CP PLUS CP-VTA-F1043 Bukana ea Mosebelisi e Thehiloeng ka Menoana ea Nako ea ho ba Teng

Lebitso la Sehlahiswa: CP-VTA-F1043 Fingerprint-Based Time Attendance
Mofuta: 1.0.1
Tsebiso ea Sefahleho: Advanced technology for accurate verification in various lighting conditions

Letlapa la dikonopo: User-friendly keypad with multiple functions
Phetisetso ea Lintlha: USB flash drive or TCP/IP for data download and upload

Litaelo tsa Tšebeliso ea Sehlahisoa

Seo u lokelang ho se etsa le seo u sa lokelang ho se etsa

Qoba Khanya e Otlolohileng ea Letsatsi: Do not place the machine in direct sunlight to prevent interference with fingerprint recognition.

Facial Recognition Performance: The facial identification module works effectively in both low-light and bright-light environments.

Keypad

The keypad includes various functions such as switching input methods, backspace, exiting input mode, and inserting a space.

Lenane

To access the menu, press the MENU button and navigate to different options like Register, Set COMM, etc.

Ngodisa

Tobetsa MENU ebe u khetha 'Register'.
Follow on-screen instructions to input ID, name, register finger, password, card, and assign admin privileges.

Set COMM

Tobetsa MENU ebe u khetha 'Set COMM'.
Explore options like U-down for data downloading using a USB flash drive or TCP/IP.

LIEKETSENG

Kea leboha ka ho khetha sehlahisoa sa batho ba tlang ho CP PLUS. Pele re sebelisa sehlahisoa sena, re eletsa ka matla ho bala tokomane ena ka hloko ho netefatsa tšebeliso e nepahetseng.

Tokomane ena e fana ka litaelo tse qaqileng mabapi le mokhoa oa ho sebelisa sesebelisoa sa ho ba teng, ho tsepamisitsoe maikutlo litlhophisong tsa sona tsa kamehla, ho thusa basebelisi ho utloisisa ka potlako likarolo le tšebetso ea sona.
Hlokomela- Likahare tsa tokomane ena li ka fetoha ka lebaka la lintlafatso tsa software ea sehlahisoa le maano a khampani, 'me liphetoho tse ling li ka etsahala ntle le tsebiso pele ho basebelisi.

Seo u lokelang ho se etsa le seo u sa lokelang ho se etsa

Qoba Khanya e Otlolohileng ea Letsatsi:

Do not place the machine in direct sunlight, as excessive light may interfere with fingerprint recognition and cause verification failures.

Facial Recognition Performance:

The facial identification module uses advanced technology, enabling accurate facial verification in both low-light and bright-light environments.

Thempereichara ea ho sebetsa:

The recommended operating temperature is 0–45°C. Avoid using the device outdoors for extended periods, as prolonged exposure may affect performance.
If outdoor installation is necessary, ensure proper protection, such as using a sunshade and cooling equipment in summer, and heat preservation facilities in winter.

Keypad

Letlapa la likonopo le bontšitsoe setšoantšong se ka tlase.

Litaelo tsa Keypad

【ESC】: Exit or cancel an operation.
【HO LOKILE】: Netefatsa khetho.
【MENU】: Pressing this key will allow you to access the machine menu.
【▲】 le 【▼】: Hodimo le fatshe
【0】–【9】: You can press the ‘No.’ key to enter the system menu. It can also be used to input numbers when entering an IP address.

When entering a username:

【⊙ Mode】: Switch input methods.
【MENU】: Backspace or delete the last character.
【ESC】: Exit input mode.
【0】: Insert a space.

Lenane

The following options are available under the Menu section.
Ngodisa
Set COMM
Beha nako
E tsoetseng pele
Set bell
View Info

Ngodisa

The following options are available under the Register section.
New Reg.
Hlakola
All Enroll Data
Upload Reg. Data
Press the MENU button to access the menu, then select → ‘Register’.

New Reg

By following the steps below, you can register the new user.

Press the MENU button to access the menu, then select → ‘Register’ → Press OK → New Reg→ OK.
1. ID: Input ID using keyboard
2. Lebitso: Input username using keyboard
3. Monoana: Register finger, one finger 3 times
4. PWD: Ngolisa phasewete
5. Karete: Ngodisa karete
6. Motsamaisi: To assign user privileges, select the “Admin” option. By default, all registered users are assigned the User role.

If no administrator is set, any user will be able to access the menu. Assigning at least one Admin restricts menu access, ensuring the security of attendance data and the device.

Maemo a Tokelo:

【Admin】 (Administrator):
- Has full access to the menu and can operate the machine.
- If the administrator leaves, use the software to delete their account, or contact the seller to obtain the super administrator credentials and password.

【Sup. User】 (Super User): Can access the menu but is limited to operating the Register menu for adding or deleting users
【User】 (Normal User): Limited to attendance recording only; cannot access the menu.

Hlakola

Follow the steps below to delete all users, including Administrators, Super Users, and Normal Users. Press the MENU button to enter the menu → Select ‘Register’ → Delete → Select Delete → OK.
Tlhokomeliso: Before proceeding with deletion, ensure that all personnel information is backed up or uploaded to the software. Once deleted, the data cannot be recovered.

All Enroll Data

Follow the steps below to download employee names, card details, fingerprint data, and passwords to a USB flash drive in DAT format, either for backup or to transfer to another compatible device.
Press the MENU button to enter the menu → Select ‘Register’ → All Enroll Data → Select All Enroll Data → OK.

Upload Reg. Data

Follow the steps below to upload employee names, ID numbers, fingerprint data, and passwords to another compatible device.
Press the MENU button to access the main menu → Select ‘Register’ → Upload Reg. Data → Select Upload Reg. Data → OK.

Set COMM

The following options are available under the Set COMM menu.
U-down
TCP/IP
Press the MENU button to access the main menu → Select ‘Set COMM’.

U-down

Follow the steps below to assess the available options under the ‘U-Down’ menu.
Press the MENU button to access the main menu → Select ‘Set COMM’ → Press OK → U-down → OK.
Ho khoasolla Lintlha: Data from the device can be downloaded either using a USB flash drive or through TCP/IP.

Mehato ea ho Khoasolla Lintlha:

Press the 【MENU】 key to access the menu.
Navigate to 【Set COMM】 and select it.
Use a USB flash drive to download data directly from the machine.

Litlhoko tsa USB Flash Drive

Use a reputable brand of USB flash drive.
Ensure the drive is formatted to FAT32, with a capacity of 32GB or less.
The USB drive must be compatible with USB 1.0, 2.0, or 3.0.
Bohlokoa: Format the USB flash drive before downloading data.

Download Mehato:

Insert the USB flash drive into the USB port on the device.
Select 【Download Glog】 from the menu. The data will automatically be downloaded to the USB drive.
- Once the download is complete, remove the USB flash drive and insert it into a computer. The downloaded data will be available in a .txt file sebopeho.

Index of Download Options:

【Download Glog】: Only new attendance records, since the last download, will be saved in TXT format.
【Download AllGlog】: Download all attendance records from the device to the USB flash drive in TXT format.
【Download Slog】: Download the new administrative records to the USB flash drive in TXT format.
【Download AllSlog】: Download all administrative records to the USB flash drive in TXT format.

TCP/IP

Follow the steps below to configure the TCP/IP network settings: Press the MENU button to access the menu → Select ‘Set COMM’ → Press OK → Select ‘TCP/IP’ → Press OK.

a) TCP/IP

Sebelisa TCP/IP ho Hokela Software bakeng sa Khoasolla Lintlha

【DHCP】:

Ho joalo: When DHCP is enabled, the device will automatically obtain an IP address from the local

Marang-rang

Che: When DHCP is disabled, the IP address must be configured manually.

【IP Address】:

This IP address must be unique and valid within the user’s local network.
When connecting the device to the software, enter this IP address in the software.
If DHCP is enabled, the device will automatically obtain an IP address based on the local Network environment. However, the user can manually configure the IP address if desired.

➢ 【Subnet Mask】 & 【Default Gateway】:

If DHCP is enabled, these settings will be automatically configured based on the network Environment.
Users can also manually configure these settings if needed.

➢ 【Port NO.】:

Nomoro ea boema-kepe ea kamehla ke 5005.
When connecting the device to the software, enter this port number in the software.

b) Sete ea seva

Khetho ena e amana le web tlhophiso e thehiloeng ho seva. Bakeng sa tlhaiso-leseling e batsi, ka kopo ikopanye le Sehlopha sa Tšehetso sa Tekheniki sa CPPLUS.

DNS – Allows the device to connect to servers using domain names instead of IP addresses.
Lebitso la seva – Refers to the IP address or domain of the computer where attendance data is transmitted and managed.
IP ea seva – Displays the server’s IP address, which can be viewed and modified as needed.

Server Port No – Displays the server port number, which can be reviewed and modified if necessary.
Seva Req – The machine communicates with the server by sending data or requesting information, such as uploading attendance logs or verifying the connection status.

c) Net Mode

Sebaka sa heno: Used for local network (LAN) connections.
Marang-rang: Used for WAN, web-based connections. In Internet mode, users must follow our communication protocol for secondary development.

Beha Nako

Likhetho tse latelang lia fumaneha tlas'a khetho ea Beha nako.
Press the MENU button to enter the menu → Select ‘Set time’ → OK.
Tloaelo
NTP IP address
Sebaka sa Nako

Tloaelo

By following the steps below, you can manually set the machine’s date and time using the Custom option: Press the MENU button to enter the menu → Select ‘Set time’ → Press OK → Select ‘Custom’ → Press OK.

NTP IP Address

This setting allows the machine to synchronize its internal clock with a standard time source using the NTP server’s IP address, ensuring accurate timekeeping for employee attendance.
Press the MENU button to enter the menu → Select ‘Set time’ → Press OK → Select ‘NTP IP address’ → Press OK.

Sebaka sa Nako

This setting determines the local time used to record punch-ins and punch-outs. If the time zone is set incorrectly, the recording times may be inaccurate, which could affect attendance reports and payroll calculations.

Press the MENU button to enter the menu → Select ‘Set time’ → Press OK → Select ‘Time Zone’ → Press OK.

E tsoetseng pele

The following options are available under the Advanced option. Press the MENU button to access the menu → Select ‘Advanced’.
Tlhophiso e Akaretsang
Pele ho Setting
Lifate
LockCtrl

Tlhophiso e Akaretsang

The following options are available under the General Settings option.

Press the MENU button to enter the menu → Select ‘Advanced’ →Press OK → General Setting → OK
Machine ID: Assign a machine ID within the range of 1 to 255
Puo: Set the device language. The default language is ‘English’.

Sebopeho sa Letsatsi – Choose the machine’s date format to YMD, MDY, or DMY.
Voice Out – Press OK & “▲” “▼” to select Yes / No.
Bolumo – Adjust the volume of the device, with a range from 1 to 8.

Auto Off – Set the time for the device to automatically turn off in standby mode. The value can be set between 1 and 255 minutes. Selecting ‘No’ disables the auto-off feature.
Senotlolo sa Matla – Enable or disable the power key. When enabled, you can turn off the device using the power key; otherwise, this function is restricted.
Screen saver – Set the screen-off time for the device to save power when idle. With this option, you can set the screen-off time for the device.

Verify – Choose the login method for the device. Available formats include card, fingerprint, or password. Available formats are F/P/C, F+P, F+C, and C.
Card Format – Select the card number length (e.g., 8 digits or 10 digits) and choose the card number reading direction—either forward or reverse.

Pele ho Setting

The following options are available under the Advanced Settings option:

Press the MENU button to access the menu → Select ‘Advanced’ → Press OK → Advanced Setting → OK.
{Delete All Rec} – This action will delete all employee records (punch data) from the machine. Before proceeding, the system will prompt for confirmation with the message: “Are you sure you want to delete?”
{All Delete Data} – This action will delete all employee data, including their ID, name, fingerprints, and passwords. Before proceeding, the system will display a confirmation prompt: “Are you sure you want to delete?”

{Default Setting} – This action will reset all settings of the machine to their default values. You will need to reconfigure the machine after performing the reset.
{Update Firmware} – In this option, you can update the machine’s firmware using a USB flash drive.

Lifate

By following the steps below, you can access the following options under the Logs option. Press the MENU button to access the menu → Select ‘Advanced’ → Press OK → Logs → OK.

ARec Wrn – Admin Record Warning

This setting triggers a warning when the memory space drops below a specified threshold, alerting the user to download or manage data before storage is full.
Litlhophiso tsa pele: “NO” (0) – No warning is issued.
Sebaka: 1–255 – For example, ho e beha ho 255 ho bolela hore temoso e tla hlaha ha ho sala lirekoto tse 255 feela tsa sebaka sa memori, e leng se susumetsang mosebelisi ho nka khato pele memori e tlala.

URec Wrn – User Record Warning

This setting provides a warning when the user’s record memory drops below a set limit.

Litlhophiso tsa pele: 1000 – Warning is triggered when only 1000 records remain.
0 (“NO”) – Disables the warning.
Sebaka: 1–1500 – For example, ho e beha ho 1500 ho tsosa temoso ha ho setse memori ea 1500 feela.
ReVerify – Re-Verification Interval
E hlalosa a time window during which only the earliest attendance record is counted. Initial setting: 5 minutes – Only the first entry is recorded within this period.

0 (“NO”) – Disables the time window.
Sebaka: Metsotso e 1–255.

View User Rec – View Litlaleho tsa Basebelisi

Khetho ena e u lumella ho view litlaleho tsa basebetsi ka ho khetha letsatsi le itseng.

Lock CTRL

Ka ho latela mehato e ka tlase, o ka fihlella likhetho tse latelang tlasa khetho ea Lock CTRL.
Notlolla Nako
Mofuta oa Alamo
Alamo Ho lieha
Wiegan Bit
Weigan Data
Press the MENU button to access the menu → Select ‘Advanced’ → Press OK → LockCtrl → OK

This option allows you to set a specific period during which the machine remains unlocked. During this period, employees do not need to use their fingerprint, card, or password to access the machine.
Additionally, you can configure different unlocked periods for each day of the week, from Sunday to Saturday, based on your organization’s schedule.

Set Bell

Follow the steps below in this option to set the bell ring count and the direct bell time. Press the MENU button to access the menu → Select ‘Set bell’ → OK

Bala: E hlalosa hore na tšepe e tla lla ha kae ha e letsoa.
Sebaka: 1–255
ExampLe: Haeba e behiloe ho 10, tšepe e tla lla ha 10 nako le nako ha e kengoa tšebetsong. Sebedisa letlapa la dinomoro ho kenya palo eo o e batlang.
Nako: Specifies the exact time for the bell to ring. Use the “▲” and “▼” buttons to adjust the time. For example, haeba u beha nako ho 08:30, tšepe e tla lla ka bo-08:30.

View Info

Likhetho tse latelang li fumaneha tlasa ViewTlhahisoleseding kgetho.
Reg. Lintlha
Sebaka sa Mahala
Sehlahisoa
Press the MENU button to enter the menu → Select ‘ViewInfo’ → OK

Reg. Lintlha

By following the steps below, you can access the following options under the Reg. Data.
Press the MENU button to access the menu → Select ‘View Info’→ Press OK → Reg. Data → OK

User Reg – Defines the total number of users registered on the machine.
Manager Reg – Defines the total number of managers registered in the machine.
Monoana – Defines the total number of fingers registered in the machine.

Password – Defines the total number of passwords registered on the machine.
Karete – Defines the total number of cards registered in the machine.
User Rec – Defines the total number of user records stored in the machine.

Admin Rec – Defines the total number of admin records stored in the machine.

Sebaka sa Mahala

By following the steps below, you can access the following options under the Free Space.
Press the MENU button to access the menu → Select ‘View Info’→ Press OK → Free Space → OK

Monoana – Defines the total number of fingerprint slots remaining in the machine.
Password – Defines the total number of password slots remaining in the machine.
Karete – Defines the total number of card slots remaining in the machine.

User Rec – Defines the total number of user record slots remaining in the machine.
Admin Rec – Defines the total number of admin record slots remaining in the machine.

Sehlahisoa

By following the steps below, you can access the following options under the Product.

Press the MENU button to access the menu → Select ‘View Info’→ Press OK → Product → OK
Moetsi – Defines the manufacturer of the machine (CP PLUS).
Lebitso la Sesebelisoa – In this option, you can check the model number of the machine.

Nako ea ho Lokolla – Defines the release date of the machine.
Nomoro ea letoto – In this option, you can check the serial number of the machine.
Mofuta oa Firmware – In this option, you can check the firmware version of the machine.

Software Software – In this option, you can check the software version of the machine.

Tšebeletso ea bareki

Nomoro ea mohala 8800952952
Websebaka: www.cpplusworld.com
Email ID: sales@cpplusworld.com; support@cpplusworld.com

LBH

How do I delete all users?
1. To delete all users, including administrators, super users, and normal users.
2. Tobetsa MENU ho kenya lenane.
3. Select ‘Register’, then choose ‘Delete’ and confirm the deletion process.
Can I download employee data to a USB flash drive?
- Yes, you can download employee names, card details, fingerprint data, and passwords to a USB flash drive by navigating to ‘All Enroll Data’ in the Register menu.

Litokomane / Lisebelisoa

CP PLUS CP-VTA-F1043 Ho ba Teng Nako ea Monoana ho Thehiloe [pdf] Bukana ea Mosebelisi
CP-VTA-F1043, CP-VTA-F1043 Ho ba Teng Nako ho Thehiloe ke Monoana, Ho ba Teng Nako ho Thehiloe ke Monoana, Ho Thehiloe Nako ea ho ba Teng, Ho ba Teng Nako

Litšupiso

Bukana ea Mosebelisi

CP PLUS CP-VTA-F1043 Fingerprint-Based Time Attendance

Tlhahisoleseding ya Sehlahiswa