CRUX CS-PRS3 Integration Interface
Sehlahisoa le Likarolo
- Ka morao & Pele View Lisebelisoa tsa khamera
- Khetho ea khetho ea khouto ea ParkAssist ho retrofit factory PDC
- Fetola skrini ka bo eona ho ea ka morao-view ha Gear ea Reverse e kentsoe le ho khamera e ka pele view ha lisebelisoa li kenngoa ho khanna
- Ho kenya letsoho khamera e ka pele ho sebelisa konopo ea ho laola lebili
- Ho kenya Plug & Play.
Likarolo tse kenyelelitsoeng
CS-PRS3 Mojule
CS-PRS3 Harness
KEKELO MOTELELI
Iketsetse SWTCH LITLHAKISO
| Navigation Tsamaiso | KOTSA 1 | EA-2-DIP | EA-3-DIP | EA-4-DIP | EA-5-DIP | EA-6-DIP |
| PCM3 | TLOA | ON | TLOA | TLOA | TLOA | TLOA |
| PCM3.1 | TLOA | ON | TLOA | TLOA | TLOA | ON |
DIP SWITCH MESEBETSI:
- DIP 1 = Chate Ka holimo
- DIP 2 = BUTSE bakeng sa Aftermarket Rear View Khamera / OFF bakeng sa OEM Ka morao View Khamera
- DIP 3 = Ka morao View Khoutu ea khamera.
- DIP 4 = ParkAssist Coding bakeng sa litsamaiso tsa PCM3.1 feela (sheba leqephe la 4)
- DIP 5 = Khamera/ParkAssist Coding .
- DIP 6 = CAN Ho Felisoa ha Libese.
LIEKETSENG LITS'ELISO
Module ea interface e kentsoe ka mor'a headunit
HOKOLA MODULE WA INTEFACE
- Tlosa headunit.
- Hokela sehokelo sa basali sa 12-Pin Molex sa CS-PRS3 T-harness mojulung oa interface.
- Ntša sehokelo sa basali sa Quadlock ka mor'a hlooho 'me u se hokele ho CS-PRS3 T-harness.
- Hokela Quadlock e tona ea CS-PRS3 T-harness ho headunit.
KHOKOLA MOKHATLO VIEW CAMERA E lumellana le lik'hamera tsa NTSC feela
Haeba OEM e ka morao-view kh'amera e tla sebelisoa, e hokele RCA e tona e ngotsoeng "OEM Rear-View Khamera" ho RCLabeled "Rear-View Khamera".
HO HOKAHA AFTERMARKET CAMERAS E tsamaisana le lik'hamera tsa NTSC feela
- Haeba u sebelisa aftermarket morao-view kh'amera, kenya kh'amera ea morao-rao ka mor'a koloi 'me u tsamaise thapo ho leba radiong.
- Hokela RCA e tona ea 'maraka o ka morao-raoview ho fihla ho RCA e motšehali e ngotsoeng ka Morao View Khamera.
- Hokela terata e GREEN ho T-harness ho terata ea motlakase ea 12V ea khamera e rekisoang ka morao.
- Mohala o GREEN o tla fana ka matla a 12 volts ho khamera ha lisebelisoa tse ka morao li kenngoa.
- Matla a tla tima ka bohona ha gear e le setto drive mme lebelo le fihla ho 12 MPH.
- Haeba khoebo ea morao-rao e ka pele-view kh'amera e tla sebelisoa, kenya khamera ho latela litaelo tsa ho instola tsa moetsi 'me u tsamaise thapo ea katoloso ho ea seea-le-moeeng.
- Hokela RCA e tona ea 'maraka o ka morao-raoview fihla ho RCA ea mosali e ngotsoeng Front View Khamera.
- Hokela terata e TŠOEU ho T harness ho terata ea motlakase ea 12V ea khamera e rekisoang ka morao.
- Mohala o mosoeu o tla fana ka matla a 12 volts ho khamera ha gear e behiloe ho khanna. Matla a tla tima ka bohona ha lebelo le fihla ho 12 MPH.
HO KHOUTA RADIO BAKENG SA MOSEBETSI OA KAKAMERA
Litsamaiso tsa PCM3 1
Hoa hlokahala ho kenya khoutu e ka morao-view tlhahiso ea k'hamera ea sistimi ea PCM3.1 bakeng sa tšebeliso e nang le bokamorao ba 'maraka view khamera.
Likonopo tsa Lebili la Tsamaiso ka lehlakoreng le letšehali 
Likonopo tsa Lebili la Tsamaiso ka lehlakoreng le letona
- Laeta ho bulela.
- Ema ho fihlela headunit e qala ka ho feletseng 'me e le skrineng sa lapeng.
- Etsa bonnete ba hore li-LED tse mojuleng oa li-interface lia bonahala nakong ea ts'ebetso ena. Li-LED li ka har'a mojule 'me li bonahala ka lehlakoreng la sehokelo sa monna oa 8-pin Molex.
- Ka kopo hlokomela tatelano e nepahetseng ea likhoutu
- Pele o tobetsa 'me u tšoare HASH KEY/MODE ebe u tobetsa 'me u tšoare konopo ea PICK UP.
- Tsoela pele ho tšoara likonopo ka bobeli 'me u hlahlobe hore na li-LED tse RED le BLUE lia panya.
- Sistimi ea PCM e tla qala hape kamora metsotsoana ea 5-10
- Lokolla likonopo ka bobeli.
- Li-LED tse RED le BLUE li tla khantša li tiile.
- Ka morao View Khamera e tla hlaha ho khetho ea menyetla ea seea-le-moea ka mor'a ho khouta ka katleho.
Ho tsebahatsa morao-rao view khamera ho tswa ho tsamaiso latela mehato e ka tlase
- Laeta ho bulela.
- Ema ho fihlela headunit e qala ka ho feletseng 'me e le skrineng sa lapeng.
- Etsa bonnete ba hore li-LED tse mojuleng oa li-interface lia bonahala nakong ea ts'ebetso ena.
- Li-LED li ka har'a mojule 'me li bonahala ka lehlakoreng la sehokelo sa monna oa 8 pin Molex.
- Ka kopo hlokomela tatellano e nepahetseng ea li-decoding: Tobetsa pele 'me u tšoare konopo ea HASH KEY/MODE ebe u tobetsa le ho tšoara konopo ea HANG UP.
- Tsoela pele ho tšoara likonopo ka bobeli 'me u hlahlobe hore na li-LED tse RED le BLUE lia panya. Sistimi ea PCM e tla qala hape kamora metsotsoana ea 5-10.
- Lokolla likonopo ka bobeli.
- Li-LED tse RED le BLUE li tla khantša li tiile.
- Ka morao View Khamera ha e sa tla hlola e hlaha lethathamong la seea-le-moea ka mor'a ho etsa decoding ka katleho.
HO KHOUTA RADIO BAKENG SA MOSEBETSI OA PARKASSISTANT
Sistimi ea PCM3
Hoa hlokahala ho kenya khoutu ParkAssist ea tsamaiso ea PCM3.1 ho khutlisetsa PDC ea fektheri.
Likonopo tsa Lebili la Tsamaiso ka lehlakoreng le letšehali 
Likonopo tsa Lebili la Tsamaiso ka lehlakoreng le letona
- Laeta ho bulela.
- Ema ho fihlela headunit e qala ka ho feletseng 'me e le skrineng sa lapeng.
- Etsa bonnete ba hore li-LED tse mojuleng oa li-interface lia bonahala nakong ea ts'ebetso ena.
- Li-LED li ka har'a mojule 'me li bonahala ka lehlakoreng la sehokelo sa monna oa 8-pin Molex.
- Ka kopo hlokomela tatelano e nepahetseng ea likhoutu.
- Tobetsa pele 'me u tšoare konopo ea BACK ebe u tobetsa 'me u tšoare konopo ea PICK UP.
- Tsoela pele ho tšoara likonopo ka bobeli 'me u hlahlobe hore na li-LED tse RED le BLUE lia panya.
- Sistimi ea PCM e tla qala hape kamora metsotsoana ea 5-10.
- Lokolla likonopo ka bobeli.
- Li-LED tse RED le BLUE li tla khantša li tiile.
- ParkAssist" e tla hlaha ho khetho ea menyetla ea seea-le-moea ka mor'a ho kenya likhoutu ka katleho.
Ho khetholla ParkAssist ho tsoa ho sistimi, latela mehato e ka tlase.
- Laeta ho bulela
- Ema ho fihlela headunit e qala ka ho feletseng 'me e le skrineng sa lapeng.
- Etsa bonnete ba hore li-LED tse mojuleng oa li-interface lia bonahala nakong ea ts'ebetso ena. Li-LED li ka har'a mojule 'me li bonahala ka lehlakoreng la sehokelo sa monna oa 8-pin Molex.
- Ka kopo hlokomela tatelano e nepahetseng ea li-decoding: Tobetsa pele 'me u tšoare konopo ea BACK ebe u tobetsa le ho tšoara konopo ea HANG UP. Tsoela pele ho tšoara likonopo ka bobeli 'me u hlahlobe hore na li-LED tse RED le BLUE lia panya. Sistimi ea PCM e tla qala hape kamora metsotsoana ea 5-10.
- Lokolla likonopo ka bobeli.
- Li-LED tse RED le BLUE li tla khantša li tiile.
- ParkAssist ha e sa tla hlola e bonts'a khethong ea menyetla ea seea-le-moea ka mor'a ho etsa decoding ka katleho.
HO KHOUTA seea-le-moea-pono BAKENG SA LIKOLOI MOSEBETSI OA MOLAOLI OA SITIRO
Litsamaiso tsa PCM3.1
Hoa khoneha ho khouta le ho khetholla seea-le-moea bakeng sa thekiso ea morao-rao.view khamera le ParkAssist e sebetsa likoloing tse se nang li-control mabili. Sena se etsoa ho sebelisoa DIP switjha #3, #4 le #5.
| DIP# | MOSEBETSI | ON | TLOA |
| 3 | Ka morao-View Khamera | Khoutu | Decoding |
| 4 | ParkAssist | Khoutu | Decoding |
| 5 | Ts'ebetso ea Ts'ebetso ea Coding/Decoding | 5sec=Qalo | Tlhophiso ea kamehla |
- Beha DIP #5 ho TIMA.
- Laeta ho bulela.
- Ema ho fihlela headunit e qala ka ho feletseng 'me e le skrineng sa lapeng.
- Etsa bonnete ba hore li-LED tse mojuleng oa li-interface lia bonahala nakong ea ts'ebetso ena.
- Li-LED li ka har'a mojule 'me li bonahala ka lehlakoreng la sehokelo sa monna oa 8 pin Molex.
- Beha DIP #3 le DIP #4 ho ts'ebetso e lakatsehang ea khouto kapa decoding.
- Beha DIP #5 sebakeng sa ON bakeng sa metsotsoana e 5.
- Nakong ea tlhophiso, hlahloba hore na li-LED tse RED le BLUE lia panya.
- Sistimi ea PCM e tla qala hape kamora metsotsoana ea 5-10.
- Li-LED tse RED le BLUE li tla khantša li tiile.
- Ka morao View Khamera le/kapa ParkAssist” e tla hlaha ho menu ea seea-le-moeeng ka mor’a ho khouta ka katleho.
LINTLHA TSEO
- Ka mor'a ts'ebetso ea ho kenya likhoutu kapa ho etsa li-decoding, emela metsotsoana e 60 pele ho ka etsoa mokhoa o mong oa ho etsa likhoutu.
- Haeba ho na le PDC ea feme e teng ka koloing, beha DIP #4 ho boemo ba ON ha u ntse u khouta ho seng joalo PCD ea feme e tla etsoa decode.
CONINGTHE RADIO EOR MORAKOVIEW KAMERA KA PORSCHE CAYENNE WNITH PCM3 SYSTEM
| DIP# | MOSEBETSI | ON | TLOA |
| 3 | Ka morao-View Khamera | Khoutu | Decoding |
| 5 | ParkAssist | Khoutu | Decoding |
- Beha DIP #5 ho TIMA.
- Laeta ho bulela.
- Ema ho fihlela headunit e qala ka ho feletseng 'me e le skrineng sa lapeng.
- Etsa bonnete ba hore li-LED tse mojuleng oa li-interface lia bonahala nakong ea ts'ebetso ena.
- Li-LED li ka har'a mojule 'me li bonahala ka lehlakoreng la sehokelo sa monna oa 8-pin Molex.
- Beha DIP #3 ho ts'ebetso e lakatsehang ea ho khouta kapa ho decoding.
- Beha DIP #5 sebakeng sa ON bakeng sa metsotsoana e 5.
- Nakong ea tlhophiso, hlahloba hore na li-LED tse RED le BLUE lia panya. Sistimi ea PCM e tla qala hape kamora metsotsoana ea 5-10.
- Li-LED tse RED le BLUE li tla khantša li tiile.
- Ka morao View Khamera e tla hlaha ho khetho ea menyetla ea seea-le-moea ka mor'a ho khouta ka katleho.
HLOKOMELA
Ka mor'a ts'ebetso ea ho kenya likhoutu kapa ho etsa li-decoding, emela metsotsoana e 60 pele ho ka etsoa mokhoa o mong oa ho etsa likhoutu.
TLHOKOMELISO LED
| LED | BOEMO | TLHALOSO |
|
Boputsoa |
Leseli le Tiileng | NA Puisano ea Libese E KA LOKELA |
| Ho benya | KA BONA Lipatlisiso | |
|
Khubedu |
Leseli le Tiileng | Ka morao View Khamera e Khoutuoe |
| Ho benya | Ka moraoView Khamera e Decoded |
KHAMELA TS'EBETSO KA PELE
Tobetsa konopo ea HANG UP taolong ea lebili la setereng bakeng sa metsotsoana e 3 ho kenya kapa ho tima kh'amera e ka pele konopo ea ANG UP taolong ea lebili la setere bakeng sa metsotsoana e 3 ho kenya kapa ho tima kh'amera e ka pele.
LIKOPO TSA KOLOI
Porsche
- 2014 - 2016 Macan
- 2014 - 2016 911 GT3
- 2013 - 2016 911
- 2014 - 2016 Boxster
- 2009 - 2016 Cayenne
- 2014 - 2016 Cayman
- 2010 - 2016 Panamera
Hlokomela
- Ha e lumellane le likoloi tse nang le phetiso ea matsoho.
- PCM software version E TSHWANETSE ho ba 4.xx kapa ho feta.
- Karolo ea Video in Motion ha e sebetse sebapali sa video sa DVD se kahare
- Haeba kh'amera e na le khoutu 'me setšoantšo sa khamera e ka morao ha se qale, ka kopo etsa bonnete ba hore mamati 'ohle, sekoaelo, se koetsoe 'me mariki a ho paka ha a sebelisoe.
- Tlhaloso: PCM 3.1
- PCM 3 bakeng sa Cayenne Feela
Crux Interfacing Solutions 21541 Nordhoff St, Unit C, Chatsworth, CA 91311 mohala: 818-609-9299 fekse: 818-996-8188 www.cruxinterfacing.com
Litokomane / Lisebelisoa
 |
CRUX CS-PRS3 Integration Interface [pdf] Litaelo CS-PRS3, Sehokelo se Kopanetsoeng, Sehokahanyi sa CS-PRS3, Sehokelo |
