COMICA LinkFlix AD5 Audio e nang le likarolo tse ngata

Ketapele
Re leboha ho reka sebopeho sa audio sa Comica se nang le likarolo tse ngata tsa LinkFlex AD5

Likarolo tse ka Sehloohong

• 48kHz/24bit Audio Recording, Moralo oa li-interface tsa Dual XLR/6.35mm
• Tšehetso ea ho rekota / ho phallela mokhoa oa ho fetola le ho shebella ka ho toba
• Tšehetsa 48V Phantom Power Mics le Hi-Z Instruments Input
• Li-interface tse peli tsa USB-C bakeng sa ho hokela likhomphutha tse peli kapa lisebelisoa tsa mohala
• Li-interfaces tse ngata tsa I/O ho hokela Mehala, Matlapa le Likhomphutha
• Ho fihla ho 65dB Gain Range bakeng sa Tšebelisano e Pharalletseng ea Mic
• Phetoho ea AD/DA e etelletseng pele sehlopheng sa ho Fana ka Molumo o Hatetseng ka ho Fetisisa
• Motho ka mong Mic Preamps, Katara Amps, Lekola Bolumo le Phaello ea Sephetho
• Digital Signal Processing le Three EQ le Mekhoa ea Reverb bakeng sa Boqapi bo sa Lekanyetsoang
• E hlahisitsoe le Loopback bakeng sa Sampling, phallela le Podcasting
• Ts'ehetsa senotlolo se le seng sa Denoise le semumu, se bonolo ho se Sebelisa
• LCD Screen e nang le tlhaloso e phahameng bakeng sa Flexible le Intuitive Operation
• Battery ea Lithium e Hahelletsoeng ka hare, Nako ea Ts'ebetso Ho fihlela Lihora tse 6

Hlokomela

• Ha o sebetsa le lihlahisoa tse ling tse nang le kutlo e phahameng, ho kgothaletswa ho fetola phaello ea AD5 ho bonyane pele o e bulela.
  Basebelisi ba ka fetola phaello mohato ka mohato ho qoba tlhoro ea molumo kapa maikutlo a molumo.
• Pele o hokela / o hakolla maekrofono/seletsa, ka kopo tima 48V phantom power/Inst switch ho qoba ho senya lisebelisoa.
• Ka kopo bala bukana ena ea mosebelisi ka botlalo pele u sebelisa sehlahisoa, 'me u se boloke bakeng sa tšebeliso ea nako e tlang.
• Ka kopo, u se ke ua pepesetsa sehlahisoa pula kapa mongobo, 'me u qobe ho tšolloa ha metsi kapa maro a mang ho sona.
• Ka kopo o seke oa sebelisa kapa oa boloka sehlahisoa haufi le mehloli efe kapa efe ea mocheso joalo ka li-radiator, litofo kapa lisebelisoa tse ling tse futhumatsang mocheso.
• Sehlahisoa sena ke sa boleng bo holimo, ka kopo se thibele ho oela kapa ho thulana. 1

Lenane la ho paka

Karolo e ka Sehloohong

Lisebelisoa

Dikarolo Selelekela

Top Panel

1. LCD skrine
   Ho bontsha boemo ba sesebediswa ka intuitively. Ka kopo sheba "Screen Display" e latelang bakeng sa tlhaiso-leseling e batsi.
2. HLAPA K'OTHANA
   Ho lokisa boemo ba molumo oa li-audios tse hlahisoang; matšoao a molumo a tla fetoha ho latela boemo ba molumo.
3. Pontšo ea Molumo
   E bonts'a boemo ba molumo oa li-audio tse hlahisoang.
4. Konopo ea ho fetola mokhoa oa ho rekota / oa ho phallela
   Tobetsa nakoana ho chencha lipakeng tsa Mokhoa oa ho Rekota le Mokhoa oa ho phallela.
   AD5 e hlahisa molumo oa stereo ka mokhoa oa ho rekota, IN1 e emela mocha o letšehali, le IN2 mocha o nepahetseng; AD5 e hlahisa molumo oa mono ka mokhoa oa ho phallela.
5. Konopo ea ho Homola
   Tobetsa ho bulela/ho tima.
6. Konopo ea Denoise Touch
   Tobetsa ho bulela/tima Denoise.
7. Konopo ea ho ama ea REB/EQ
   Tobetsa nako e telele ho fetohela ho EQ kapa Reverb; tobetsa hakhutšoanyane ho khetha mekhoa ea EQ/REB.

Phanele e ka pele

1. Kena Boema-kepe IN1/2
   Lisebelisoa tsa 6.35 TRS le li-microphone tsa XLR li ka hokeloa ho AD5 ka likou tsa ho kenya IN1/2. Mokhoeng oa ho Rekota, IN1 e emetse kanale e leqeleng le IN2 kanale e nepahetseng.
2. Fumana Taolo Knob 1/2
   Fetola peleamp fumana bakeng sa matšoao a ho kenya ho IN1/2 ka ho latellana.
3. 48V Phantom Power Switch 1/2
   Bulela/ tima 48V Phantom Power.
   Ha o bulela switch ena, matla a phantom a tla fuoa jack ea XLR e hokahaneng le likoung tsa IN1/2.
   Ka kopo, e bulele ha u sebelisa maekerofounu e tsamaisoang ke phantom.
   1. Ha o hokela/o hakolla li-microphone ho AD5, ka kopo beha phaello ea AD5 bonyane pele o bula/ tima matla a Phantom a 48V ho qoba ho senya lisebelisoa.
   2. Ha o hokela lisebelisoa tse sa hlokeng matla a phantom a 48V ho boema-kepe ba IN1/2, ka kopo etsa bonnete ba hore o tima matla a phantom a 48V.
4. Inst Switch 1/2
   Bulela/tima tšitiso ea ho kenya. Ka kopo, bulela inst switch ha o hokela lisebelisoa tsa Hi-Z joalo ka katara ea motlakase/bass ho fumana litlamorao tse ntle.
   1. Ho khothaletsoa ho beha phaello ea AD5 bonyane pele o bulela/ tima Inst switch ho qoba mathata a maikutlo le tšenyo ea lisebelisoa.
   2. Ha o hokela lisebelisoa tse sa hlokeng hore ho be le tšitiso e phahameng ho boema-kepe ba IN1/2, ka kopo etsa bonnete ba hore o tima Inst switch.
   3. Ho tshireletsa sistimi ya dipikara tsa hao, siya sebuela-pele se timme ha o bulela/ tima.
5. 3.5mm Boema-kepe ba Tlhokomelo 1
   Hokela li-headphone tsa 3.5mm TRS/TRRS ho beha leihlo.
6. Monitoring Mode Switch
   Bulela/tima Mokhoa oa ho beha leihlo ka kotloloho. Ka mokhoa oa ho beha leihlo ka kotloloho, AD5 e tla tsamaisa mats'oao a molumo ho tloha ho IN1/2 ka kotloloho ho liphetho le li-headphone tse nang le zero latency. Ka mokhoa oa ho beha leihlo, mats'oao a molumo a tsoang ho IN1/2 a tla fetisetsoa ho software ea DAW ebe ho latela liphetho le li-headphone tse nang le molumo o kopaneng, tse tla baka tieho ea ho beha leihlo.
7. Loopback switjha
   Loopback e sebelisa lintho tse kenyang 'virtual', tse se nang likhokahanyo tsa 'mele ho sehokelo sa molumo ka botsona empa e khona ho khutlisetsa melaetsa ea matshwao a dijithale ho software ea DAW, e khona ho nka mats'oao ohle a molumo komporong ea hau (mohlala, molumo o tsoang ho web browser) ho kenya sebopeho sa audio.
   Tobetsa nakoana ho bulela/ea Loopback. Ha Loopback e buletsoe, AD5 e tla ntša mats'oao a molumo ho tsoa ho IN1/2 le likoung tsa USB-C; Ha Loopback e timme, AD5 e tla ntša mats'oao a molumo ho tsoa likoung tsa IN1/2.
   Loopback e ama feela molumo oa boema-kepe ba USB-C, eseng boema-kepe ba 3.5mm.
8. Monitoring Volume Control Knob
   Fetola boemo ba molumo oa boema-kepe ba ho beha leihlo1/2.

Panel ea ka morao

1. Konopo ea ho Fetola Matla / Puo
   Tobetsa nako e telele ho bulela/ tima; tobetsa ho fetola puo ea AD5 lipakeng tsa Sechaena le Senyesemane.
2. Boema-kepe ba ho tjhaja ba USB-C
   Basebelisi ba ka lefisa AD5 ka thapo ea 2 ho 1.
3. Boema-kepe ba USB 1/2
   Ho hokela mehala/khomphutha ho kenya/ho ntša matshwao a mamelwang ka thapo ya modumo ya 2 ho e 1. Lithelefono / lik'homphieutha li ka tsamaisa melaetsa ea molumo ho AD5 le AD5 e ka finyella tlhahiso ea digital ea matshwao a molumo ho tsoa ho lifono / lik'homphieutha ka bobeli le IN1/2.
4. 3.5mm Port 1/2
   Ho hokela mehala ho kenya / ntša matshwao a medumo ka 3.5mm
   thapo ea molumo ea TRRS-TRRS. Mehala e ka tsamaisa mats'oao a molumo ho AD5 le AD5 e ka fihlela tlhahiso ea analog ea mats'oao a molumo ho tsoa mehala le IN1/2.
5. 3.5mm Boema-kepe ba Tlhokomelo 2
   Hokela li-headphone tsa 3.5mm TRS/TRRS ho beha leihlo.
6. Line Output Port
   Hokela ho libui tsa ho beha leihlo, L e bolela mocha o letšehali le R mocha o nepahetseng.
7. Seta Hole hape
   Haeba sesebelisoa se sa khone ho tjhaja kapa se sa khone ho sebetsa, kenya phini ea ho seta botjha lesobeng la ho seta botjha ho e seta botjha.

Pontšo ea skrine

Ho kenya le ho Sebelisa

Khokahano ea lisebelisoa
Basebelisi ba ka hokela lisebelisoa tse tsamaellanang le sehokelo sa molumo ba buang ka litšoantšo tse latelang:

1. Hokela maekrofono/ lisebelisoa
   Hokela 6.35mm TRS maekerofounu/XLR ho AD5 ka likou tsa ho kenya IN1/2. Ka mokhoa oa ho rekota, IN1 e emetse kanale e letšehali, IN2 kanale e nepahetseng; ha o sebelisa microphone e tsamaisoang ke matla a phantom a 48V, ka kopo bulela matla a phantom a 48V; ha o hokela ho sesebelisoa sa Hi-Z joalo ka katara ea motlakase/bass, hoa hlokahala ho nolofalletsa sesebelisoa sa Inst ho fumana litlamorao tse betere tsa ho kenya; lokisa peleamp fumana bakeng sa matshwao a ho kenya a IN1/2 ka knob ya taolo ya ho fumana.
   1. Ha o hokela / o hakolla li-microphone ho AD5, ka kopo beha phaello ea AD5 bonyane pele o fetola
      on/off 48V Phantom power/ha e fapohele ho qoba ho senya lisebelisoa.
   2. Ha o hokela lisebelisoa tse sa hlokeng 48V phantom power/high impedance to IN1/2 port, ka kopo etsa bonnete ba hore o tima 48V phantom power/ha o switjha.
2. Hokela mehala ea cellular/khomphutha
   Basebelisi ba ka hokela mehala ea cellular / likhomphutha ho AD5 ka likou tsa USB-C/3.5mm bakeng sa ho kenya / ho tsoa ka matshwao a medumo. Matshwao a medumo a kang mmino o tswang ho dikhomphutha/mehala o ka tsamaiswa ho AD5, mme AD5 e hlahisa matshwao a medumo fonong/khomphuthang.
3. Kopanya li-headphones tsa tlhokomelo
   Basebelisi ba ka hokela li-headphone le 3.5mm monitoring port1/2 ea AD5, ba lokisa boemo ba molumo oa ho beha leihlo ka konopo ea taolo ea molumo, hammoho le ho beha leihlo matla a molumo ka skrineng sa LCD.
4. Hokela sebuela-pele sa ho beha leihlo
   Libui tsa ho beha leihlo li ka hokela ho AD5 ka likou tse peli tsa 6.35mm Line Output.

DAW Setting ea Software
Basebelisi ba ka qala ho sebelisa AD5 ka software ea DAW. (ka kopo sheba litaelo tse latelang ho Cubase le Pro Tools).

Cubase

1. Ka kopo, khoasolla le ho kenya mokhanni ASIO4ALL esale pele;
2. Hokela AD5 khomphuteng, bula Cubase, 'me u thehe morero o mocha;
3. Tobetsa 'Lisebelisoa - Setupo sa Sesebelisoa';
4. Khetha 'VST Audio System - ASIO4ALL v2';
5. Tobetsa 'ASIO4ALL v2 - Panel ea Taolo' ho kenya ts'ebetso ea 'Comica_AD5-USB2' koung ea ho kenya / ho tsoa (tobetsa ho bebofatsa matla le litšoantšo tsa ho bapala);
6. Kenya pina e ncha ea molumo ho Cubase, tobetsa letšoao la 'Record' ho qala ho rekota, 'me u tobetse letšoao la 'Monitor' ho fumana tlhahlobo ea ho kenya.

Lisebelisoa tsa Pro

1. Ka kopo, khoasolla le ho kenya mokhanni ASIO4ALL esale pele;
2. Hokela AD5 khomphuteng, bula Pro Tools, 'me u thehe morero o mocha;
3. Tobetsa 'Setup- Playback Engine', ebe u khetha 'ASIO4ALL v2';
4. Tobetsa 'Setup - Hardware - ASIO4ALL v2 -Launch Setup App' ho kenya tšebetsong 'Comica_AD5-USB2' koung ea ho kenya / ho tsoa (tobetsa ho bebofatsa matla le litšoantšo tsa ho bapala);
5. Kenya pina e ncha ea molumo u sebelisa konopo ea "Ctrl+ Shift+ N";
6. Tobetsa aekhone ea 'Record' ho qala ho rekota, 'me u tobetse letšoao la' Monitor 'ho fumana tlhahlobo ea ho kenya.

Haeba 'Comica_AD5-USB2' e sa fumanehe ho software, ka kopo etsa bonnete ba hore AD5 e hoketsoe komporong 'me u bule li-setting tsa molumo komporong ho bona hore na AD5 e setiloe joalo ka sesebelisoa sa kamehla sa komporo.

Ha mokhoa oa ho beha leihlo ka kotloloho o buletsoe, ka kopo tima "Monitor" ea software ea DAW, ho seng joalo u tla utloa lets'oao la audio leo u le lekotseng 'me molumo o tla hlahisa lets'oao le tsoang ho software ea DAW; ha mokhoa oa ho beha leihlo o buletsoe, ka kopo bula "Monitor" ea software ea DAW, moo basebelisi ba ka utloang molumo o hlophisitsoeng ke software ea DAW.

Litlhaloso

Sesebelisoa sa ho Kenyelletsa	2 x XLR/6.35mm
Digital Interface	2 x USB-C
Sebopeho sa Analog	2 x 3.5 limilimithara
Sebopeho sa Line Output	2 x 6.35 limilimithara
Monitoring Interface	2 x 3.5 limilimithara
Peleamp Fumana	+65dB
Dynamic Range	+115dB
SampLing Rate	48kHz
Botebo bo Botle	24 bit
Betri	Polymer Lithium Battery 3000mAh 3.7V
Nako ea Ts'ebetso	Lihora tse 6
Boema-kepe ba ho tjhaja	USB-C 5V2A
Boima bo kahare	470g
Boemo	170 x 85 x 61mm
Mocheso oa Mosebetsi	0℃ ~ 50℃
Mocheso oa polokelo	-20 ℃ ~ 60 ℃

• Websebaka: comica-audio.com
• Facebook: Comica Audio Tech Global
• InstagRam: Metlae ea Audio
• You Tube: Comica Audio

COM I CA LOGO ke letshwao la kgwebo le ngodisitsweng mme ke la Commlite Technology Co.,Ltd E.
lengolo-tsoibila: support@comica-audio.com

Litokomane / Lisebelisoa

COMICA LinkFlix AD5 Sebui sa Audio se nang le likarolo tse ngata [pdf] Bukana ea Mosebelisi LinkFlix AD5, Sehokelo sa Molumo se nang le likarolo tse ngata, Sehokelo sa Molumo, Sehokahanyi se tletseng likarolo, Sehokelo.

Litšupiso

• Bukana ea Mosebelisi