Beijer Electronics GT-22CA Digital Output Module
Litlhaloso
- Mohlala: GT-22CA Digital Output Module
- Likanale: 32
- Moqtage: 24 VDC
- Hona joale: 0.3 A
- Mofuta oa Mohloli: Mohloli
- Mofuta oa Sehokelo: 40 pt sehokelo
Mabapi le Bukana ena
Bukana ena e na le lintlha tse mabapi le software le likarolo tsa hardware tsa Beijer Electronics GT-22CA Digital Output Module. E fana ka litlhaloso tse tebileng, tataiso mabapi le ho kenya, ho seta, le tšebeliso ea sehlahisoa.
Matshwao a Sebedisitsweng Bukaneng ena
Sengoliloeng sena se kenyelletsa Temoso, Tlhokomeliso, Tlhokomeliso le matšoao a Bohlokoa moo ho loketseng, ho supa lintlha tse amanang le polokeho, kapa lintlha tse ling tsa bohlokoa. Matšoao a tšoanang a lokela ho hlalosoa ka tsela e latelang:
TLHOKOMELO
Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe, le tšenyo e kholo sehlahisoa.
TLHOKOMELO
Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng, le tšenyo e itekanetseng sehlahisoa.
HLOKOMELA
Letšoao la Note le hlokomelisa 'mali ka lintlha le maemo a amehang.
BOHLOKOA
Letšoao la Bohlokoa le totobatsa lintlha tsa bohlokoa.
Polokeho
Pele o sebelisa sehlahisoa sena, ka kopo bala bukana ena le libuka tse ling tse amehang ka hloko. Ela hloko ka botlalo litaelo tsa polokeho!
Leha ho le joalo, Beijer Electronics e ke ke ea ikarabella kapa ea ikarabella bakeng sa tšenyo e bakiloeng ke tšebeliso ea sehlahisoa sena.
Litšoantšo, mohlalaampLits'oants'o le litšoantšo bukeng ena li kenyelelitsoe molemong oa ho etsa litšoantšo. Ka lebaka la mefuta e mengata e fapaneng le litlhoko tse amanang le ts'ebetso efe kapa efe e itseng, Beijer Electronics e ke ke ea nka boikarabello kapa boikarabello bakeng sa ts'ebeliso ea 'nete e ipapisitseng le maemo a khale.amples le litšoantšo.
Setifikeiti sa Sehlahisoa
Sehlahisoa se na le litifikeiti tse latelang tsa sehlahisoa.
Litlhoko tse akaretsang tsa polokeho
TLHOKOMELO
- U se ke ua kopanya lihlahisoa le lithapo ka matla a hokahaneng le sistimi. Ho etsa joalo ho baka "arc flash", e ka fellang ka liketsahalo tse kotsi tse sa lebelloang (ho chesa, mollo, lintho tse fofang, khatello ea ho phatloha, ho phatloha ha molumo, mocheso).
- Se ke oa ama li-terminal blocks kapa li-module tsa IO ha sistimi e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane kapa ho se sebetse hantle ha sesebelisoa.
- Le ka mohla u se ke ua lumella lintho tsa tšepe tse ka ntle ho ama sehlahisoa ha tsamaiso e ntse e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane kapa ho se sebetse hantle ha sesebelisoa.
- U se ke ua beha sehlahisoa haufi le thepa e tukang. Ho etsa joalo ho ka baka mollo.
- Mosebetsi oohle oa lithapo o lokela ho etsoa ke moenjiniere oa motlakase.
- Ha u sebetsana le li-module, etsa bonnete ba hore batho bohle, sebaka sa mosebetsi le ho paka li thehiloe hantle. Qoba ho ama likarolo tsa conductive, li-module li na le likarolo tsa elektronike tse ka 'nang tsa senngoa ke ho tsoa ha electrostatic.
TLHOKOMELO
- Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mocheso o fetang 60 ℃. Qoba ho beha sehlahisoa letsatsing le tobileng.
- Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mongobo o fetang 90%.
- Kamehla sebelisa sehlahisoa libakeng tse nang le tekanyo ea 1 kapa 2 ea tšilafalo.
- Sebelisa likhoele tse tloaelehileng bakeng sa likhoele.
Mabapi le Sistimi ea letoto la G
Sistimi e felileview
- Network Adapter Module - Mojule oa adaptara ea marang-rang o theha sehokelo lipakeng tsa bese ea tšimo le lisebelisoa tsa masimong tse nang le li-module tsa katoloso. Khokahano ho litsamaiso tse fapaneng tsa libese tsa masimong e ka theoa ke mojule o mong le o mong o tsamaellanang oa adaptara ea netweke, mohlala, bakeng sa MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial joalo-joalo.
- Katoloso Mojule - Mefuta ea li-module tsa katoloso: Digital IO, Analog IO, le li-module tse khethehileng.
- Ho romella melaetsa - Sistimi e sebelisa mefuta e 'meli ea melaetsa: Melaetsa ea litšebeletso le melaetsa ea IO.
IO Process Data Mapping
Mojule oa katoloso o na le mefuta e meraro ea data: data ea IO, paramethara ea tlhophiso, le ngoliso ea memori. Phapanyetsano ea data pakeng tsa adaptara ea marang-rang le li-module tsa ho atolosa li etsoa ka data ea setšoantšo sa IO ka protocol ea ka hare.
Lintlha tsa setšoantšo le se hlahisoang li itšetlehile ka sebaka sa slot le mofuta oa data oa slot ea ho atolosa. Ho hlophisoa ha data ea setšoantšo sa ho kenya le ho tsoa ho ipapisitse le boemo ba sekotjana sa katoloso. Lipalo tsa tlhophiso ena li kenyelelitsoe libukeng tsa adaptara ea marang-rang le li-module tsa IO tse ka khonehang.
Lintlha tse sebetsang tsa parameter li ipapisitse le li-module tse sebelisoang. Bakeng sa mohlalaample, li-module tsa analoge li na le li-setting tsa 0-20 mA kapa 4-20 mA, 'me li-module tsa mocheso li na le li-setting tse kang PT100, PT200, le PT500. Litokomane tsa module ka 'ngoe li fana ka tlhaloso ea data ea parameter.
Litlhaloso
Litlhaloso tsa Tikoloho
| Mocheso oa ho sebetsa | -20°C – 60°C |
| UL mocheso | -20°C – 60°C |
| Mocheso oa polokelo | -40°C – 85°C |
| Mongobo o amanang | 5% - 90% e sa lumellaneng |
| Ho phahamisa | DIN seporo |
| Ts'ebetso ea ts'oenyeho | IEC 60068-2-27 (15G) |
| Khanyetso ea ho thothomela | IEC 60068-2-6 (4 g) |
| Likhase tsa indasteri | EN 61000-6-4: 2019 |
| Tšireletso ea indasteri | EN 61000-6-2: 2019 |
| Boemo ba ho kenya | E otlolohileng le e tshekaletseng |
| Setifikeiti sa lihlahisoa | CE, FCC, UL, cUL |
Litlhaloso Kakaretso
| Ho felloa ke matla | Max. 65 mA @ 5 VDC |
| Ho behwa ka thoko | I/O ho Logic: Ho itšehla thajana ha Photocoupler
Matla a tšimong: Ho se itšehle thajana |
| UL matla a tšimo | Phepelo voltage: 24 VDC lebitso, Sehlopha sa 2 |
| Matla a tšimo | Phepelo voltage: 24 VDC lebitso la Moqtagmefuta e fapaneng: 15-30 VDC
Phallo ea matla: 30 mA @ 24 VDC |
| Wiring | Sehokelo sa module: HIF3BA-40D-2.54R |
| Boima ba 'mele | 63 g |
| Boholo ba module | 12 mm x 109 mm x 70 mm |
Litekanyo
Mojule litekanyo (limilimithara)
Litlhaloso tsa Sephetho
| Sephetho ka mojule | 32 lintlha tsa mofuta oa mohloli |
| Lipontšo | 32 boemo ba tlhahiso e tala |
| Sephetho voltage fapaneng | 24 VDC lebitso
15 VDC – 30 VDC @ 60 ℃ |
| Boemong ba naha voltaglerotholi | 0.3 VDC @ 25 ℃
0.5 VDC @ 60 ℃ |
| Mots. jwale | Min. 1 mA |
| Off-state leakage current | Max. 5A |
| Ho lieha ho tsoa | TIMA ho ON: Max. 0.3 ms
HO TSEBA: Max 0.5 ms |
| Lintlha tse hlahisoang hajoale | Max. 0.3 A mocha ka mong / Max. 6.0 A yuniti ka 'ngoe |
| Tshireletso | Ho feta tekanyo ea hajoale: Min. 6.5 A @ 25 ℃ ka kanale Ho tima ha mocheso: Min 4 A @ 25 ℃ mocha ka mong
Tšireletso e khutšoanyane ea potoloho |
| Mofuta o tloaelehileng | Lintlha tse 32 / 8 COM |
Setšoantšo sa Wiring
| Tšoaea no. | Tlhaloso ea lets'oao |
| 1 | Kanale ea tlhahiso 0 |
| 2 | Kanale ea tlhahiso 1 |
| 3 | Kanale ea tlhahiso 2 |
| 4 | Kanale ea tlhahiso 3 |
| 5 | Kanale ea tlhahiso 4 |
| 6 | Kanale ea tlhahiso 5 |
| 7 | Kanale ea tlhahiso 6 |
| 8 | Kanale ea tlhahiso 7 |
| 9 | Kanale ea tlhahiso 8 |
| 10 | Kanale ea tlhahiso 9 |
| 11 | Kanale ea tlhahiso 10 |
| 12 | Kanale ea tlhahiso 11 |
| 13 | Kanale ea tlhahiso 12 |
| 14 | Kanale ea tlhahiso 13 |
| 15 | Kanale ea tlhahiso 14 |
| 16 | Kanale ea tlhahiso 15 |
| 17 | Tloaelehileng (Matla a Tšimo 0 V) |
| 18 | Tloaelehileng (Matla a Tšimo 0 V) |
| 19 | Tloaelehileng (Matla a Tšimo 24 V) |
| 20 | Tloaelehileng (Matla a Tšimo 24 V) |
| 21 | Kanale ea tlhahiso 16 |
| 22 | Kanale ea tlhahiso 17 |
| 23 | Kanale ea tlhahiso 18 |
| 24 | Kanale ea tlhahiso 19 |
| 25 | Kanale ea tlhahiso 20 |
| 26 | Kanale ea tlhahiso 21 |
| 27 | Kanale ea tlhahiso 22 |
| 28 | Kanale ea tlhahiso 23 |
| 29 | Kanale ea tlhahiso 24 |
| 30 | Kanale ea tlhahiso 25 |
| 31 | Kanale ea tlhahiso 26 |
| 32 | Kanale ea tlhahiso 27 |
| 33 | Kanale ea tlhahiso 28 |
| 34 | Kanale ea tlhahiso 29 |
| 35 | Kanale ea tlhahiso 30 |
| 36 | Kanale ea tlhahiso 31 |
| 37 | Tloaelehileng (Matla a Tšimo 0 V) |
| 38 | Tloaelehileng (Matla a Tšimo 0 V) |
| 39 | Tloaelehileng (Matla a Tšimo 24 V) |
| 40 | Tloaelehileng (Matla a Tšimo 24 V) |
Letšoao la LED
| Nomoro ea LED. | LED mosebetsi / tlhaloso | Mmala oa LED |
| 0 | OUTPUT kanale 0 | Botala |
| 1 | OUTPUT kanale 1 | Botala |
| 2 | OUTPUT kanale 2 | Botala |
| 3 | OUTPUT kanale 3 | Botala |
| 4 | OUTPUT kanale 4 | Botala |
| 5 | OUTPUT kanale 5 | Botala |
| 6 | OUTPUT kanale 6 | Botala |
| 7 | OUTPUT kanale 7 | Botala |
| 8 | OUTPUT kanale 8 | Botala |
| 9 | OUTPUT kanale 9 | Botala |
| 10 | OUTPUT kanale 10 | Botala |
| 11 | OUTPUT kanale 11 | Botala |
| 12 | OUTPUT kanale 12 | Botala |
| 13 | OUTPUT kanale 13 | Botala |
| … | … | … |
| 31 | OUTPUT kanale 31 | Botala |
Boemo ba Channel
| Boemo | LED | E supa |
| Letshwao la tima | E tima | Ha ho lets'oao la tlhahiso |
| Ka pontsho | Botala | Ts'ebetso e tloaelehileng |
Ho 'mapa Lintlha ka Boleng ba Litšoantšo
Boleng ba setšoantšo se hlahisoang
| Nonyana e nyane. | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| Byte 0 | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
| Byte 1 | D15 | D14 | D13 | D12 | D11 | D10 | D9 | D8 |
| Byte 2 | D23 | D22 | D21 | D20 | D19 | D18 | D17 | D16 |
| Byte 3 | D31 | D30 | D29 | D28 | D27 | D26 | D25 | D24 |
Lintlha tsa Mojule oa Output
| D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
| D15 | D14 | D13 | D12 | D11 | D10 | D9 | D8 |
| D23 | D22 | D21 | D20 | D19 | D18 | D17 | D16 |
| D31 | D30 | D29 | D28 | D27 | D26 | D25 | D24 |
8. Lintlha tsa Parameter
E nepahetse parameter length: 8 Bytes
| Nonyana e nyane. | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| Byte 0 | Ketso ea phoso (ch0-ch7)
0: Boleng ba phoso, 1: Tšoara boemo ba ho qetela |
|||||||
| Byte 1 | Ketso ea phoso (ch8-ch15)
0: Boleng ba phoso, 1: Tšoara boemo ba ho qetela |
|||||||
| Byte 2 | Ketso ea phoso (ch16-ch23)
0: Boleng ba phoso, 1: Tšoara boemo ba ho qetela |
|||||||
| Byte 3 | Ketso ea phoso (ch24-ch31)
0: Boleng ba phoso, 1: Tšoara boemo ba ho qetela |
|||||||
| Byte 4 | Boleng ba phoso (ch0-ch7)
0: E timme, 1: Bulela |
|||||||
| Byte 5 | Boleng ba phoso (ch8-ch15)
0: E timme, 1: Bulela |
|||||||
| Byte 6 | Boleng ba phoso (ch16-ch23)
0: E timme, 1: Bulela |
|||||||
| Byte 7 | Boleng ba phoso (ch24-ch31)
0: E timme, 1: Bulela |
|||||||
Ho hlophisoa ha Hardware
TLHOKOMELO
- Bala khaolo ena kamehla pele o kenya module!
- Sebaka se chesang! Bokaholimo ba ntlo bo ka chesa nakong ea ts'ebetso. Haeba sesebelisoa se sebelisoa mochesong o phahameng oa tikoloho, kamehla tlohela sesebelisoa hore se phomole pele u se tšoara.
- Ho sebetsa ka lisebelisoa tse matlafalitsoeng ho ka senya thepa! Kamehla tima motlakase pele o sebetsa sesebelisoa.
Litlhoko tsa Sebaka
Litšoantšo tse latelang li bontša litlhoko tsa sebaka ha u kenya li-module tsa G-Series. Sekheo se theha sebaka sa moea, 'me se thibela tšitiso ea motlakase ho susumetsa ts'ebetso. Boemo ba ho kenya bo nepahetse bo otlolohile ebile bo rapame. Litšoantšo li na le litšoantšo 'me li ka 'na tsa se ke tsa lekana.
TLHOKOMELO
HO SE latele ditlhoko tsa sebaka ho ka baka ho senya sehlahisoa.
Mount Module ho DIN Rail
Likhaolo tse latelang li hlalosa mokhoa oa ho kenya mojule seporong sa DIN.
TLHOKOMELO
Mojule o tlameha ho ts'oaroa ho seporo sa DIN ka lithapo tsa ho notlela.
Thaba ea GL-9XXX kapa GT-XXXX Module
Litaelo tse latelang li sebetsa mefuteng ena ea li-module:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Li-module tsa GN-9XXX li na le lisebelisoa tse tharo tsa ho notlela, e 'ngoe e le ka tlase le tse peli ka lehlakoreng. Bakeng sa litaelo tsa ho holisa, sheba Mount GN-9XXX Module.
Thaba to DIN rail
Theoha from DIN rail
Thaba ea GN-9XXX Module
Ho kenya kapa ho theola adaptara ea netweke kapa mojule oa IO o ka sebelisoang ka lebitso la sehlahisoa GN-9XXX, bakeng sa mohlala.ample GN-9251 kapa GN-9371, bona litaelo tse latelang:
Matla a Tšimo le Lithako tsa Lintlha
Puisano pakeng tsa adapter ea marang-rang ea G-Series le module ea ho atolosa, hammoho le tsamaiso / tšimo ea motlakase ea li-modules tsa libese e etsoa ka bese ea ka hare. E na le 2 Field Power Pins le 6 Data Pins.
TLHOKOMELO
Se ke oa ama lintlha le lithakhisa tsa matla a tšimo! Ho ama ho ka fella ka ho silafatsoa le ho senyeha ka lerata la ESD.
| Tšoaea no. | Lebitso | Tlhaloso |
| P1 | Sistimi ea VCC | Phepelo ea sistimi voltage (5 VDC) |
| P2 | Sistimi ea GND | Sebaka sa tsamaiso |
| P3 | Sephetho sa token | Boema-kepe ba token ea module ea processor |
| P4 | Tlhahiso ea serial | Transmitter port port ea module ea processor |
| P5 | Tlhahiso ea serial | Boema-kepe ba ho amohela mojule oa processor |
| P6 | Reserved | E boloketsoe token ea bypass |
| P7 | Tšimong GND | Sebaka sa tšimo |
| P8 | Sebaka sa VCC | Phepelo ea masimong voltage (24 VDC) |
LBH
- P: Ke lokela ho etsa eng haeba mojule o sa arabe?
A: Check the power supply, connections, and ensure proper setup within the G-series System. - P: Na nka sebelisa mojule ona ka voltagke tse ling ntle le 24 VDC?
A: Ho khothaletsoa ho sebelisa molumo o boletsoengtage bakeng sa ts'ebetso e nepahetseng le polokeho.
Litokomane / Lisebelisoa
 |
Beijer Electronics GT-22CA Digital Output Module [pdf] Bukana ea Mosebelisi GT-22CA, GT-22CA Digital Output Module, GT-22CA, Digital Output Module, Output Module, Mojule |