BAPI 49733 Bukana ea Taelo ea Sensor ea Mocheso e se nang Wireless
Fetileview le Boitsebiso
Sensora ea mocheso ea ho qoelisoa ka waelese
- Litlhophiso tse ka fetolehang tsa mosebelisi
- Khopotso e kahare
- E fetisetsoa ho Dijithale Gateway kapa ho Receiver ea wireless-toanalog
BAPI's Immersion Wireless Sensor e lekanya mocheso le ho fetisetsa lintlha ka Bluetooth Low Energy ho moamoheli kapa keiting. Yuniti ena e na le sebaka se kampetsoeng sa BAPI-Box se hahelletsoeng ka IP66 le probe ea tšepe e sa jeleng ¼" (6.4mm) e nang le bolelele bo tloaelehileng ho tloha ho 2" ho isa ho 8" (51 ho isa ho 203mm).
Litlhophiso tse Fetohang
Lisebelisoa tse se nang mohala tsa BAPI li na le litlhophiso tse 'maloa tse ka fetoloang hore li lumellane le litlhoko tsa ho kenya. Litlhophiso tsohle li hlophisitsoe ke heke kapa moamoheli. (Sheba litokomane tsa litaelo tsa heke kapa tsa moamoheli tse fumanehang ho BAPI websaete bakeng sa tlhaiso-leseling e batsi mabapi le ho lokisa li-setting.)
Sample Rate/Karohano - Nako pakeng tsa ha sensor e tsoha ebe e bala. Maemo a teng ke metsotsoana e 10, metsotsoana e 30, metsotsoana e 1, metsotsoana e 3 kapa metsotsoana e 5 ka heke, kapa metsotsoana e 30, metsotsoana e 1, metsotso e 3 kapa metsotso e 5 le moamoheli.
Sekhahla sa Phetiso / Khao - Nako e pakeng tsa ha sensor e fetisetsa lipalo ho heke kapa moamoheli. Maemo a fumanehang ke metsotsoana e 30, 1, 2, 3, 4, 5, 10, 15, 20 kapa 30 metsotso, kapa 1, 6 kapa 12 lihora tse le heke, kapa 1, 5, 10 kapa 30 metsotso le moamoheli.
Mocheso oa Delta - Ho fetoha ha mocheso pakeng tsa sample linako tse tla etsa hore kutlo e
tlola nako ea phetisetso mme o fetise mocheso o fetotsoeng ka metsotsoana e latelangample karohano. Maemo a teng ke 0.1, 0.2, 0.3, 0.4, 0.5, 1, 2, 3, 4, 5 °F kapa °C le heke, le 1 kapa 3 °F kapa °C le moamoheli.
Thempereichara Min/Max - Mocheso o phahameng kapa o fokolang o tla etsa hore sensor e fetele nako ea phetisetso mme hang-hang e fetise ho bala hekeng. (E fumaneha feela ha o sebelisa heke.)
Mocheso Offset - E fetola boleng ba mocheso o fetisoang hore o lumellane le oa sesebelisoa se lekantsoeng sa litšupiso. Maemo a teng ke ±0.1, 0.2, 0.5, 1, 2, 3, 4 kapa 5 °F kapa °C. (E fumaneha feela ha o sebelisa heke.)
Associated Receiver kapa Gateway
RECEIVER (Waelese-to-Analog)
Moamoheli ea se nang mohala o tsoang ho BAPI o fumana data ho tsoa ho sensor e le 'ngoe kapa ho feta tse se nang mohala. Lintlha li fetisetsoa ho li-module tsa tlhahiso ea analoge ebe li fetoloa ho analog voltage kapa khanyetso. Moamoheli o tšehetsa li-sensor tse fihlang ho tse 32 le li-module tse fapaneng tse 127 tsa tlhahiso ea analog.
MOKHOKO
Khoro e se nang mohala e tsoang ho BAPI e amohela data ho tsoa ho sensor e le 'ngoe kapa ho feta tse se nang mohala. Joale heke e fana ka data ho leru ka MQTT. Heke e boetse e romela lets'oao la netefatso ho sensor e 'ngoe le e' ngoe ha u amohela data ka katleho. Heke e tšehetsa li-sensor tse ka bang 32.
Ka kopo, sheba Tataiso ea ho Qala ka Waele e Se nang Wireless ea BAPI, kapa litokomane tsa litaelo tsa heke kapa tsa moamoheli tse fumanehang ho BAPI websebaka sa ho theha puisano pakeng tsa disensara le kgoro kapa moamoheli.
Tšebeliso ea pele
Lisebelisoa tsa Battery Power
Yuniti e tla le libeteri tse peli tse kentsoeng pele. Ho kenya yuniti tshebetsong, bula sekwahelo ho fihlella dibetri. Fumana li-insulator tsa betri ebe u li hula. Tobetsa konopo ea Tšebeletso 'me LED ea Tšebeletso e lokela ho bonesa hang ho netefatsa matla.
Setšoantšo sa 1: Setsi sa Matla a Battery
Lisebelisoa tsa Motlakase oa Mohala
Ho kenya yuniti tshebetsong, bula sekwahelo ho fihlella boto ya potoloho mme o kenye VDC 9 ho isa ho 30 kapa 24 VAC ho ditheminale tsa motlakase jwalo ka ha ho bontshitswe. Tobetsa konopo ea Tšebeletso 'me LED ea Tšebeletso e lokela ho bonesa hang ho netefatsa matla.
Setšoantšo sa 2: Motlakase oa Motlakase
Li-Thermowell le li-Sensors tsa ho qoelisoa
Lisebelisoa tsa ho qoelisa li etselitsoe hore li kenngoe ka har'a thermowell. Li-thermowell tse tloaelehileng tse tsoang BAPI li kenyelletsa tšepe e sa hloekang ea 304 le 316 le koporo, le likarolo tse peli tse cheselitsoeng ka tšepe ea 304. Thermowell e khethiloeng bakeng sa ho kenya e laoloa haholo-holo ke maemo a ho bola a tla tobana le seliba. Ka linako tse ling, ho nahanisisa ka lintho tse bonahalang ke tsa matla ho e-na le ho senya. Bakeng sa mohlalaample, seliba sa tšepe e sa hloekang se entsoeng ka mochine se ka 'na sa hlokoa bakeng sa tšebeletso ea metsi a khatello e phahameng moo ho seng joalo seliba sa koporo kapa likarolo tse peli tsa tšepe e sa hloekang se ka khotsofatsang ho latela pono ea ho senya. Li-thermowell tse nang le likarolo tse peli tse cheselitsoeng ka tšepe ha li reretsoe ho sebelisoa metsing a tsamaeang. Se ke oa beha li-thermowell tse likarolo tse peli haufi le phaephe e kenang kapa ea ho tsoa ea tanka.
Setšoantšo sa 5 se bontša "thermowell" e tloaelehileng ea lisenthimithara tse 'nè le probe ea ho qoelisa ea lisenthimithara tse' nè e kentsoeng phala ea li-inch tse robeli.
Setšoantšo sa 3: Thermowell e entsoeng ka mochine
Setšoantšo sa 4: Thermowell e entsoeng ka likarolo tse peli
Setšoantšo sa 5: Sensor e Tloaelehileng le Thermowell Installation
Ho kenngoa ha sensor ea ho qoelisoa
Lisebelisoa tsa ho qoelisa li tla ka polasetiki e kenang ka har'a likhoele tse kaholimo ho thermowell. Hula probe hole le polasetiki ho fihlela probe e atolosoa ka botlalo. Kenya mochine oa ho qoelisa ka har'a thermowell ho fihlela lisebelisoa tsa polasetiki li kopana le likhoele tse ka har'a thermowell. Ka letsoho tiisa sensor ea ho qoelisoa hantle ka har'a thermowell ntle le torque e ngata haholo. Yuniti e etselitsoe hore mocheso oa mocheso o theohele ka har'a sekoahelo ha sensor e hokahana le tlase ho thermowell. Etsa bonnete ba hore ntlha ea sensor ea ho qoelisa e amana hantle le tlase ea thermowell ka ho sutumelletsa pheletsong e benyang ea probe ho fihlela ntlha e tsoa ka har'a thermowell.
Setšoantšo sa 6: Sehlopha sa BAPI-Lebokose Pele ho Kenoa
Setšoantšo sa 7: Sehlopha sa BAPI-Lebokose se Kentsoe
Ho kenya liphaephe tse ka tlase ho 3" ka Diameter
T- Thaba
Setšoantšo sa 8 se bontša kamoo 2 "Tee le 1/2" ho 2" bushing e lumellang "2" thermowell ho lekanya mocheso oa lintho tse ka hare ho phala ea metsi ea 2". Etsa bonnete ba hore o sebelisa sealant ea khoele holim'a likhoele tse ka ntle tsa thermowell. Thaba e hukung
Setšoantšo sa 9 se bontša kamoo peipi ea Tee e ka sebelisoang ho kenya setsoe. Tee ea 2" le "1/2" ho isa ho 2" bushing e lumella 4" thermowell ho lekanya mocheso oa lintho tse ka hare ho phala ea metsi ea 2".
Hlokomela: Mocheso oa liphaephe tse nyane joalo ka 1-1/4" o ka lekanyetsoa ka mokhoa ona. Liphaepheng tse nyenyane, bophara ba thermowell bo ka 'na ba e-ba tšitiso e kholo, kahoo etsa bonnete ba hore u hlahloba litekanyetso tse nepahetseng tsa phallo ka mor'a hore ho behoe ho phethoe.
Setšoantšo sa 8: T-Mount e Tloaelehileng
Setšoantšo sa 9: Thaba e Tloaelehileng ea Huku
Tshebetso
Matlafatsa yuniti joalo ka ha ho hlalositsoe karolong ea "Qalo ea Ts'ebetso". Latela litaelo tsa heke kapa tsa moamoheli bakeng sa ho para yuniti le ho fetola li-setting tse fetolehang. (Litaelo li fumaneha ho BAPI websebaka.)
Setšoantšo sa 10: Setsi sa Matla a Battery
Setšoantšo sa 11: Motlakase oa Motlakase
Wireless Sensor Reset
Li-sensor li lula li kopane le heke kapa li-module tsa moamoheli le tse tsoang ha motlakase o sitisoa kapa libeteri li tlosoa. Ho senya maqhama pakeng tsa bona, li-sensor li hloka ho tsosolosoa. Ho etsa sena, tobetsa konopo ea "Service" ho sensor ka metsotsoana e ka bang 30. Nakong ea metsotsoana eo e 30, LED e tala e tla tima metsotsoana e ka bang 5, ebe e benya butle, ebe e qala ho benya ka potlako. Ha khanya e potlakileng e emisa, reset e felile. Sensor e se e ka kopanngoa le moamoheli e mocha kapa heke. Ho lokisa botjha ho seamohedi kapa heke e le nngwe, o tlameha ho seta seamohedi botjha kapa heke. Li-module tse hlahisoang tse neng li kopantsoe pele ho sensor ha li hloke ho kopanngoa hape.
Khopotso e kahare
Sensor e boloka ho bala ho fihla ho 16,000 haeba puisano e ka sitisoa. Sensor e boloka feela ho baloa ha li-transmissions tse fetotsoeng mme feela ha sensor e kopantsoe le heke. Hang ha puisano e se e thehiloe hape le heke, lipalo tse bolokiloeng li fetisoa ebe li hlakoloa ho sensor. Palo ea hajoale le lipalo tse robong tse fetileng li romelloa ka nako e 'ngoe le e' ngoe ea phetisetso ho fihlela sensor e ts'oaroa.
Phetoho ea Battery
Bula sekoahelo ho fihlella libeteri (setšoantšo sa 6). Tlosa libeteri ho litšepe tsa tsona 'me u li lahle ka mokhoa o sireletsehileng tikolohong. Fetola ka libeteri tse ncha ka mokhoa o nepahetseng.
Litlhaloso tsa Battery:
Libetri tse peli tsa 3.6V Lithium:
(#14505, 14500 kapa e lekanang)
Diagnostics
Mathata a ka bang teng:
Sensor ha e hokahane le heke kapa moamoheli, kapa boleng bo fetisoang bo fosahetse.
Litharollo tse ka khonehang:
Etsa bonnete ba hore sensor e ka har'a sebaka sa heke kapa moamoheli. Netefatsa hore LED e tala ka boto ea potoloho ea sensor e khanyetsa ha konopo ea "Tšebeletso" e hatelloa, e bontšang phetisetso. Haeba e sa bonese, fetola libeteri.
Netefatsa hore sensor e kopantsoe hantle le heke kapa moamoheli le li-module tsa analog joalo ka ha ho hlalositsoe ho heke kapa litaelo tsa moamoheli tse fumanehang ho BAPI. websebaka. Li lokise hape ha ho hlokahala. Haeba ho hlokahala, etsa mokhoa oa "Wireless Sensor Reset" joalo ka ha ho hlalositsoe leqepheng la 3.
Litlhaloso
- Matla a Battery: Tse peli li ne li kenyelletsa 3.6V 14505, 14500 kapa libeteri tsa lithium tse lekanang
(Hlokomela: Libetri tse tloaelehileng tsa AA ha li tsamaisane) - Matla a Mohala: 9 ho 30 VDC kapa 24 VAC, halofo ea wave e lokisoe
- Ho Nepaha ha Sensora ea Mocheso: ±1.0°F (0.55°C) ho tloha ho 32 ho isa ho 158°F (0 ho isa ho 70°C)
- Boemo ba Mocheso: -4 ho isa ho 221°F (-20 ho isa ho 105°C)
- Sebaka sa Phetiso: E fapana ho latela ts'ebeliso*
- Sebaka sa Ts'ebetso ea Tikoloho:
- Boima: -4 ho isa ho 149°F (-20 ho isa ho 65°C)
- Mongobo: 10 ho isa ho 90% RH, e sa fokotseng
- Tekanyetso ea Sebaka, Boitsebiso le Boitsebiso: IP66, UV-Resistant Polycarbonate, UL94 V-0
- Hangata: 2.4 GHz (Bluetooth Low Energy)
- Boikutlo ba ho Receiver: -97 dBm
- Litlhophiso tse Fetohang tsa Mosebelisi:
- Delta T (Temp): 0.1°F/C ho isa ho 5.0°F/C
- Nako ea ho fetisa: 30 metsotsoana ho 12 hora
- Sample Interval: Metsotsoana e 10 ho isa ho metsotsoana e 5
- Temp Offset: ±0.1°F/C ho isa ho ±5.0°F/C
- Memori ea Onboard: Sensor e boloka ho bala ho fihla ho 16,000 haeba puisano e ka sitisoa. Haeba o sebelisa Gateway, data e fetisoa hape hang ha puisano e se e thehiloe hape.
- Setsi: RoHS
Mehaho ea kaho e itšetlehile ka litšitiso tse kang thepa ea ka tlung le mabota le ho teteana ha thepa eo. Libakeng tse pharaletseng tse bulehileng, sebaka se ka ba seholoanyane; libakeng tse teteaneng, sebaka se ka 'na sa fokotseha.
Bophelo ba betri ba sebele bo itšetlehile ka litlhophiso tse feto-fetohang tsa sensor le maemo a tikoloho.
| Bophelo ba Betri bo Baliloeng** | ||
| Nako ea ho fetisa | Sample Rate | Khakanyo ea Bophelo (lilemo) |
| 30 metsotsoana | 30 metsotsoana | 1.04 |
| 1 mets | 1 mets | 1.95 |
| 3 mets | 1 mets | 3.46 |
| 5 mets | 5 mets | 4.63 |
| 10 mets | 5 mets | 7.02 |
Litlhaloso li ka fetoha ntle le tsebiso.
Ts'ehetso ea Bareki
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Mohala:+1-608-735-4800
Fax+1-608-735-4804
E-mail: sales@bapihvac.com
Web: www.bapihvac.com
Litokomane / Lisebelisoa
 |
BAPI 49733 Wireless Immersion Temperature Sensor [pdf] Buka ea Taelo 49733, 49733 Wireless Immersion Temperature Sensor, Sensor ea Tempersion Temperature e senang Wireless, Sensor ea Mocheso oa ho qoelisoa, Sensor ea mocheso, Sensor |
