Danfoss S2X Microcontroller

Litlhaloso
Tlhaloso
Danfoss S2X Microcontroller ke taolo ea li-loop tse ngata e etselitsoeng lits'ebetso tsa sistimi ea taolo ea mebileng e kantle ho tsela. E thatafalitsoe ke tikoloho ka matla a ho laola litsamaiso tse ngata tsa electrohydraulic ka boikemelo kapa e le karolo ea marang-rang.

Likaroloana

• Lebelo la karabelo le bokhoni ba ho laola litsamaiso tse peli tsa hydrostatic propel
• Ts'ehetso bakeng sa lebelo le koetsoeng, matla a lipere, le litsamaiso tsa taolo ea maemo
• Khokahano e nang le li-sensor tse fapaneng tsa analog le tsa dijithale
• Re-programmable firmware bakeng sa ho feto-fetoha ha mesebetsi ea lisebelisoa
• Aluminium die-cast housing e nang le likhokahanyo tse tharo tsa likhokahanyo tsa motlakase

Lintlha tsa Tekheniki

• Litlhahiso tse 4 tsa Analog (0 ho isa ho 5 Vdc)
• 4 Speed ​​​​Sensors (dc-coupled)
• Sensor ea lebelo e 1 (e kopane)
• 9 Litlhahiso tsa Digital (DIN)

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho kenya

1. Netefatsa hore motlakase o timme pele o kenya.
2. Hokela lihokelo tsa P1 le P2 likoung tse loketseng ho molaoli.
3. Sebelisa sehokelo sa P3 bakeng sa likhokahano tsa RS232.

Ho kenya Firmware

1. Khoasolla khoutu ea firmware e lakatsehang komporong ka boema-kepe ba RS232.
2. Latela litaelo ho kenya firmware ho S2X Microcontroller.

Khokahano ea Sensor

1. Hokela li-sensor tsa analog ho li-analog tse khethiloeng.
2. Hokela li-sensor tsa lebelo ho likou tsa sensor tse tsamaisanang le lebelo.
3. Sebelisa lisebelisoa tsa dijithale bakeng sa ho beha leihlo maemo a switjha a kantle.

LBH

• Q: Na S2X Microcontroller e ka hlophisoa bocha tšimong?
  A: E, bobeli ba fektheri le mananeo a tšimong a ka khoneha, a lumella ho fetoha ha maemo mesebetsing ea lisebelisoa.
• Q: Ke mofuta ofe oa li-sensor o ka hokahanngoa le S2X Microcontroller?
  A: Mookameli a ka sebelisana le li-analog sensors tse kang potentiometers, li-sensor tsa Hall-effect, lisebelisoa tsa khatello, hammoho le lisebelisoa tsa lebelo le li-encoder.
• Q: Ke palo e phahameng ka ho fetisisa ea loops ea servo e ka sebelisoang le S2X Microcontroller?
  A: Ho ka sebelisoa li-loops tse 'nè tsa bi-directional servo ka S2X Microcontroller.

TLHALOSO

• Danfoss S2X Microcontroller ke molaoli oa li-loop tse ngata tse thatafalitsoeng tikolohong bakeng sa lits'ebetso tsa sistimi e tsamaeang le tsela e kholo. S2X Microcontroller e na le lebelo la ho arabela le bokhoni ba ho laola mekhoa e mengata ea ho laola motlakase oa motlakase ebang ke molaoli ea ikemetseng kapa o kopantsoe le balaoli ba bang ba tšoanang le bona ka tsamaiso ea lebelo le phahameng la Controller Area Network.
• S2X e loketse hantle lisistimi tsa hydrostatic propel tse peli tse kenyelletsang lebelo le koalehileng le taolo ea matla a lipere. Ho feta moo, lits'ebetso tsa taolo ea maemo a koalehileng tse sebelisang li-servovals le li-valve tsa taolo ea phallo li fihlelleha habonolo. Ho ka sebelisoa li-loops tse 'ne tsa bi-directional servo.
• Mookameli a ka sebelisana le mefuta e mengata e fapaneng ea li-analog le li-digital sensors tse kang potentiometers, li-sensor tsa Hall-effect, li-sensors tsa khatello, li-pickups le li-encoder.
• Tšebeliso ea likarolo tsa I/O le liketso tsa taolo tse entsoeng li hlalosoa ke firmware e kentsoeng mohopolong oa lenaneo la S2X. Firmware e atisa ho kenngoa ka ho khoasolla khoutu e lakatsehang khomphuteng e 'ngoe ka boema-kepe ba RS232. Re programmability e fana ka boemo bo phahameng ba ho feto-fetoha ha ts'ebetso ea sesebelisoa. Hoa khoneha ho etsa mananeo a fektheri kapa a tšimong.
• Molaoli oa S2X o na le kopano ea boto ea potoloho ka har'a ntlo ea aluminium die-cast. Lihokelo tse tharo, tse khethiloeng e le P1, P2 le P3 li fanoe bakeng sa likhokahano tsa motlakase. P1 (30 pin) le P2 (18 pin) ke tsona tse ka sehloohong tsa I/O le lihokelo tsa matla; hammoho ba kopana le hloohoana e 48 e kentsoeng lepolanka, e hlahellang ka tlas'a sebaka se kampetsoeng. P3 ke sehokelo se chitja sa likhokahano tsa RS232 tse kang reprogramming, displays, printers and terminals.

LIKAROLOANA

• Bokhoni ba ho laola li-loop tse ngata bakeng sa taolo ea 4 bidirectional servo loops kapa 2 bidirectional le 4 unidirectional loops.
• 16-bit Intel 8XC196KC microcontroller e matla:
  • ka potlako
  • tenyetsehang
  • e laola mesebetsi e mengata ea mochini e nang le likarolo tse fokolang.
• Controller Area Network (CAN) e fana ka likhokahano tsa serial tsa lebelo le holimo ka lisebelisoa tse ling tse 16 tse tsamaellanang le CAN mme e fihlela litlhoko tsa lebelo la lintlha tsa SAE network Class C.
• Ntlo e matsutla ea aluminium ea die-cast e mamella maemo a thata a tikoloho ao hangata a fumanoang lits'ebetsong tsa mehala.
• Pontšo ea LED e nang le litlhaku tse 'ne e fana ka leseli bakeng sa ho seta, ho lekanya, le mekhoa ea ho rarolla mathata.
• Memori ea Flash e fumaneha ka har'a port e inehetseng ea RS232. E lumella ho etsa mananeo ntle le ho fetola li-EPROM.
• Motlakase o thata o sebetsa holim'a mefuta e felletseng ea 9 ho isa ho 36 Volts e nang le betri e ka morao, ea nakoana e fosahetseng, le ts'ireletso ea thotobolo.
• Sehokelo sa boema-kepe sa RS232 se loketseng bakeng sa puisano ea data le lisebelisoa tse ling joalo ka li-display, liprinta, litheminale, kapa likhomphutha tsa hau.
• E ka atolosoa ka sehokelo sa ka hare sa 50-pin bakeng sa liboto tsa cus-tom I/O.

TAELO TSEBISO

• Bakeng sa tlhaiso-leseling e felletseng ea lisebelisoa tsa software le software, ikopanye le feme. Nomoro ea ho odara ea S2X e abela hardware le software ka bobeli.
• Bakeng sa tlhaiso-leseling ea sebopeho sa sehlahisoa bona leqephe la 5.
• Sehokelo sa Mating I/O: odara Karolo ea Nomoro K12674 (kopano ea mokotla)
• Mating RS232 Connector: oda Karolo ea Nomoro K13952 (kopano ea mokotla)

LIEKETSENG SOFTWARE

Moralo oa software oa S2X o etselitsoe ho sebelisa lisebelisoa tsa boenjiniere tsa morao-rao tsa software tsa Danfoss ho kenyelletsa sistimi ea ts'ebetso ea Kernel, Lintho le Liphutheloana tsa Danfoss, le WebSehokelo sa graphical sa GPI. Danfoss software engineering methodology e lumella ho tsamaisoa ha software ho pholletsa le li-microcontroller platforms le ho thusa boenjiniere bo potlakileng ba mekhoa e mengata ea ho laola mochine oa selefouno ho akarelletsa:

• Enjene anti-stall and load controls
• Taolo ea likoloi
• Thuso ea mabili
• Taolo ea lebelo la loop e koetsoeng
• Ho laola khatello
• Taolo ea litsela tse peli tse koetsoeng
• Taolo ea maemo joalo ka bophahamo ba mochini, tšupiso ea matla a khoheli le boemo bo hokahaneng ba silinda
• Taolo ea ho tsamaisa likoloi le litlhoko tse hokahaneng tsa setataiso
• Taolo ea sekhahla sa kopo
• Marang-rang

LIEKETSENG MOTS'OANE

LITLHAKISO

• 4 Analog (DIN 0, 1, 2, 3) (0 ho 5 Vdc) -e reretsoeng ho kenya lisebelisoa tsa sensor (10 bit resolution). E sirelelitsoe khahlano le marikhoe a makhutšoane ho ea fatše.
• 4 Speed ​​​​Sensors (PPU 0, 1, 2, 3) (dc-coupled) -bakeng sa tšebeliso e nang le boemo bo tiileng ba li-pickups le li-encoder tsa boemo bo tiileng, leha e le efe ea tsona e ka hlophisoa e le lisebelisoa tsa analoge ka kakaretso.
• 1 Speed ​​​​Sensor (PPU 4) (ac-coupled) - bakeng sa ho sebelisoa le li-alternator kapa li-pickups tsa ho tsilatsila tse fapaneng.
• g Digital Inputs (DIN) -bakeng sa ho lekola boemo ba ho switjha kantle bakeng sa ho hula (ho fihla ho 32 Vdc) kapa ho theola (ho <1.6 Vdc).
• 4 Optional Membrane Switches (DIN 12) -e fumaneha sefahlehong sa matlo.

LIEKETSO

• 2 Low Current - li-driver tsa morao-rao tsa bidirectional (± 275 mA palo e ka holimo ho mojaro oa 20 ohm). E sirelelitsoe bakeng sa marikhoe a makhutšoanyane ho ea fatše.
• 4 Hona joale e Phahameng - 3 amp bakhanni, ebang ON/OFF kapa tlas'a taolo ea PWM.Tsena li ka sebelisoa ho khanna 12 kapa 24 Vdc on/off solenoids, servo valves kapa proportional valves. Potoloho e khuts'oane e lekanyelitsoe ho 5 amps.
• Pontšo ea boikhethelo

TS'ELISO

• Controller Area Network (CAN) bakeng sa likhokahano le lisebelisoa tse ling tse sebeletsanang le CAN. E tšehetsa litekanyetso tsa CAN 2.0A/ 2.0B
• Boema-kepe ba RS232 bo hokahaneng ka sehokelo sa 6-pin MS.

PHEPELO EA MOTLAKASE

• Moqtage fapaneng 9 ho 36 Vdc.
• 5 Vdc regulator bakeng sa matla a sensor a kantle (ho fihla ho 0.5 amp) e sirelelitsoeng ka nako e khutšoane.

KHOPOTSO

• Sheba Sebopeho sa Hardware, leqepheng la 5.

Li-LED

• Pontšo ea LED ea litlhaku tse 4 tsa alphanumeric; sebopeho se seng le se seng ke matrix a matheba a 5x7.
• 2 Lits'oants'o tsa LED, LED e le 'ngoe e sebelisoa e le sesupo sa matla, e 'ngoe ea LED e tlas'a taolo ea software bakeng sa tšebeliso e le sesupo sa phoso kapa boemo.

LIKHOKELO MOTLATSI

• Metri-Pak I/O e kopantsoeng le boto ea lipini tse 48 e nang le sehokelo sa thapo sa 30-pin le 18-pin.
• Sehokelo sa MS se chitja sa 6-pin bakeng sa puisano ea RS232.

TIKOLOHO

• TS'EBETSO MOCHESO -40°C ho ea +70°C (-40° F ho ea ho 158° F)

MOSOLA

• E sireleditswe kgahlanong le 95% ya mongobo o lekanyeditsweng le diwashdowns tse nang le kgatello e phahameng

TSIETSO

• 5 ho isa ho 2000-Hz e nang le resonance e lula bakeng sa lipotoloho tse milione e le 'ngoe bakeng sa ntlha e' ngoe le e 'ngoe ea resonant e tlohang ho 1 ho isa ho 1 gs.

TSOSOA

• 50 gs bakeng sa 11 ms ho lilepe tsohle tse 3 bakeng sa kakaretso ea litšisinyeho tse 18

MOTLATSI

• E mamella li-circuits, reverse polarity, over voltage, moqtage transients, static dischages, EMI/RFI le load dump.

LIEKETSENG

Litekanyo ka limilimithara (Inches).
Danfoss o khothalletsa hore ho kenngoe selaoli se tloaelehileng hore se be sefofaneng se otlolohileng 'me lihokelo li shebile fatše.

LIKHOPI LINAKO

SEBOPEHO SEHOLO

TŠEBELETSO EA BAREKI

AMERIKA E LEBOEA
TAELO TSOA

• Khampani ea Danfoss (US).
• Lefapha la Tšebeletso ea Bareki
• 3500 Annapolis Lane North
• Minneapolis, Minnesota 55447
• Mohala: 763-509-2084
• Fax: 763-559-0108

TS'OATSO MOSEBETSI

• Bakeng sa lisebelisoa tse hlokang ho lokisoa, kenyelletsa tlhaloso ea bothata, kopi ea taelo ea theko le lebitso la hau, aterese le nomoro ea mohala.

RETS'ELISITSOE HO

• Khampani ea Danfoss (US).
• Lefapha la Khutlisa Thepa
• 3500 Annapolis Lane North Minneapolis, Minnesota 55447

ULAYA
TAELO TSOA

• Danfoss (Neumünster) GmbH & Co. Lefapha la ho Kena la Order
• Krokamp 35
• EA-2460-TL
• D-24531 Neumünster
• Jeremane
• Mohala: 49-4321-8710
• Fax: 49-4321-871355

Litokomane / Lisebelisoa

Danfoss S2X Microcontroller [pdf] Litaelo S2X Microcontroller, S2X, Microcontroller

Litšupiso

• Bukana ea Mosebelisi