLHOKOMELISO)(BANK B) |
1-16 |
10 (Moropa) |
0-127 |
51 |
| PAD1 (TLHOKOMELISO)(BANK C) |
1-16 |
10 (Moropa) |
0-127 |
52 |
| PAD2 (TLHOKOMELISO)(BANK C) |
0-16 |
10 (Moropa) |
0-127 |
53 |
| PAD3 (TLHOKOMELISO)(BANK C) |
1-16 |
10 (Moropa) |
0-127 |
54 |
| PAD4 (TLHOKOMELISO)(BANK C) |
1-16 |
10 (Moropa) |
0-127 |
55 |
| PAD5 (TLHOKOMELISO)(BANK C) |
1-16 |
10 (Moropa) |
0-127 |
56 |
| PAD6 (TLHOKOMELISO)(BANK C) |
1-16 |
10 (Moropa) |
0-127 |
57 |
| PAD7 (TLHOKOMELISO)(BANK C) |
1-16 |
10 (Moropa) |
0-127 |
58 |
| PAD8 (TLHOKOMELISO)(BANK C) |
1-16 |
10 (Moropa) |
0-127 |
59 |
| LIKONANE |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
15-20 |
| K1 (BANK A) |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
30 |
| K2 (BANK A) |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
31 |
| K3 (BANK A) |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
32 |
| K4 (BANK A) |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
33 |
| K1 (BANK B) |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
34 |
| K2 (BANK B) |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
35 |
| K3 (BANK B) |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
36 |
| K4 (BANK B) |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
37 |
| K1 (BANK C) |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
38 |
| K2 (BANK C) |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
39 |
| K3 (BANK C) |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
40 |
| K4 (BANK C) |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
41 |
| S1~S4 (BANKA/B/C) |
1-16 |
1-12 |
0-127 |
7 (Moqolo) |
| PEDELE |
1-16 |
1 (Lefatšeng lohle) |
0-127 |
64 (Tsehetsa) |
| KENYA |
1-16 |
1 |
- |
- |
Lengolo-tsoibila: service@donnermusic.com
www.donnermusic.com
Copyright @ 2022 Donner Technology. Litokelo tsohle li sirelelitsoe.
TŠEBELETSO PUO
SESOTHO
_____________________________________
KHABANE
Mohala: 001 571 3705977
UNITED KINGDOM
Mohala: 0044 2080 895 663
_____________________________________
KANANELA
Mohala: 001 613 4168166
AUSTRALIA
Mohala: 0061 384004871
Ikopanye le lits'ebeletso tsa rona tsa bareki ka nako ea lehae (lihora tsa mohala li thathamisitsoe ho ofisiri ea Donner websaete)
E entsoe chaena
Litokomane / Lisebelisoa
 |
DONNER DMK25 Pro MIDI Keyboard Controller [pdf] Bukana ea Mosebelisi DMK25 Pro MIDI Keyboard Controller, DMK25 Pro, MIDI Keyboard Controller, Keyboard Controller |
