5.250030 Sireletsehile Network Analytics
CIMC Firmware Version 4.3(5.250030 M6 Update Patch for Secure Network Analytics v7.5.1
CIMC Firmware Version 4.3(5.250030 M6 Update Patch for Secure Network Analytics v7.5.1
This document provides a description of the CIMC 4.3(5.250030) Firmware M6 Common Update Patch for Secure Network Analytics along with instructions for installing the patch.
This firmware update can be performed using either the SWU file/mokhoa kapa ISO file/ mokhoa o hlalositsoeng ka tlase:
● The SWU file, patch-common-SNA-FIRMWARE-20250403-v2-01.swu, e ntlafatsa firmware ea CIMC ho version 4.3 (5.250030) bakeng sa lisebelisoa tsa UCS C-Series M6 tse sebelisang Secure Network Analytics v7.5.1.
● Alternatively, you can also use the ISO file, patch-common-SNA-FIRMWARE 20250403-M6-REL.iso, to update the CIMC firmware to version 4.3(5.250030) for UCS C-Series M6 hardware with Secure Network Analytics v7.5.1.
E le karolo ea ts'ebetso ea ntlafatso, etsa bonnete ba hore u kenya lipache tse hlokahalang tsa rollup lisebelisoa tsa hau.
M6 Hardware
Patch ena e sebetsa ho hardware ea UCS C-Series M6 bakeng sa lisebelisoa tsa Secure Network Analytics tse bontšitsoeng tafoleng e latelang.
M6 Hardware
Manager 2300 Flow Sensor 1300
Data Node 6300 Flow Sensor 3300
Flow Collector 4300 Flow Sensor 4300
Etsa bonnete ba hore u nchafatsa lisebelisoa tsohle tsa 'mele.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
Tlhahisoleseling e 'Ngoe
For more details about CIMC version 4.3(5.250030), refer to Release Notes for Cisco UCS Rack Server Software.
Khoasolla le ho Kenya
U ka khoasolla le ho kenya CIMC 4.3(5.250030) Firmware M6 Common Update Patch ka e 'ngoe ea litsela tse latelang:
- Ho jarolla le ho kenya ka SWU
- Downloading and installing via ISO
Ho jarolla le ho kenya ka SWU
Khoasolla
Ho jarolla patch e tloaelehileng ea ntlafatso file, tlatsa mehato e latelang:
1. Log in to Cisco Software Central, https://software.cisco.com.
2. In the Download and Upgrade area, choose Access downloads.
3. Mofuta Sireletsehile Network Analytics ho Kgetha Sehlahiswa lebokose la ho batla.
4. Choose the appliance model from the drop-down list, then press Kena.
5. Under Select a Software Type, choose Secure Network Analytics Patches, ebe u khetha Firmware > Firmware in the All Release area to locate the patch.
6. Download and save the file, patch-common-SNA-FIRMWARE-20250403-v2- 01.swu.
Ho kenya
Ho kenya ntlafatso e tloaelehileng ea patch file, tlatsa mehato e latelang:
1. Log in to the Manager.
2. On the Network Analytics page, choose Hlophisa > Lefatšeng ka bophara > Tsamaiso e Bohareng.
3. Tobetsa Motsamaisi oa ntlafatso.
4. On the Update Manager page, click Kenya, and then open the saved file, patch common-SNA-FIRMWARE-20250403-v2-01.swu.
5. Tobetsa ea Liketso menu for the appliance, then click Install Update. The patch stops the Vertica Database, then restarts the appliance.
6. Make sure you restart Vertica on any Data Node after the update patch file successfully installs on kaofela Data Nodes.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
a. Log in to the Manager.
b. Eya ho Tsamaiso e Bohareng > Lebenkele la Boitsebiso > Database Control.
c. Under the Database Control tab, click the 
d. Choose Qala.
e. Confirm the database status is shown as Connected. The installation process can take up to 90 minutes; the appliance restarts automatically.
Khoasolla le ho e kenya ka ISO
Khoasolla
Ho jarolla patch ea ntlafatso file, tlatsa mehato e latelang:
1. Log in to Cisco Software Central, https://software.cisco.com.
2. In the Download and Upgrade area, choose Access downloads.
3. Type Secure Network Analytics in the Kgetha Sehlahiswa lebokose la ho batla.
4. Choose the appliance model from the drop-down list, then press Kena.
5. From the left menu, choose All Release > 4.3 > 4.3(5.250030).
6. Download and save the file, patch-common-SNA-FIRMWARE-20250403-M6- REL.iso.
7. There are two ways of installing ISO:
o Ho kenya Ho sebelisa vKVM-Mapped vDVD
o Ho kenya ho Sebelisa CIMC-Mapped vDVD
Pele ho Tlhophiso
If you have firewall rules enabled for Cisco Integrated Management Controller (CIMC), specify 169.254.254.2 in the list of allowed hosts to ensure the update is successful. Otherwise you can skip this step and go to Ho kenya Ho sebelisa vKVM-Mapped vDVD or Ho kenya ho Sebelisa CIMC-Mapped vDVD, depending on your preferred installation method.
1. Log in to the unit’s Cisco Integrated Management Controller (CIMC) interface using a web sebatli.
2. Khetha Networking > Network Security.
3. Ka har'a IP Filtering (Allow Listing) menu, enter 169.254.254.2 IP value in the IP filter lebala.
4. Tobetsa Boloka Liphetoho.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
Ho kenya Ho sebelisa vKVM-Mapped vDVD
Mokhoa ona oa ho kenya o nchafatsa firmware ka ho fihlella ntlafatso ea firmware ea ISO file bolokoa mochining o sebelisoang ho hokela CIMC UI.
To install the firmware patch from an ISO image, use the vKVM console of an M6 machine.
1. Kena ho sebopeho sa yuniti sa Cisco Integrated Management Controller (CIMC) u sebelisa a web sebatli.
2. Khetha Launch KVM on the toolbar, if prompted, select HTML based KVM.
3. The Virtual Console opens in a new browser tab.
4. From the vKVM console, select Virtual Media to check for existing mappings. If any mappings exist (either vKVM-Mapped or CIMC-Mapped), eject them.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
Bona example ka tlase bakeng sa 'mapa oa khale o ka ntšoang.
Setšoantšo se latelang se bontša skrine ha ho se na limmapa tse lokiselitsoeng.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
5. From the vKVM console, select Virtual Media > vKVM-Mapped vDVD from the menu on the left side of the window to open the Map Virtual Media – CD/DVD dialog.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
6. Ka har'a Map Virtual Media – CD/DVD dialog box, browse to the locally stored SNA M6 appliance firmware ISO file, select it, and click Map Drive to map the local ISO to the SNA M6 appliance virtual drive.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
7. From the vKVM console, click Virtual Media from the menu on the left side of the window to verify that the ISO is mapped.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
8. Khetha Macros > Static Macros > Tlhaloso: CTRL-ALT-DEL to initiate the reboot process.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
9. Tobetsa konopo ea F6 key on your keyboard when the Cisco logo and boot messages appear in the vKVM console.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
10. Ha the Please select boot device: dialog box appears, select Cisco vKVM Mapped vDVD2.00.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
The firmware update initiates. The CIMC may reboot during the update process, causing a temporary loss of connection. If this occurs, log in to the CIMC again and re-launch the vKVM Console to continue monitoring the update. Once the firmware update is complete, the ISO will be ejected or unmounted, and the SNA appliance will reboot.
11. Verify on the CIMC Chassis Summary page that the firmware has been updated.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
Ho kenya ho Sebelisa CIMC-Mapped vDVD
Mokhoa ona oa ho kenya o nchafatsa firmware ka ho fihlella ntlafatso ea firmware ea ISO file e bolokiloe ho seva sa HTTP/S se fumanehang ho tsoa ho CIMC.
To install the firmware patch from an ISO image, use the vKVM console on the M6 machine.
1. Kena ho sebopeho sa yuniti sa Cisco Integrated Management Controller (CIMC) u sebelisa a web sebatli.
2. Khetha Launch KVM on the toolbar, if prompted, select HTML based KVM.
Taba e ncha ea sebatli e buloa bakeng sa khomphutha ea KVM, e bonts'ang lethathamo la lintho tsa menyu ka lehlakoreng le letšehali la fensetere.
3. From the vKVM console, select Virtual Media to check for existing mappings. If any mappings exist (either vKVM-Mapped or CIMC-Mapped), eject them.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
Bona example ka tlase bakeng sa 'mapa oa khale o ka ntšoang.
Setšoantšo se latelang se bontša skrine ha ho se na limmapa tse lokiselitsoeng.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
4. From the vKVM console, select Virtual Media > CIMC-Mapped vDVD from the menu on the left side of the window to open the Map Virtual Media – CD/DVD puisano.
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.
Khoasolla le ho Kenya
5. Ka har'a Map Virtual Media – CD/DVD dialog box, complete the following steps:
a. Lenaneong la Lebitso field, enter a descriptive name (for example, Firmware_ 2025).
b. Lenaneong la File Sebaka field, enter the path to the ISO file.
c. If required, enter the Username le Password.
d. Tlanya Map Drive.
6. From the vKVM console, click Virtual Media to verify that the mapping is in effect.
7. From the vKVM console, select Macros > Static Macros > Ctrl-Alt-Del to initiate the reboot process.
8. Tobetsa konopo ea F6 key on your keyboard when the Cisco logo and boot messages appear in the vKVM console.
9. Ha the Please select boot device: dialog box appears, select Cisco CIMC-Mapped vDVD2.00.
The firmware update initiates. The CIMC may reboot during the update process, after which the firmware update will continue. A CIMC reboot will cause a temporary loss of connection. Log in to the CIMC again and re launch the vKVM Console to monitor the update progress.
After the firmware update is complete, the ISO will not be automatically unmapped. Be sure to manually unmap the ISO before performing another reboot.
10. In the vKVM console, after you see the message Tsohle files copied and verified, the ISO has been loaded, and the firmware update begins. At this point, it is safe to eject or unmap the previously mapped firmware ISO.
11. From the vKVM console, select Virtual Media and click the name of the previously configured mapping to eject or unmap it.
12. Tobetsa Netefatsa to unmap the ISO file.
The firmware update continues, and the next reboot will start the SNA M6 appliance.
13. Holima CIMC Chassis Summary page, verify that the firmware has been updated to the expected version.
Ho ikopanya le Tšehetso
Haeba o hloka tšehetso ea tekheniki, ka kopo etsa e 'ngoe ea tse latelang:
- Ikopanye le Cisco Partner ea hau ea lehae
- Ikopanye le Cisco Support
o Ho bula nyeoe ka web: http://www.cisco.com/c/en/us/support/index.html
o Ho bula nyeoe ka lengolo-tsoibila: tac@cisco.com
o Bakeng sa tšehetso ea mohala: 1-800-553-2447 (US)
o Bakeng sa linomoro tsa tšehetso lefatšeng ka bophara: www.cisco.com/en/US/partner/support/tsd_cisco_worldwide_contacts.html
Litaba tsa Copyright
Cisco le logo ea Cisco ke matšoao a khoebo kapa matšoao a ngolisitsoeng a Cisco le/kapa mafapha a eona a US le linaheng tse ling. Ho view lethathamo la matšoao a khoebo a Cisco, e ea ho sena URL: https://www.cisco.com/go/trademarks. Matshwao a kgwebo a motho wa boraro a boletsweng ke thepa ya beng ba ona. Tšebeliso ea lentsoe molekane ha e bolele kamano ea tšebelisano pakeng tsa Cisco le k'hamphani efe kapa efe. (1721R) Litokelo tsohle li sirelelitsoe.
Litokomane / Lisebelisoa
 |
Cisco 5.250030 Secure Network Analytics [pdf] Bukana ea Mosebelisi Manager 2300, Data Node 6300, Flow Collector 4300, Flow Sensor 1300, Flow Sensor 3300, Flow Sensor 4300, 5.250030 Secure Network Analytics, 5.250030, Secure Network Analytics, Network Analytics, Analytics |