Cloud CX462 Audio System Controller
Tlhahisoleseding ya Sehlahiswa
The CX462 Audio System Controller ke sehlahisoa se entsoeng ke Cloud Electronics Limited. E etselitsoe ho fana ka "Molumo o Betere o Hlakileng" mme ke Mofuta oa 3 oa mofuta oa CX462. Tataiso ena ea ho kenya le ho seta e fana ka lintlha tse qaqileng mabapi le lintlha tsa polokeho ea sehlahisoa, tlhaloso e akaretsang, setšoantšo sa moralo, ts'ebetso ea ho kenya, lisebelisoa tsa stereo/'mino, lisebelisoa tsa maekerofounu, lintlha tse hlahisoang, li-module tse sebetsang, sehokelo sa alamo e sa bueng ea 'mino, lintlha tsa tekheniki, lintlha tse akaretsang. , le ho rarolla mathata.
Litaelo tsa Tšebeliso ea Sehlahisoa
- Tlhokomeliso ea Tšireletsehos: Pele o sebelisa CX462 Audio System Controller, bala ka hloko 'me u latele litaelo tsa polokeho tse fanoeng bukeng ea mosebelisi ho netefatsa ts'ebetso e bolokehileng ea sehlahisoa.
- Tlhaloso e Akaretsang: Itloaetse tlhaloso e akaretsang ea sehlahisoa ho utloisisa likarolo le tšebetso ea sona.
- Setšoantšo sa Schematic: Sheba setšoantšo sa schematic se fanoeng bukeng ea mosebelisi ho utloisisa likarolo tsa kahare le likhokahano tsa Selaoli sa Sistimi ea Audio ea CX462.
- Ho kenya: Latela litaelo tsa ho instola tse fanoeng bukeng ea mosebelisi ho kenya ka nepo Selaoli sa Sistimi ea Audio ea CX462.
- Lisebelisoa tsa Stereo/Mmino
- Sensitivity le Fumana Taolo: Fetola kutloisiso 'me u fumane litlhophiso tsa taolo bakeng sa ho kenya stereo/'mino ho latela litlhoko tsa hau.
- Taolo ea 'Mino - Sebaka sa Lehae kapa se hole: Khetha pakeng tsa taolo ea lehae kapa e hole bakeng sa ho bapala 'mino.
- Ho lekana ha Mmino: Hlophisa li-setting tsa ho lekana bakeng sa ho bapala 'mino.
- Pele Mola oa 6: Beha boemo ba bohlokoa bakeng sa tlhahiso ea Mola oa 6.
- Likenyo tsa Microphone
- Maekerofounu Fumana Mabitso: Utloisisa mabitso a phihlello ea maekrofono bakeng sa khokahano e nepahetseng.
- Litaolo tsa ho Fumana Maikrofono: Fetola taolo ea phaello bakeng sa ho kenya maekerofounu ha ho hlokahala.
- Litaolo tsa Boemo ba Maekerofounu: Beha li-control tsa boemo ba ho kenya microphone
- Ho lekana ha Microphone: Hlophisa li-setting tsa ho lekanngoa bakeng sa ho kenya microphone.
- Sefe ea Phase e Phahameng: Kenya filthara ea ho feta ho li-microphone haeba ho hlokahala.
- Microphone 1 Ea pele: Etsa qeto ea boemo ba bohlokoa ba ho kenya Microphone 1.
- Maekerofounu holim'a Ntho ea Pele ea 'Mino: Beha boemo ba mantlha ba maekrofono mabapi le ho bapaloa ha 'mino.
- Lintlha tse hlahisoang: Utloisisa lintlha tsa tlhahiso ea CX462 Audio System Controller ho netefatsa khokahano le ts'ebeliso e nepahetseng.
- Active Modules – Tlhaloso Kakaretso
- Active Equalization Modules: Ithute ka li-module tsa ho lekana tse sebetsang tse fumanehang bakeng sa tšebeliso.
- Cloud CDI-S100 Serial Interface Module: Utloisisa litlhaloso le tšebeliso ea Cloud CDI-S100 Serial Interface Module.
- Semumu sa 'Mino o Hole - Sehokelo sa Alarm ea Mollo: Latela litaelo tse fanoeng ho hokahana le ts'ebetso ea semumu sa mmino o hole ka sistimi ea alamo ea mollo.
- Litlhaloso tsa Tekheniki: Sheba karolo ea lintlha tsa tekheniki ho utloisisa lintlha tse qaqileng tsa CX462 Audio System Controller.
- Litlhaloso Kakaretso: Itloaetse ka litlhaloso tse akaretsang tsa sehlahisoa ho utloisisa bokhoni ba sona ka kakaretso le mefokolo.
- Ho batle phoso
- Dilopo tsa Lefatshe/Lefatshe: Rarolla mathata a amanang le loops ea fatše / ea lefatše.
- Ho hokela Lipontšo tse leka-lekaneng ho Kenyelletso ea Mola o sa Lekanengs: Rarolla mathata ha o hokela matshwao a leka-lekaneng ho methalo e sa leka-lekanang.
- Cloud CDI-S100 Serial Interface ha e sebetse hantle: Rarolla mathata ka mojule oa Cloud CDI-S100 Serial Interface.
- Liphetoho tsa ho fihlella maekrofono ha li sebetse hantle: Rarolla mathata a amanang le ho se sebetse hantle ha li-switches tsa maekrofono.
Lintlha tsa Polokeho
Bakeng sa lintlha tse qaqileng, sheba karolo e ka morao ea bukana.
- U se ke ua pepesa yuniti ho metsi kapa mongobo.
- Se ke oa pepesa yuniti mollong o hlobotseng.
- Se ke oa thibela kapa ua thibela moea ofe kapa ofe oa moea.
- Se ke oa sebelisa yuniti maemong a mocheso a kaholimo ho 35°C.
- Se ke oa ama karolo efe kapa efe kapa terminal e nang le letšoao le phelang le kotsi ( ) ha motlakase o fuoa yuniti.
- Se ke oa etsa litokiso leha e le life tsa ka hare ntle le haeba u tšoaneleha ho etsa joalo le ho utloisisa ka botlalo likotsi tse amanang le lisebelisoa tse sebelisoang ke mains.
- Yuniti ha e na likarolo tse ka sebelisoang ke basebelisi. Fetisetsa litšebeletso leha e le life ho basebeletsi ba nang le tsebo.
- Haeba polaka e entsoeng e khaotsoe ka lebaka lefe kapa lefe, polaka e lahliloeng e ka ba kotsi 'me e lokela ho lahloa ka tsela e nang le boikarabelo.
Tlhaloso e Akaretsang
Cloud CX462 ke motsoako o feto-fetohang, microphone le line input mixer. Motsoako o na le karolo ea 'mino e nang le lisebelisoa tse tšeletseng tsa stereo. Mohloli o khethang ho laola litsela tse batloang ke line ho liphetho tsa 'mino oa stereo. E na le karolo ea maekrofono e nang le li-microphone tse 'nè tse kopantsoeng le ho romeloa sebakeng se arohaneng, mono mic output. E le ho eketsa li-mixers versatility ho na le litsamaiso tsa ho eketsa tlhahiso ea karolo e 'ngoe ho e' ngoe. Ho na le lisebelisoa tse fapaneng tsa boikhethelo tse eketsang maemo a bonolo a CX462:
- Optional serial interface card (CDI-S100) e lumellang taolo ea
- Boemo ba 'mino le mohloli
- Boemo ba microphone
- Maekerofounu ea motho ka mong oa khutsa
- Khetho ea lipoleiti tse hole tse lumellang taolo ea
- Boemo ba 'mino le mohloli. RSL-6
- Boemo ba microphone bo boholo RL-1
- Equalization Modules for Bose® Model 8, 25, 32 & 102 Speakers.
Hammoho le lisebelisoa tsena CX462 e na le: - Lintho tse tlang pele ho maekerofounu, alamo ea mollo le monyetla oa hore Line 6 e be eona e tlang pele ho feta matshwao a mang a mmino.
Litaolo tsa CX462 li fanoa ka pele kapa ka morao ho sehlahisoa. Litaolo tse lokelang ho hlophisoa feela ha sehlahisoa se kenngoa li fumaneha ka morao; Litaolo tse sebelisetsoang ho fetola boemo, mohloli oa 'mino, molumo kapa lintho tse tlang pele ho CX462 li fumaneha ka pele. Hang ha tamperproof facia e teng, ke boemo feela, khetho ea mohloli le taolo ea matla e tla ba teng.
Setšoantšo sa Schematic
Ho kenya
Cloud CX462 e na le yuniti e le 'ngoe ea rack ea lisebelisoa tsa 19 ”. Litaolo tse behiloeng esale pele li ka koaheloa ka sekoaelo se fanoeng. Likoti tsa moea tse holim'a motheo oa yuniti ha lia lokela ho patoa. CX462 e botebo ba 152.5mm empa botebo ba 200mm bo lokela ho lumelloa ho hlakola lihokelo.
Lisebelisoa tsa Stereo/Mmino
Karolo ea 'mino ea CX462 e na le lintlha tse tšeletseng tsa stereo. Lisebelisoa tsena tsa line li loketse mehloli e mengata ea 'mino e kang compact disc player, li-tape player le li-receiver joalo-joalo. Lisebelisoa tsohle ha li leka-lekane 'me li sebelisa lihokelo tsa RCA tsa mofuta oa phono. Kenyelletso ea ho kenya ke 48kΩ.
Sensitivity le Fumana Taolo
Lisebelisoa tsohle tse tšeletseng li na le li-control tse behiloeng esale pele tse fumanehang karolong e ka morao, haufi le li-sockets tsa tsona tse fapaneng. Boikutlo ba ho kenya letsoho bo ka fapana ho tloha ho -17.6dBu (100mV) ho ea ho + 5.7dBu (1.5V). Litaolo tse behiloeng esale pele tsa phaello li lokela ho hlophisoa e le hore matšoao ohle a ho kenya a sebetse boemong bo tšoanang ka har'a CX462 mme litsamaiso tsa boemo ba 'mino li be le sebaka se nepahetseng sa taolo.
Taolo ea 'mino - Sebaka kapa hole
Mohloli oa 'mino le mesebetsi ea taolo ea' mino e ka laoloa ho tloha phanele e ka pele kapa poleiti ea taolo e hole e fumanehang ho fihla ho 100m ho tloha ho CX462. Ho na le lipoleiti tse peli tsa taolo e hole tse fumanehang bakeng sa CX462, RSL-6 le RL-1. RSL-6 e lokela ho sebelisoa ha ho hlokahala taolo e hole ea mohloli oa 'mino le boemo ba' mino athe RL-1 e ka sebelisoa ha kopo e hloka taolo e hole ea boemo feela (khetho ea mohloli ka phanele e ka pele). Lipoleiti tsa taolo e hole tsa RSL-6 le RL-1 li ka beoa holim'a mochini o tloaelehileng oa Borithane kapa lebokose le ka morao la 25mm le tebileng. Lithapo tse peli tsa mantlha tse nang le skrini ka kakaretso li lokela ho sebelisoa ho hokahanya li-control tse hole le Cloud CX462 'me litšoantšo tse ka tlase li bonts'a mokhoa oa ho hokahanya lipoleiti tse peli tse hole. Li-labels tse itšebetsang (tse fanoeng) li ka kenngoa karolong e ka pele le / kapa RSL-6 ho tseba mehloli e fumanehang ea ho kenya.
Bakeng sa ts'ebetso ea "remote" ea boemo ba 'mino (RL-1) kapa boemo le khetho ea mohloli (RSL-6), switjha ea phanele e ka pele e tlameha ho hlophisoa sebakeng sa 'REMOTE'. Swichi e ka morao e tšoailoeng 'REMOTE TYPE' e lokela ho hlongoa ho 'ANALOGUE'. Li-Jumpers J7-J10 li etsa qeto ea hore na taolo ea taolo ea 'mino e khethoa ke sesebelisoa se ka morao. Tafole e nang le litlhophiso tse ka khonehang le litlamorao tsa tsona e hlalositsoe ka botlalo ka tlase.
| PELE/ PHETOA | AN/SW | PHETOA PELE | Morao PHETHA | LEBAKA | MOHLOLI KHETHA | ||
| J9 | J10 | J7 | J8 | ||||
| N/A | N/A | N/A | N/A | 'LEHAE' | N/A | PELE | PELE |
| 'FR' | 'FR' | N/A | N/A | N/A | N/A | PELE | PELE |
| 'SW' | 'SW' | 'SW' | 'SW' | 'REMOTE' | 'ANALOGUE' | RSL-6 | RSL-6 |
| 'SW' | 'SW' | 'SW' | 'SW' | 'REMOTE' | 'DIGITAL' | CDI-S100 | CDI-S100 |
| 'SW' | 'FR' | 'SW' | N/A | 'REMOTE' | 'ANALOGUE' | PELE | RSL-6 |
| 'SW' | 'FR' | 'SW' | N/A | 'REMOTE' | 'DIGITAL' | PELE | CDI-S100 |
| 'FR' | 'SW' | N/A | 'SW' | 'REMOTE' | 'ANALOGUE' | RSL-6/RL-1 | PELE |
| 'FR' | 'SW' | N/A | 'SW' | 'REMOTE' | 'DIGITAL' | CDI-S100 | PELE |
| 'SW' | 'SW' | N/A | N/A | 'REMOTE' | 'ANALOGUE' | RSL-6 | RSL-6 |
| 'SW' | 'SW' | 'AN' | 'AN' | 'REMOTE' | N/A | RSL-6 | RSL-6 |
| 'SW' | 'SW' | 'AN' | 'SW' | 'REMOTE' | 'DIGITAL' | CDI-S100 | RSL-6 |
| 'SW' | 'SW' | 'SW' | 'AN' | 'REMOTE' | 'DIGITAL' | RSL-6/RL-1 | CDI-S100 |
Taolo ea 'Mino e ile ea tsoela pele
Taolo e hole e nolofalletsang li-jumpers
- J9: Mohloli oa 'mino
- J10: Boemo ba 'mino
Sebaka sa Jumpers J9 & J10
RSL-6A le RL-1A lia fumaneha 'marakeng oa Amerika. Li na le ts'ebetso e ts'oanang le ea RSL-6 le RL-1 empa li etselitsoe ho lekana lebokose le le leng la motlakase la Amerika. Litekanyo tse ka pele ke 4½" x 2¾".
Ha u seta jumper(s) ka kopo etsa bonnete ba hore u
- Tlosa thapo e kholo ka morao ea sehlahisoa pele u tlosa karolo e ka holimo.
- Kopanya yuniti feela u sebelisa likurufu tse ts'oanang le likarolo tsa mantlha.
Ho lekana ha Mmino
Litaolo tse behiloeng esale pele bakeng sa "treble" le "bass equalization" tsa matšoao a 'mino li fanoa molemong oa ho lumella sets'oants'o ho fetola karabelo ea mats'oao a 'mino ho lumellana le li-acoustics le karabelo ea sebui. Litaolo tsa ho lekana li ka patoa ka mor'a poleiti e ka tlosoang e sirelelitsoeng phanele e ka pele ka li-screw tsa hex; ho fumana phihlello ea taolo ea ho lekana sebelisa konopo ea hex e fanoeng. Litaolo tsa tekano li fumaneha ka letsohong le letšehali la mohloli oa 'mino le taolo ea boemo; li ngotsoe ka ho hlaka 'HF' (High Frequency) le 'LF' (Low Frequency). Karabelo ea maqhubu a bataletseng e ka finyelloa ka ho beha li-slots holim'a li-shafts tsa taolo sefofaneng se emeng; taolo ea HF e na le mefuta e mengata ea ± 10dB ho 10kHz le taolo ea LF e na le mefuta e mengata ea ± 10dB ho 50Hz.
Mola oa 6 Pele
Kenyelletso ea 'mino oa line 6 e ka etelletsoa pele ho feta matshwao a mang a mmino. Sena se reretsoe ho sebelisoa le mehloli e kang li-jukebox kapa libapali tsa phatlalatso. Ntho ena ea bohlokoa e hlahisoa ha letšoao le fumanoa molaong oa 6, ka nako eo mohloli oa 'mino o khethiloeng o tla khutsa' me mohala oa 6 o fetisetsoe ho sehlahisoa. Hang ha lets'oao la mohala oa 6 le emisa, mohloli oa 'mino o khethiloeng o tla khutlisa hantle boemong ba ona ba pele. Nako e nkiloeng bakeng sa tsosoloso ena e ka ba metsotsoana e 3, 6 kapa 12 ho itšetlehile ka hore na jumper ea ka hare ea J12 e behiloe joang; nako ea ho khutlisa ea kamehla ea feme ke metsotsoana e 3. E le ho bulela kapa ho tima, jumper e ka hare ea J11 e ka behoa, li-jumpers a le b li tla hloka ho behoa sebakeng se le seng.
Ha u seta jumper(s) ka kopo etsa bonnete ba hore u
- Tlosa thapo e kholo ka morao ea sehlahisoa pele u tlosa karolo e ka holimo.
- Kopanya yuniti feela u sebelisa likurufu tse ts'oanang le likarolo tsa mantlha.
Li-Jumpers tsa Mola oa 6 oa Pele
- J11: Taba ea pele e buletsoe/e tima
- J12: Nako ea ho lokolloa
- 3s
- 6s
- 12s
Sebaka sa Jumpers J11 & J12
Likenyo tsa Microphone
Ho fanoa ka li-microphone tse 'ne e 'ngoe le e 'ngoe e na le potoloho e leka-lekaneng ea elektroniki, e sa fetoleng transformer bakeng sa ts'ebetso e phahameng ea lerata le tlase. Tšitiso ea ho kenya e kholo ho feta 2kΩ 'me e loketse li-microphone tsa 200Ω ho isa ho 600Ω. Lintho tse kenyang li entsoe ka plug ea 3-pin in screw type connectors (mofuta oa Phoenix) e karolong e ka morao. Setsi sa ho fana ka matla a phantom a 15V se kenyellelitsoe bakeng sa maekrofono o mong le o mong o kentsoeng tšebetsong ka ho beha li-jumpers tse amehang tsa kahare ho tsoa lenaneng le ka tlase ho ea sebakeng sa 'ON'.
- J18:Mic 1 phantom matla
- J19: Mic 2 phantom matla
- J5: Mic 3 phantom matla
- J6: Mic 4 matla a phantom
Sebaka sa Jumpers J5 & J6
HLOKOMELA: Li-microphone e le 'ngoe le tse peli li na le li-jumpers tsa tsona tse lutseng holim'a boto ea potoloho ea microphone e ka holimo.
Ha u seta jumper(s) ka kopo etsa bonnete ba hore u
- Tlosa thapo e kholo ka morao ea sehlahisoa pele u tlosa karolo e ka holimo.
- Kopanya yuniti feela u sebelisa likurufu tse ts'oanang le likarolo tsa mantlha.
Likenyo tsohle tsa maekrofono li leka-lekanngoa le tlhophiso ea phini e latelang
- Pin 1 – LEFATŠE
- Pin 2 - COLD/INVERTING
- Pin 3 – HOT/NON-INVERTING
Ho hokahanya microphone e sa leka-lekaneng ho kenya letsoho, sebelisa pin 1 le 3 le pin 2 e hokahaneng fatše (Pin 1).
Maekerofounu Fumana Mabitso
Mabitso a phihlello bakeng sa tlhahiso e 'ngoe le e 'ngoe ea maekrofono a fanoe karolong e ka morao. Kenyelletso ea maekerofounu ka bomong e ka kengoa tšebetsong ka ho hokela mabitso a bona ho lebitso la 0V, ho siea sebaka se bulehileng sa "terminal" ho tla khutsisa tlhahiso ea maekrofono. Sena se fana ka sebaka sa ho khutsisa li-microphone ho sebelisa li-switches tse hole. Ha mabitso ana a phihlello a sa hlokehe a ka fetisoa ka tlhophiso ea li-jumpers tse ka hare tse hlalositsoeng ka tlase.
Fumana li-bypass jumpers
- J1-4: Limaekerofounu
- 1-4 ka ho latellana
Sebaka sa Jumpers J1-4
HLOKOMELA: Re eletsa hore ha u tlosa jumper u e tlohele e hokahane le pinana e le 'ngoe ea hlooho e le hore e lule e e-na le lisebelisoa bakeng sa tšebeliso ea nako e tlang.
Tlhophiso ea kamehla ea feme ea li-jumpers tsena ke ho feta li-terminals tsa phihlello, ho siea li-microphone tsohle li sebetsa. Hape hoa khonahala ho khutsisa likenyelletso tsa maekrofono ho sebelisa mojule oa sebopeho sa CDI-S100. E le hore CDI-S100 e khone ho khutsisa mocha oa microphone ka katleho, jumper e tsamaisanang e tlameha ho ba teng.
Ha u seta jumper(s) ka kopo etsa bonnete ba hore u
- Tlosa thapo e kholo ka morao ea sehlahisoa pele u tlosa karolo e ka holimo.
- Kopanya yuniti feela u sebelisa likurufu tse ts'oanang le likarolo tsa mantlha.
Litaolo tsa ho Fumana Maikrofono
Litaolo tse seng li setiloe esale pele li fanoa haufi le ho kenya microphone. Phaello e ka fetoloa ho tloha ho 0dB ho ea ho 60dB. Ka tloaelo, tlhophiso ea ~ 30dB e lekane bakeng sa li-microphone tse matla. Phapang e phahameng ea overload e bolokiloe maemong ohle a phaello. Sena se lokela ho lumella sebaka sa mats'oao ho tloha ho 0.775mV (-60dBu) ho isa ho 775mV (0dBu).
Litaolo tsa Boemo ba Maekerofounu
Microphone e 'ngoe le e' ngoe e na le li-control tse behiloeng ka pele bakeng sa boemo ba tsona. Ho potoloha taolo ea maekerofounu efe kapa efe e khahlanong le oache ka botlalo ho tima maekrofono. Ntle le moo, li-microphone li ka khutsisoa ka mabitso a phihlello a phanele e ka morao (sheba karolo ea 6.1)
Boemo ba microphone bo ka laoloa sebakeng sa heno ka taolo ea rotary ea phanele e ka pele, kapa ka poleiti ea lebota e hole ho fihla ho 100m hole le yuniti. Ho hlophisa CX462 bakeng sa ts'ebetso ea boemo bo hole, switch ea phanele e ka pele e tlameha ho ba sebakeng sa 'REMOTE'.
Swichi e ka morao e tšoailoeng 'REMOTE TYPE' e lokela ho ba boemong ba 'ANALOGUE'. Boemo ba microphone bo ka boela ba laoloa ka Cloud CDI-S100 Serial Interface Module (sheba karolo ea 8.2).
Ho lekana ha Microphone
Ho lekana ha lihlopha tse peli ho fanoa bakeng sa ho kenya microphone ka bomong. Litaolo tse seng li setiloe ho lokisa tekano li fumaneha kaholimo ho le letona la taolo e 'ngoe le e 'ngoe ea phanele ea maekerofounu. Litšobotsi tsa ho lekanngoa li ntlafalitsoe bakeng sa tonal tonal ea matšoao a puo. Taolo ea HF e fana ka ± 10dB ho 5kHz ha taolo ea LF e fana ka ± 10dB ho 150Hz.
Tekanyetso ea parametric e sebelisoa ho matšoao ohle a maekrofono, ho lumella sets'oants'o ho lokisa maekrofono kapa molumo oa kamore. Litaolo tse seng li setiloe ho lokisa tekano li fumaneha kaholimo ho le letona la taolo ea boemo ba maekrofono (phanele e ka pele). Tekatekano ena e ntlafalitsoe bakeng sa mantsoe mme e fana ka phaello ea ± 10dB ho feta maqhubu a 300Hz - 3kHz.
Litaolo tsohle tsa ho lekana ha microphone li patiloe ka morao ho phanele e ka tlosoang. Ho feta hantle karolo ea ho lekana, taolo ea phaello e lokela ho hlophisoa ho 0dB (bohareng ba boemo / e otlolohileng).
Sefe ea Phase e Phahameng
Liteishene tsohle tsa maekrofono li feta ka har'a filthara e phahameng e sebetsang ho 150Hz e nang le moepa oa 18dB ka octave; ka hona e fana ka phokotso e sebetsang ea ho phatloha ha moea le lerata la ho sebetsana le LF. Setlhopha sena se ka kengoa kapa sa tsoa ka sesebelisoa sa phanele e ka pele e ka letsohong le letona la taolo ea boemo ba maekrofono. Sesebelisoa sena se tla patoa ha phanele e ka tlosoang e le teng.
Microphone 1 Ea pele
Microphone 1 e ka etelletsoa pele ho li-microphone 2-4. Tšobotsi ena e ka hlahisoa ka litsela tse peli, e khethiloeng ka boemo ba jumper ea ka hare J17
- 'AVO': Taba e tlang pele e fanoa ha lets'oao le fumanoa ho mic 1 input.
- 'ACC': Taba e tlang pele e fanoa ha phihlello ea mic 1 e khethoa ka likhokahano tsa phihlello tsa maekrofono karolong e ka morao.
Li-jumpers tsa mantlha tsa Microphone 1
- J16: Mic 1 holim'a lets'oao la mmino / phihlello e hlahisitsoe.
- J17: Mic1 holim'a li-mics lets'oao / phihlello e hlahisitsoe
Sebaka sa Jumpers J16 & J17
Hlokomela hore J17 e lokela ho hlophisoa feela hore e fihlele ntho e tlang pele e hlahisitsoeng haeba u ikemiselitse ho sebelisa khokahano ea phihlello ea ka morao ea MIC 1. Ntho ea bohlokoa e fetoloa ho kena kapa ho tsoa ka sesebelisoa se ka pele se tšoailoeng 'MIC 1 OVER MICS'. Litaolo tsohle tsa bohlokoa li patiloe ha phanele e ka tlosoang e hoketsoe.
Microphone ho feta Mmino o tlang pele
CX462 e fana ka sebaka seo ka sona matshwao a maekrofono a ka bewang pele ho matshwao a mmino. Ha lets'oao le fumanwa ho kenyeletso efe kapa efe ya maekropo, matshwao ohle a mmino a fokotswa ho isa boemong bo laotsweng ke taolo ya phanele e ka pele. Hang ha ho se na lets'oao la maekrofono le teng, 'mino o tla khutlisetsa litlhophisong tse fetileng.
Potoloho ea pele e ka hlophisoa ho bona boteng ba lets'oao la maekrope pele kapa kamora "Add Mic" taolo ea rotary ea phanele ka ho seta jumper ea kahare J15 ho PRE kapa POST. Haeba potoloho ea pele e behiloe pele ho taolo ena (PRE), joale mats'oao a 'mino a tla fokotseha ho sa tsotelehe hore na lets'oao le leng le le leng la maekrofono le fepeloa ka tlhahiso ea' mino oa stereo. Haeba potoloho ea pele e behiloe ka mor'a taolo ena (POST) joale matsoao a 'mino a tla fokotseha ha feela lets'oao le leng la maeke le kentsoe molumong oa' mino. Hlokomela hore ho sa tsotelehe boemo bona ba jumper, potoloho ea pele e tla theola boemo ba 'mino ho li-mic le liphetho tsa mmino.
Microphone 1 e ka hlophisoa hore e etelle pele ka mabitso a phihlello a phanele e ka morao, ho fapana le ho utloa molumo oa lentsoe. Ho lumella sena, jumper ea kahare J16 e tlameha ho hlophisoa ho
'FIHLEHO' (sheba setšoantšo se ka holimo bakeng sa sebaka sa J16). Hlokomela hore J16 e lokela ho hlophisoa feela sebakeng sa 'ACCESS' haeba u ikemiselitse ho sebelisa lebitso la ka morao la Mic 1 (sheba karolo ea 6.1).
Tekanyo eo matshwao a mmino a fokotswang ka yona e ka hlophiswa ka taolo ya phanele e ka pele, e tlohang ho -10dB ho isa -60dB. Ho beha switjha e ka pele e tšoailoeng 'MIC OVER MUSIC' sebakeng sa 'OFF' ho tla hlola potoloho ea mantlha ea Microphone. Litaolo tsohle tsa bohlokoa li patiloe ha phanele e ka tlosoang e hoketsoe.
Lintlha tse hlahisoang
Terminal e 'ngoe le e' ngoe e hlahisoang e leka-lekane, e sebelisa sehokelo sa mofuta oa 3 pole 'Phoenix' 'me e ka sebetsa ka mejaro e tlase ho 600Ω. Boemo ba tlhahiso ea lebitso ke 0dBu (775mV) empa motsoako o ka sebetsa ka mefuta e mengata ea lipontšo ho fihlela boemong bo phahameng ba tlhahiso ea +20dBu (7.75V). Bakeng sa likhokahano tse leka-lekaneng, ho lokela ho sebelisoa cable e nang le mahlakore a mabeli. Hokela skrine ho pin 1, lets'oao la mohato o ka morao
(ka tloaelo e putsoa kapa e ntšo) ho penya 2 le lets'oao la mokhahlelo (hangata le lefubelu) ho penya 3. Haeba u lakatsa ho hokela tlhahiso efe kapa efe ea libaka ho kenyeletso e sa leka-lekanang, hokela skrineng sa thapo ho penya 1 ka khokahanyo e chesang.
(Inner core) ho penya 3 'me u se ke ua hokahanya le pin 2.
Phallo ea 'mino ea CX462 e ka sebetsa ka mokhoa oa stereo kapa oa mono. Boemo ba kamehla ke hore CX462 e sebetse ka mokhoa oa stereo. Ka mokhoa oa mono, mehloli eohle ea matšoao a stereo e tsoakoa ka hare 'me e hlahisa lets'oao le ts'oanang ho liphetho tsa 'mino tse ka letsohong le letšehali le le letona. Mokhoa o ka fetoloa ka ho seta jumper ea kahare J14 ho 'MONO' kapa 'STEREO' kamoo ho hlokahalang.
J14: Tlhahiso ea 'mino oa MONO / STEREO
Sebaka sa Jumper J14
Active Modules – Tlhaloso Kakaretso
Li-module tse sebetsang tse fumanehang bakeng sa CX462 li kenyelletsa li-module tsa Aive Equalization le Cloud CDI-S100 Serial Interface Module. CX462 e ka fana ka boholo ba 80mA hona joale ho li-module tse sebetsang le lisebelisoa tsa ka ntle (tse kang microphone ea paging ea CPM). Tšebeliso ea hona joale ea li-module tse fapaneng e hlalositsoe ka botlalo tafoleng e ka tlase:
| Tlhaloso ea Mojule | Hona Joale E Hlokahala |
| CDI-S100 Serial Interface module | 35mA |
| BOSE® EQ likarete: M8, M32, MA12, 402, 502A, 802, MB4, MB24, 502B, 502BEX | 12mA |
| BOSE® EQ likareteLT3302, LT4402, LT9402, LT9702 | 17mA |
| BOSE® EQ karete ea M16 | 24mA |
Li-Module tsa Tekano tse sebetsang
Seteishene se seng le se seng se hlahisoang se na le sebaka sa ho hokahanya mojule oa plug-in equalization.
Lihokelo tsa mojule tsa ho lekana li tšoailoe ho PCB e kholo joalo ka
- CON3 bakeng sa tlhahiso e nepahetseng ea 'Mino
- CON4 bakeng sa tlhahiso ea 'Mino ea ho le letšehali
- CON5 bakeng sa tlhahiso ea Microphone.
Ha tlhahiso ea 'mino e behiloe mono, u sebelisa Jumper J14, ho hlokahala karete e le' ngoe feela ea EQ. Karete e ka kenngoa ho CON3 kapa CON4 ho latela sokete ea tlhahiso eo u khethang ho e sebelisa.
Ho kenya
- Tlosa phepelo ea mantlha 'me u tlose moetapele oa motlakase oa CX462.
- Tlosa karolo e ka holimo ea yuniti
- Kenya module ea EQ ho sehokelo. Boto ea karete ea EQ e lokela ho ba perpendicular ho boto e kholo.
- Kenya khatello e itekanetseng ho karete ea EQ ho fihlela e fumaneha ka ho penya.
- Fetola phanele e ka holimo.
HLOKOMELA: Ka mokhoa oa mono (sheba karolo ea 7), hoa khoneha ho sebelisa mochine oa mono equalization ho e 'ngoe feela ea litsela, ho fana ka mocha o le mong o nang le letšoao le lekanang le le le leng ntle le.
Sebaka sa Lihokelo tsa Equalization Module CON3 le CON4
Sebaka sa Equalization Module Connector CON5
Cloud CDI-S100 Serial Interface Module
CX462 e ka sebelisoa e le karolo ea sesebelisoa sa molumo o ikemetseng ka tšebeliso ea CDI-S100 Serial Interface Module. Module e ka laola:
- Mohloli oa 'mino, boemo le limumu
- Boemo ba microphone
- Maekerofounu ea motho ka mong oa khutsa
Litaolo tsa 'mino oa CDI-S100 li ka hlōloa ka ho beha li-jumpers tsa ka hare J7 (khetho ea mohloli) le J8 (bolumo). Ho beha switjha e ka pele e tšoailoeng 'LOCAL/REMOTE' sebakeng sa 'LOCAL' ho tla hlola taolo e hole ea CX462. LED e lumellanang e bontša boemo ba hona joale.
Ho kenya
- Hakolla phepelo ea mantlha ho tsoa ho CX462.
- Tlosa phanele e kaholimo ho CX462.
- Tlosa phanele e thibelang sebaka sa terminal sa serial interface ha ho se na module ea interface e kentsoeng.
- Fumana sehokelo CON7 (16 pin ribone)
- Tlosa M3 screw ka mor'a CON7 le M3 screw left of C96. Boloka ka lehlakoreng le leng.
- Sireletsa li-spacers tse 25mm ka har'a masoba a screw mohatong oa 5.
- Hokela thapo ea ribone e hokeletsoeng mojuleng ho terminal ea CON7. Pin 1 e lokela ho ba phini e ka pele ka ho le letona.
- Beha mojule holim'a li-spacers, ho etsa bonnete ba hore o hokahanya sokete ea sebopeho le lesoba le ts'oanang.
- Sebelisa li-screws tsa M3, tse bolokiloeng ho tloha mohato oa 3, ho tiisa boto ho li-spacers.
- Beha karolo e ka morao ea 'REMOTE TYPE' e fetohela ho 'DIGITAL'.
- Seta phanele e ka pele ea 'LOCAL/REMOTE' ho fetohela hole.
- Sheba le ho seta li-jumpers tsa ka hare tsa J7-10 ho hlophisa phello ea mojule ho matshwao a mmino.
- Netefatsa hore li-jumpers J1-4 li maemong a bypass (khokahanyo e entsoe).
Lintlha mabapi le mokhoa oa ho sebelisa CX462 ka sebopeho sa CDI-S100 li fanoe bukeng ea mojule. Bukana e tla fihla le mojule, empa hape e ka koptjoa ho
info@cloud.co.uk haeba e lahlehile. 
Sebaka sa CDI-S100 Serial Interface Module Connector CON7
Remote Music Mute - Sehokelo sa Alarm ea Mollo
Lits'ebetsong tse ling, joalo ka meaho e nang le laesense kapa mabenkele ka har'a setsi sa mabenkele, ho ka 'na ha e-ba le molao oa lehae kapa tlhokahalo ea litšebeletso tsa litima-mollo ho khutsisa mats'oao a 'mino ka phanele ea taolo ea mollo nakong ea alamo. CX462 e fana ka sebaka sa ho khutsisa mats'oao a 'mino feela, ka ho sebelisa mabitso a mabeli a arohaneng ka botlalo. Hangata sena ke relay e behiloeng haufi le CX462, e tsamaisoang ke phanele ea taolo ea alamo ea mollo. Relay e ka koaloa kapa ea buloa ka boemo ba alamo, empa jumper e ka hare ea J13 E LOKELA ho behoa sebakeng se lumellanang.
- N/C: Boemo ba alamo ha relay e buloa.
- N/O: Boemo ba alamo ha relay e koala.
Ha u seta jumper(s) ka kopo etsa bonnete ba hore u
- Tlosa thapo e kholo ka morao ea sehlahisoa pele u tlosa karolo e ka holimo.
- Kopanya yuniti feela u sebelisa likurufu tse ts'oanang le likarolo tsa mantlha.
Litlhahiso tsa Teknoloji Line Inputs
| Karabelo ea Khafetsa | 20Hz-20kHz | +0, -0.5dB |
| Phetolo | <0.03% | 80kHz Bandwidth |
| Kutloelo-bohloko | 100mV (-17.8dBu) ho ea ho 1.5V (+5.7dBu) | |
| Taolo ea ho Fumana | 24dB sebaka | |
| Kena Impedans | 48kΩ | |
| Ntlo-kholo | >20dB | |
| Lerata | -91dB rms | 22kHz Bandwidth (phaello e 0dB) |
| Ho lekana | HF±10dB/10kHz, LF± 10dB/50Hz | |
Likenyo tsa Microphone
|
Karabelo ea Khafetsa |
-3dB@ 30Hz (ntle le sefe) |
20kHz -0.5dB, +0dB |
| -3dB@ 150Hz (e nang le sefe) | ||
| Phetolo | <0.05% | 20kHz Bandwidth |
| Fumana Range | EA-0dB-60dB | |
| Kena Impedans | >2kΩ(e leka-lekaneng) | |
| Ho hana mokhoa o tloaelehileng | >70dB 1kHz E Tlwaelehileng | |
| Ntlo-kholo | >20dB | |
| Lerata | -128dB rms EIN | 22kHz Bandwidth |
| Ho lekana | HF± 10dB/5kHz LF± 10dB/150Hz | |
Litholoana
| Boemo ba tlhahiso ea lebitso | 0dBu |
| Boima bo fokolang | 600Ω |
| Boemo bo phahameng ba tlhahiso | +20dBu |
Litlhaloso Kakaretso
| Kenyeletso ya Matla | 230V/115V ±10% |
| Tekanyetso ea Fuse | T100mA 230V T200mA 115V |
| Mofuta oa Fuse | 20mm x 5mm 250V |
| Litekanyo | 482.60mm x 44.00mm(1U) x 152.5mm |
| Boima(kg) | 2.5 |
Ho batle phoso
Ho sa tsotellehe boikitlaetso ba hao bo matla, haeba sebuela-hōle se phethiloeng se 'luma' mohlomong u na le 'ground loop'; mohloli oa lets'oao le khopisang o ka fumanoa ka ho beha taolo ea molumo ho bonyane ebe o hakolla li-lead tsa ho kenya (likanale tse ka letsohong le letšehali le le letona) ho kenyelletso e 'ngoe le e' ngoe ho fihlela 'hum' e nyamela. Bothata bona hangata bo bakoa ke ho emisa thapo e kentsoeng e kentsoeng mohloling oa lets'oao o lutseng hole haholo ho tloha ho CX462.
Mokhoa o motle oa ho qoba bothata bona bo ka bang teng ke ho sebelisa mehloli ea matšoao (libapali tsa CD le tse ling tse joalo) tse kentsoeng habeli tse sa hokahaneng le lefats'e la phepelo ea motlakase. Haeba phepelo ea lets'oao e tsoa sesebelisoa sa bobeli (sehlahisoa sa tlelabo kapa microphone bakeng sa example) e ka ba ntho e tloaelehileng ho lebella hore sena se tla etsoa fatše; re khothaletsa hore ho sebelisoe transformer ho arola lets'oao le ho thibela lerata le lerata (sheba litšoantšo tse ka tlase)
Ho hokela matshwao a leka-lekaneng ho methati e sa leka-lekanang
Re khothaletsa tšebeliso ea transformer ho fetolela lets'oao le leka-lekaneng ho lets'oao le sa leka-lekaneng le loketseng ho hokela ka kotloloho ho li-input tsa mela ea CX462. Transformer e lokela ho behoa haufi le CX462 mme sephetho se sa leka-lekaneng se lokela ho bolokoa se le khuts'oane ka hohle kamoo ho ka khonehang. Moo mohloli le likarolo tsa sebaka li entsoeng, ho bohlokoa ho arola mapheo a mantlha le a bobeli ho qoba loop e ka bang teng; haeba ho na le lipelaelo ka sena, re fana ka maikutlo a hore skrine ea cable e leka-lekaneng ha e kopane qetellong ea transformer. Likarolo tsa RS karolo ea 210-6447 ke transformer e loketseng bakeng sa ts'ebeliso ena re khothaletsa hore skrineng (karolo ea nomoro ea 210-6469) le eona e kenngoe ho transformer; Canford Audio e fana ka transformer e tšoanang (nomoro ea karolo ea OEP Z1604). Li-transformer tsohle li lokela ho kenngoa ka mohala ho fana ka karo-karolelano ea 1: 1.
AUDIO TRANSFORMER RS KAROLO YA KAROLO: 210-6447 E FUMANE LE SKREENING CAN RS KAROLO YA KAROLO: 210-6469
Cloud CDI-S100 Serial interface ha e sebetse hantle
E le hore module ea serial interface e hokahane ka nepo le CX462, ho na le lintlha tse hlokang tlhophiso e khethehileng.
- Li-jumpers tsa ka hare tsa J7 & J10 li tlameha ho hlophisoa ho ea boemong ba 'SW'. Fektheri ea kamehla ke ea li-jumpers J7 le J8 ho ba boemong ba 'AN' e leng se qobellang boemo ba 'mino le mohloli ho laoloa ke li-remoutu tsa analogue.
- Li-jumpers tsa ka hare tsa J1-4 li tlameha ho hlophisoa hore li pote likhokahano tse ka morao tsa phihlello. Li-jumpers li lokela ho hokahanya lithapo tsa hlooho.
- Netefatsa hore switjha e ka pele e tšoailoeng 'LOCAL/REMOTE' e behiloe sebakeng sa 'REMOTE'.
- Swipe e ka morao e tšoailoeng 'REMOTE TYPE' e lokela ho ba boemong ba 'DIGITAL'.
Haeba mojule o ntse o sa sebetse ka nepo hang ha likarolo tsena tsa yuniti ea CX462 li se li hlophisitsoe, sheba bukana ea mojule bakeng sa lintlha tsa likhokahano tsa serial port le protocol ea likhokahano.
Li-switches tsa ho kena ka maekrofounu ha li sebetse hantle
CX462 e siea fektheri e hlophiselitsoe ho feta mabitso a phihlello ea maekrofono bakeng sa likenyelletso tsohle tse nne tsa maekrofono, e le hore ha sehlahisoa se fihla, lintho tsohle tse kenang li tla lumelloa. Li-jumpers tsa kahare J1 ho ea ho J4 li feta mabitso a phihlello bakeng sa maekrofono 1 ho isa ho 4 ka ho latellana. Ho nolofalletsa phihlello ho e 'ngoe ea likanale tsa maekrofono, khaola jumper e tsamaisanang.
HLOKOMELA: Re eletsa hore ha u tlosa jumper u e tlohele e hokahane le pinana e le 'ngoe ea hlooho e le hore e lule e e-na le lisebelisoa bakeng sa tšebeliso ea nako e tlang.
Lintlha tsa Tšireletso le Boitsebiso
Yuniti e tlameha ho hatelloa. Netefatsa hore phepelo ea motlakase ea mantlha e fana ka khokahanyo e sebetsang ea lefats'e ka ho felloa ke likhoele tse tharo.
Ha sesebelisoa sa motlakase se tima 'O', li-conductors tse phelang le tse sa nke lehlakore tsa transfoma e kholo lia khaoha.
TLHOKOMELO - Tlhophiso
- U se ke ua pepesa yuniti ho metsi kapa mongobo.
- Se ke oa pepesa yuniti mollong o hlobotseng.
- Se ke oa thibela kapa ua thibela moea ofe kapa ofe oa moea.
- Se ke oa sebelisa yuniti maemong a mocheso a kaholimo ho 35°C.
- Se ke oa beha lijana tse tlatsitsoeng ka metsi holim'a kapa ho potoloha yuniti.
TLHOKOMELISO – Hazardous Live
- Se ke oa ama karolo efe kapa efe kapa terminal e nang le letšoao le phelang le kotsi ( ) ha motlakase o fuoa yuniti.
- Li-terminals tseo letšoao le phelang le kotsi le buang ka tsona li hloka ho kenngoa ke motho ea tšoanelehang.
TLHOKOMELISO – Mains Fuse
- Tlosa fuse ea mantlha feela ka mofuta le litekanyetso tse tšoailoeng karolong e ka morao.
- Boholo ba 'mele oa fuse ke 20mm x 5mm.
TLHOKOMELO - Ho sebeletsa
- Yuniti ha e na likarolo tse ka sebelisoang ke basebelisi. Lebisa litšebeletso ho basebeletsi ba tšebeletso ba tšoanelehang. Se ke oa etsa litšebeletso ntle le haeba u tšoaneleha ho etsa joalo.
- Hakolla thapo ea motlakase ho yuniti pele u tlosa phanele e kaholimo 'me u se ke ua etsa litokiso tsa ka hare ha yuniti e buletsoe.
- Kopanya yuniti feela u sebelisa likurufu tse ts'oanang le likarolo tsa mantlha.
- Molemong oa lintlafatso tse tsoelang pele Cloud Electronics Limited e na le tokelo ea ho fetola lintlha ntle le tsebiso pele.
Cloud Electronics Limited 140 Staniforth Road Sheffield S9 3HF Engelane
- Mohala +44 (0) 114 244 7051
- Fekse +44 (0) 114 242 5462
- E-mail: Info@cloud.co.uk
Litokomane / Lisebelisoa
 |
Cloud CX462 Audio System Controller [pdf] Tlhophiso Tataiso CX462 Audio System Controller, CX462, Audio System Controller, Taolo ea Sisteme |