Beat Sonic CS10B Front Camera Selector

Rea leboha ha u rekile Sekhetho sa Khamera ea Beat-Sonic CS10B. U rekile ho tsoa ho morekisi ea ka sehloohong oa Japane oa li-adapter le lisebelisoa tsa molumo oa koloi. E entsoe le ho etsoa Japane, sehlahisoa sena se emela boitlamo ba rona ba boleng le bokhabane. Ka kopo bala bukana ena ka hloko pele o kenya sehlahisoa sena ho netefatsa ts'ebetso e nepahetseng.

Likaroloana

• E fana ka khokahano ea ho kenya kh'amera e ka pele ea 'maraka ho skrineng sa feme
• Konopo ea ho khetha ho kenya kh'amera e ka pele ts'ebetsong e nang le nako e hlophisehileng ea nako
• Khamera ea "backup" ea fektheri e ka kengoa ts'ebetsong ka nako efe kapa efe ntle le ho kenya lisebelisoa tsa morao-rao
• E khona ho hlahisa kh'amera e ka pele ka lebelo la ho paka
• E entsoe Japane

Bohlokoa

• Sehlahisoa sena se kenngoa ho sebelisoa lihokelo tsa marapo a fektheri, leha ho le joalo ho na le likhokahano tse ngata tsa lifeme tse lekanang ka boholo le sebopeho. Se ke oa hokela sehokelong se fosahetseng kapa ho ka baka tšenyo e tebileng. Ikopanye le Beat-Sonic haeba o sa tiisehe.
• Sheba Beat-Sonic websaete bakeng sa lintlha tsa morao-rao tsa tšebetso ea koloi pele e kenya.
• Likoloi tse nang le lisebelisoa tsa tsamaiso ea fektheri li ka ba le tahlehelo ea nakoana ea GPS ho nepahala ha koloi, 'me maemong a mang koloi e ka bonahala eka e ea morao 'mapeng ha khamera e ka pele e ntse e sebetsa.
• Sehlahisoa sena se hloka hore ho kenngoe k'hamera e ka pele e nang le likhoele ho feta har'a firewall ea koloi. Sehlahisoa sena se lokela ho kenngoa ke setsebi sa likoloi se nang le phihlelo.
• Mosebedisi o jara boikarabelo bohle bakeng sa tshenyeho efe kapa efe le/kapa dikgobalo tse bakilweng ke ho kenngwa ka tsela e fosahetseng.

Mehato ya tlhokomelo

• Etsa ho kenya ka mamello le tlhokomelo ho thibela tšenyo ea sehlahisoa sena kapa koloi.
• Netefatsa hore likhokahano tsohle, lithapo le litheminale li sirelelitsoe ka nepo 'me li kentsoe ka botlalo. Lihokelo tse hlephileng le/kapa tse sirelelitsoeng ka nepo li tla baka ho se sebetse hantle.
• Kamehla tšoara plug ea sehokelo ha u hakolla lehare la thapo. Le ka mohla u se ke ua hakolla likhokahanyo ka ho hula lithapo tsa marapo kaha tšenyo e kholo e ka hlaha.
• Beat-Sonic le balekane ba eona ba ke ke ba jara boikarabello bakeng sa litlamorao life kapa life, ebang ke ka kotloloho kapa ho seng joalo, ka lebaka la ho kenya le/kapa ho sebelisa sehlahisoa sena.
• Hokela "negative terminal" ea betri ea koloi pele e kenngoa ho thibela kotsi ea nako e khuts'oane.

Litaba

• Interface module x 1
• Boleng x 1
• Konopo ea ho khetha x 1
• Fetola li-adapter tse se nang letho x 3
• Buka ea litaelo x 1
• Khamera e ka pele ha e kenyelelitsoe - ka kopo, reka ka thoko

Setšoantšo sa Khokahano

Ho kenya

1. Tlosa likarolo tsohle tse hlokahalang ho fumana karolo e ka morao ea hlooho ea fektheri. Mokhoa oa ho qhaqha o fapana bakeng sa koloi ka 'ngoe. Haeba o sa tiisehe, ka kopo ikopanye le Beat-Sonic bakeng sa likeletso bakeng sa litaelo tse tobileng tsa koloi.
2. Viewha o thehile yuniti ea hlooho ho tloha ka morao, khaola sehokelo se ka ho le letšehali sa lipini tse 28 le sehokelo se bohareng sa lipini tse 30 ho tloha ka morao ho yuniti ea hlooho ea feme. Hokela lihokelo tsa lithapo tse tsamaellanang le lihokelo tsa feme ka har'a tlhophiso ea ketane ea daisy (sheba karolo ea 1).
3. Fumana sekheo se loketseng se se nang letho se lumellanang le e 'ngoe ea li-adapter tse 3 tse fanoeng. Tlosa sekheo se se nang letho ebe u kenya adaptara e se nang letho. Kenya sehokelo sa li-pin tse 3 bakeng sa konopo ea khetho ka adaptara e se nang letho ebe u e hokahanya le mojule oa CS.
4. Kenya khamera e ka pele (e rekisoang ka thoko) ho latela litaelo tse fanoeng le khamera. Hokela kh'amera e ka pele ho kenyelletso ea FRONT CAM mojuleng oa CS.
5. Netefatsa hore dihokelo tsohle di hoketswe hape pele o hokela botjha theminale e fosahetseng ya betri. Kopanya e-brake ka tieo 'me u netefatse hore kh'amera ea "backup" ea fektheri e bonts'oa ha ho khethoa lisebelisoa tse khutlisetsang morao. Ha sekhetho sa lisebelisoa se tsoa morao, tobetsa konopo ea ho khetha ho kenya khamera e ka pele tšebetsong. Netefatsa LED e tala e benyang konopo ea sekhetho ha khamera e ka pele e ntse e hlahisoa. Ka mor'a metsotsoana e 15. pontsho e tla kgutlela pontshong e tlwaelehileng (di-setting tsa kamehla).
6. Hlophisa li-fasteners le liphanele tsohle ka tatellano e ka morao ea disassembly ho phethela ho kenya.

Tshebetso

Khetho ea Pontšo ea Khamera - Litlhophiso tsa kamehla (Mokhoa oa PTV o lumelletsoe)

• Tobetsa Konopo ea ho Khetha ho hlahisa khamera e ka pele. Khamera e ka pele e tla tima kamora metsotsoana e 15 ebe e khutlela ponts'ong e tloaelehileng.
• Ho tobetsa Konopo ea Khetho hape pele metsotsoana e 15 e feta ho tla hlahisa kh'amera ea bekapo. Khamera ea "backup" e ka hlahisoa ka nako efe kapa efe ntle le ho khetha lisebelisoa tse khutlisang morao. Khamera ea bekapo e tla tima ka mor'a metsotsoana e 15 ebe e khutlela ponts'ong e tloaelehileng.
• Ho tobetsa Konopo ea Khetho 3rd pele metsotsoana e 15 e feta ho tla khutlela ponts'ong e tloaelehileng.

Ho fetohela ka morao ho tla bonts'a kh'amera ea "backup" mme e tlose skrineng sa khamera e ka pele haeba e khethiloe hajoale. Ha o suthela morao, skrine e tla khutlela ponts'ong e tloaelehileng ho sa tsotelehe hore na kh'amera e ka pele e ne e khethiloe pele (litlhophiso tsa kamehla feela).

Khetho ea Pontšo ea Khamera - Litlhophiso tsa kamehla (Mokhoa oa PTV o lumelletsoe)

• Khamera e ka pele e ka hlophisoa hore e iponahatse ka lebelo le tlase ho thusa ho paka. Sheba li-setting tse lokisehang tsa ho bulela Khamera e ka Pele.
• Nako ea ponts'o ea khamera (ea kamehla metsotsoana e 15) e ka fetoloa ho sebelisoa li-setting tsa mananeo a Khamera Display Timer.
• 2nd tobetsa "backup camera" mokhoa oa PTV (ke hore viewing ea kh'amera ea "backup" ntle le ho khetha lisebelisoa tsa reverse) e ka koaloa ho sebelisoa "Bakaup Camera PTV" li-setting tse ka khonehang.

Litlhophiso tsa Programmable

Mokhoa oa ho Kena Lenaneong la Lenaneo
Tobetsa 'me u tšoare Konopo ea Selector ebe o tima ho tima ho tloha ho OFF ho ​​ea ho ACC.

• Ho boloka konopo e ntse e tsoela pele bonyane metsotsoana e 4. empa eseng ho feta 10 sec. e tla etsa hore LED e fetohe ho tloha OFF -> Flashing. Lokolla konopo ha LED e ntse e Benya ho kenya mokhoa oa ho bulela Camera Auto Turn-On.
• Ho boloka konopo e ntse e tsoela pele bonyane metsotsoana e 10. empa eseng ho feta 15 sec. e tla fella ka hore LED e fetohe ho tloha OFF -> Flashing -> ON. Lokolla konopo ha LED e butse ho kenya mokhoa oa ho etsa lenaneo la Camera Display Timer.
• Ho boloka konopo e ntse e hatelloa nako e fetang metsotsoana e 15 ho tla etsa hore LED e fetohe ho tloha OFF -> Flashing -> ON -> Rapid Flashing. Lokolla konopo ha LED e ntse e le Rapid Flashing ho kenya mokhoa oa ho etsa mananeo a Backup Camera PTV.

Tobetsa Konopo ea Sekhethi 'me U Tšoare Nako	Boemo ba LED	Mokhoa oa Lenaneo
0 ~ 4 metsotsoana.	TLOA	Ha ho Phello
4 ~ 10 metsotsoana.	Ho panya	Ho Bulela Khamera e ka Pele
10 ~ 15 metsotsoana.	ON	Nako ea Pontšo ea Khamera
Ho feta 15 sec.	Ho Benya ka potlako	bekapo Khamera PTV

Ka mor'a ho kenya mokhoa oa ho etsa lenaneo, LED e tla panya ho bontša khetho ea hona joale ea litlhophiso. Ho tobetsa konopo ea Selector nako le nako ho tla potoloha likhethong. Kamora ho khetha tlhophiso eo u e batlang, tobetsa 'me u tšoare konopo bonyane metsotsoana e 3. ho tsoa ho mokhoa oa ho etsa mananeo. Ho tima mollo ntle le ho tobetsa le ho tšoara konopo bonyane metsotsoana e 3. ho tsoa ho mokhoa oa ho etsa mananeo ho tla etsa hore sesebelisoa se khutlele ho setting ea sona ea pele.

Ho Bulela Khamera e ka Pele

Ka lebelo le tlase ka tlase ho 15km/h (10mph), kh'amera e ka pele e ka hlahisoa ka bo eona.

1. Tobetsa 'me u tšoare Konopo ea Selector ebe o tima ho tima ho tloha ho OFF ho ​​ea ho ACC
2. Boloka konopo e tepeletse bonyane 4 sec. ho bona phetoho ea LED ho tloha OFF -> Ho khanya
3. Lokolla konopo ho kenya mokhoa oa ho etsa mananeo a Front Camera Auto Open
4. Tobetsa le ho lokolla konopo ho fetola tlhophiso. LED e tla benya habeli ka potoloho ho bontša hore khetho ena e entsoe. Tobetsa 'me u lokolle konopo hape 'me LED e tla benya hang ka potoloho ho bontša hore khetho ena e koetsoe.
   

   Leseli la LED	Ho Bulela Khamera e ka Pele
   Flash	E emisitsoe (setting ea kamehla)
   2 Ho benya	E lumelletsoe

5. Kamora ho khetha tlhophiso eo o e batlang, tobetsa o hatelle Konopo ea Khetha bonyane metsotsoana e 3. ho tsoa ho mokhoa oa ho etsa mananeo.
6. Ho bulela Khamera e ka Pele ho Bulela Kakaretso ho ka etsa hore kh'amera e ka pele e hlahe hakhuts'oanyane ha khatello e buletsoe.

Nako ea Pontšo ea Khamera
E beha nako ea hore kh'amera e ka pele le kh'amera ea bekapo e bontšoe ha Konopo ea Khethang e tobetsoa. Basebelisi ba ka boela ba tima sebali sa nako bakeng sa ts'ebetso ea push on / push off feela.

1. Tobetsa 'me u tšoare Konopo ea Selector ebe o tima ho tima ho tloha ho OFF ho ​​ea ho ACC
2. Boloka switch e tepeletse bonyane metsotsoana e 10. empa eseng ho feta 15 sec. ho bona phetoho ea LED ho tloha Off -> Flashing -> ON
3. Tlosa konopo ho kenya mokhoa oa ho etsa lenaneo la Nako ea Pontšo ea Khamera
4. Tobetsa le ho lokolla konopo ho potoloha e 'ngoe le e 'ngoe ea li-setting tse 5 tsa nako. LED e tla benya ho bonts'a tlhophiso ea nako ea hajoale joalo ka ha ho bonts'itsoe tafoleng e ka tlase:
   

   LED Khanya	Sebala nako Nako
   Flash	5 metsotsoana.
   2 Ho benya	10 metsotsoana.
   3 Ho benya	15 metsotsoana. (setting ea kamehla)
   4 Ho benya	20 metsotsoana.
   5 Ho benya	Nako e holofetse (tobetsa / sutumelletsa ho tima)

5. Kamora ho khetha tlhophiso eo o e batlang, tobetsa o hatelle Konopo ea Khetha bonyane metsotsoana e 3. ho tsoa ho mokhoa oa ho etsa mananeo.
6. Ho tlosa lisebelisoa tse ka morao ka kh'amera e ka pele kapa ea bekapo e khethiloeng hajoale:
   1. Ha bobeli ba Nako ea Nako e koetsoe 'me Khamera e ka Pele ea Auto Auto e tingoa, ponts'o e tla khutlela ho kh'amera e khethiloeng pele. view ha phetoho ea gear e tlosoa ka morao.
   2. Ha Nako ea Nako e sa tingoa, ponts'o e tla khutlela skrineng se tloaelehileng ha sesebelisoa se tlositsoe ka morao ho sa tsotelehe khetho ea khamera e fetileng.

bekapo Khamera PTV
E hlahisa kh'amera ea bekapo ka nako efe kapa efe ntle le tlhoko ea ho khetha lisebelisoa tse khutlisang morao. Backup Camera PTV mode e ka tima e le hore ho tobetsa Konopo ea Khethang lekhetlo la bobeli ho ka khutlela skrineng se tloaelehileng. Khamera e bolokang bekapo e tla lula e hlaha ha ho khethoa lisebelisoa tse ka morao ho sa tsotelehe hore na PTV ea bekapo ea khamera e butsoitse kapa e koetsoe.

1. Tobetsa o hatelle Konopo ea ho Khetha ebe o tima ho tima ho tloha ho TIMA ho ea ho ACC
2. Boloka konopo e tepeletse bonyane metsotsoana e 15 ho bona phetoho ea LED ho tloha ho Off -> Flashing -> ON -> Rapid Flashing
3. Lokolla konopo ho kenya mokhoa oa ho etsa mananeo a bekapo Khamera ea PTV
4. Tobetsa ebe o lokolla konopo ho fetola tlhophiso. LED e tla benya hang ka potoloho ho bontša hore khetho ena e koetsoe. Tobetsa le ho lokolla konopo hape 'me LED e tla benya habeli ka potoloho ho bontša hore khetho ena e entsoe.

LED Khanya	Boloka Khamera PTV
Flash	E holofetse
2 Ho benya	E lumelletsoe (setting ea kamehla)

Litlhophiso tsa kamehla - bekapo ea khamera PTV e nolofalitsoe

Litlhophiso tsa boikhethelo - Backup Camera PTV E holofetse

Ntlo-kholo
Beat-Sonic JAPANE
472-5 Koushin, Fujieda, Nisshin, Aichi, 470-0112, JAPAN
TEL: +81-561-75-1655 FAX: +81-561-74-5595
www.beatsonicglobal.com lengolo-tsoibila: lipotso@beatsonicglobal.com

USA le Canada
Sehlopha sa Beat-Sonic USA Inc.
14778 Beach Blvd. La Mirada, CA 90638
TEL: 1-714-994-1085 FAX: 1-714-249-4741
www.beatsonicusa.com lengolo-tsoibila: info@beatsonicusa.com

Litokelo tsa matšoao a khoebo, li-logo, mabitso a khoebo joalo-joalo, ke tsa beng ba tsona. Sheba ho Beat-Sonic websaete bakeng sa lintlha.

FAQS

P: A na nka sebelisa kh'amera e ka pele ea 'maraka ka sehlahisoa see?

A: E, u ka sebelisa k'hamera efe kapa efe e ka pele ea "market" e nang le Camera Selector ha feela e lumellana le koloi ea hau.

P: Nka kenya kh'amera e ka pele joang ntle le ho kenya lisebelisoa tsa morao?

K: Tobetsa konopo ea ho khetha ho kenya kh'amera e ka pele ka nako efe kapa efe ntle le ho sebelisa lisebelisoa tse kgutlelang morao.

Litokomane / Lisebelisoa

Beat Sonic CS10B Front Camera Selector [pdf] Tlhophiso Tataiso CS10B, CS10B Sekhethi sa Khamera e ka Pele, CS10B, Sekhethi sa Khamera e ka Pele, Sekhethi sa Khamera, Sekhethi

Litšupiso

• Bukana ea Mosebelisi