BAPI 49799 Wireless Duct Temperature Sensor

Tlhahisoleseding ya Sehlahiswa

Wireless Duct Temperature Sensor ke sesebelisoa se etselitsoeng ho lekola le ho fetisa data ea mocheso ho tsoa likotopong. E na le li-setting tse fetolehang le memori ea onboard. Sensor e ka fetisetsa data ho Gateway ea dijithale kapa ho Receiver ea wireless-to-analog.

Sensor e tsamaisana le lisebelisoa tse se nang mohala tsa BAPI 'me e ka fetoloa tšimong ho lumellana le litlhoko tsa ho kenya. Litlhophiso tsohle li ka hlophisoa ho sebelisoa heke kapa moamoheli. Bakeng sa tlhaiso-leseling e batsi mabapi le ho lokisa litlhophiso, sheba litaelo tsa heke kapa tsa moamoheli tse fumanehang ho BAPI websebaka.

Associated Receiver kapa Gateway

Moamoheli (O se na Wire-to-Analog): Moamoheli oa waelese o fumana data ho tsoa ho sensor e le 'ngoe kapa ho feta tse se nang mohala. E fetisetsa data ho li-module tsa analog ebe e e fetolela ho analoge voltage kapa khanyetso. Moamoheli o tšehetsa li-sensor tse fihlang ho tse 32 le li-module tse fapaneng tse 127 tsa tlhahiso ea analog.

Gateway: Mohala o se nang mohala o fumana data ho tsoa ho sensor e le 'ngoe kapa ho feta tse se nang mohala. E fana ka lintlha ho leru ka MQTT mme e romela letšoao la tiiso ho sensor e 'ngoe le e' ngoe ha e amoheloa ka katleho ea data. Heke e tšehetsa li-sensor tse ka bang 32.

Ho theha puisano lipakeng tsa lisensara le heke kapa moamoheli, sheba tataiso ea BAPI ea Wireless Quick Start Guide kapa litaelo tsa heke/moamoheli ho BAPI. websebaka.

Tšebeliso ea pele

Lisebelisoa tsa Battery Power: Yuniti e tla le libeteri tse peli tse kentsoeng pele. Ho kenya yuniti, latela mehato ena:

1. Bula sekoaelo ho fumana libeteri.
2. Tlosa li-insulator tsa thebo ea betri.
3. Tobetsa konopo ea Tšebeletso, 'me LED ea Tšebeletso e lokela ho bonesa hang ho netefatsa matla.

Motlakase oa Motlakase: Ho kenya yuniti, latela mehato ena:

1. Bula sekoahelo ho fihlella boto ea potoloho.
2. Kenya 9 ho isa ho 30 VDC kapa 24 VAC ho litheminale tsa motlakase joalo ka ha ho bonts'itsoe.
3. Tobetsa konopo ea Tšebeletso, 'me LED ea Tšebeletso e lokela ho bonesa hang ho netefatsa matla.

Ho phahamisa

Ho fumana 'malo o motle oa mocheso, latela mehato ena ea ho kenya sensor:

1. Beha sensor bohareng ba kotopo, hole le moea oa stratified oa mocheso, li-coil kapa humidifiers.
2. Epa lesoba la probe joalo ka ha ho bonts'itsoe ho Setšoantšo sa 3. Sebelisa li-tab tse koaletsoeng ho tšoaea libaka tsa masoba le ho phunya li-pilothole tse 1/8 (3.2mm).
3. Beha sebaka se koaletsoeng kotopong u sebelisa li-mountingscrews tse fanoeng.
4. Tiisa li-screws ho fihlela foam e tšehetsang e tepeletse hanyenyane ho thibela moea o lutla.

Hlokomela: Se ke oa phunya ka har'a sebaka se kampetsoeng, kaha sena se tla tlola tekanyetso ea NEMA le IP.

Litaelo tsa Tšebeliso ea Sehlahisoa

Tshebetso

Matlafatsa yuniti joalo ka ha ho hlalositsoe karolong ea "Qalo ea Ts'ebetso". Latela litaelo tsa heke kapa tsa moamoheli bakeng sa ho lokisa yuniti le ho fetola li-setting tse fetolehang. (Litaelo li fumaneha ho BAPI websebaka.)

1. Matlafatsa yuniti joalo ka ha ho hlalositsoe karolong ea Qalo ea Ts'ebetso.

2. Latela heke kapa litaelo tsa moamoheli bakeng sa ho para yuniti le ho fetola li-setting tse feto-fetohang. Sheba litaelo tse fumanehang ho BAPI websebaka.

3. Ho tobetsa konopo ea Tšebeletso letlapeng la potoloho ho tla qobella phetiso.

Fetileview le Boitsebiso

• Litlhophiso tse ka fetolehang tsa mosebelisi
• Khopotso e kahare
• E fetisetsoa ho Dijithale Gateway kapa ho Receiver ea waelese ho ea ho analoge

BAPI's Duct Wireless Sensor e lekanya thempereichara ebe e fetisetsa data ka Bluetooth Low Energy ho moamoheli kapa keiting. Yuniti ena e na le sebaka se kampetsoeng sa BAPI-Box se matsaranka se lekantsoeng ka IP66 le probe ea tšepe e sa jeleng ¼” (6.4mm) e nang le bolelele bo tloaelehileng ho tloha ho 4” ho isa ho 18” (102 ho isa ho 457mm).

Litlhophiso tse Fetohang

Lisebelisoa tse se nang mohala tsa BAPI li na le litlhophiso tse 'maloa tse ka fetoloang hore li lumellane le litlhoko tsa ho kenya. Litlhophiso tsohle li hlophisitsoe ke heke kapa moamoheli. (Sheba litokomane tsa litaelo tsa heke kapa tsa moamoheli tse fumanehang ho BAPI websaete bakeng sa tlhaiso-leseling e batsi mabapi le ho lokisa li-setting.)

• Sample Rate/Interval – Nako e lipakeng tsa ha sensor e tsoha ebe e nka ho bala. Maemo a teng ke metsotsoana e 10, metsotsoana e 30, metsotsoana e 1, metsotsoana e 3 kapa metsotsoana e 5 ka heke, kapa metsotsoana e 30, metsotsoana e 1, metsotso e 3 kapa metsotso e 5 le moamoheli.
• Sekhahla sa Phetiso / Nako - Nako e lipakeng tsa ha sensor e fetisetsa lipalo ho heke kapa moamoheli. Maemo a fumanehang ke metsotsoana e 30, 1, 2, 3, 4, 5, 10, 15, 20 kapa 30 metsotso, kapa 1, 6 kapa 12 lihora tse le heke, kapa 1, 5, 10 kapa 30 metsotso le moamoheli.
• Delta Temperature - Phetoho ea mocheso pakeng tsa sample linako tse tla etsa hore sensor e fetele nako ea phetisetso ebe e fetisetsa mocheso o fetotsoeng nakong e tlang.ample karohano. Maemo a teng ke 0.1, 0.2, 0.3, 0.4, 0.5, 1, 2, 3, 4, 5 °F kapa °C le heke, le 1 kapa 3 °F kapa °C le moamoheli.
• Temperature Min / Max - Mocheso o phahameng kapa o fokolang o tla etsa hore sensor e fetele nako ea phetisetso mme hang-hang e fetise ho bala hekeng. (E fumaneha feela ha o sebelisa heke.) Thempereichara Offset - E fetola boleng ba mocheso o fetisoang hore o lumellane le oa sesebelisoa se lekantsoeng sa litšupiso. Maemo a teng ke ±0.1, 0.2, 0.5, 1, 2, 3, 4 kapa 5 °F kapa °C. (E fumaneha feela ha o sebelisa heke.)

Associated Receiver kapa Gateway

RECEIVER (Waelese-to-Analog)
Moamoheli ea se nang mohala o tsoang ho BAPI o fumana data ho tsoa ho sensor e le 'ngoe kapa ho feta tse se nang mohala. Lintlha li fetisetsoa ho li-module tsa tlhahiso ea analoge ebe li fetoloa ho analog voltage kapa khanyetso. Moamoheli o tšehetsa li-sensor tse fihlang ho tse 32 le li-module tse fapaneng tse 127 tsa tlhahiso ea analog.

MOKHOKO
Khoro e se nang mohala e tsoang ho BAPI e amohela data ho tsoa ho sensor e le 'ngoe kapa ho feta tse se nang mohala. Thegateway ebe e fana ka data ho leru ka MQTT. Heke e boetse e romela lets'oao la netefatso ho sensor e 'ngoe le e' ngoe ha u amohela data ka katleho. Heke e tšehetsa li-sensor tse ka bang 32.

Ka kopo, sheba Tataiso ea ho Qala ka Waele e Se nang Wireless ea BAPI, kapa litokomane tsa litaelo tsa heke kapa tsa moamoheli tse fumanehang ho BAPI websebaka sa ho theha puisano pakeng tsa disensara le kgoro kapa moamoheli

Tšebeliso ea pele

Lisebelisoa tsa Battery Power
Yuniti e tla le libeteri tse peli tse kentsoeng pele. Ho kenya yuniti tshebetsong, bula sekwahelo ho fihlella dibetri. Fumana li-tabinsulators tsa betri 'me u li hule. Tobetsa konopo ea Tšebeletso 'me LED ea Tšebeletso e lokela ho bonesa hang ho netefatsa matla.

Lisebelisoa tsa Motlakase oa Mohala
Ho kenya yuniti tshebetsong, bula sekwahelo ho fihlella boto ya potoloho mme o kenye VDC 9 ho isa ho 30 kapa 24 VAC ho ditheminale tsa motlakase jwalo ka ha ho bontshitswe. Tobetsa konopo ea Tšebeletso 'me LED ea Tšebeletso e lokela ho bonesa hang ho netefatsa matla

Wireless Sensor Reset

Li-sensor li lula li kopane le heke kapa li-module tsa moamoheli le tse tsoang ha motlakase o sitisoa kapa libeteri li tlosoa. Ho senya maqhama pakeng tsa bona, li-sensor li hloka ho tsosolosoa. Ho etsa sena, tobetsa konopo ea "Service" ho sensor ka metsotsoana e ka bang 30. Nakong ea metsotsoana eo e 30, LED e tala e tla tima metsotsoana e ka bang 5, ebe e benya butle, ebe e qala ho benya ka potlako. Ha khanya e potlakileng e emisa, reset e felile. Sensor e se e ka kopanngoa le mochine o mocha kapa heke. Ho lokisa botjha ho seamohedi kapa heke e le nngwe, o tlameha ho seta seamohedi botjha kapa heke. Li-module tse hlahisoang tse neng li kopantsoe pele ho sensor ha li hloke ho kopanngoa hape

Khopotso e kahare

Sensor e boloka ho bala ho fihla ho 16,000 haeba puisano e ka sitisoa. Sensor e boloka feela ho baloa ha li-transmissions tse fetotsoeng mme feela ha sensor e kopantsoe le heke. Hang ha puisano e se e thehiloe hape le heke, lipalo tse bolokiloeng li fetisoa ebe li hlakoloa ho sensor. Palo ea hajoale le lipalo tse robong tse fetileng li romelloa ka nako e 'ngoe le e' ngoe ea phetisetso ho fihlela sensor e ts'oaroa.

Phetoho ea Battery

Bula sekoahelo ho fihlella libeteri (setšoantšo sa 6). Tlosa libeteri ho litšepe tsa tsona 'me u li lahle ka mokhoa o sireletsehileng tikolohong. Fetola ka libeteri tse ncha ka mokhoa o nepahetseng.

Litlhaloso tsa Battery:

• Libetri tse peli tsa 3.6V Lithium:
• (#14505, 14500 kapa e lekanang)

Diagnostics

Mathata a ka bang teng:
Sensor ha e hokahane le heke kapa moamoheli, kapa boleng bo fetisoang bo fosahetse.

Litharollo tse ka khonehang:

• Etsa bonnete ba hore sensor e ka har'a sebaka sa heke kapa moamoheli.
• Netefatsa hore LED e tala ka boto ea potoloho ea sensor e khanyetsa ha konopo ea "Tšebeletso" e hatelloa, e bontšang phetisetso. Haeba e sa bonese, fetola libeteri.
• Netefatsa hore sensor e kopantsoe hantle le heke kapa moamoheli le li-module tsa analog joalo ka ha ho hlalositsoe ho heke kapa litaelo tsa moamoheli tse fumanehang ho BAPI. websebaka. Li lokise hape ha ho hlokahala. Haeba ho hlokahala, etsa mokhoa oa "Wireless Sensor Reset" joalo ka ha ho hlalositsoe leqepheng la 3.

Litlhaloso

• Matla a Battery: Tse peli li kenyelelitse 3.6V 14505, 14500 kapa libeteri tsa lithium tse lekanang (Hlokomela: Libetri tse tloaelehileng tsa AA ha li tsamaisane)
• Matla a Wire: 9 ho 30 VDC kapa 24 VAC, halofo ea wave e lokisitsoe
• Ho Nepaha ha Sensor ea Mocheso: ±1.0°F (0.55°C) ho tloha ho 32 ho isa ho 158°F (0 ho isa ho 70°C)
• Boemo ba Mocheso: -4 ho isa ho 221°F (-20 ho isa ho 105°C)
• Sebaka sa Phetiso: E fapana ho latela ts'ebeliso*
• Sebaka sa Ts'ebetso ea Tikoloho:
  • Mocheso: -4 ho isa ho 149°F (-20 ho isa ho 65°C)
  • Mongobo: 10 ho isa ho 90% RH, e sa fokotseng
  • Tekanyetso ea Sebaka, Boitsebiso le Boitsebiso:
  • IP66, UV-Resistant Polycarbonate, UL94 V-0
  • Khafetsa: 2.4 GHz (Bluetooth Low Energy)
  • Sensitivity ea Moamoheli: -97 dBm
• Litlhophiso tse Fetohang tsa Mosebelisi:
  • Delta T (Temp): 0.1°F/C ho ya ho 5.0°F/C
  • Nako ea ho tsamaisa: metsotsoana e 30 ho isa ho lihora tse 12
  • SampLe karohano: 10 sec ho 5 min
  • Thepa ea Nako: ±0.1°F/C ho isa ho ±5.0°F/C
• Memori ea Onboard:
  • Sensor e boloka ho bala ho fihla ho 16,000 haeba puisano e ka sitisoa. Haeba o sebelisa Gateway, data e fetisoa hape hang ha puisano e se e thehiloe. Mokhatlo: RoHS
    *Mehaho ea kaho e itšetlehile ka litšitiso tse kang thepa ea ka tlung le mabota le ho teteana ha thepa eo. Libakeng tse pharaletseng tse bulehileng, sebaka se ka ba seholoanyane; libakeng tse teteaneng, sebaka se ka fokotseha.
    **Bophelo ba betri ba nnete bo ipapisitse le litlhophiso tse feto-fetohang tsa sensor le maemo a tikoloho.

Litlhaloso li ka fetoha ntle le tsebiso.

Building Automation Products, Inc.,

• 750 North Royal Avenue, Gays Mills, WI 54631 USA
• Mohala:+1-608-735-4800
• Fax+1-608-735-4804
• E-mail:sales@bapihvac.com
• Web:www.bapihvac.com

Litokomane / Lisebelisoa

	BAPI 49799 Wireless Duct Temperature Sensor [pdf] Buka ea Taelo 49799 Wireless Duct Temperature Sensor, 49799, Wireless Duct Temperature Sensor, Duct Temperature Sensor, Sensor ea Mocheso, Sensor
	BAPI 49799 Wireless Duct Temperature Sensor [pdf] Buka ea Taelo 49799 Wireless Duct Temperature Sensor, 49799, Wireless Duct Temperature Sensor, Duct Temperature Sensor, Sensor ea Mocheso, Sensor

Litšupiso

• Bukana ea Mosebelisi