B METERS iSMA-B-4I40-H-IP Mojule o Nang le Modbus TCP/IP E Hahiloe Ka har'a Keiti ea Modbus
Tlhahisoleseding ya Sehlahiswa
- Mohlala: iSMA-B-4I4O-H-IP
- Moetsi: B METHA UK
- Websebaka: www.bmetersuk.com
Litlhaloso
- 4x e omileng ea ho kopanya, k'hamera ea lebelo le phahameng ea ho fihla ho 100 Hz
- 4x tlhahiso ea relay
- Boholo ba Lintlha:
- Mojaro o Hanyetsang: 3 A @ 230 V AC, 3 A @ 30 V DC
- Moroalo o Inductive: 75 VA @ 230 V AC, 30 W @ 30 V DC
- Sehokelo: RS485 half-duplex (Modbus RTU/ASCII), Ethernet (Modbus TCP/IP kapa BACnet/IP)
- Tekanyo ea Ts'ireletso ea Ingress: IP40 (bakeng sa ho kenya ka tlung)
Litaelo tsa Tšebeliso ea Sehlahisoa
Phepelo ea motlakase
Netefatsa hore phepelo ea motlakase e kopana le lintlha tse hlokahalang (low voltage AC/DC 24V phepelo, ekaba SELV kapa PELV).
Lisebelisoa tsa Dijithale
Sesebelisoa se ts'ehetsa lisebelisoa tse 4 tse omeletseng tse nang le k'hamera e phahameng ea lebelo ho fihla ho 100 Hz. Kopanya lisebelisoa tsa digital ka nepo.
Digital Outputs
Sesebelisoa se na le liphetho tse 4 tsa li-relay tse loketseng ho hokahanya meroalo e hanyetsanang le ea inductive ka har'a litekanyetso tse boletsoeng.
Puisano
Sebelisa sebopeho sa RS485 kapa Ethernet bakeng sa puisano, ho latela litlhoko tsa sistimi ea hau (Modbus RTU/ASCII kapa Modbus TCP/IP/BACnet/IP).
Ho phahamisa
Kenya sesebelisoa ka mokhoa o sireletsehileng sebakeng se lakatsehang ho latela litataiso tse fanoeng ho netefatsa ts'ebetso e nepahetseng.
Thepa ea Matlo
Thepa ea matlo e etselitsoe ho mamella lisebelisoa tsa kahare. Etsa bonnete ba hore tikoloho e kopana le maemo a boletsoeng bakeng sa ts'ebetso e nepahetseng.
LBH
- P: Ke lokela ho etsa eng haeba sesebelisoa se sa sebetse?
K: Lekola likhokahano tsa phepelo ea motlakase 'me u netefatse hore li fihlela litlhoko tse boletsoeng. Haeba bothata bo ntse bo tsoela pele, ikopanye le tšehetso ea bareki bakeng sa thuso. - P: A na nka hokela lisebelisoa tse ngata marang-rang ke sebelisa sebopeho sa RS485?
A: E, sebopeho sa RS485 se lumella khokahanyo ea lisebelisoa tse ka bang 128 beseng. Etsa bonnete ba hore ho sebetsanoa ka nepo le tlhophiso bakeng sa puisano e se nang moeli.
TS'ELISO
| Phepelo ea motlakase | DC: 24 V ± 20%, 2.2 W; AC: 24 V ± 20%, 3.3 VA | ||
| Lisebelisoa tsa dijithale | 4x e omileng ea ho kopanya, k'hamera ea lebelo le phahameng ea ho fihla ho 100 Hz | ||
| Liphetho tsa dijithale | 4x tlhahiso ea relay | Lintlha tse ka holimo | Lintlha tse lumellanang le UL |
| Mojaro o hanyetsanang le boholo. | 3 A @ 230 V AC
3 A @ 30 V DC |
3 A @ 24 V AC
3 A @ 30 V DC |
|
| Inductive load max. | 75 VA @ 230 V AC
30 W @ 30 V DC |
8 VA @ 24 V AC
30 W @ 30 V DC |
|
| Sehokedi | RS485 half-duplex: Modbus RTU/ASCII, ho fihlela lisebelisoa tse 128 ka bese
Ethernet: Modbus TCP/IP kapa BACnet/IP |
||
| Aterese | Beha ka ho fapanyetsana ho tloha ho 0 ho isa ho 99 | ||
| sekhahla sa bolutu | Beha ka switjha ho tloha ho 4800 ho isa ho 115200 bps | ||
| Tekanyo ea ts'ireletso ea Ingress | IP40 - bakeng sa ho kenya ka hare ho ntlo | ||
| Mocheso | E sebetsa: -10°C ho ea +50°C (14°F ho isa ho 122°F)
Sesebelisoa: -40 ° C ho + 85 ° C (-40 ° F ho isa ho 185 ° F) |
||
| Mongobo o amanang | 5 ho 95% RH (ntle le condensation) | ||
| Lihokelo | E arohanngoa, boholo ba 2.5 mm2 (18 – 12 AWG) | ||
| Boemo | 37x110x62 mm (1.45 × 4.33 × 2.44 ho) | ||
| Ho phahamisa | Ho kenya seporo sa DIN (DIN EN 50022 tloaelo) | ||
| Thepa ea matlo | Plastiki, PC / ABS e itimang | ||
SEKONYELA SEHLOHO
LIEKETSO / LIPHETHO
LIEKETSENG TS'IANE
LIPHOLO TSA DITITSELE
TS'ELISO
PHEPELO EA MOTLAKASE
TLHOKOMELO
- Hlokomela, mohala o fosahetseng oa sehlahisoa sena o ka o senya mme oa lebisa likotsing tse ling. Netefatsa hore sehlahisoa se kentsoe ka nepo pele o bulela motlakase.
- Pele o kenya marang-rang, kapa o tlosa / o kenya sehlahisoa, etsa bonnete ba hore o tima motlakase. Ho hloleha ho etsa joalo ho ka baka ts'okelo ea motlakase.
- Se ke oa tšoara likarolo tsa motlakase tse kang litheminale tsa motlakase. Ho etsa joalo ho ka baka ts'oaetso ea motlakase.
- U se ke ua qhaqha sehlahisoa. Ho etsa joalo ho ka baka ts'ebetso ea motlakase kapa ts'ebetso e fosahetseng.
- Sebelisa sehlahisoa ka har'a mekhahlelo ea ts'ebetso e khothalelitsoeng ho latela maemo (mocheso, mongobo, voltage, ts'oenyeho, tsela e holimang, sepakapaka jj.). Ho hloleha ho etsa joalo ho ka baka mollo kapa ts'ebetso e fosahetseng.
- Ka tieo tiisa lithapo ho terminal. Ho se tiise lithapo tse lekaneng ho ka baka mollo.
LITŠOANTŠISO TŠEBELE
TS'ELISO EA PHEKO EA MATLA EN 60730-1
- Tšireletseho ea motlakase meahong ea meaho le lits'ebetso tsa taolo e ipapisitse le ts'ebeliso ea matla a tlasetage e arohaneng ka thata ho tloha ho mains voltage. Molumo ona o tlasetage ke SELV kapa PELV ho latela EN 60730-1.
- Tšireletso khahlanong le ts'oaetso ea motlakase e tiisetsoa ka mehato e latelang:
- moeli oa voltage (tlase voltagphepelo ea e AC/DC 24V, ekaba SELV kapa PELV)
- Karohano e sireletsang ea sistimi ea SELV ho lipotoloho tsohle ntle le SELV le PELV
- karohano e bonolo ea SELV-system ho tloha ho tse ling tsa SELV-system, ho tloha ho PELV-systems le lefats'e
- Lisebelisoa tsa masimong joalo ka li-sensor, mabitso a maemo le li-actuator tse hokahantsoeng le low-voltagLitlhahiso le liphetho tsa li-module tsa I/O li tlameha ho lumellana le litlhoko tsa SELV kapa PELV. Mahokelo a lisebelisoa tsa masimong le litsamaiso tse ling le tsona li tlameha ho khotsofatsa litlhoko tsa SELV kapa PELV.
- Ha phepelo ea li-circuits tsa SELV kapa PELV e fumaneha ho tsoa ho liphatlalatso tsa motlakase tse phahamengtage tla fanoa ka transformer ea polokeho kapa converter e etselitsoeng ts'ebetso e tsoelang pele ho fana ka li-circuits tsa SELV kapa PELV.
KHOPO
- Lithapo tsa motlakase li tlameha ho tsamaisoa ka karohano ea sebaka le likhoele tsa mats'oao le tsa data.
- Lithapo tsa matšoao a analogue le tsa dijithale le tsona li lokela ho aroloa.
- Ho khothalletsoa ho sebelisa lisebelisoa tse sirelelitsoeng bakeng sa matšoao a analogue, lithebe tsa cable ha lia lokela ho sitisoa ke li-terminals tse bohareng.
- Tšireletso e lokela ho etsoa fatše ka ho toba ka mor'a hore mohala o kene ka har'a cabinet.
- Ho kgothaletswa ho kenya li-suppressors tsa ho kena-kenana ha u fetola meroalo ea ho kenya letsoho (mohlala, li-coil tsa li-contactor, li-relay, li-valve tsa solenoid). RC snubbers kapa varistors li loketse AC voltage le diode tsa freewheeling tsa DC voltage meroalo. Lintho tse hatellang li tlameha ho kopanngoa haufi le coil ka hohle kamoo ho ka khonehang.
TS'ELISO TS'OANE
Ka kopo bala litaelo pele u sebelisa kapa u sebelisa sesebelisoa. Haeba ho na le lipotso ka mor'a ho bala tokomane ena, ka kopo ikopanye le Sehlopha sa Tšehetso sa iSMA CONTROLLI (support@ismacontrolli.com).
Pele o kenya mohala kapa o tlosa / o kenya sehlahisoa, etsa bonnete ba hore o tima motlakase. Ho hloleha ho etsa joalo ho ka baka ts'okelo ea motlakase.- Wiring e sa nepahalang ea sehlahisoa e ka e senya 'me ea lebisa likotsing tse ling. Netefatsa hore sehlahisoa se kentsoe ka nepo pele o bulela motlakase.
- Se ke oa tšoara likarolo tsa motlakase tse kang litheminale tsa motlakase. Ho etsa joalo ho ka baka ts'okelo ea motlakase.
- U se ke ua qhaqha sehlahisoa. Ho etsa joalo ho ka baka ts'okelo ea motlakase kapa ts'ebetso e fosahetseng.
Sebelisa sehlahisoa feela ka har'a mekhahlelo ea ts'ebetso e khothalletsoang ho latela maemo (mocheso, mongobo, voltage, ts'oenyeho, moo ho hloellang teng, sepakapaka, joalo-joalo). Ho hloleha ho etsa joalo ho ka baka mollo kapa ts'ebetso e fosahetseng.- Ka tieo tiisa lithapo ho terminal. Ho hlōleha ho etsa joalo ho ka baka mollo.
- Qoba ho kenya sehlahiswa haufi le disebediswa tsa motlakase tse matla haholo le dithapo, meroalo e kenyang matla, le disebediswa tsa ho switjha. Ho ba haufi le lintho tse joalo ho ka baka tšitiso e sa laoleheng, e leng se bakang ts'ebetso e sa tsitsang ea sehlahisoa.
- Tlhophiso e nepahetseng ea matla le pontšo ea cabling e ama ts'ebetso ea tsamaiso eohle ea taolo. Qoba ho kenya motlakase le lithapo tsa mats'oao ka har'a literei tsa cable tse bapileng. E ka etsa hore ho be le litšitiso ho matšoao a behiloeng leihlo le ho laola.
- E khothalletsoa ho laola matla / li-module tse nang le bafani ba motlakase ba AC / DC. Ba fana ka insulation e ntlafetseng le e tsitsitseng haholoanyane bakeng sa lisebelisoa ha e bapisoa le lisebelisoa tsa AC / AC transformer, tse fetisang likhathatso le liketsahalo tsa nakoana tse kang ho surge le ho phatloha ho lisebelisoa. Li boetse li arola lihlahisoa ho tsoa ho li-inductive phenomena ho tsoa ho li-transformer tse ling le meroalo.
- Sistimi ea phepelo ea motlakase bakeng sa sehlahisoa e lokela ho sireletsoa ke lisebelisoa tsa kantle tse fokotsang ho fetatage le liphello tsa ho tsoa ha lehalima.
- Qoba ho matlafatsa sehlahisoa le lisebelisoa tsa sona tse laoloang / tse hlokometsoeng, haholo-holo matla a phahameng le meroalo e kenyang matla, ho tsoa mohloling o le mong oa matla. Lisebelisoa tsa matla tse tsoang mohloling o le mong oa matla li baka kotsi ea ho hlahisa litšitiso ho tloha mejaro ho ea ho lisebelisoa tsa taolo.
- Haeba AC/AC transformer e sebelisoa ho fana ka lisebelisoa tsa taolo, ho khothaletsoa ka matla ho sebelisa li-transformer tsa 100 VA Class 2 ho qoba litlamorao tse sa batleheng, tse kotsi bakeng sa lisebelisoa.
- Mehala e telele ea ho shebella le ho laola e ka baka li-loops mabapi le phepelo ea motlakase e arolelanoang, e bakang litšitiso ts'ebetsong ea lisebelisoa, ho kenyelletsa le puisano ea kantle. Ho khothalletsoa ho sebelisa li-separators tsa galvanic.
- Ho sireletsa likhoele tsa mats'oao le likhokahano khahlano le litšitiso tse kantle tsa motlakase, sebelisa likhoele tse sirelelitsoeng hantle le lifaha tsa ferrite.
- Ho fetola liphatlalatso tsa dijithale tsa meroalo e meholo e kholo (e fetelletseng) ho ka baka tšitiso ho lisebelisoa tsa elektroniki tse kentsoeng ka har'a sehlahisoa. Ka hona, ho kgothaletswa ho sebelisa li-relay / li-contactor tse ka ntle, joalo-joalo ho fetola meroalo e joalo. Tšebeliso ea li-controller tse nang le liphetho tsa triac li boetse li fokotsa overvolve e tšoanangtage phenomena.
- Liketsahalo tse ngata tsa tšitiso le ho fetellatage in control system e hlahisoa ke switched, inductive loads e fanoang ke alternating mains vol.tage (AC 120/230 V). Haeba li se na li-circuits tse hahelletsoeng kahare tsa ho fokotsa lerata, ho khothaletsoa ho sebelisa lipotoloho tse kantle joalo ka li-snubber, li-varistors, kapa li-diode tsa ts'ireletso ho fokotsa litlamorao.
Ho kenngoa ha motlakase oa sehlahisoa sena ho tlameha ho etsoa ho ea ka likhoutu tsa wiring tsa naha le ho lumellana le melao ea libaka.
FCC TLHOKOMELISO
Hlokomela: Thepa ena e lekoa 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:
- Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
- Eketsa karohano pakeng tsa thepa le moamoheli.
- Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
- Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.
B MTERS UK | www.bmetersuk.com | iSMA
Re latele ho: E hokahane le / bmetersuk
Litokomane / Lisebelisoa
 |
B METERS iSMA-B-4I40-H-IP Mojule o Nang le Modbus TCP/IP E Hahiloe Ka har'a Keiti ea Modbus [pdf] Tlhophiso Tataiso iSMA-B-4I40-H-IP Module Ka Modbus TCP IP E Hahiloe Ka hare ho Modbus Gateway, iSMA-B-4I40-H-IP, Mojule o Nang le Modbus TCP IP E Hahiloe Keiting ea Modbus, Modbus TCP IP E Hahiloe ka Modbus Gateway, IP e Haheletsoeng ka Modbus Gateway, e Hahiloeng ka Modbus Gateway, Modbus Gateway, Gateway |
