BOARDCON CMT113 Allwinner Sistimi Ho Mojule
FAQs
- Q: Nyeoe ea mantlha ea tšebeliso ea sistimi ea CMT113-on-module ke efe?
- A: CMT113 e etselitsoe taolo e bohlale le lisebelisoa tse bonts'ang joalo ka lilaoli tsa indasteri le lisebelisoa tsa makoloi.
- Q: ke lintlha life tsa bohlokoa tsa CMT113?
- A: CMT113 e na le processor ea Allwinner's T113, HiFi4 DSP, memori ea 128MB DDR3, le tšehetso bakeng sa khouto ea video ea 1080p le ho e hlalosa.
Selelekela
Mabapi le Bukana ena
- Bukana ena e reretsoe ho fa mosebedisi ho fetaview ea boto le melemo, lintlha tse felletseng tsa likarolo, le mekhoa ea ho seta. E na le boitsebiso ba bohlokoa ba tšireletso hape.
Maikutlo le Nchafatso ea Bukana ena
- Ho thusa bareki ba rona ho sebelisa lihlahisoa tsa rona hamolemo, re lula re etsa hore lisebelisoa tse ling tse nchafalitsoeng li fumanehe ho Boardcon websaete (www.boardcon.com, www.armdesigner.com).
- Tsena li kenyelletsa libuka, lintlha tsa kopo, mohlala oa lenaneoamples, le software e ntlafalitsoeng le hardware.
Kena nako le nako ho bona tse ncha!
- Ha re beha mosebetsi pele ho lisebelisoa tsena tse nchafalitsoeng, maikutlo a tsoang ho bareki ke tšusumetso ea pele, Haeba u na le lipotso, maikutlo, kapa matšoenyeho ka sehlahisoa kapa morero oa hau, ka kopo u se ke oa qeaqea ho ikopanya le rona ho support@armdesigner.com.
Tiisetso e Lekanyelitsoeng
- Boardcon e fana ka tumello ea hore sehlahisoa sena se se be le bofokoli ba thepa le moetso oa selemo ho tloha ka letsatsi la theko. Nakong ena ea tiisetso, Boardcon e tla lokisa kapa e nkele sebaka se nang le bothata ho latela ts'ebetso e latelang:
- Khopi ea invoice ea mantlha e tlameha ho kenyeletsoa ha o khutlisetsa unit e nang le bothata ho Boardcon. Tiisetso ena e lekanyelitsoeng ha e koahele litšenyehelo tse bakoang ke ho khantša kapa ho kenngoeng ha motlakase, tšebeliso e mpe, tšebeliso e mpe, maemo a sa tloaelehang a ts'ebetso, kapa liteko tsa ho fetola kapa ho fetola tšebetso ea sehlahisoa.
- Tiisetso ena e lekanyelitsoe ho lokisa kapa ho nkela sebaka se senyehileng. Ha ho ketsahalo e tla ba le boikarabello kapa boikarabello bakeng sa tahlehelo kapa ts'enyehelo efe kapa efe, ho kenyeletsoa empa e sa lekanyetsoe ho phaello efe kapa efe e lahlehileng, ts'enyehelo ea tšohanyetso kapa ea litlamorao, tahlehelo ea khoebo, kapa phaello e lebelletsoeng e bakoang ke ts'ebeliso kapa ho se khone ho sebelisa sehlahisoa sena.
- Litokiso tse entsoeng ka mor'a ho fela ha nako ea tiisetso li itšetlehile ka tefiso ea tokiso le litšenyehelo tsa ho khutlisa thepa. Ka kopo ikopanye le Boardcon ho hlophisa litšebeletso life kapa life tsa tokiso le ho fumana leseli la tefiso ea tokiso.
Kakaretso
Sistimi ea CMT113-on-module e kentsoe ka Allwinner's T113 Dual-core Cortex-A7, HiFi4 DSP, 'me e kentsoe ka 128MB DDR3. E etselitsoe ka ho khetheha bakeng sa taolo e bohlale le lisebelisoa tse bonts'ang joalo ka lilaoli tsa indasteri le lisebelisoa tsa likoloi. Tharollo ea theko e tlase le e tlase e ka thusa bareki ho hlahisa theknoloji e ncha kapele le ho ntlafatsa katleho ea tharollo. Haholo-holo, T113 e tšehetsa 1080p@60bps encode le decode process.
Likaroloana
- Microprocessor
- Dual-core Cortex-A7 ho fihla ho 1.2G
- 32KB L1 I-cache, 32KB L1 D-cache per Core, 256KB L2 cache
- HiFi4 Audio DSP
- 32KB I-cache, 32KB D-cache, 64KB I-ram, 64KB D-ram
- Memori Mokhatlo
- 128MB DDR3 ka chip
- EMMC ho fihlela ho 64GB
- Qala ROM
- E ts'ehetsa ho jarolla khoutu ea sistimi ka USB OTG
- Tšireletso ID
- 2Kbit OTP e-Fuse
- Setsi sa video / Encoder
- E tšehetsa li-decoding tsa video ho fihla ho 1080p@60fps
- E tšehetsa H.264/265 decode
- JPEG/MJPEG e khouta ho fihla ho 1080p@60fps
- Hlahisa Subsystem
- Sephetho sa Video
- E ts'ehetsa 4-lane MIPI DSI ho fihla ho 1920×1200@60fps
- E ts'ehetsa sebopeho sa LVDS Lihokelo tse peli ho fihla ho 1920×1080@60fps le sehokelo se le seng ho fihla ho 1366×768@60fps
- E tšehetsa sebopeho sa RGB ho fihla ho 1920 × 1080@60fps
- E tšehetsa BT656 segokanyimmediamentsi sa sebolokigolo bakeng sa PAL/NTSC
- E tšehetsa segokanyimmediamentsi sa sebolokigolo sa RGB ho fihla ho 800×480@60fps
- CVBS e le 'ngoe e tsoa ka 10bits DAC
- Kenyelletso ea video
- E tšehetsa 8bit parallel input interfaces
- E tšehetsa BT656/601 interface
- Kenyelletso ea liteishene tse peli tsa CVBS tse nang le 10bits ADC
- Sephetho sa Video
- Molaetsa oa analog
- E 'ngoe ea li-headphone tsa stereo
- Kenyelletso ea Mela e 'meli ea stereo
- Phapang e le 'ngoe kapa ea pheletso e le 'ngoe ea MIC
- I2S/PCM/ AC97
- Tšehetsa 2-ch I2S/PCM segokanyimmediamentsi sa sebolokigolo
- Tšehetsa ho fihla ho 8-CH DMIC
- Tšehetsa tlhahiso ea 1-ch SPDIF le tlhahiso ea 1-ch SPDIF
- USB
- Li-interface tse peli tsa USB 2.0
- USB DRD e le 'ngoe le sebopeho se le seng sa moamoheli oa USB
- Ethernet
- Khokahano e le 'ngoe ea Ethernet
- Ts'ehetsa sebopeho sa GMAC kapa EMAC
- I2C
- Ho fihlela ho 4-ch I2Cs
- Mokhoa o tloaelehileng oa ts'ehetso le mokhoa o potlakileng (ho fihla ho 400kbit / s)
- SPI
- Balaoli ba SPI ba le bang
- Full-duplex synchronous serial interface
- 4 kapa 6-terata mode
- Ts'ehetsa mokhoa oa DBI bakeng sa bese e bonts'ang
- KOLOI
- Ho fihla ho balaoli ba UART ba 6
- UART0 ea kamehla bakeng sa debug
- E lumellana le maemo a indasteri a 16450/16550 UART
- Ts'ehetsa mokhoa oa RS485 ho lithapo tse 4 tsa UART
- KA
- Ts'ehetsa protocol ea CAN2.0A/B
- Tšehetsa mokhoa oa ho mamela feela
- CIR
- Balaoli ba CIR RX e le 'ngoe
- Flexible receiver bakeng sa moreki IR taolo e hole
- Balaoli ba CIR TX e le 'ngoe
- 128 li-byte FIFO
- ADC
- Kenyelletso ea ADC ea kanale e le 'ngoe
- Qeto ea 12-bit
- MoqtagE kenya letsoho pakeng tsa 0V le 1.8V
- RTP ADC
- 12-bit SAR mofuta oa ADC
- MoqtagE kenya letsoho pakeng tsa 0V le 1.8V
- Tšehetsa 4-wire resistive TP
- Ts'ehetsa tlhahiso ea 4-ch Aux ADC
- PWM
- Ho fihlela liteishene tse 8 tsa PWM le balaoli ba 4 ba PWM
- ho fihla ho 24/100MHz frequency ea tlhahiso
- Qeto e fokolang ke 1/65536
- Khaotsa Molaoli
- Tšehetso e kholo ea 23 e sitisa
- Sehlopha sa matla
- Discrete Power ka botong, matla a le mong (5V).
- DCDC 3.3V le 1.8V tlhahiso (boholo: 500mA)
- Audio analog Power e ikemetseng (1V8)
- RTC e tlase haholo e sebelisa hajoale, e ka tlase ho 5uA ho 3V Button Cell
- Mocheso
- Boemo ba indasteri, mocheso oa ho sebetsa: -40 ~ 85°C
- Boemo ba likoloi, mocheso oa ho sebetsa: -40 ~ 125°C
Setšoantšo se Thibeloang
Setšoantšo sa T113 Block
Boto ea nts'etsopele (EMT113) Block Diagram
Litsebi tsa CMT113
| Sebopeho | Litlhaloso |
| CPU | Dual-core Cortex-A7 |
| DDR | 128MB DDR3 |
| eMMC LEHLANYA | 8GB (ho fihla ho 64GB) |
| Matla | DC 5V |
| LCD ea LVDS | 1CH ho fihla ho li-LVDS tse peli |
| - DSI LCD | 1CH 4-Lane MIPI (khetho) |
| - RGB LCD | 1CH LCD(24bit) (khetho) |
| I2S | EA-2-CH |
| Khamera ea DVP | EA-1-CH |
| USB | 1-CH Host, 1-CH DRD(OTG 2.0) |
| Ethernet | 1 RGMII/RMII interface |
| SDMMC/SDIO | EA-2-CH |
| SPDIF RX/TX | EA-1-CH |
| I2C | EA-4-CH |
| SPI | EA-1-CH |
| KA | EA-1-CH |
| Sebopeho | Litlhaloso |
| KOLOI | 5-CH, 1-CH(DEBUG) |
| PWM | EA-8-CH |
| ADC IN | 1-CH le 4-CH Aux |
| Boto Dimension | 36 x 30 limilimithara |
Boemo ba CMT113 PCB
Tlhaloso: CMT113 Pin
| Pin | Letshwao | Tlhaloso | Mesebetsi e meng | Moqtage |
| 1 | VCC_SYS | Kenyelletso e Matla ea Matla | 3.4V-5.5V | |
| 2 | VCC_SYS | Kenyelletso e Matla ea Matla | 3.4V-5.5V | |
| 3 | VCC_SYS | Kenyelletso ea Matla a Maholo | 3.4V-5.5V | |
| 4 | OWEN | Matla ON/OFF Taolo | 3.4V-5.5V | |
| 5 | GND | Fatše | 0V | |
| 6 | GND | Fatše | 0V | |
| 7 | SOC_3V3 | 3.3V Motlakase oa motlakase | 3.3V | |
| 8 | SOC_1V8 | 1.8V Motlakase oa motlakase | 1.8V | |
| 9 | GND | Fatše | 0V | |
| Pin | Letshwao | Tlhaloso | Mesebetsi e meng | Moqtage |
|
10 |
PD10/LCD0- D14/LVDS1-
V0P/SPI1-CS&DBI- CSX |
LVDS1 kantle kapa PWM6 |
PD-EINT10 |
0.6V/3.3V |
|
11 |
PD11/LCD0- D15/LVDS1- V0N/SPI1-
CLK&DBI-SCLK |
LVDS1 e tsoa kapa UART3_TX |
PD-EINT11 |
0.6V/3.3V |
|
12 |
PD12/LCD0- D18/LVDS1- V1P/SPI1-
MOSI&DBI-SDO |
LVDS1 e tsoa kapa UART3_RX |
PD-EINT12 |
0.6V/3.3V |
|
13 |
PD13/LCD0- D19/LVDS1- V1N/SPI1- MISO&DBI-
SDI&DBI-TE&DBI- DCX |
LVDS1 e tsoa kapa TWI0_SDA |
PD-EINT13 |
0.6V/3.3V |
|
14 |
PD14/LCD0- D20/LVDS1- V2P/SPI1- HOLD&DBI-
DCX&DBI-WRX |
LVDS1 e tsoa kapa UART3_CTS |
PD-EINT14 |
0.6V/3.3V |
|
15 |
PD15/LCD0- D21/LVDS1-
V2N/SPI1-WP&DBI- TE |
LVDS1 e tsoa kapa IR_RX |
PD-EINT15 |
0.6V/3.3V |
|
16 |
PD16/LCD0- D22/LVDS1- CKP/DMIC-
DATA3/PWM0 |
LVDS1 kantle kapa GPIO |
PD-EINT16 |
0.6V/3.3V |
|
17 |
PD17/LCD0- D23/LVDS1- CKN/DMIC-
DATA2/PWM1 |
LVDS1 kantle kapa GPIO |
PD-EINT17 |
0.6V/3.3V |
|
18 |
PD18/LCD0- CLK/LVDS1- V3P/DMIC-
DATA1/PWM2 |
LVDS1 kantle kapa GPIO |
PD-EINT18 |
0.6V/3.3V |
|
19 |
PD19/LCD0- DE/LVDS1- V3N/DMIC-
DATA0/PWM3 |
LVDS1 kantle kapa GPIO |
PD-EINT19 |
0.6V/3.3V |
|
20 |
PD20/LCD0- HSYNC/TWI2- SCK/DMIC-
CLK/PWM4 |
PD-EINT20 |
3.3V |
|
|
21 |
PD21/LCD0- VSYNC/TWI2- SDA/UART1-
TX/PWM5 |
PD-EINT21 |
3.3V |
|
| 22 | GND | Fatše | 0V | |
| 23 | TVOUT0 | CVBS TSOA | 0.8V | |
| 24 | AVCC_1.8V | Kenyelletso ea Matla a Audio | 1.8V | |
| 25 | MICN3P | Kenyelletso e ntle ea maekrofono | 0.8V | |
| 26 | MICN3N | Kenyelletso e fosahetseng ea maekrofono | 0.8V | |
| Pin | Letshwao | Tlhaloso | Mesebetsi e meng | Moqtage |
| 27 | TS'OANANG | Setsi sa Audio | 0V | |
| 28 | GND | Fatše | 0V | |
| 29 | FMINR | FM ka ho le letona | 0.8V | |
| 30 | FMINL | FM e tlohetse Line ho | 0.8V | |
| 31 | LINEINR | Right Line ho | 0.8V | |
| 32 | LINEINL | Left Line in | 0.8V | |
| 33 | GND | Fatše | 0V | |
| 34 | HPOUTR | Phatlalatso ea mocha oa headphone o nepahetseng | 0.8V | |
| 35 | HPOUTL | Molumo o tsoang ka letsohong le letšehali | 0.8V | |
| 36 | HPOUTFB | Li-headphone Feedback | 0V | |
| 37 | GND | Fatše | 0V | |
| 38 | GPADC0 | Tlatsetso ea ADC | 1.8V | |
| 39 | TP-X1 | Aux ADC ka | 1.8V | |
| 40 | TP-X2 | Aux ADC ka | 1.8V | |
| 41 | TP-Y1 | Aux ADC ka | 1.8V | |
| 42 | TP-Y2 | Aux ADC ka | 1.8V | |
| 43 | GND | Fatše | 0V |
| 44 | TVIN0 | Tlhahiso ea CVBS0 | 0.8V | |
| 45 | TVIN1 | Tlhahiso ea CVBS1 | 0.8V | |
| 46 | GND | Fatše | 0V | |
| 47 | USB1-DP | 3.3V | ||
| 48 | USB1-DM | 3.3V | ||
| 49 | USB0-DP | 3.3V | ||
| 50 | USB0-DM | 3.3V | ||
| 51 | GND | Fatše | 0V | |
|
52 |
PG0/SDC1-CLK |
RGMII_RXCTRL/RMII_CRS_DV
/UART3_TX/PWM7 |
PG-EINT0 |
3.3V(Note1) |
|
53 |
PG1/SDC1-CMD |
RGMII_RXD0/RMII_RXD0/UAR
T3_RX/PWM6 |
PG-EINT1 |
3.3V |
|
54 |
PG2/SDC1-D0 |
RGMII_RXD1/RMII_RXD1/UAR
T3_RTS/UART4_TX |
PG-EINT2 |
3.3V |
|
55 |
PG3/SDC1-D1 |
RGMII_TXCK
/RMII_TXCK/UART3_CTS/UAR T4_RX |
PG-EINT3 |
3.3V |
|
56 |
PG5/SDC1-D3 |
RGMII_TXD1/RMII_TXD1/UART
5_RX/PWM4 |
PG-EINT5 |
3.3V |
|
57 |
PG4/SDC1-D2 |
RGMII_TXD0/RMII_TXD0/UART
5_TX/PWM5 |
PG-EINT4 |
3.3V |
|
58 |
PG12/I2S1-LRCK |
RGMII_TXCTRL/RMII_TXEN/T WI0_SCK
/UART1_TX/CLK_FANOUT2/P WM0 |
PG-EINT12 |
3.3V |
| Pin | Letshwao | Tlhaloso | Mesebetsi e meng | Moqtage |
|
59 |
PG13/I2S1-BCLK |
RGMII_CLKIN/RMII_RXER/TWI 0_SDA/UART1_RX/LEDC_DO/
PWM2 |
PG-EINT13 |
3.3V |
|
60 |
PG14/I2S1-DIN0 |
MDC/TWI2_SCK/UART1_RTS/I
2S1_DOUT1 |
PG-EINT14 |
3.3V |
|
61 |
PG15/I2S1-DOUT0 |
MDIO/TWI2_SDA/UART1_CTS/I
2S1_DIN1 |
PG-EINT15 |
3.3V |
|
62 |
PG6/UART1-TX |
RGMII_TXD2/TWI2_SCK/PWM
1 |
PG-EINT6 |
3.3V |
|
63 |
PG7/UART1-RX |
RGMII_TXD3/TWI2_SDA/OWA_
IN |
PG-EINT7 |
3.3V |
|
64 |
PG8/UART1-RTS |
RGMII_RXD2/TWI1_SCK/UART
3_TX |
PG-EINT8 |
3.3V |
|
65 |
PG9/UART1-CTS |
RGMII_RXD3/TWI1_SDA/UART
3_RX |
PG-EINT9 |
3.3V |
|
66 |
PG10/PWM3 |
RGMII_RXCK/TWI3_SCK/IR_R
X/CLK_FANOUT0 |
PG-EINT10 |
3.3V |
|
67 |
PG11/I2S1-MCLK |
EPHY_25M/TWI3_SDA/TCON_
TRIG/CLK_FANOUT1 |
PG-EINT11 |
3.3V |
| 68 | GND | Fatše | 0V | |
|
69 |
PB3/I2S2- DOUT1/TWI0-
SCK/UART4-RX |
I2S2_DIN0/CAN0_RX/LCD0_D1 /LCD0_D19 |
PB-EINT3 |
3.3V |
|
70 |
PB2/I2S2- DOUT2/TWI0-
SDA/UART4-TX |
I2S2_DIN2/CAN0_TX/LCD0_D0 /LCD0_D18 |
PB-EINT2 |
3.3V |
|
71 |
PB6/I2S2- LRCK/TWI3-
SCK/UART3-TX |
CPUBIST0/LCD0_D16/LCD0_D 22/PWM1 |
PB-EINT6 |
3.3V |
|
72 |
PB7/I2S2- MCLK/TWI3-
SDA/UART3-RX |
CPUBIST1/LCD0_D17/LCD0_D 23/IR_RX |
PB-EINT7 |
3.3V |
|
73 |
PB5/I2S2-
BCLK/PWM0/UART 5-RX |
LCD0_D9/LCD0_D21 |
PB-EINT5 |
3.3V |
|
74 |
PB4/I2S2- DOUT0/TWI1-SCK
/UART5-TX |
LCD0_D8/LCD0_D20 |
PB-EINT4 |
3.3V |
| 75 | GND | Fatše | 0V | |
|
76 |
PF2/SDC0-CLK |
UART0_TX/TWI0_SCK/OWA_I
N/LEDC_DO |
PF-EINT2 |
3.3V |
| 77 | GND | Fatše | 0V | |
|
78 |
PF0/SDC0-D1 |
JTAG_MS/I2S2_DIN0/I2S2_DO
UT1 |
PF-EINT0 |
3.3V |
|
79 |
PF1/SDC0-D0 |
JTAG_DI/I2S2_DIN1/I2S2_DOU
T0 |
PF-EINT1 |
3.3V |
| Pin | Letshwao | Tlhaloso | Mesebetsi e meng | Moqtage |
| 80 | PF3/SDC0-CMD | JTAG_DO/I2S2_BCK | PF-EINT3 | 3.3V |
|
81 |
PF4/SDC0-D3 |
UART0_RX/TWI0_SDA/IR_TX/P
WM6 |
PF-EINT4 |
3.3V |
| 82 | PF5/SDC0-D2 | JTAG_CK/I2S2_LRCK | PF-EINT5 | 3.3V |
| 83 | PF6/IR-RX/PWM5 | OWA_OUT/I2S2_MCK | PF-EINT6 | 3.3V |
| 84 | GND | Fatše | 0V | |
| 85 | REFELLE-TS'OANE | 3.3V | ||
| 86 | 32.768KHz-OUT | RTC CLKOUT(PU 2K) | 3.3V | |
| 87 | GND | Fatše | 0V | |
| 88 | VBUCK | Tlhahiso ea matla a RTC | 3.3V | |
| 89 | GND | Fatše | 0V | |
| 90 | GND | Fatše | 0V | |
| 91 | RETS'ELISITSOE | RETS'ELISITSOE TSOA | 3.3V |
| 92 | GND | Fatše | 0V | |
|
93 |
PE13/TWI2-
SDA/PWM5 |
RGMII_RXD2/DMIC_DATA3
(PU 2K)(Note2) |
PE-EINT13 |
3.3V |
|
94 |
PE12/TWI2-
SCK/NCSI0-TŠAMO |
RGMII_TXD3/NCSI0_FIFLD
(PU 2K)(Note2) |
PE-EINT12 |
3.3V |
| 95 | GND | Fatše | 0V | |
|
96 |
PE3/NCSI0-
MCLK/UART2-RX |
RGMII_TXCK/RMII_TXCK/UAR
T0_RX/TWI0_SDA/CLK_FANO1 |
PE-EINT3 |
3.3V |
| 97 | GND | Fatše | 0V | |
|
98 |
PE2/NCSI0-
PCLK/UART2-TX |
RGMII_RXD1/RMII_RXD1/UAR
T0_TX/TWI0_SCK/CLK_FANO0 |
PE-EINT2 |
3.3V |
| 99 | GND | Fatše | 0V | |
|
100 |
PE11/NCSI0-
D7/UART1-RX |
RGMII_TXD2/JTAG_CK |
PE-EINT11 |
3.3V |
|
101 |
PE10/NCSI0-
D6/UART1-TX |
EPHY_25M/JTAG_DO/IR_RX/P
WM4 |
PE-EINT10 |
3.3V |
|
102 |
PE9/NCSI0-
D5/UART1-CTS |
MDIO/JTAG_DI/UART3_RX/PW
M3 |
PE-EINT9 |
3.3V |
|
103 |
PE8/NCSI0-
D4/UART1-RTS |
MDC/JTAG_MS/UART3_TX/PW
M2 |
PE-EINT8 |
3.3V |
|
104 |
PE7/NCSI0- D3/UART5-RX |
RGMII_CLKIN/RMII_RXER/D- JTAG_CK/TWI3_SDA/OWA_OU
T |
PE-EINT7 |
3.3V |
|
105 |
PE6/NCSI0-
D2/UART5-TX |
RGMII_TXCTRL/RMII_TXEN/D-
JTAG_DO/TWI3_SCK/OWA_IN |
PE-EINT6 |
3.3V |
|
106 |
PE5/NCSI0-
D1/UART4-RX |
RGMII_TXD1/RMII_TXD1/D-
JTAG_DI/TWI2_SDA/LEDC_DO |
PE-EINT5 |
3.3V |
|
107 |
PE4/NCSI0- D0/UART4-TX |
RGMII_TXD0/RMII_TXD0/ D- JTAG_MS/TWI2_SCK/CLK_FAN
O2 |
PE-EINT4 |
3.3V |
| Pin | Letshwao | Tlhaloso | Mesebetsi e meng | Moqtage |
| 108 | GND | Fatše | 0V | |
|
109 |
PE0/NCSI0- HSYNC/UART2-
RTS |
RGMII_RXCTRL/RMII_CRS_DV /TWI1_SCK/LCD0_HSYNC |
PE-EINT0 |
3.3V(Note1) |
|
110 |
PE1/NCSI0-
VSYNC/UART2- CTS |
RGMII_RXD0/RMII_RXD0/TWI1 _SDA/LCD0_VSYNC |
PE-EINT1 |
3.3V |
|
111 |
PD22/OWA-OUT/IR- RX/UART1-
RX/PWM7 |
Ke hloka NC (Note3) |
PD-EINT22 |
3.3V |
| 112 | GND | Fatše | 0V |
|
113 |
PD0/LCD0-
D2/LVDS0-V0P/DSI- D0P |
LVDS0/DSI kapa GPIO |
0.6V/3.3V |
|
|
114 |
PD1/LCD0- D3/LVDS0-
V0N/DSI-D0N |
LVDS0/DSI kapa TWI0_SCK |
PD-EINT0 |
0.6V/3.3V (Tlhokomeliso1) |
|
115 |
PD2/LCD0-
D4/LVDS0-V1P/DSI- D1P |
LVDS0/DSI kapa UART2_TX |
PD-EINT1 |
0.6V/3.3V |
|
116 |
PD3/LCD0- D5/LVDS0-
V1N/DSI-D1N |
LVDS0/DSI kapa UART2_RX |
PD-EINT2 |
0.6V/3.3V |
|
117 |
PD4/LCD0-
D6/LVDS0-V2P/DSI- CKP |
LVDS0/DSI kapa UART2_RTS |
PD-EINT3 |
0.6V/3.3V |
|
118 |
PD5/LCD0- D7/LVDS0-
V2N/DSI-CKN |
LVDS0/DSI kapa UART2_CTS |
PD-EINT4 |
0.6V/3.3V |
|
119 |
PD6/LCD0- D10/LVDS0-
CKP/DSI-D2P |
LVDS0/DSI kapa UART5_TX |
PD-EINT5 |
0.6V/3.3V |
|
120 |
PD7/LCD0- D11/LVDS0-
CKN/DSI-D2N |
LVDS0/DSI kapa UART5_RX |
PD-EINT6 |
0.6V/3.3V |
|
121 |
PD8/LCD0-
D12/LVDS0- V3P/DSI-D3P |
LVDS0/DSI kapa UART4_TX |
PD-EINT7 |
0.6V/3.3V |
|
122 |
UPD9/LCD0- D13/LVDS0-
V3N/DSI-D3N |
LVDS0/DSI kapa UART4_RX |
PD-EINT8 |
0.6V/3.3V |
| Hlokomela
1. PD/PE/PG likarolo GPIO voltage ka fetoha ho 1V8. 2. Ea kamehla e sebelisoang bakeng sa I2C, e ke ke ea sebelisoa bakeng sa GPIO. 3. Ka kopo, e sebelisoa bakeng sa tšitiso ea RTC, NC Pin ena. |
||||
Development Kit (EMT113)
Tataiso ea Moralo oa Hardware
Peripheral Circuit Reference
Matla a Kantle
Debug Circuit
USB OTG Interface Circuit
Litšobotsi tsa Motlakase oa Sehlahisoa
Ho senya le Mocheso
| Letšoao | Paramethara | Min | Tlanya | Max | Yuniti |
| DCIN | Sesebelisoa sa Voltage | 3.4 | 5 | 5.5 | V |
| Idcin | Kenyelletso ea DCIN Hona Joale | 430 | mA | ||
| AVCC_1.8V | Analog Audio Voltage | 1.8 | V | ||
| Iavcc_in | Kenyelletso ea AVCCIN Hona joale | 300 | mA | ||
| SOC_1V | Pheriferale 1.8 Moqtage | 1.8 | V | ||
| Ke tlohile | Output Current | 500 | mA | ||
| SOC_3V3 | Pheriferale 3.3 Moqtage | 3.3 | V | ||
| Ke tlohile | Output Current | 500 | mA | ||
| VCC_RTC | Phatlalatso ea RTCtage | 1.8 | 3 | 3.4 | V |
| Irtc | Kenyelletso ea RTC Hona joale | 5 | 8 | uA | |
| Ta | Mocheso oa ho sebetsa | -40 | 85 | °C | |
| Tstg | Mocheso oa polokelo | -40 | 120 | °C |
Botšepehi ba Teko
| Teko ea Ts'ebetso ea Mocheso o Phahameng | ||
| Litaba | E sebetsa 8h ka mocheso o phahameng | 55 ° C ± 2 ° C |
| Sephetho | TDB | |
| Teko ea Bophelo ea Ts'ebetso | ||
| Litaba | Ho sebetsa ka kamoreng | 120h |
| Sephetho | TDB | |
Litokomane / Lisebelisoa
 |
BOARDCON CMT113 Allwinner Sistimi Ho Mojule [pdf] Bukana ea Mosebelisi CMT113, CMT113 Allwinner System On Module, Allwinner System On Module, System On Module, Module |