Danfoss Optyma Plus SW Ver. 3.7x Controller for Condensing Unit
Selelekela
Kopo
Taolo ea yuniti e koenyang
Advantages
- Taolo e kokobetsang kgatello mabapi le mocheso o kantle
- Taolo ea lebelo la fan
- Taolo ea ho tima/e tima kapa e feto-fetohang ea lebelo la konpresser
- Taolo ea lintho tse futhumatsang ka har'a crankcase
- Ts'ebetso ea taolo ea motšehare / bosiu
- Ts'ebetso ea oache e kentsoeng kahare e nang le pokello ea matla
- Puisano ea data ea Modbus e hahiloeng kahare
- Tlhokomelo ea mocheso oa ho ntša mocheso td
- Taolo ea taolo ea ho khutla ha oli ka taolo ea lebelo le fapaneng
Molao-motheo
- Molaoli o fumana lets'oao la ho pholisa ho batloang, ebe o qala kompressor.
- Haeba konpresser e laoloa ke lebelo le feto-fetohang, khatello ea ho hula (e fetoletsoeng ho mocheso) e tla laoloa ho latela boleng ba mocheso o behiloeng.
- Taolo ea khatello ea Condenser e etsoa hape ho latela lets'oao le tsoang ho sensor ea mocheso o teng le referense e behiloeng. Mookameli o tla laola fan, e lumellang hore mocheso o fokolang o bolokehe ka boleng bo lakatsehang. Mookameli a ka boela a laola ntho e futhumatsang ka har'a crankcase e le hore oli e lule e arohane le sehatsetsing.
- Bakeng sa mocheso o feteletseng oa ho tsoa, ente ea mokelikeli e tla kenngoa moleng oa ho hula (bakeng sa li-compressor tse nang le khetho ea ente ea metsi).
Mesebetsi
- Taolo ea mocheso oa condensing
- Taolo ea lebelo la fan
- Taolo ea ho tima / ho tima kapa taolo ea lebelo la komporo
- Taolo ea lintho tse futhumatsang ka har'a crankcase
- Ente ea mokelikeli koung ea economizer (haeba ho khonahala)
- Ho phahamisa tšupiso ea taolo ea khatello ea condenser nakong ea ts'ebetso ea bosiu
- Qala ka ntle / emisa ka DI1
- Ho khaola ts'ireletso ho kentsoe tšebetsong ka lets'oao le tsoang ho taolo ea polokeho ea othomathike
Regulation reference for condensing the temperature
- Molaoli o laola Reference e khutsufatsang, e leng ka ho qaqileng phapang pakeng tsa mocheso o fokolang le mocheso o potolohileng. Sebaka sa litšupiso se ka bontšoa ka ho tobetsa hakhutšoanyane konopo e bohareng ebe e lokisoa ka konopo e ka holimo le e tlase. Litšupiso li ka phahamisoa bosiu ho lumella lebelo le liehang la fan ho fokotsa lerata la fan. Sena se etsoa ka "night set back" tšobotsi.
- Setlhophiso sena se ka fetoloa ntle le ho kenya mokhoa oa ho etsa mananeo kahoo ho lokela ho hlokomeloa hore u se ke ua itokisa ka boomo.
Motšehare/Bosiu
- Taolo e na le ts'ebetso ea oache ea kahare e fetohang lipakeng tsa ts'ebetso ea motšehare le bosiu.
- Nakong ea ts'ebetso ea bosiu, referense e hlahisoa ke boleng ba 'Night offset'.
Letšoao lena la motšehare/bosiu le lona le ka sebelisoa ka litsela tse ling tse peli:
- Ka lets'oao la ho kenya / ho tima - DI2
- Ka puisano ea data.
Ts'ebetso ea fan
Molaoli o tla laola fene e le hore mocheso oa condensing o bolokoe ka boleng bo lakatsehang ho feta mocheso oa kantle.
Mosebelisi a ka khetha mekhoa e fapaneng ea ho laola fan:
- Taolo ea lebelo ka hare
Mona fan e laoloa ka lebelo ka terminal 5-6.
Ha ho hlokahala 95% ho ea holimo, relay ho terminal 15-16 e ea sebetsa, ha 5-6 e sa sebetse. - Taolo ea lebelo la kantle
Bakeng sa li-motor tse kholo tse nang le phallo e sa lekaneng ea kahare, taolo ea lebelo ea kantle e ka hokahanngoa le terminal 54-55. Letšoao la 0 - 10 V le bontšang lebelo le lakatsehang le romeloa ho tloha ntlheng ena. Relay ho terminal 15-16 e tla sebetsa ha fene e sebetsa.
- Ho menu ea 'F17' mosebelisi a ka hlalosa hore na ke litsamaiso life tse peli tseo a lokelang ho li sebelisa.
Lebelo la fan qalong
Ha fene e qalisoa hape ka mor'a nako e sa sebetseng, e tla qalisoa ka lebelo le behiloeng ts'ebetsong ea 'Jog Speed'. Lebelo lena le bolokoa ka metsotsoana ea 10, ka mor'a moo lebelo le fetoha ho ea tlhokahalo ea taolo.
Lebelo la fan ka meroalo e tlase
Ha meroalo e tlase e pakeng tsa 10 le 30%, lebelo le tla lula le le ho se behiloeng tšebetsong ea 'FanMinSpeed'.
Lebelo la fan ka mocheso o tlase oa tikoloho
- Ho qoba ho qala / ho emisa khafetsa mochesong o tlase oa mocheso moo matla a fan a leng holimo, ka hare amplification factor e theohile. Sena se fana ka taolo e bonolo.
- Lebelo la 'Jog' le lona le theoleloa sebakeng ho tloha ho 10 °C le tlase ho -20 °C.
- Mo mochesong o ka tlase ho -20 °C boleng ba 'Jog Low' bo ka sebelisoa.
Compressor compartment pele ho moea
- Fene ea condenser e qala le ho sebetsa ka nako le lebelo pele compressor e qala. Sena se etsahala molemong oa sehatsetsi sefe kapa sefe se ka chang habonolo se khethiloeng ka "o30 Refrigerant", ho fumana sepakapaka se bolokehileng ha se ntse se monya khase e ka tukang ea A2L-refrigerant ho tsoa ka har'a komporo ea compressor.
- Ho na le tieho e tsitsitseng ea metsotsoana e ka bang 8 pakeng tsa ho qala ha moea oa pele ho moea le compressor e le ho fokotsa phallo ea moea haholo le ho qoba mathata a ho kokobetsa mocheso o tlase oa tikoloho.
Taolo ea konpresser
- Compressor e laoloa ke letšoao ho DI1 input.
- Compressor e tla qala hang ha ho kenya letsoho ho hoketsoe.
Lithibelo tse tharo li kentsoe ts'ebetsong ho qoba ho qala / ho emisa khafetsa:
- E 'ngoe bakeng sa bonyane KA nako
- E 'ngoe bakeng sa bonyane ba nako ea OFF
- E 'ngoe ea hore na e tlameha ho feta nako e kae lipakeng tsa ho qala tse peli.
Lithibelo tsena tse tharo li na le boemo bo phahameng ka ho fetisisa nakong ea taolo, 'me mesebetsi e meng e tla ema ho fihlela e phethoa pele taolo e ka tsoela pele. Ha kompressor e ' notletsoe' ke thibelo, sena se ka bonoa tsebisong ea boemo. Haeba tlhahiso ea DI3 e sebelisoa e le sebaka sa tšireletso bakeng sa compressor, letšoao le sa lekaneng la ho kenya le tla emisa hang-hang. Li-compressor tsa lebelo tse feto-fetohang li ka laoloa ka lebelo ka voltage le pontšo ho tlhahiso ea AO2. Haeba compressor ena e 'nile ea sebetsa nako e telele ka lebelo le tlaase, lebelo le eketseha ka nako e khutšoanyane ka morero oa ho khutlisa oli.
Boemo bo phahameng ba mocheso oa khase
- Thempereichara e tlalehiloe ke sensor Td.
- Haeba taolo ea lebelo le fapaneng e khethiloe bakeng sa compressor, taolo ena qalong e tla fokotsa matla a compressor haeba mocheso oa Td o atamela boleng bo phahameng bo behiloeng.
- If a higher temperature is detected than the set max. temperature, the fan’s speed will be set to 100%. If this does not cause the temperature to drop, and if the temperature remains high after the set delay time, the compressor will be stopped.
- The compressor will only be re-started once the temperature is 10 K lower than the set value. The above mentioned re-start restrictions must also be complete before the compressor can start once again.
- Haeba nako ea ho lieha e behiloe ho '0', ts'ebetso e ke ke ea emisa compressor. Sensor ea Td e ka koaloa (o63).
Ente ea mokelikeli koung ea economizer
- Selaoli se ka kenya ente ea mokelikeli boema-kepeng ba economizer haeba mocheso oa mocheso o atamela mocheso o phahameng o lumelletsoeng.
- Hlokomela: Ts'ebetso ea ente ea metsi e sebelisa Aux Relay haeba relay e lokiselitsoe ts'ebetsong ena.
Tlhokomelo e phahameng ea khatello
- Nakong ea taolo, ts'ebetso ea ka hare ea khatello e phahameng ea khatello e khona ho lemoha khatello ea khatello e fetang moeli e le hore molao o ka tsoela pele.
- Leha ho le joalo, haeba tlhophiso ea c73 e fetisitsoe, compressor e tla emisoa mme alamo ea qala.
- Haeba, ka lehlakoreng le leng, lets'oao le tsoa ho potoloho ea tšireletso e sitisitsoeng e hokahaneng le DI3, compressor e tla emisoa hang-hang mme fan e tla beoa ho 100%.
- Ha lets'oao le boetse le 'OK' ho kenyelletso ea DI3, molao o tla qala hape.
Ho shebella khatello e tlase
Nakong ea taolo, ts'ebetso ea ka hare ea khatello e tlaase e tla khaola compressor ha e lemoha khatello ea ho hula e oelang ka tlaase ho moeli o tlaase, empa hang feela ha bonyane nako ea ON e fetisitsoe. Ho tla fanoa ka alamo (A2). Ts'ebetso ena e tla lieha nako, haeba compressor e qala ka mocheso o tlase oa tikoloho.
Moeli oa ho pompa fatše
Compressor e tla emisoa haeba khatello ea ho hula e oelang ka tlase ho boleng bo behiloeng e ngolisitsoe, empa hang feela bonyane nako ea ON e fetisitsoe. 
Ntho e futhumatsang ka har'a crankcase
- Molaoli o na le tšebetso ea thermostat e ka laolang karolo ea ho futhumatsa bakeng sa crankcase. Ka hona, oli e ka bolokoa e arohane le sehatsetsing. Mosebetsi o sebetsa ha konpresser e emisitse.
- Ts'ebetso e ipapisitse le mocheso o tikolohong le mocheso oa khase e monyang. Ha lithempereichara tse peli li lekana ± phapang ea mocheso, motlakase o tla fanoa ho karolo ea ho futhumatsa.
- Boemo ba 'CCH off diff' bo bontša ha motlakase o ke ke oa hlola o fanoa sebakeng sa ho futhumatsa.
- 'CCH on diff' e bontša hore na matla a 100% a tla romelloa neng sebakeng sa ho futhumatsa.
- Pakeng tsa litlhophiso tse peli molaoli o bala wattage le ho hokela ho element element ya ho futhumatsa ka pulse/pause cycle e tsamaellanang le wat e batloangtage.
- Sensor ea Taux e ka sebelisoa ho rekota mocheso ka har'a crankcase haeba o lakatsa.
- Ha sensor ea Taux e tlaleha mocheso o ka tlase ho Ts+10 K, sesebelisoa sa ho futhumatsa se tla beoa ho 100%, empa ha feela mocheso o le ka tlase ho 0 °C.
Mosebetsi o arohaneng oa thermostat
Sensor ea taux e ka sebelisoa hape ts'ebetsong ea ho futhumatsa e nang le mocheso o hlophisitsoeng. Mona, relay ea AUX e tla hokahanya ntho e futhumatsang.
Lisebelisoa tsa dijithale
Ho na le lintho tse kenyang tse peli tsa dijithale DI1 le DI2 tse nang le ts'ebetso ea ho ikopanya le e le 'ngoe ea DI3 e nang le molumo o phahamengtage pontšo.
Li ka sebelisoa bakeng sa mesebetsi e latelang:
- DI1: E qala le ho emisa compressor
- DI2: Mona mosebelisi a ka khetha ho tsoa mesebetsing e fapaneng
- Letšoao le tsoang ts'ebetsong ea ts'ireletso ea kantle
- Swichi e kholo ea kantle / lets'oao la ho khutlisa bosiu / ts'ebetso e arohaneng ea alamo / Tlhokomelo ea lets'oao la ho kenya / lets'oao ho tsoa taolong ea lebelo ea kantle
- DI3: Letšoao la polokeho ho tsoa ho switch e tlase / e phahameng ea khatello
Puisano ya data
- Molaoli o fanoa ka puisano ea data ea MODBUS e hahelletsoeng.
- Haeba mokhoa o fapaneng oa puisano ea data o kōptjoa, mojule oa LON RS-485 o ka kenngoa ho molaoli.
- Khokelo e tla etsoa ho terminal RS 485. Bohlokoa
- Likhokahano tsohle tsa puisano ea data li tlameha ho lumellana le litlhoko tsa likhoele tsa puisano tsa data.
- Sheba lingoliloeng: RC8AC.
Pontšo
- Molaoli o na le plug e le 'ngoe bakeng sa pontšo. Mona ho ka hokelloa mofuta oa EKA 163B kapa EKA 164B (bolelele ba bolelele ba 15 m).
- EKA 163B ke pontšo bakeng sa ho baloa.
- EKA 164B ke ea ho bala le ho sebetsa.
- Khokahano lipakeng tsa ponts'o le molaoli e tlameha ho ba le thapo e nang le polaka mahlakoreng ka bobeli.
- Ho ka etsoa maemo ho bona hore na Tc kapa Ts e tla baloa. Ha boleng bo baloa, ho bala ha bobeli ho ka bontšoa ka ho tobetsa konopo e ka tlaase ka bokhutšoanyane.
- Ha ponts'o e tla hokeloa ho MODBUS e hahelletsoeng, ponts'o e ka tsoela peletage ka fetoleloa ho o mong oa mofuta o tšoanang, empa ka Index A (mofuta o nang le li-terminals tsa screw).
- Aterese ea balaoli e tlameha ho behoa holimo ho feta 0 e le hore pontšo e khone ho buisana le molaoli.
- Haeba ho hlokahala khokahano ea lipontšo tse peli, e 'ngoe e tlameha ho hokahanngoa le polaka (max. 15 m) 'me e 'ngoe e tlameha ho hokahanngoa le puisano e tsitsitseng ea data.
Fetola
Molaoli o na le mesebetsi e ka sebelisoang hammoho le ts'ebetso ea ho feta ho master gateway/system manager.
| Mosebetsi ka data puisano | Kemiso ea letsatsi/Bosiu |
| Mosebetsi in gateway/system mookameli | Taolo ya motshehare/Bosiu/ Kemiso ya nako |
| Se sebedisoang mekhahlelo in Optyma™ Hape | - Ho khutlela morao bosiu |
Tlhahlobo ea mesebetsi
| Mosebetsi | Para- metara | Paramethara by ts'ebetso ka data puisano |
| Tloaelehileng pontsho | ||
|
Ts / Tc | |
| Thermostat | Thermostat taolo | |
| Beha ntlha Tc ea referense ea molaoli ke mocheso o ka ntle + sebaka se behiloeng + offset efe kapa efe e sebetsang. Kenya ntlha e behiloeng ka ho tobetsa konopo e bohareng. Offset e ka kenngoa ka r13. |
Referense | |
| Yuniti Set here if the display is to show SI-units or US-units 0: SI (°C and bar) 1: US (°F and Psig). |
r05 | Yuniti
°C=0. / °F=1 (Ke °C feela ho AKM, ho sa tsotellehe hore na boemo ke bofe) |
Qala / Ema of sehatsetsi
|
r12 | Main switjha
|
| Bosiu kgutlela morao boleng Tlhaloso ea molaoli e phahamisoa ke boleng bona ha molaoli a fetola ts'ebetso ea bosiu. |
r13 | Qetello ea bosiu |
| Referense Ts
Mona referense e kenngoa bakeng sa khatello ea ho monya Ts ka likhato (feela bakeng sa Optyma™ Plus inverter) |
r23 | Ts Ref |
| Referense Tc
Mona referense ea molaoli ea hajoale bakeng sa khatello ea condensing Tc e ka baloa ka likhato. |
r29 | Tc Ref |
| Kantle ho futhumatsa tshebetso
Thermostat e khaotsoe bakeng sa ntho e futhumatsang e kantle (feela ha 069=2 le o40=1) Relay e sebetsa ha mocheso o fihla boleng bo behiloeng. Relay e lokolla hape ha mocheso o eketsehile ka 5 K (phapang e behiloe ho 5 K). |
r71 | Aux Ther Ref |
| Mocheso o fokolang oa condensing (regulation regulation reference e tlaase ka ho fetisisa e lumelletsoeng) Mona sebaka se tlaase ka ho fetisisa se lumelletsoeng se kenngoa bakeng sa mocheso o fokolang Tc. | r82 | Min Cond Temp |
| Boholo ba mocheso oa condensing (highest permitted regulation reference) Mona ho kenoa tšupiso e phahameng ka ho fetisisa e lumelletsoeng bakeng sa mocheso o fokolang Tc. | r83 | Max Cond Temp |
| Boemo bo phahameng ba mocheso oa khase Mona mocheso o phahameng ka ho fetisisa o lumelletsoeng oa khase o kenngoa. Mocheso o lekanngoa ka sensor Td. Haeba mocheso o feta, fan e tla qala ho 100%. Nako e boetse e qalisoa e ka setang ho c72. Haeba setlama sa nako se fela, compressor e tla emisoa 'me ho tla ntšoa alamo. Compressor e tla hokelloa hape ka 10 K ka tlase ho moeli o sehiloeng, empa feela kamora hore nako ea nako ea compressor e felile. |
r84 | Max Disch Temp |
| Bosiu sebck
(ho qala ha lets'oao la bosiu. 0=Letsatsi, 1=Bosiu) |
||
| Alamo | Alamo litlhophiso | |
| Molaoli a ka fana ka alamo maemong a fapaneng. Ha ho na le alamo, li-light-emitting diode (LED) li tla benya holim'a karolo e ka pele ea controller, 'me alamo e tla tima. | Ka puisano ea data bohlokoa ba lialamo ka bomong bo ka hlalosoa. Litlhophiso li etsoa ho "Alarm destinations" menu ka AKM. | |
| tieho of a DI2 alamo Kenyelletso ea ho khaola / ho khaola ho tla etsa hore ho be le alamo ha tieho ea nako e fetile. Mosebetsi o hlalosoa ho o37. |
A28 | AI. Delay DI2 |
| Phahameng condensing mocheso alamo moeli Moeli oa mocheso o khutsufatsang, o behiloe e le phapang ka holim'a ts'ebeliso ea hang-hang (parameter r29), moo Alarm ea A80 e sebetsang ka mor'a ho lieha ho fela (sheba parameter A71). Parameter e behiloe ho Kelvin. |
A70 | Air flow Diff |
| Ho lieha nako bakeng sa alamo ea A80 - bona hape le paramente A70. Beha metsotso. | A71 | Phallo ea moea del |
| Seta alamo bocha | ||
| Ctrl. Phoso |
| Sekontiri | Sekontiri taolo | |
|
||
| Linako tsa ho matha
Ho thibela ts'ebetso e sa tloaelehang, litekanyetso li ka beoa bakeng sa nako eo compressor e lokelang ho sebetsa hang ha e se e qalile. Le hore na bonyane e tlameha ho emisoa ka nako e kae. |
||
| Min. NAKONG (ka metsotsoana) | c01 | Min. Ka nako |
| Min. Nako ea ho se sebetse (ka metsotsoana) | c02 | Min. Nako ea nako |
| Bonyane nako pakeng tsa sehetsoe of phetiso (ka metsotso) | c07 | Nako ea ho qala bocha |
| Pompo fatshe Moeli Boleng ba khatello eo compressor e emang ho eona |
c33 | PumpDownLim |
| Sekontiri min. lebelo Mona bonyane lebelo le lumellehang bakeng sa compressor le behiloe. |
c46 | CmpMinSpeed |
| Sekontiri qala lebelo Compressor e ke ke ea qala pele lebelo le hlokahalang le ka finyelloa |
c47 | CmpStrSpeed |
| Sekontiri max. lebelo Moeli o kaholimo oa lebelo la konpressor |
c48 | CmpMaxSpeed |
| Sekontiri max. lebelo nakong bosiu ts'ebetso Moeli o kaholimo oa lebelo la compressor nakong ea ts'ebetso ea bosiu. Nakong ea ts'ebetso ea bosiu, boleng ba c48 bo fokotsehile ho peresentetage bohlokoa e behiloeng mona |
c69 | CmpMax % Ngt |
Tlhaloso of konpresser taolo mokgoa
|
c71 | Comp mode |
| tieho nako bakeng sa hodimo phallela khase mocheso (ka metsotso) Ha sensor Td e tlaleha mocheso o phahameng ho feta boleng ba moeli bo kentsoeng ka r84, nako e tla qala. Ha nako ea ho lieha e felile, compressor e tla emisoa haeba mocheso o ntse o le holimo haholo. Ho tla boela ho fanoe ka alamo. |
c72 | Disch. Del |
| Max. khatello (Max. condensing khatello) Khatello e phahameng ka ho fetesisa e lumelletsoeng e behiloe mona. Haeba khatello e eketseha, compressor e tla emisoa. |
c73 | PCMax |
| Phapang bakeng sa max. khatello (condensing pressure) Phapang bakeng sa ho qala bocha ha konpresser haeba e khaotsoe ka lebaka la PcMax. (Linako tsohle li tlameha ho felloa ke nako pele ho qala bocha ho lumelloa) | c74 | Phapang ea PC |
| Bonyane ho monya khatello Kenya khatello e tlase e lumelletsoeng ea ho hula mona. Compressor e emisoa haeba khatello e theoha ka tlase ho boleng bo fokolang. |
c75 | PsLP |
| Ho hula khatello phapang Phapang bakeng sa ho qala hape ha compressor haeba e khaotsoe ka lebaka la PsLP. (Linako tsohle li tlameha ho felloa ke nako pele ho qala bocha ho lumelloa) |
c76 | PsDiff |
| Amptokafatso ntlha Kp bakeng sa konpresser taolo Haeba boleng ba Kp bo theohile, molao o tla tsamaea butle |
c82 | Cmp Kp |
| Kopanyo nako Tn bakeng sa konpresser taolo Haeba boleng ba Tn bo eketseha, taolo e tla sebetsa hantle haholoanyane |
c83 | Comp Tn sec |
| Mokelikeli Ente Offset Relay ea ente ea mokelikeli e kentsoe tšebetsong ha mocheso o feta "r84" ho tloswa "c88" (empa ha feela konpresser e sebetsa). |
c88 | LI Offset |
| Mokelikeli Ente hysterese Relay ea ente ea mokelikeli e ea koaloa ha mocheso o theohetse ho "r84" ho tloswa "c88" ho tloswa "c89". |
c89 | LI Hyst |
| Sekontiri Ema tieho kamora Mokelikeli ente
Compressor ON-nako ka mor'a hore relay "Aux relay" e tingoe |
c90 | LI tieho |
| Lebelo le lakatsehang la compressor mabapi le liphoso tsa transmitter ea khatello. Lebelo nakong ea ts'ebetso ea tšohanyetso. | c93 | CmpEmrgSpeed |
| Min Ka nako nakong ya Mocheso o Tlase wa Ambient le Kgatello e Tlase | c94 | c94 LpMinOnTime |
| Measured Tc eo Comp min lebelo la eona le phahamisetsoang ho StartSpeed | c95 | c95 TcSpeedLim |
| LED e ka pele ea molaoli e tla bontša hore na sehatsetsi se ntse se tsoela pele. |
| Fane | Fane taolo | |
| Amptokafatso ntlha Kp Haeba boleng ba KP bo theohile, lebelo la fan le tla fetoha. |
n04 | Kp ntlha |
| Kopanyo Nako Tn Haeba boleng ba Tn bo eketseha, lebelo la fan le tla fetoha. |
n05 | Tn sec |
| Amptokafatso ntlha Kp max Taolo e sebelisa Kp ena, ha boleng bo lekantsoeng bo le hole le litšupiso |
n95 | Cmp kp Max |
| Fane lebelo Lebelo la sebele la fan le baloa mona e le % ea lebelo la lebitso. |
F07 | Lebelo la Fans % |
| Fetola in fan lebelo Phetoho e lumelletsoeng ea lebelo la fan e ka kenngoa bakeng sa ha lebelo la fan le lokela ho theoleloa. Litlhophiso li ka kenngoa joalo ka liperesentetage bohlokoa motsotsoana. |
F14 | Motheohelang |
| Jog lebelo Beha lebelo la ho qala fan mona. Kamora metsotsoana e leshome mosebetsi oa jog o tla emisa mme lebelo la fan le tla laoloa ke taolo e tloaelehileng. |
F15 | Lebelo la Jog |
Jog lebelo at tlase mocheso
|
F16 | LowTempJog |
Fane taolo tlhaloso
|
F17 | FanCtrlMode |
| Bonyane fan lebelo Beha lebelo le tlase haholo le lumelletsoeng la fan mona. Fane e tla emisoa haeba mosebelisi a kena ka lebelo le tlase. |
F18 | MinFanSpeed |
| Boholo fan lebelo Lebelo le holimo la fan le ka fokotsoa mona. Boleng bo ka kenngoa ka ho beha lebelo la lebitso la 100% ho liperesente tse lakatsehangtage. |
F19 | MaxFanSpeed |
| Bukana fan lebelo taolo Phetoho ea taolo ea lebelo la fan e ka etsoa mona. Ts'ebetso ena e sebetsa feela ha sesebelisoa se seholo se le maemong a ts'ebeletso. |
F20 | Manual Fan % |
| Mokhahlelo oa matšeliso Boleng bo fokotsa lerata la motlakase le hlahisoang nakong ea taolo ea mohato. Boleng bo lokela ho fetoloa feela ke basebetsi ba koetlisitsoeng ka ho khetheha. |
F21 | Fan Comp |
| Fene ea condenser e tla kenya moea pele ho kamore ea compressor ho netefatsa tikoloho e bolokehileng pele compressor e qala ho lihatsetsi tsa A2L tse khethiloeng ka o30. | F23 | Nako ea FanVent |
| LED e ka pele ho molaoli e tla bonts'a hore na Fan e ntse e tsoela pele ho fanoa ka tlhahiso ea taolo ea lebelo la fan kapa relay ea fan. |
| Ea sebele nako oache | ||
| Ha o sebelisa puisano ea data, oache e ikamahanya le maemo ke yuniti ea sistimi. Haeba molaoli a se na puisano ea data, oache e tla ba le polokelo ea matla ea lihora tse 'ne. | (Linako li ke ke tsa hlophisoa ka puisano ea data. Litlhophiso li sebetsa feela ha ho se na puisano ea data). | |
| Fetoha ho letsatsi ts'ebetso Kenya nako eo referense ea taolo e fetohang sebaka se behiloeng se kentsoeng. |
t17 | Letsatsi le qala |
| Fetola ho bosiu ts'ebetso Kenya nako eo referense ea taolo e phahamisoang ka r13. |
t18 | Bosiu bo qala |
| Oache: Litlhophiso tsa hora | t07 | |
| Oache: Setting ea metsotso | t08 | |
| Oache: Ho beha letsatsi | t45 | |
| Oache: Litlhophiso tsa khoeli | t46 | |
| Oache: Boemo ba selemo | t47 | |
| Tse fapaneng | Tse fapaneng | |
|
||
| o03 | ||
| o04 |
| Phihlello khoutu 1 (Access ho kaofela litlhophiso) Haeba li-setting tse ho molaoli li lokela ho sireletsoa ka khoutu ea phihlello u ka seta boleng ba linomoro lipakeng tsa 0 le 100. Haeba ho se joalo, o ka hlakola tšebetso ka ho seta 0 (99 e tla lula e u fa phihlello). |
o05 | Acc. khoutu |
| Molaoli software phetolelo | o08 | SW ver |
Khetha sesupo bakeng sa the pontsho
|
o17 | Mokhoa oa ho bonts'a |
| Khatello mofetisi litlhophiso bakeng sa Ps Sebaka sa ho sebetsa bakeng sa ho fetisa khatello - min. boleng |
o20 | MinTransPs |
| Khatello mofetisi litlhophiso bakeng sa Ps Sebaka sa ts'ebetso bakeng sa ho fetisa khatello - max. boleng |
o21 | MaxTransPs |
| Sehatsetsi tlhophiso (ha feela “r12” = 0)
Pele sehatsetsi se qala, sehatsetsi se tlameha ho hlalosoa. U ka khetha pakeng tsa lihatsetsi tse latelang
|
o30 | Sehatsetsi |
| Dijithale kenya letsoho sesupo - DI2 Molaoli o na le "digital input 2" e ka sebelisoang bakeng sa e 'ngoe ea mesebetsi e latelang: 0: Kenyelletso ha e sebelisoe.
|
o37 | DI2 config. |
Aux phetiso tshebetso
|
o40 | AuxRelayCfg |
| Khatello mofetisi litlhophiso bakeng sa PC Sebaka sa ho sebetsa bakeng sa ho fetisa khatello - min. boleng |
o47 | MinTransPc |
| Khatello mofetisi litlhophiso bakeng sa PC Sebaka sa ts'ebetso bakeng sa ho fetisa khatello - max. boleng |
o48 | MaxTransPc |
| Khetha the mofuta of condensing unit. Sete ea feme.
|
o61 | Mofuta oa yuniti |
S3 Tlhophiso
|
o63 | Sebopeho sa S3 |
| Boloka as fektheri tlhophiso
Ka tlhophiso ena u boloka litlhophiso tsa 'nete tsa molaoli e le tlhophiso e ncha ea mantlha (litlhophiso tsa pele tsa feme li ngotsoe holimo). |
o67 | - |
Hlalosa the tshebediso of the Taux kutlo (S5)
|
o69 | Taux Config |
| Nako nako bakeng sa ho futhumatsa element in kh'ankase Ka nako ena molaoli ka boeena o tla bala nako ea OFF le ON. Nako e kenngoa ka metsotsoana. |
P45 | Nako ea PWM |
| Phapang bakeng sa the ho futhumatsa likarolo 100% ON ntlha Phapano e sebetsa ho palo ea likhato tse ka tlase ho boleng ba 'Tamb minus Ts = 0 K' |
P46 | CCH_OnDiff |
| Phapang bakeng sa the ho futhumatsa likarolo tletseng TLOA ntlha Phapano e sebetsa ho palo ea likhato tse ka holimo ho boleng ba 'Tamb minus Ts = 0 K' |
P47 | CCH_OffDiff |
| Ho sebetsa nako bakeng sa condensing unit The condensing unit’s operating time can be read out here. The read-out value must be multiplied by 1,000 in order to obtain the correct value. (The displayed value can be adjusted if required) |
P48 | Unit Runtime |
| Ho sebetsa nako bakeng sa the konpresser The compressors operating time can be read out here. The read-out value must be multi- plied by 1,000 in order to obtain the correct value. (The displayed value can be adjusted if required) |
P49 | Comp Runtime |
| Ho sebetsa nako bakeng sa ho futhumatsa element in kh'ankase Nako ea ts'ebetso ea sesebelisoa sa ho futhumatsa e ka baloa mona. Boleng ba ho bala bo tlameha ho atolosoa ka 1,000 e le hore u fumane boleng bo nepahetseng (boleng bo bontšitsoeng bo ka fetoloa haeba ho hlokahala). |
P50 | CCH Runtime |
| Nomoro of HP dialamo Palo ea lialamo tsa HP e ka baloa mona (boleng bo bontšitsoeng bo ka fetoloa haeba ho hlokahala). |
P51 | HP Alarm Cnt |
| Nomoro of LP dialamo Palo ea lialamo tsa LP e ka baloa mona (boleng bo bontšitsoeng bo ka fetoloa haeba ho hlokahala). |
P52 | LP Alarm Cnt |
| Nomoro of phallela dialamo Palo ea lialamo tsa Td e ka baloa mona (boleng bo bontšitsoeng bo ka fetoloa haeba ho hlokahala). |
P53 | DisAlarm Cnt |
| Nomoro of thibetsoe condenser dialamo Palo ea lialamo tse koetsoeng tsa condenser li ka baloa mona (boleng bo bonts'itsoeng bo ka fetoloa haeba ho hlokahala). |
P90 | BlckAlrm Cnt |
| Oli khutla tsamaiso Lebelo moeli Haeba lebelo la compressor le feta moeli ona, counter counter e tla eketsoa. E tla fokotseha haeba lebelo la compressor le theoha ka tlase ho moeli ona. |
P77 | ORM SpeedLim |
| Oli khutla tsamaiso nako Moeli oa boleng ba k'haontara e hlalositsoeng ka holimo. Haeba k'hamera e feta moeli ona, lebelo la compressor le tla phahamisetsoa ho lebelo la boost. |
P78 | Nako ea ORM |
| Oli khutla tsamaiso Matlafatsa lebelo Lebelo lena la compressor le tiisa hore oli e khutlela ho compressor |
P79 | ORM BoostSpd |
| Oli khutla tsamaiso Matlafatsa nako. Nako eo compressor e tlamehang ho sebetsa ka Boost speed |
P80 | ORM BoostTim |
| Tshebeletso | Tshebeletso | |
| Bala khatello ea PC | u01 | Sebaka sa PC |
| Bala mocheso Taux | u03 | T_aux |
| Boemo ba ho kenya DI1. Ho/1=kwetswe | u10 | Boemo ba DI1 |
| Boemo ba ts'ebetso ea bosiu (ho buloa kapa ho tima) ho = ts'ebetso ea bosiu | u13 | NightCond |
| Bala Superheat | u21 | Mocheso o moholo oa SH |
| Bala mocheso ho sensor ea S6 | u36 | Mocheso oa S6 |
| Bala matla a konpresser ka% | u52 | CompCap % |
| Boemo ba ho kenya DI2. Ho/1=kwetswe | u37 | Boemo ba DI2 |
| Boemo ho relay bakeng sa compressor | u58 | Comp Relay |
| Boemo ho relay bakeng sa fan | u59 | Phetiso ea fan |
| Boemo ho relay bakeng sa alamo | u62 | Molaetsa oa alamo |
| Boemo ho relay "Aux" | u63 | Aux lesokoana |
| Boemo ho relay bakeng sa ho futhumatsa element ka crankcase | u71 | Phatlalatso ea CCH |
| Boemo ba ho kenya DI3 (ka/1 = 230 V) | u87 | Boemo ba DI3 |
| Bala khatello ea condensing mochesong | U22 | Tc |
| Bala khatello Pes | U23 | Ps |
| Bala khatello ea maikutlo ka mocheso | U24 | Ts |
| Bala mocheso oa tikoloho Tamb | U25 | T_ambient |
| Bala mocheso oa Td | U26 | T_Lahla |
| Bala mocheso oa khase e monyang ho Ts | U27 | T_Suction |
| Moqtage ho sehlahisoa sa analogue AO1 | U44 | AO_1 Volt |
| Moqtage ho sehlahisoa sa analogue AO2 | U56 | AO_2 Volt |
| Ho sebetsa boemo | (Tekanyo) | |
| Molaoli o feta maemong a mang a laolang moo a ntseng a emetse ntlha e latelang ea taolo. Ho etsa hore maemo ana a "hobaneng ho se letho le etsahalang" a bonahale, o ka bona boemo ba ts'ebetso ponts'o. Tobetsa hakhutšoanyane (1s) konopo e ka holimo. Haeba ho na le khoutu ea boemo, e tla bontšoa skrineng. Likhoutu tsa maemo a motho ka mong li na le meelelo e latelang: | Ctrl. naha: | |
| Taolo e tlwaelehileng | S0 | 0 |
| Ha kompressor e sebetsa e tlameha ho sebetsa bonyane metsotso e x. | S2 | 2 |
| Ha kompressor e emisoa, e tlameha ho ema bonyane metsotso e x. | S3 | 3 |
| Sehatsetsi se emisitsoe ke main switch. Ekaba ka r12 kapa DI-input | S10 | 10 |
| Taolo ea liphetho ka letsoho | S25 | 25 |
| Ha ho sehatsetsi se khethiloeng | S26 | 26 |
| Tšireletso e sehiloeng Max. khatello e kokobetsang e fetelletse. Li-compressor kaofela li ile tsa emisa. | S34 | 34 |
| Tse ding lipontšo: | ||
| Password e hlokahalang. Beha phasewete | PS | |
| Taolo e emisoa ka main switch | TLOA | |
| Ha ho sehatsetsi se khethiloeng | ref | |
| Ha ho mofuta o khethiloeng bakeng sa yuniti ea condensing. | mofuta |
| Phoso molaetsa | |||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
| Khoutu / Alamo mongolo ka data puisano | Tlhaloso | Ketso | |||||||||||||||||||||||||||||||||||||||||||||
| A2/— Alamo ea LP | Khatello e tlase ea ho monya | Sheba litaelo tsa yuniti ea condensing | |||||||||||||||||||||||||||||||||||||||||||||
| A11/— Ha ho Rfg. rekisa. | Ha ho sehatsetsi se khethiloeng | Beha o30 | |||||||||||||||||||||||||||||||||||||||||||||
| A16 /— alamo ea DI2 | Alamo ea DI2 | Lekola tšebetso e romellang lets'oao ho DI2 input | |||||||||||||||||||||||||||||||||||||||||||||
| A17 / — Alamo ea HP | Alamo ea C73 / DI3 (alamo e phahameng / e tlase ea khatello) | Sheba litaelo tsa yuniti ea condensing | |||||||||||||||||||||||||||||||||||||||||||||
| A45 /— Boemo ba standby | Boemo ba standby (sehatsetsi se emisitsoeng ka r12 kapa DI1-input) | r12 le/kapa DI1 input e tla qala molao | |||||||||||||||||||||||||||||||||||||||||||||
| A80 / - Cond. thibetsoe | Phallo ea moea e fokotsehile. | Hloekisa yuniti ea condensing | |||||||||||||||||||||||||||||||||||||||||||||
| A96 / - Max Disc. Temp | Mocheso oa mocheso oa khase o fetisoa | Sheba litaelo tsa yuniti ea condensing | |||||||||||||||||||||||||||||||||||||||||||||
| A97 / - Alamo ea polokeho | Ts'ebetso ea polokeho ho DI2 kapa DI 3 e kentsoe tšebetsong | Lekola ts'ebetso e romellang lets'oao ho DI2 kapa DI3 input le tataiso ea ho potoloha ha konpresser | |||||||||||||||||||||||||||||||||||||||||||||
| A98 / - Alamo ea ho khanna | Alamo e tsoang taolong ea lebelo | Lekola taolo ea lebelo | |||||||||||||||||||||||||||||||||||||||||||||
| E1 /— Ctrl. Phoso | Liphoso ho molaoli |
Lekola sensor le khokahano |
|||||||||||||||||||||||||||||||||||||||||||||
| E20 /— Pc Sensor Err | Phoso ho sesebelisoa sa khatello ea PC | ||||||||||||||||||||||||||||||||||||||||||||||
| E30 /— Taux Sensor Err | Phoso ho sensor ea Aux, S5 | ||||||||||||||||||||||||||||||||||||||||||||||
| E31/—Tamb Sensor Err | Phoso ho sensor ea moea, S2 | ||||||||||||||||||||||||||||||||||||||||||||||
| E32 / —Tdis Sensor Err | Phoso ho sensor ea discharge, S3 | ||||||||||||||||||||||||||||||||||||||||||||||
| E33 / —Tsuc Sensor Err | Phoso ho sensor ea khase e monyang, S4 | ||||||||||||||||||||||||||||||||||||||||||||||
| E39/— Ps Sensor Phoso | Phoso ho mochini o fetisang khatello Ps | ||||||||||||||||||||||||||||||||||||||||||||||
| Lintlha puisano
Bohlokoa ba lialamo tsa motho ka mong bo ka hlalosoa ka maemo. Litlhophiso li tlameha ho etsoa sehlopheng sa "Alarm destinations"
|
|||||||||||||||||||||||||||||||||||||||||||||||
Tshebetso
Pontšo
Litekanyetso li tla bontšoa ka linomoro tse tharo, 'me ka tlhophiso u ka tseba hore na mocheso o lokela ho bontšoa ho °C kapa °F.
Li-diode tse hlahisang leseli (LED) ka phanele e ka pele
Li-LED tse karolong e ka pele li tla khantša ha relay e amehang e butsoe.
= Sehatsetsi
= ntho e futhumatsang ka har'a crankcase e butsoitse
= Fane e matha
- Li-diode tse hlahisang leseli li tla benya ha ho utloahala alamo.
- Boemong bona, o ka khoasolla khoutu ea phoso ho ponts'o ebe o hlakola / saena bakeng sa alamo ka ho fa konopo e kaholimo ho sutumetsa hanyane.
Likonopo
When you want to change a setting, the upper and the lower button will give you a higher or lower value depending on the button you are pushing. But before you change the value, you must have access to the menu. You obtain this by pushing the upper button for a couple of seconds – you will then enter the column with parameter codes. Find the parameter code you want to change and push the middle buttons until value for the parameter is shown. When you have changed the value, save the new value by once more pushing the middle button. (If not operated for 20 (5) seconds, the display will change back to the Ts/Tc temperature display).
Examples
Seta menu
- Tobetsa konopo e ka holimo ho fihlela paramethara r05 e bonts'oa
- Tobetsa konopo e ka holimo kapa e ka tlaase 'me u fumane parameter eo u batlang ho e fetola
- Tobetsa konopo e bohareng ho fihlela boleng ba parameter bo bonts'oa
- Tobetsa konopo e ka holimo kapa e tlase ebe u khetha boleng bo bocha
- Tobetsa konopo e bohareng hape ho emisa boleng.
Relay ea alamo ea cutout / alamo ea rasiti/bona khoutu ea alamo
- Tobetsa e khutšoanyane ea konopo e ka holimo
- Haeba ho na le likhoutu tse 'maloa tsa alamo li fumaneha ka har'a stack. Tobetsa konopo e ka holimo-holimo kapa e tlase ho feta ho skena stack.
Beha ntlha
- Tobetsa konopo e bohareng ho fihlela boleng ba mocheso bo bonts'oa
- Tobetsa konopo e ka holimo kapa e tlase ebe u khetha boleng bo bocha
- Tobetsa konopo e bohareng hape ho phethela tlhophiso.
- Ho bala mocheso ho Ts (haeba Tc e le pontšo ea mantlha) kapa Tc (haeba Ts e le pontšo ea mantlha)
- Tobetsa e khutšoanyane ea konopo e ka tlaase
Qala hantle
Ka mokhoa o latelang o ka qala taolo kapele haholo:
- Bula paramethara r12 'me u emise molao (ka yuniti e ncha e sa beoang pele, r12 e tla be e se e behiloe ho 0 e bolelang hore taolo e emisitsoeng.
- Khetha sehatsetsing ka parameter o30
- Bula parameter r12 'me u qale molao. Qala/emisa ho kenya DI1 kapa DI2 le yona e tlameha ho kenngwa tshebetsong.
- Etsa tlhahlobo ea litlhophiso tsa feme. Etsa liphetoho tse hlokahalang ho li-parameter tse fapaneng.
- Bakeng sa marang-rang.
- Beha aterese ho o03
- Kenya ts'ebetso ea ho hlahloba ho molaoli oa sistimi.
Hlokomela
- Ha o fana ka yuniti ea condensing, molaoli o tla beoa ho mofuta oa "condensing unit" (setting o61). Litlhophiso tsena li tla bapisoa le litlhophiso tsa sehatsetsi sa hau. Haeba u khetha "sehatsetsi se sa lumelloeng", ponts'o e tla bontša "ref" 'me e emetse boemo bo bocha.
- (Ha ho e-na le phetoho ea molaoli, 061 e tlameha ho behoa joalokaha ho bontšitsoe litaelong tse tsoang ho Danfoss)
| Paramethara |
Min. boleng |
Max. boleng |
Feme tlhophiso | Nnete tlhophiso | ||
| Mosebetsi | Khoutu | |||||
| Tloaelehileng ts'ebetso | ||||||
| Beha ntlha (tšupiso ea melaoana e latela palo ea likhato tse kaholimo ho mocheso oa kantle oa Tamb) | --- | 2.0 K | 20.0 K | 8.0 K | ||
| Taolo | ||||||
| Kgetha SI kapa pontsho ya US. 0=SI (bar le °C). 1=US (Psig le °F) | r05 | 0/°C | 1/F | 0/°C | ||
| Internal Main Switch. Bukana le tšebeletso = -1, Emisa molao = 0, Qala molao =1 | r12 | -1 | 1 | 0 | ||
| Offset nakong ea ts'ebetso ea bosiu. Nakong ea ts'ebetso ea bosiu referense e phahamisoa ke boleng bona | r13 | 0 K | 10 K | 2 K | ||
| Beha sebaka sa khatello ea ho hula Ts (bakeng sa Optyma feela™ Plus inverter) | r23 | -30 °C | 10 °C | -7 °C | ||
| Ho baloa ha litšupiso tsa Tc | r29 | - | ||||
| Thermostat e kenyelelitsoeng bakeng sa ntho e futhumatsang e kantle (069=2 le o40=1) | r71 | -30,0 °C | 30,0 °C | -25 °C | ||
| Min. mocheso o kokobetsang (tšupiso e tlase e lumelletsoeng ea Tc) | r82 | 0 °C | 40 °C | 25 °C | ||
| Max. mocheso o fokolang (tšupiso e phahameng e lumelletsoeng ea Tc) | r83 | 20 °C | 50 °C | 40 °C | ||
| Max. ho ntša mocheso oa khase Td | r84 | 50 °C | 140 °C | 125 °C | ||
| Dialamo | ||||||
| Ho lieha ha nako ea alamo ho lets'oao ho kenyelletso ea DI2. E sebetsa hafeela o37=4 kapa 5. | A28 | 0 mets. | 240 mets. | 30 mets. | ||
| Alamo bakeng sa ho tsidifala ho sa lekaneng ha condenser. Phapang ea mocheso 30.0 K = Alamo e holofetse | A70 | 3.0 K | 30.0 K | 10.0 K | ||
| Ho lieha nako bakeng sa alamo ea A80. Sheba hape parameter A70. | A71 | 5 mets. | 240 mets. | 30 mets. | ||
| Sekontiri | ||||||
| Min. Ka nako | c01 | 1 s | 240 s | 5 s | ||
| Min. NAKO-nako | c02 | 3 s | 240 s | 120 s | ||
| Min. nako pakeng tsa compressor qala | c07 | 0 mets. | 30 mets. | 5 mets. | ||
| Moeli oa ho pompa moo compressor e emisitsoeng (ho beha 0.0 = ha ho na mosebetsi) | *** | c33 | 0,0 bar | 6,0 bar | 0,0 bar | |
| Min. lebelo la compressor | c46 | 25 Hz | 70 Hz | 30 Hz | ||
| Lebelo la ho qala bakeng sa compressor | c47 | 30 Hz | 70 Hz | 50 Hz | ||
| Max. lebelo la compressor | c48 | 50 Hz | 100 Hz | 100 Hz | ||
| Max. lebelo la compressor nakong ea ts'ebetso ea bosiu (% -value ea c48) | c69 | 50% | 100% | 70% | ||
Tlhaloso ea mokhoa oa ho laola compressor 0: Ha ho na compressor - Condensing unit OFF
|
* | c71 | 0 | 2 | 1 | |
| Ho lieha ha nako bakeng sa Td e phahameng. Compressor e tla emisa ha nako e felile. | c72 | 0 mets. | 20 mets. | 1 mets. | ||
| Max. khatello. Compressor e emisa haeba khatello e phahameng e tlalehiloe | *** | c73 | 7,0 bar | 31,0 bar | 23,0 bar | |
| Phapang bakeng sa max. khatello (c73) | c74 | 1,0 bar | 10,0 bar | 3,0 bar | ||
| Min. khatello ea ho hula Pes. Compressor e emisa haeba khatello e tlase e tlalehiloe | *** | c75 | -0,3 bar | 6,0 bar | 1,4 bar | |
| Phapang bakeng sa min. khatello ea ho hula le ho pompa fatše | c76 | 0,1 bar | 5,0 bar | 0,7 bar | ||
| Amplification factor Kp bakeng sa compressors PI-regulation | c82 | 3,0 | 30,0 | 20,0 | ||
| Nako ea ho kopanya Tn bakeng sa compressors PI-taolo | c83 | 30 s | 360 s | 60 s | ||
| Mokelikeli Ente Offset | c88 | 0,1 K | 20,0 K | 5,0 K | ||
| Mokelikeli Enteng hysterese | c89 | 3,0 K | 30,0 K | 15,0 K | ||
| Compressor emisa ho lieha ka mor'a ente ea Mokelikeli | c90 | 0 s | 10 s | 3 s | ||
| Lebelo le lakatsehang la compressor haeba lets'oao le tsoang ho Ps transmitter le hloleha | c93 | 25 Hz | 70 Hz | 60 Hz | ||
| Min Ka nako nakong ea Low Ambient LP | c94 | 0 s | 120 s | 0 s | ||
| Measured Tc for which the Comp min speed is raised to Start Speed | c95 | 10,0 °C | 70,0 °C | 50,0 °C | ||
| Taolo mekhahlelo | ||||||
| Amplification factor Kp bakeng sa PI-regulation | n04 | 1.0 | 20.0 | 7.0 | ||
| Nako ea ho kopanya Tn bakeng sa PI-taolo | n05 | 20 | 120 | 40 | ||
| Kp max bakeng sa taolo ea PI ha tekanyo e le hole le litšupiso | n95 | 5,0 | 50,0 | 20,0 | ||
| Fane | ||||||
| Ho bala lebelo la fan ka% | F07 | - | - | - | ||
| Phetoho e lumelletsoeng ho lebelo la fan (ho ea boleng bo tlase) % motsotsoana. | F14 | 1,0% | 5,0% | 5,0% | ||
| Lebelo la Jog (lebelo joalo ka % ha fan e qala) | F15 | 40% | 100% | 40% | ||
| tsoela pele | Khoutu | Min. | Max. | Fac. | Nnete |
| Lebelo la Jog ka mocheso o tlase | F16 | 0% | 40% | 10% | ||
| Definition of fan control: 0=Off; Internal control (AC Fan); External speed control (EC Fan) | F17 | 0 | 2 | 1 | ||
| Bonyane lebelo la fan. Tlhokahalo e fokotsehileng e tla emisa fan. | F18 | 0% | 40% | 10% | ||
| Lebelo le phahameng la fan | F19 | 40% | 100% | 100% | ||
| Taolo ka letsoho ea lebelo la fan. (Feela ha r12 e behiloe ho -1) | ** | F20 | 0% | 100% | 0% | |
| Matšeliso a karolo (e lokela ho fetoloa feela ke basebetsi ba koetlisitsoeng ka ho khetheha.) | F21 | 0 | 50 | 20 | ||
| Nako ea pele ho Ventilation ho lihatsetsi tsa A2L pele konpresser e qala | F23 | 30 | 180 | 30 | ||
| Ea sebele nako oache | ||||||
| Nako eo ba fetohelang ho ts'ebetso ea letsatsi | t17 | Lihora tse 0 | Lihora tse 23 | 0 | ||
| Nako eo ba fetohelang ho ts'ebetso ea bosiu | t18 | Lihora tse 0 | Lihora tse 23 | 0 | ||
| Oache - Ho beha lihora | t07 | Lihora tse 0 | Lihora tse 23 | 0 | ||
| Tshupanako – Peakanyo ya motsotso | t08 | 0 mets. | 59 mets. | 0 | ||
| Oache - Ho beha letsatsi | t45 | 1 letsatsi | 31 matsatsi | 1 | ||
| Tshupanako – Tlhophiso ya kgwedi | t46 | 1 khoeli. | 12 khoeli. | 1 | ||
| Oache - Ho beha selemo | t47 | 0 selemo | 99 lilemo | 0 | ||
| Tse fapaneng | ||||||
| Aterese ea marang-rang | o03 | 0 | 240 | 0 | ||
| Ho bulela / Off switch (Molaetsa oa Pin ea Ts'ebeletso) BOHLOKOA! o61 tlameha e behoe pele ho o04 (e sebelisoa ho LON 485 feela) | o04 | 0/Tlokotsi | 1/Ho qala | 0/Tlokotsi | ||
| Khoutu ea ho kena (ho fihlella litlhophiso tsohle) | o05 | 0 | 100 | 0 | ||
| Ho baloa ha mofuta oa software ea balaoli | o08 | |||||
| Khetha lets'oao bakeng sa pontšo view. 1=Khatello ea ho hula ka likhato, Ts. 2=Ho fokotsa khatello ka likhato, Ts | o17 | 1 | 2 | 1 | ||
| Lethathamo la ho sebetsa la transmitter ea khatello Ps - min. boleng | o20 | -1 bar | 5 bar | -1 | ||
| Mokhahlelo oa tšebetso oa transmitter ea khatello Ps- max. boleng | o21 | 6 bar | 200 bar | 12 | ||
Litlhophiso tsa sehatsetsing:
|
* | o30 | 0 | 42 | 0 | |
| Letšoao la ho kenya ho DI2. Mosebetsi: (0=ha e sebelisoe, 1=Ts'ebetso ea ts'ireletso ea kantle. Laola ha e koetsoe, 2= sesebelisoa se seholo sa kantle, 3=Ts'ebetso ea bosiu ha e koetsoe, 4=ts'ebetso ea alamo ha e koetsoe, 5=ts'ebetso ea alamo ha e butsoe. 6=buela / tima Boemo ba tlhokomelo 7=Alamo e tsoang taolong ea lebelo |
o37 | 0 | 7 | 0 | ||
| Mosebetsi oa Aux relay: (0=ha e sebelisoe, 1=Se futhumatsang ka ntle, 2=ente ea mokelikeli, 3=mosebetsi oa ho khutlisa oli) |
*** | o40 | 0 | 3 | 1 | |
| Lethathamo la tšebetso la mochine o fetisang khatello Pc – min. boleng | o47 | -1 bar | 5 bar | 0 bar | ||
| Mofuta o sebetsang oa transmitter ea khatello PC - max. boleng | o48 | 6 bar | 200 bar | 32 bar | ||
| Tlhophiso ea mofuta oa yuniti ea condensing (e setiloe ke fektheri ha molaoli a kentsoe 'me e ke ke ea fetoloa kamora moo) | * | o61 | 0 | 77 | 0 | |
| Sesebelisoa sa sensor S3 se tla sebelisoa ho lekanya mocheso oa khase e tsoang (1=e) | o63 | 0 | 1 | 1 | ||
| Fetola li-setting tsa feme ea balaoli ka li-setting tsa hona joale | o67 | Tima (0) | Ho (1) | Tima (0) | ||
| E hlalosa tšebeliso ea kutlo ea Taux: 0=ha e sebelisoe; 1=ho lekanya mocheso oa oli; 2=tekanyo ho tsoa tšebetsong ea mocheso o kantle 3=ts'ebeliso e 'ngoe ea boikhethelo | o69 | 0 | 3 | 0 | ||
| Nako ea nako ea ho futhumatsa ntho ka har'a crankcase (nako ea HO ON + + OFF) | P45 | 30 s | 255 s | 240 s | ||
| Phapang bakeng sa lisebelisoa tsa ho futhumatsa 100% ON ntlha | P46 | -20 K | -5 K | -10 K | ||
| Phapang ea lintho tse futhumatsang 100% OFF ntlha | P47 | 5 K | 20 K | 10 K | ||
| Nako ea ho bala e felile bakeng sa yuniti ea condenser. (Boleng bo tlameha ho atolosoa ka 1,000). Boleng bo ka fetoloa. | P48 | - | - | 0 h | ||
| Nako ea ho sebetsa ea compressor e felile. (Boleng bo tlameha ho atolosoa ka 1,000). Boleng bo ka fetoloa. | P49 | - | - | 0 h | ||
| Nako ea ho sebetsa ea ho futhumatsa ka har'a crankcase e felile. (Boleng bo tlameha ho atolosoa ka 1,000). Boleng bo ka fetoloa. | P50 | - | - | 0 h | ||
| Ho baloa ha palo ea lialamo tsa HP. Boleng bo ka fetoloa. | P51 | - | - | 0 | ||
| Ho baloa ha palo ea lialamo tsa LP. Boleng bo ka fetoloa. | P52 | - | - | 0 | ||
| Ho baloa ha palo ea lialamo tsa Td. Boleng bo ka fetoloa. | P53 | - | - | 0 | ||
| Ha ho na palo ea lialamo tse koetsoeng tsa condenser. Boleng bo ka fetoloa | P90 | - | - | 0 | ||
| Tsamaiso ea ho khutlisa oli. Lebelo la compressor bakeng sa sebaka sa ho qala khaontara | P77 | 25 Hz | 70 Hz | 40 Hz | ||
| tsoela pele | Khoutu | Min. | Max. | Fac. | Nnete |
| Tsamaiso ea ho khutlisa oli. Moeli oa boleng ba k'haontareng | P78 | 5 mets. | 720 mets. | 20 mets. | ||
| Tsamaiso ea ho khutlisa oli. Matlafatsa-lebelo | P79 | 40 Hz | 100 Hz | 50 Hz | ||
| Tsamaiso ea ho khutlisa oli. Matlafatsa nako. | P80 | 10 s | 600 s | 60 s | ||
| Tshebeletso | ||||||
| Khatello ea ho bala ho PC | u01 | bar | ||||
| Mocheso oa ho bala Taux | u03 | °C | ||||
| Boemo ba ho kenya DI1. 1=ho=kwetswe | u10 | |||||
| Boemo ba ts'ebetso ea bosiu (ho buloa kapa ho tima) 1=ka=ts'ebetso ea bosiu | u13 | |||||
| Bala ho chesa haholo | u21 | K | ||||
| Mocheso oa ho bala ho sensor ea S6 | u36 | °C | ||||
| Boemo ba ho kenya DI2. 1=ho=kwetswe | u37 | |||||
| Bala matla a compressor ka% | u52 | % | ||||
| Boemo ho relay ho compressor. 1=ho=kwetswe | ** | u58 | ||||
| Boemo ho relay ho fan. 1=ho=kwetswe | ** | u59 | ||||
| Boemo ho relay ho alamo. 1=ho=kwetswe | ** | u62 | ||||
| Boemo ho relay "Aux". 1=ho=kwetswe | ** | u63 | ||||
| Boemo ba ho fetisetsoa ho element element ea ho futhumatsa ka mekotleng ea crank. 1=ho=kwetswe | ** | u71 | ||||
| Boemo ka matla a phahamengtagke kenya DI3. 1=ka=230 V | u87 | |||||
| Readout condensing khatello ea mocheso | U22 | °C | ||||
| Khatello ea ho bala Pes | U23 | bar | ||||
| Khatello ea ho hula e bala ka mocheso | U24 | °C | ||||
| Bala ka mocheso oa tikoloho Tamb | U25 | °C | ||||
| Mocheso oa ho tsoa o bala Td | U26 | °C | ||||
| Mocheso oa mocheso oa khase ea ho bala Ts | U27 | °C | ||||
| Bala voltage ka sephetho sa AO1 | U44 | V | ||||
| Bala voltage ka sephetho sa AO2 | U56 | V | ||||
- *) E ka beoa feela ha taolo e emisitsoe (r12=0)
- **) E ka laoloa ka letsoho, empa ha feela r12=-1
- ***) Paramethara ena e ipapisitse le litlhophiso tsa o30 le o61
Boemo ba feme
Haeba o hloka ho khutlela ho boleng ba feme-set, e ka etsoa ka tsela ena:
- Khaola matla a phepelotage ho molaoli
- Boloka konopo e ka holimo le e ka tlaase e tepeletse ka nako e le 'ngoe ha u ntse u hokahanya matla a phepelotage
Seta bocha liparamente tsa lipalopalo tsa yuniti
Litekanyetso tsohle tsa boemo ba Unit (P48 ho P53 le P90) li ka hlophisoa / tsa hlakoloa ka mokhoa o latelang.
- Beha Phetoho e kholo ho 0
- Fetola liparamente tsa Lipalopalo - joalo ka ho beha libali tsa Alamo ho 0
- Ema metsotsoana e 10 - ho etsa bonnete ba hore u ngolla EEROM
- Etsa matla a Mookameli - fetisetsa litlhophiso tse ncha ho "ts'ebetso ea lipalo-palo"
- Beha Main Switch ON - 'me li-parameter li behiloe ho boleng bo bocha
Lihokelo
- DI1
Letšoao la ho kenya la dijithale.
E sebelisetsoa ho qala/ho emisa ho pholisa (thermostat ea kamore)
E qala ha tlhahiso e le khutšoanyane. - DI2
Letšoao la ho kenya la dijithale.
Ts'ebetso e hlalositsoeng e sebetsa ha ho kenya letsoho ho khutsufalitsoe/ho buloa. Mosebetsi o hlalosoa ho o37. - Pc
Transmitter ea khatello, ratiometric AKS 32R, 0 ho isa ho 32 bar
Hokela ho terminal 28, 29 le 30. - Ps
Transmitter ea khatello, ratiometric mohlala AKS 32R, -1 ho isa ho 12 bar E hoketsoe ho terminal 31, 32 le 33. - S2
Sensor ea moea, Tamb. Pt 1000 ohm sensor, mohlala. Tlhaloso: AKS 11 - S3
Sensor ea ho ntša khase, Td. Pt 1000 ohm sensor, mohlala. AKS 21 - S4
Mocheso oa khase ea ho monya, Ts. Pt 1000 ohm sensor, mohlala. Tlhaloso: AKS 11 - S5,
Tekanyo e eketsehileng ea mocheso, Taux. Pt 1000 ohm sensor, mohlala. Tlhaloso: AKS 11 - S6,
Tekanyo e eketsehileng ea mocheso, S6. Pt 1000 ohm sensor, mohlala. Tlhaloso: AKS 11 - EKA Pontšo
Haeba ho na le ho bala ka ntle / ts'ebetso ea molaoli, mofuta oa pontšo EKA 163B kapa EKA 164B o ka hokahanngoa. - RS485 (terminal 51, 52,53)
Bakeng sa puisano ea data, empa feela haeba mojule oa puisano ea data o kenngoa ho molaoli. Mojule e ka ba Lon.
Haeba puisano ea data e sebelisoa, ke habohlokoa hore ho kenngoa ha mohala oa puisano ea data ho etsoe ka nepo.
Sheba lingoliloeng tse arohaneng No. RC8AC... - AO1, terminal 54, 55
Letšoao la ho tsoa, 0 - 10 V. E tlameha ho sebelisoa haeba fene e na le taolo ea ka hare ea lebelo le 0 - 10 V DC input, mohlala EC-motor. - AO2, terminal 56, 57
Letšoao la ho tsoa, 0 - 10 V. E tlameha ho sebelisoa haeba konpresser e laoloa ka lebelo. - MODBUS (terminal 60, 61, 62)
E hahiloe ka har'a puisano ea data ea Modbus.
If data communication is used, it is important that the installation of the data communication cable is performed correctly. See separate literature No. RC8AC… (Alternatively the terminals can be connected to an external display type EKA 163A or 164A, but then they cannot be used for data communication. Any data communication must then be carried out by one of the other methods.) - Phepelo voltage
230 V AC (Ena e tlameha ho ba mohato o ts'oanang bakeng sa likhokahano tsohle tsa 230 V). - Fan
Khokahano ea fan. Lebelo le laoloang ka hare. - Alamo
Ho na le kamano pakeng tsa terminal 7 le 8 maemong a alamo le ha molaoli a se na matla. - Comp
Sekontiri. Ho na le khokahano lipakeng tsa terminal 10 le 11, ha kompressor e sebetsa. - CCH
Ntho e futhumatsang ka har'a crankcase
Ho na le khokahano lipakeng tsa li-terminals 12 le 14 ha ho futhumatsa ho etsahala. - Fane
Ho na le khokahano lipakeng tsa li-terminals 15 le 16 ha lebelo la fan le nyolleloa ho feta 95%. (Letšoao la fene le fetoha ho tloha ho terminal 5-6 ho ea ho 15-16. Hokela terata ho tloha terminal 16 ho ea fene.) - Aux
Ente ea mokelikeli moleng oa ho hula / sesebelisoa sa ho futhumatsa kantle / ts'ebetso ea ho khutlisa oli bakeng sa compressor e laoloang ka lebelo
Ho na le khokahano lipakeng tsa li-terminals 17 le 19, ha tšebetso e ntse e sebetsa. - DI3
Letšoao la ho kenya letsoho la dijithale ho tsoa ho leihlo la khatello e tlase / e phahameng.
Letšoao le tlameha ho ba le voltage ea 0 / 230 V AC. - Lerata la motlakase
Lithapo tsa li-sensor, li-input tsa DI le puisano ea data li tlameha ho bolokoa li arohane le likhoele tse ling tsa motlakase:- Sebelisa literei tsa cable tse arohaneng
- Boloka sebaka se pakeng tsa likhoele bonyane 10 cm.
- Lithapo tse telele tse kenyang DI li lokela ho qojoa
Mehopolo ea ho kenya
- Tšenyo ea tsietsi, ho se kenngoe hantle, kapa maemo a sebaka sa marang-rang, a ka baka ho se sebetse hantle ha sistimi ea taolo, 'me qetellong ea baka ho senyeha ha semela. Tšireletso e 'ngoe le e 'ngoe e ka khonehang e kenyelelitsoe lihlahisoa tsa rona ho thibela sena. Leha ho le joalo, kemiso e fosahetseng, bakeng sa mohlalaample, e ntse e ka hlahisa mathata. Litaolo tsa elektroniki ha li nke sebaka sa tloaelo e ntle ea boenjiniere.
- Danfoss e ke ke ea ikarabella bakeng sa thepa leha e le efe, kapa metsoako ea limela, e senyehileng ka lebaka la liphoso tse ka holimo. Ke boikarabello ba motho ea kenyang letsoho ho hlahloba ho kenya ka botlalo, le ho lumellana le lisebelisoa tse hlokahalang tsa tšireletso. Ho buuoa ka ho khetheha mabapi le tlhokahalo ea matšoao ho molaoli ha compressor e emisoa le tlhokahalo ea ba amohelang metsi pele ho li-compressor.
- Moemeli oa hau oa lehae oa Danfoss o tla thabela ho u thusa ka likeletso tse ling, joalo-joalo.
Lintlha
| Phepelo voltage | 230 V AC +10/-15 %. 5 VA, 50 / 60 Hz | ||
| Sensor S2, S3, S4, S5, S6 | Pt 1000 | ||
| Ho nepahala | Lekhalo la ho lekanya | -60 - 120 °C (S3 ho isa ho 150 °C) | |
| Molaoli | ±1 K below -35°C± 0.5 K between -35 – 25 °C;±1 K above 25 °C | ||
| Pt 1000 sensor | ±0.3 K at 0 °C±0.005 K per degree | ||
| Ho lekanya PC, Pes | Mohatelli oa khatello | Ratiometric. mohlala. AKS 32R, DST-P110 | |
| Pontšo | LED, linomoro tse 3 | ||
| Pontšo ea kantle | EKA 163B kapa 164B (leha e le efe EKA 163A kapa 164A) | ||
| Lisebelisoa tsa dijithale DI1, DI2 | Signal from contact functions Requirements to contacts: Gold plating Cable length must be max. 15 mUse auxiliary relays when the cable is longer | ||
| Kenyelletso ea dijithale DI3 | 230 V AC ho tsoa ho pressostat ea polokeho. Khatello e tlase/e phahameng | ||
| Motlakase oa khokahanyo ea motlakase | Boholo.1.5 limilimithara2 thapo e nang le mefuta e mengata | ||
| Tlhahiso ea Triac | Fane | Max. 240 V AC, Min. 28 V AC Max. 2.0 ALeak < 1 mA | |
| Relay* | CE (250 V AC) | ||
| Khopolo, CCH | 4 (3) A | ||
| Alamo, Fan, Aux | 4 (3) A | ||
| Sephetho sa Analog |
|
||
| Tikoloho |
|
||
| 20 - 80% Rh, eseng condensed | |||
| Ha ho tshusumetso ya tshohanyetso / vibrations | |||
| Botenya | IP20 | ||
| Ho phahamisa | DIN-seporo kapa lebota | ||
| Boima ba 'mele | 0.4 lik'hilograma | ||
| Khokahano ea data | E tsitsitse | MOHAPI | |
| Likhetho tsa katoloso | LONA | ||
| Polokelo ea matla bakeng sa oache | Lihora tse 4 | ||
| Litumello |
|
||
Ho laela
Danfoss AIS
- Litharollo tsa Boemo ba Leholimo
- danfoss.com
- +45 7488 2222
Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or Via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product. All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A’S. All rights reserved.
Lipotso Tse Botsoang Hangata
How can I adjust the reference setpoint on the controller?
Use the upper and lower buttons to adjust the reference setpoint. Be cautious not to unintentionally change settings.
Ho etsahala'ng haeba compressor e lemoha khatello e tlase ea ho huloa?
The internal low pressure monitoring function will cut out the compressor after a specified time delay if suction pressure falls below the lower limit, triggering an alarm (A2).
How does the fan speed operate during low loads?
At low loads between 10-30%, the fan speed remains constant at the level set in the 'FanMinSpeed' function.
Litokomane / Lisebelisoa
 |
Danfoss Optyma Plus SW Ver. 3.7x Controller for Condensing Unit [pdf] Bukana ea Mosebelisi Optyma Plus SW Ver. 3.7x Controller for Condensing Unit, Optyma Plus SW Ver. 3.7x, Controller for Condensing Unit, Condensing Unit, Controller |