Batocera GPi Case le Raspberry

Kenya lisebelisoa tsa Matla le Likonopo ho Raspberry ea hau

Ho boloka theko e tlase, boto ea Raspberry Pi ha e tsamaee ka konopo ea matla, leha ho le joalo ho bonolo ho eketsa ea hau! Tataiso ena e tla u bonts'a mokhoa oa ho kenya konopo ea matla ho Raspberry Pi ea hau e ka bulelang / tima sistimi ea hau ea BATOCERA.

Haeba u sa batle ho iketsetsa, likhetho tse 'maloa tse tsebahalang tsa khoebo lia fumaneha. Ba tla kenya sesebelisoa sa motlakase ho Raspberry Pu ea hau, ka linako tse ling ba fane ka fan e laolang mocheso ... 'me ba kenye ponahalo ea setaele ho boto ea hau.

• Liphetoho tsa Matla a Khoebo
  • mrovide ho fokotsa matla a 'nete
  • Litsenyehelo li haufi le 10-25 USD
  • Hangata e hloka sebaka se itseng ho e haha
• Likonopo tse bonolo kapa li-switches tsa latching
  • Ho seta ho bonolo haholo
  • Theko e tlase
  • Ha ho khonehe ho seha motlakase

Hobaneng ha konopo ea matla ea Raspberry Pi e le bohlokoa?
Ha ua lokela ho "hlakola" thapo ea matla ho Pi ea hau kaha sena se ka lebisa bobolung bo matla ba data ('me maemong a mang, ho senya karete ea hau ea SD). Leha Batocera e lokiselitsoe hantle khahlano le bobolu ba lifaele ho khothaletsoa ho koala Pi ea hau ka mokhoa o sireletsehileng ka Batocera's Shutdown Menu kapa ho feta, sebelisa konopo ea matla kapa switjha.

Ha Batocera "e koala" Pi ka konopo e bonolo / latching switch, e tla e romela sebakeng sa ho emisa, se ntseng se sebelisa matla a fokolang haholo. Sena se tšoana le kamoo lik'homphieutha tsohle tsa morao-rao li sebetsang kateng. Tataisong ena re tla ema feela e le hore re tle re tsebe ho e kenya hape hamorao ntle le ho kenya mohloli oa matla hape. U ka khaola motlakase ka mokhoa o sireletsehileng (ha u ka lakatsa) ntle le ho tšoenyeha ka bobolu ba data ha u ntse u eme.

Mokhoa ona o fana ka boiphihlelo bo botle ka ho fetesisa ha o sebelisa GPi-case ho tsoa ho Retroflag bakeng sa example. Ntlo ena e ntle e na le konopo e le 'ngoe feela ea ho bulela / tima Raspberry. Ho tloha ha Batocera 5.25 OS e lokiselitsoe hamolemo bakeng sa mefuta eohle ea lisebelisoa tsa matla tse amanang le Raspberry. Empa u tla lahleheloa ke papali ea hau ea SRM (faele ea hau ea ho boloka papaling) ha feela u ka kenya konopo ea matla ka har'a seshene sa papali.

Boloka tshireletso ya data

1. Khoasolla mongolo o fanoeng ka tlase
2. Boloka sena ho /userdata/system
3. Beha karolo e sebetsang ka chmod +x /userdata/system/custom.sh
4. Seta sesebelisoa sa hau sa matla ho latela lintlha tse ling tse ka tlase

tloaelo.sh

Liphetoho tsa Matla a Khoebo

Mona ke tse ling tsa li-switches tsa motlakase / linyeoe tsa khoebo tse nang le li-switches tsa motlakase tse tšehetsoeng hajoale. Tsena li fana ka matla a 'nete, ho bolelang hore Raspberry e hlile e tingoe. Hangata lisebelisoa tsena tse nyane tsa matla li hokeloa ka holim'a Raspberry ho sebelisoa hlooho ea eona ea 40 Pin. Bakeng sa litaelo tse ling tsa ho kenya, sebelisa lihokelo tse fanoeng.
Mona ke litekanyetso tseo u ka li behang e le system.power.switch= ho batocera.conf:

Lebitso la Sesebelisoa	tsamaiso.matla.switch	Moo u ka rekang le boitsebiso bo eketsehileng ba moetsi	Lintlha tse amanang le Batocera
Argon One bakeng sa RPi4	ARGONONE	https://www.argon40.com/argon-one-raspberry-pi-4-case.html	Fumana lintlha tse ling mona
ATXRaspi	ATX_RASPI_R2_6	http://lowpowerlab.com/atxraspi/#installation
Nyeoe ea DeskPi Pro	DESKPIPRO	https://deskpi.com/collections/frontpage/products/deskpi-pro-for-raspberry-pi-4
Lipotoloho tsa Mausberry	MAUSBERRY	http://mausberry-circuits.myshopify.com/pages/setup
msldigital PiBoard r2013	REMOTEPIBOARD_2003	http://www.msldigital.com/pages/support-for-remotepi-board-2013
msldigital PiBoard r2015	REMOTEPIBOARD_2005	http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
OneNineDesign Powerhat	MATLATSA	https://github.com/redoakcanyon/HATPowerBoard
Pimoroni OnO�Shim	ONOFFSHIM	https://shop.pimoroni.com/products/onoff-shim
UUGear Witty Pi	WITTYPI	http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi	Script e sebelisa WiringPi.
Linyeoe tsa retroflag	RETROFLAG	http://www.retroflag.com	MOCHA NESPi4 tšehetso!

Lebitso la Sesebelisoa	tsamaiso.matla.switch	Moo u ka rekang le boitsebiso bo eketsehileng ba moetsi	Lintlha tse amanang le Batocera
Retroflag kesi ka likonopo	RETROFLAG_ADV	http://www.retroflag.com	E ts'oanang le e fetileng, ntle le hore konopo e ka tsosa liketso, joalo ka ho emisa liemulators
Retroflag GPIO case	RETROFLAG_GPI	https://www.retroflag.com/GPi-CASE.html	Fumana lintlha tse ling mona.
Kintaro Super Kuma/Roshambo Retro Gaming case	KINTARO	https://www.amazon.com/dp/B079T7RDLX/?tag=electromake-20 / https://www.electromaker.io/blog/article/roshambo-retro-gaming-case-review

Konopo e bonolo kapa li-switches

Hoa khonahala ho kenya konopo ho bulela le ho tima khomphutha ea hau ea Batocera hantle! Empa joang?

Ke GPIO PIN efe eo ke lokelang ho e sebelisa?
U ka kenya konopo ea matla ho bulela/off Batocera. Konopo e ka ba konopo ea push (konopo ea nakoana) kapa konopo ea switch (latching switch). Tlhokomeliso ho li-buttons tsa push: GPIO e 'ngoe e na le li-resistors tse hulang holimo (li-resistors tse amanang le + 3.3V), kahoo ho molemo ho sebelisa li-switches tse atisang ho buloa (e khutsufalitsoeng NO) ka lithapo tsena.

ho hokela switch ho Raspberry Pi GPIO, hokela PIN ho GPIO3 (PIN ea 'mele 5 kaholimo ka letsohong le letšehali) le e' ngoe ka boima e ka ho le letona ka ho le letona (PIN 6 ea 'mele)

Ketso ya ho switjha

GUI Menu Mokhoa
Fumana fensetere ea ho qetela ka ho tlohela EmulationStation ka Keyboard kapa fumana mokhoa oa ho fihlella terminal ka SSH. Joale kenya /etc/init.d/S92switch setup 'me u tla bona fensetere ea terminal joalo ka setšoantšong se ka tlase. Ho tloha moo o ka khetha le ho kenya matla a hau kapa oa switjha sesebelisoa. Sengoloa se tla u bontša sesebelisoa se seng se ntse se kentsoe (ONOFFSHIM tabeng ena) 'me hamorao se tla u bontša lebokose le lenyenyane la molaetsa, haeba setupo sa boleng se thehiloe ka katleho. Ka mor'a hore sesebelisoa se qale hape, ntho e 'ngoe le e' ngoe e lokela ho sebetsa hantle.

Ho kenya letsoho ka letsoho
Sheba tafoleng e ka holimo hore na ke mofuta ofe oa sesebelisoa sa motlakase oo u o hlokang.
Ebe, hlophisa faele ea config /userdata/system/batocera.conf - ho ex.ample ka tlase le PIN56ONOFF.

• Bakeng sa sesebelisoa sa latching, fetola batocera.conf ka mongolo oo u o ratang 'me u kenye system.power.switch=PIN56ONOFF
• Qala sistimi hape
• Ntle le moo, haeba u sa batle ho hlophisa faele 'me u kene ka SSH kapa u na le terminal e bulehileng joale kena:

batocera-settings-set system.power.switch PIN56ONOFF ebe o qala hape. Sistimi ea hau ea Batocera joale e ka buloa/ea tima ka konopo!

Retroflag
Retroflag ke moetsi ea shebaneng le nyeoe ea retro bakeng sa letoto la Raspberry Pi le bakeng sa tšimoloho e shebahalang e le balaoli ba lipapali tsa retro. Lilemong tse fetileng ba khonne ho tlisa matlo a matle 'marakeng. Tsena li bululetsoe ke lisebelisoa tsa papali ho tloha mehleng ea khauta ea li-consoles tsa lipapali. Haeba u le mong'a motlotlo oa GPicase, sheba mona. Ntle le ponahalo e ntle kamehla ho na le likonopo tse sebetsang bakeng sa matla le / kapa ho seta bocha ho khoneha. Empa u tlameha ho nka mehato e seng mekae moo.

1. Nolofaletsa Safe Shutdown Switch ho PCB! Phetoho ena e nyane e ipapisitse le ntlo e sebelisitsoeng, sheba bukana e rometsoeng ho tsoa ho Retroflag mokhoa oa ho etsa sena.
2. Fetola batocera.conf ebe u seta mokhoa o nepahetseng oa switjha.
   • U ka hlophisa faele ea config ho tsoa ho SAMBA share le mohlophisi oa hau oa mongolo o inehetseng
   • kapa sebelisa SSH 'me u ka hlophisa faele ea config ka nano/userdata/system/batocera.conf
   • kapa sebelisa mokhoa oa GUI, o hloka SSH bakeng sa mokhoa ona, hape.
3. Kenya tshebetsong kapa Khetha e nepahetseng powerswitch system.power.switch=RETROFLAG
4. Qala hape, sena se tla kenya ts'ebetso ea Safe Shutdown

Bakeng sa nyeoe ea NESPi 4 feela
U tlameha ho qala bocha hape! Ts'oarelo, banna, empa re hloka ho itlhophisa ka morao ho liketsahalo!

Hape, bakeng sa nyeoe ea NESPi4, u ka ba le botsoa ho sebelisa "cartridge" ea HDD/SSD. Mona ke sehokelo sa Reddit se u fang mokhoa oa ho se lokisa (leha poso ea reddit e ngotsoe bakeng sa RetroPie, e tlalehiloe e le OK ho Batocera le eona).

Argon One
Kenya tšebetsong fan ea Argon One ka ho eketsa system.power.switch=ARGONONE faeleng ea tlhophiso batocera.conf.
Ka tloaelo, fan e qala ho likhato tse 55 tsa Celsius. U ka hlalosa mocheso oa hau / lebelo la fan ka ho hlophisa faele /userdata/system/configs/argonone.conf (e ka hlophisoa hape ho tsoa marang-rang, ka foldara ea SHARE SMB).

55=10
60=55
65=100

Ka lere ena, fan e qala ho 10% ha e fihla likhatong tse 55, 'me e nyolohela ho 100% ha e fihla ho likhato tse 65 tsa Celsius. Ho tsoa ho likhothaletso tsa barekisi, ho bolokehile ho qala fan ka likhato tse 55 feela. Lerata le fokolang. 😉

Ho tsoa ho:
https://wiki.batocera.org/ – Batocera.linux – Wiki

Khokahano e sa feleng:
https://wiki.batocera.org/add_powerdevices_rpi_only?rev=1633139243
Nchafatso ea ho qetela: 2021/10/02 03:47

https://wiki.batocera.org/

Litokomane / Lisebelisoa

Batocera GPi Case le Raspberry [pdf] Litaelo Taba ea GPi le Raspberry, Nyeoe le Raspberry, Raspberry

Litšupiso

• Bukana ea Mosebelisi