Danfoss 084B4082 AK-CC55 Single Coil Case Controller
Boitsebiso
Litekanyo
Molao-motheo
Selaoli se fuoa lileibole tse tsoang femeng tse bontšang ts'ebeliso e akaretsang. Ha u khetha sesebelisoa se hlokahalang, ho fanoa ka lileibole tse khethehileng e le hore u ka kenya e loketseng.
Puisano ya data
Ho bohlokoa hore ho kengoa thapo ea khokahanyo ea data ho etsoe ka nepo ka sebaka se lekaneng ho ea ho matla a phahamengtage lik'hebole.
Litaba tsa AKV
Lintlha tsa bohlokoa tsa AKS32R
Letšoao le tsoang ho mochine o mong oa khatello le ka amoheloa ke balaoli ba ka bang 10. Ha hoa tlameha ho ba le ho theoha ho hoholo ha khatello ho tloha sebakeng sa sefetisi sa khatello mothapong oa ho hula ho ea ho mouoane ka mong.
Defrost e hokahaneng ka likhokahano tsa cable
Max. 10 Balaoli ba latelang ba ka kopanngoa ka tsela ena: EKC 204A, AK-CC 210, AK-CC 250, AK-CC 450, AK-CC 550 le AK-CC55. Sehatsetsi se tsosolosoa ka nako e le 'ngoe ha balaoli bohle ba felisitse defrost.
Pontšo ea kantle ea AK-UI55
Hlahisa: 084B4075 / 084B4076 / 084B4077
Cable 3 m: 084B4078 Cable 6 m: 084B4079
Lintlha tsa tekheniki
Litlhaloso tsa motlakase
| Lintlha tsa motlakase | Boleng |
| Phepelo voltage AC [V] | 115 V / 230 V, 50/60 Hz |
| Tšebeliso ea matla [VA] | 5 VA |
| Sesupo sa Power ON | LED e tala |
| Tekanyo ea thapo ea motlakase [mm2] | Max. 1.5 mm2 cable e nang le li-multi-core |
Sensor le data ea ho metha
| Sensor le data ea ho metha | Boleng |
| Sensor S2, S6 | Pt 1000 AKS11 |
| Sensor S3, S4, S5 | Pt 1000 AKS11
PTC 1000 EKS111 NTC5K EKS211 Tlhaloso: NTC10K EKS221 sensor (Bohle ba 3 ba tlameha ho ba ba mofuta o le mong) |
| Ho nepahala ho lekanya mocheso | P1000: -60 - 120 °C. ±0.5 K
PTC1000: -60 - 80 °C. ±0.5 K NTC5K: -40 - 80 °C. ±1.0 K NTC10K: -40 - 120 °C. ±1.0 K |
| Tlhaloso ea sensor ea PT1000 | ±0.3 K ho 0 °C
± 0.005 K ka degree |
| Pe lekanya | AKS 32R Ratiometric khatello ea transmitter: 10 - 90% |
| Ho lekanya RH | 0 - 10 V
Ri > 10K ohm Ho nepahala +/- 0,3% FS |
Litlhaloso tsa relay ea ho kenya le ho tsoa
| Kenyelletso le tlhahiso litlhaloso | Kenyeletso/ tlhahiso | Tlhaloso |
| Kenyelletso ea dijithale | DI1 DI2 | Letšoao le tsoang mesebetsing e omileng ea ho ikopanya Litlhoko tsa mabitso: Ho roala khauta Bolelele ba cable bo tlameha ho ba boholo. 15 m
Sebelisa li-relay tse thusang ha thapo e le telele Bula loop: 12 V (SELV) Kopana le 3.5 mA |
| Kenyelletso ea dijithale | DI3 | 115 V / 230 V AC |
| Sehlahisoa se tiileng | DO1 (bakeng sa khoele ea AKV) | 115V / 230 V AC Max. 0.5 A
Max. 1 x 20 W AKV bakeng sa 115 V AC 2 x 20 W AKV bakeng sa 230 V AC Hlokomela: Likhoeli tse 2 tsa EC ha li tšehetsoe. |
| Li-relay | DO2 DO3 DO4 DO5 DO6 | 115 V / 230 V AC
Boholo ba mojaro: CE. 8 (6)A UL. 8A res. 3FLA 18LRA Monyetla o monyenyane: 1VA Inrush: DO5 DO6 TV-5 80A |
| Analogue output/ PWM | AO1 | 0 / 10 V Pulse Width Modulated (PWM) max. 15 mA.
0 - 10 V e fetohang, boholo. 2 mA |
HLOKOMELA:
- DO2 ho DO6 ke li-relay tse 16.
- Max. mojaro o tlameha ho hlokomeloa.
- DO5 / DO6 e khothaletsoa bakeng sa mojaro o nang le inrush e phahameng joalo ka EC Fan le leseli la LED.
- Li-relay tsohle li tiisitsoe hore li sebelisoe ka sehatsetsi se tukang joaloka Propane R290.
- Ho lumellana le EN 60 335-2-89: 2010 Annex BB.
Lintlha tsa tšebetso
| Lintlha tsa tšebetso | Boleng |
| Pontšo | LED 3 linomoro |
| Pontšo ea kantle, AK-CC55 Single Coil UI | Pontšo e 1 ea kantle |
| Pontšo ea kantle, AK-CC55 Single Coil | 2 lipontšo tsa kantle |
| Khokahano ea ponts'o ea kantle | RJ12 |
| Max. bonts'a bolelele ba mohala [m] | 100 m |
| Khokahano ea data e hahelletsoeng | MOHAPI |
| Khetho ea puisano ea data | AK-OB55 Lon RS485 module (Eseng AK-CC55 Compact) |
| Tšireletso ea matla a betri ea oache | 4 matsatsi |
| Ho phahamisa | DIN seporo |
Maemo a tikoloho
| Maemo a tikoloho | Boleng |
| Mocheso o fapaneng oa tikoloho, o sebetsa [°C] | 0 – 55 °C |
| Boemo ba mocheso oa tikoloho, lipalangoang [°C] | -40 - 70 °C |
| Kakaretso ea boemo ba IP | IP20 |
| Mongobo o amanang [%] | 20 - 80%, e sa fokotseng |
| Ho thothomela/ho thothomela | Ha ho litšisinyeho le lithothokiso tse lumelletsoeng |
Lerata la motlakase
Lithapo tsa li-sensor, molumo o tlasetagLisebelisoa tsa DI le puisano ea data li tlameha ho bolokoa li arohane le likhoele tse ling tsa motlakase:
- Sebelisa literei tsa cable tse arohaneng
- Boloka sebaka se pakeng tsa likhoele bonyane 10 cm
- Lithapo tse telele ka lebelo le tlasetage DI input e lokela ho qojoa
Mehopolo ea ho kenya
Tšenyo ea tsietsi, ho se kenngoe hantle, kapa maemo a sebaka sa marang-rang, a ka baka ho se sebetse hantle ha sistimi ea taolo, 'me qetellong ea baka ho senyeha ha semela. Tšireletso e 'ngoe le e 'ngoe e ka khonehang e kenyelelitsoe lihlahisoa tsa rona ho thibela sena. Leha ho le joalo, kemiso e fosahetseng e ntse e ka hlahisa mathata. Litaolo tsa elektroniki ha li nke sebaka sa tloaelo e ntle ea boenjiniere. Danfoss e ke ke ea ikarabella bakeng sa thepa leha e le efe, kapa likarolo tsa semela, tse senyehileng ka lebaka la liphoso tse ka holimo. Ke boikarabello ba motho ea kenyang letsoho ho hlahloba ho kenya ka botlalo, le ho lumellana le lisebelisoa tse hlokahalang tsa tšireletso. Ho buuoa ka ho khetheha mabapi le tlhokahalo ea lipontšo ho molaoli ha compressor e emisoa le tlhokahalo ea ba amohelang metsi pele ho li-compressor. Moemeli oa hau oa lehae oa Danfoss o tla thabela ho u thusa ka likeletso tse ling, joalo-joalo.
Ho fetola AK-CC 550A ka AK-CC55
Ela hloko ha u fapanyetsana molaoli oa AK-CC 550A ka molaoli e mocha oa AK-CC55 - melao-motheo e mecha ea wiring!
- Sensor ea khatello e na le khokahano e ncha - lets'oao le fatše lia fetoloa
- Li-relay tsa SPDT li na le sekema se secha sa likhoele - NO le li-terminals tsa NC lia fetoloa (mohlala, hitara ea defrost ha e lokela ho tima)
- Modbus e na le sekema se secha sa khokahano (A, B le skrini)
- Lipontšo tse ncha tsa AK-UI55 le lithapo tse nang le lithapo tse 6 khahlano le lithapo tse 4 bakeng sa EKA 16x
AK-CC55 ha e tšehetse likhoele tse peli tsa EEC tse hokahaneng le tlhahiso e le 'ngoe ea AKV. Transmitter ea khatello e ka arolelanoa lipakeng tsa AK-CC 550 le AK-CC55. Khokahano ea DI2 ea defrost e ka kengoa lipakeng tsa AK-CC 550 le AK-CC55.
Ts'ebetso e nang le ponts'o ea litlhophiso
Hlahisa AK-UI55 Sete
Litekanyetso li tla bontšoa ka linomoro tse tharo, 'me ka tlhophiso u ka tseba hore na mocheso o lokela ho bontšoa ho °C kapa °F.
Pontšo e ka fana ka melaetsa e latelang:
- Defrost e ntse e tsoela pele
- Thempereichara e ke ke ea hlahisoa ka lebaka la phoso ea sensor
- Pontšo ha e khone ho kenya data ho tsoa ho molaoli. Hakolla ebe o hokela pontsho hape
- Puisano ea ponahatso e lahlehileng
- Konopo ea alamo e kentsoe tšebetsong. Joale ho tla bontšoa khoutu ea pele ea alamo
- Boemong bo kaholimo ba lenane kapa ha boholo. boleng bo fihletsoe, li-dashe tse tharo li bonts'oa hodimo ho pontsho Boemong bo ka tlase ba menu kapa ha min. boleng has
- e fihletsoe, li-dashes tse tharo li bonts'oa botlaaseng ba ponts'o Configuration e notletsoe. Notlolla ka ho tobetsa (bakeng sa metsotsoana e 3) ho 'motsu o holimo' le 'motsu o theohang'
- ka nako e le nngwe
- Sebopeho se notletsoe
- Paramethara e fihlile ho min. kapa max. moeli
- Ho hlokahala password bakeng sa ho kena ho menu
- Ho hloekisoa ha lisebelisoa ho se ho qalile. Batšehetsi baa matha
- Ho hloekisoa ha lisebelisoa ho kentsoe tšebetsong 'me sesebelisoa se ka hloekisoa
- Sesebelisoa se seholo se setetsoe ho Off
- Sesebelisoa se seholo se behiloe ho ts'ebeletso / ts'ebetso ea matsoho
- Li-flash: E tla bonts'a ha ho ka ba le alamo ea ho lutla ha sehatsetsing, empa ha feela sehatsetsi se etselitsoe CO2.
Boemo ba feme
Haeba o hloka ho khutlela ho lifeme-set values, etsa se latelang:
- Fokotsa phepelo voltage ho molaoli
- Boloka "∧" le "∨" likonopo tsa motsu li tepeletse ka nako e le 'ngoe ha u ntse u hokahanya matla a phepelo.tage
- Ha FAc e hlaha skrineng, khetha "ee".
Ho hlophisoa ha li-parameter ts'ebetsong ea pontšo
| HLOKOMELA | ||
| Beha | ||
| (PS) | < | |
| cFg | HLOKOMELA | |
| < | ||
| r- | Lihlopha tsa menu
Bona le maqephe a latelang. |
|
| A– | ||
| c– | ||
| D- | ||
| n– | ||
| F– | ||
| t- | ||
| h– | ||
| o– | ||
| p– | ||
| q– | ||
| u- | ||
| < |
| r12 | Phetoho e kholo |
| o61 | Kopo |
| o03 | MODBUS aterese |
| r89 | Mofuta oa lijo |
| r00 | Mocheso o khaotsoeng |
| r15 | Moo. sensor S4 % |
| r61 | Moo. Sensor S4% bosiu |
| A36 | Sensor sa alamo S4% |
| o17 | Hlahisa moea S4% |
| o30 | Mofuta oa sehatsetsing |
| o20 | Min. sebaka se fetisang |
| o21 | Max. sebaka se fetisang |
| d01 | Mokgwa wa ho qhibidiha |
| d03 | Karohano ea defrost |
| d10 | Sensor ea defrost |
| d04 | Max. defrost nako |
| d02 | Defrost setopong mocheso |
| < |
| < | Konopo ea lintlha,
3 s: Tlhahisoleseding bakeng sa tshebediso ya tshebeletso |
||||||||
| Inf | |||||||||
| StA | HLOKOMELA | Sheba molaetsa oa boemo ba taolo
Sheba sesebelisoa se khethiloeng |
|||||||
| App | HLOKOMELA | ||||||||
| in | HLOKOMELA | di1/ AI7 | ** | Bala boemo ba ho kenya | |||||
| tsoa | HLOKOMELA | do1 | Akv | Bala boemo ba tlhahiso | di2 | ** | |||
| buS | HLOKOMELA | MODBUS boleng
Sheba mofuta oa SW |
do2 | * | di3 | ** | |||
| SoF | HLOKOMELA | do3 | * | EA-1-AI | PE | ||||
| < | do4 | * | EA-2-AI | S2 | |||||
| (Khutla)
Boemo ba ho tsoa Ha o batla lintlha ka relay |
do5 | * | EA-3-AI | S3 | |||||
| do6 | * | EA-4-AI | S4 | ||||||
| Ao1 | * | EA-5-AI | S5 | ||||||
| tlhahiso, letheba le tla bontša (Khutla)
hore na relay e kentsoe tšebetsong (matla) bakeng sa, mohlala: |
EA-6-AI | ** | |||||||
| < | |||||||||
Qala hantle
Ka mokhoa o latelang o ka qala taolo kapele haholo:
- Bula paramethara r12 'me u emise molao (ka yuniti e ncha le e sa beoang pele, r12 e tla be e se e behiloe ho 0 ho bolelang hore taolo e emisitsoeng)
- Khetha ts'ebeliso e ipapisitseng le litšoantšo tsa marang-rang leqepheng la 2-4
- Bula parameter o61 ebe u beha nomoro ea kopo
- Bakeng sa marang-rang. Beha aterese ho o03
- Ebe u khetha sete ea li-presets ho tsoa tafoleng ea thuso ea "Mofuta oa Lijo".
- Bula paramethara r89 ebe u beha nomoro bakeng sa letoto la li-presetting. Litlhophiso tse 'maloa tse khethiloeng joale li tla fetisetsoa ho menu
- Beha mocheso o lakatsehang oa ho khaola r00
- Beha mocheso oa moea oa thermostat o boima pakeng tsa S4 le S3 sensor r15
- Beha mocheso oa moea oa thermostat o boima pakeng tsa S4 le S3 nakong ea ts'ebetso ea bosiu r61
- Beha mocheso oa moea oa alamo o boima pakeng tsa S4 le S3 A36
- Beha palo ea ponts'o e boima lipakeng tsa S4 le S3 o17
- Khetha sehatsetsing ka parameter o30
- Beha mochini o fetisang khatello min. le max. sebaka ka parameter o20 le o21
- Beha mokhoa o lakatsehang oa defrost ho d01
- Beha nako ea nako pakeng tsa defrost e qala ka d03
- Beha sensor e lakatsehang ea defrost ho d10
- Beha nako e phahameng ea ho qhibiliha ho d04
- Beha mocheso oa setomo sa defrost ho d02
- Bula parameter r12 'me u qale molao
- Tsamaea ka lethathamo la li-parameter 'me u fetole litekanyetso tsa fektheri moo ho hlokahalang.
- Etsa hore selaoli se sebetse marang-rang:
- MODBUS: Kenya ts'ebetso ea scan ninete ho yuniti ea sistimi
- Haeba karete e 'ngoe ea puisano ea data e sebelisoa ho molaoli:
- Lon RS485: Kenya ts'ebetso o04
- Ethernet: Sebelisa aterese ea MAC
Mofuta oa lijo
| Tlhophiso ea li-presettings (r89). Ka mor'a ho beha 1-5,
setting e khutlisetsoa ho 0. Mofuta oa lijo = |
1
Meroho- litafole |
2
Lebese |
3
Nama / tlhapi |
4
Lijo tse hatsetseng |
5
Ice cream |
| Mocheso (r00) | 8 °C | 0 °C | -2 °C | -20 °C | -24 °C |
| Max. temp. tlhophiso (r02) | 10 °C | 4 °C | 2 °C | -16 °C | -20 °C |
| Min. temp. tlhophiso (r03) | 4 °C | -4 °C | -6 °C | -24 °C | -28 °C |
| Moeli o kaholimo oa alamo (A13) | 14 °C | 8 °C | 8 °C | -15 °C | -15 °C |
| Tekanyetso e tlase ea alamo (A14) | 0 °C | -5 °C | -5 °C | -30 °C | -30 °C |
| Moeli o kaholimo oa alamo bakeng sa S6 (A22) | 14 °C | 8 °C | 8 °C | -15 °C | -15 °C |
| Moeli o tlase oa alamo bakeng sa S6 (A23) | 0 °C | -5 °C | -5 °C | -30 °C | -30 °C |
Molaetsa wa phoso
| Molaetsa wa phoso | ||
| Boemong ba phoso, alamo ea LED e ka pele e tla buloa 'me mohala oa alamo o tla kengoa tšebetsong (ho ipapisitse le lintho tse tlang pele).
Haeba o tobetsa konopo ea alamo metsotsoana e 3 o ka bona tlaleho ea alamo skrineng. (Lintho tse tlang pele ka tlhokomeliso li ka fetoloa. Sheba Bukana ea Mosebelisi.) Melaetsa e ka hlahang ke ena: |
||
| Khoutu | Mongolo oa alamo | Tlhaloso |
| E01 | Ho hloleha ha lisebelisoa | Mookameli o na le ho hlōleha ha hardware |
| E06 | Nako e lahlehileng ea oache | Oache e lahlehetsoe ke nako e nepahetseng |
| E20 | Ke Evap. khatello A - Phoso ea kutlo | Lets'oao la kutlo ha le na sebaka. Ka kopo, lekola sensor bakeng sa ts'ebetso e nepahetseng |
| E24 | S2 Gas outlet A - Phoso ea kutlo | Lets'oao la kutlo ha le na sebaka. Ka kopo, lekola sensor bakeng sa ts'ebetso e nepahetseng |
| E25 | S3 Air ON evap. A – Phoso ea kutlo | Lets'oao la kutlo ha le na sebaka. Ka kopo, lekola sensor bakeng sa ts'ebetso e nepahetseng |
| E26 | S4 Air OFF evapop. A – Phoso ea kutlo | Lets'oao la kutlo ha le na sebaka. Ka kopo, lekola sensor bakeng sa ts'ebetso e nepahetseng |
| E27 | S5 Evaporator A – Phoso ea kutlo | Lets'oao la kutlo ha le na sebaka. Ka kopo, lekola sensor bakeng sa ts'ebetso e nepahetseng |
| E28 | Mocheso oa sehlahisoa sa S6. A – Phoso ea kutlo | Lets'oao la kutlo ha le na sebaka. Ka kopo, lekola sensor bakeng sa ts'ebetso e nepahetseng |
| E34 | S3 Air ON evap. B - Phoso ea kutlo | Lets'oao la kutlo ha le na sebaka. Ka kopo, lekola sensor bakeng sa ts'ebetso e nepahetseng |
| E37 | S5 Evaporator B – Phoso ya kutlo | Lets'oao la kutlo ha le na sebaka. Ka kopo, lekola sensor bakeng sa ts'ebetso e nepahetseng |
| E59 | Sensor ea mongobo - Phoso ea kutlo | Lets'oao la kutlo ha le na sebaka. Ka kopo, lekola sensor bakeng sa ts'ebetso e nepahetseng |
| A01 | Alamo ea mocheso o phahameng A | Thempereichara ea alamo e bile kaholimo ho moeli o moholo oa alamo ka nako e telele ho feta tieho ea alamo e behiloeng. |
| A02 | Alamo ea mocheso o tlase A | Thempereichara ea alamo e bile ka tlase ho moeli oa alamo ea min ka nako e telele ho feta ho lieha ha alamo e behiloeng. |
| A04 | Alamo e butsoeng ea monyako | Monyako o butsoe nako e telele haholo |
| A05 | Nako e phahameng ea ho emisa defrost e fetile | Selaoli se emetse nako e telele ho feta e lumelletsoeng ka mor'a ho qhibiliha ho hokahaneng. |
| A11 | Sehatsetsi ha sea khethoa | Sehatsetsi ha se e-s'o khethiloe kahoo taolo e ke ke ea qalisoa |
| A13 | Mocheso o phahameng oa sehlahisoa sa S6 A | Thempereichara ea Sehlahisoa sa S6 esale e le kaholimo ho moeli o moholo oa alamo ka nako e telele ho feta tieho ea alamo e behiloeng. |
| A14 | S6 mocheso o tlase oa sehlahisoa A | Thempereichara ea Sehlahisoa sa S6 e bile ka tlase ho moeli oa alamo ea min ka nako e telele ho feta ho lieha ha alamo e behiloeng. |
| A15 | Alamo ea DI 1 | Letšoao la alamo le tsoang ho lets'oao la ho kenya la dijithale |
| A16 | Alamo ea DI 2 | Letšoao la alamo le tsoang ho lets'oao la ho kenya la dijithale |
| A45 | Sesebelisoa se seholo se TLOA | Selaoli sa manin switch se behiloe ho Stop kapa Manaual control. Ntle le moo, keno ea dijithale e etselitsoeng tšebetso ea "main switch", e emisitse taolo |
| A59 | Nyeoe ka mokhoa oa ho hloekisa | Ts'ebetso ea ho hloekisa khese e se e qalitsoe nyeoeng |
| A70 | Alamo ea mocheso o phahameng oa B | Thempereichara ea alamo e bile kaholimo ho moeli o moholo oa alamo ka nako e telele ho feta tieho ea alamo e behiloeng. |
| A71 | Alamo ea mocheso o tlase B | Thempereichara ea alamo e bile ka tlase ho moeli oa alamo ea min ka nako e telele ho feta ho lieha ha alamo e behiloeng. |
| AA2 | Ho dutla ha CO2 ho fumanwe | CO2 e lutla tsamaisong ea sehatsetsing |
| AA3 | Ho fumanwa ho dutla ka sehatsetsing | Sehatsetsi se lutla ho tsoa tsamaisong ea sehatsetsi |
| a02 | Alamo ea mongobo o phahameng | Boemo ba mongobo bo holimo haholo |
| a03 | Alamo ea mongobo o tlase | Boemo ba mongobo bo tlase haholo |
| a04 | Tlhophiso e fosahetseng ea IO | Lintho tse kenang le tse hlahisoang ha lia hlophisoa ka nepo |
| X02 | Evaporator e ntse e phahama | Ts'ebetso e ikamahanyang le serame e lemohile leqhoa le leholo holim'a mouoane. |
| X03 | Khase ea flash e fumanoe | Ts'ebetso ea adaptive defrost e bone khase e boima ka pel'a valve ea ente |
| Z01 | Nako e phahameng ea ho qhibiliha e feta A | Potoloho ea ho qetela ea defrost e emisitse ka nako ho fapana le mocheso o behiloeng |
| A34 | Alamo ea fan | Alamo e tsoang ho ts'ebetso ea ho beha leihlo lintlha tsa dijithale |
| A43 | Alamo ea mokhanni oa valve | Alamo e tsoang ho ts'ebetso ea ho beha leihlo lintlha tsa dijithale |
| Khokahano ea data: Bohlokoa ba lialamo tsa motho ka mong bo ka hlalosoa ka maemo. Litlhophiso li tlameha ho etsoa sehlopheng sa "Alarm destinations" | ||
Litokomane / Lisebelisoa
 |
Danfoss 084B4082 AK-CC55 Single Coil Case Controller [pdf] Tlhophiso Tataiso 084B4082, AK-CC55 Single Coil Case Controller, Single Coil Case Controller, Coil Case Controller, 084B4082, Case Controller |
