Sistimi e se nang mohala ea AVMATRIX TS3019
SEBELISA UNIT KA BOLOKEHI
Pele o sebelisa yuniti ena, ka kopo bala litemoso le litemoso tse ka tlase tse fanang ka leseli la bohlokoa mabapi le ts'ebetso e nepahetseng ea yuniti. Ntle le moo, ho etsa bonnete ba hore o utloisisa hantle karolo e 'ngoe le e 'ngoe ea yuniti ea hau e ncha, bala bukana e ka tlase. Bukana ena e lokela ho bolokoa 'me e lule e le teng bakeng sa ho sebelisoa haholoanyane.
Tlhokomediso Le Ditemoso
- Ho qoba ho oa kapa ho senyeha, ka kopo o seke oa beha yuniti ena holim'a kariki e sa tsitsang, setulong kapa tafoleng.
- Sebetsa yuniti feela ho phallo e boletsoengtage.
- Hakolla thapo ea motlakase ka sehokelo feela. U se ke ua hula karolo ea cable.
- Se ke oa beha kapa oa lihela lintho tse boima kapa tse nchocho thapong ea motlakase. Thapo e senyehileng e ka baka likotsi tsa mollo kapa tsa motlakase.
- Kamehla hlahloba thapo ea motlakase bakeng sa ho senyeha kapa ho senyeha ho feteletseng ho qoba likotsi tse ka bang teng tsa mollo / motlakase.
- Se ke oa sebelisa sesebelisoa sebakeng se kotsi kapa se ka bang le seqhomane. Ho etsa joalo ho ka fella ka mollo, ho phatloha, kapa liphello tse ling tse kotsi.
- Se ke oa sebelisa yuniti ena metsing kapa haufi le metsi.
- Se ke oa lumella maro, likotoana tsa tšepe kapa lisebelisoa tse ling ho kena yuniti.
- Tšoara ka hloko ho qoba ho makala ha u tsamaea. Ho thothomela ho ka baka ho se sebetse hantle. Ha o hloka ho tsamaisa yuniti, sebelisa lisebelisoa tsa pele tsa ho paka kapa o phuthetse ho hong ho lekaneng.
- Se ke oa tlosa likoahelo, liphanele, casing kapa ho fihlella li-circuits ka matla a sebelisitsoeng yuniti!
- Tlosa motlakase 'me u hakolle thapo ea motlakase pele o tlosoa. Tshebeletso/tokiso ya diyuniti ka hare e lokela ho etswa feela ke basebetsi ba nang le mangolo.
- Tima yuniti haeba ho na le ho se tloaelehe kapa ho se sebetse hantle. Hakolla tsohle pele o tsamaisa yuniti.
Hlokomela
ka lebaka la boiteko bo sa khaotseng ba ho ntlafatsa lihlahisoa le likarolo tsa sehlahisoa, litlhaloso li ka fetoha ntle le tsebiso.
Kenyelletso e Khutšoanyane
Fetileview
TS3019 ke sistimi e se nang mohala, e leng sistimi e thusang e bonts'ang boemo ba hajoale ba khaso (lebone le lefubelu) le boemo bo tlang (lebone le letala) la opareitara ea khamera, moamoheli, le basebetsi ba bang ba amanang le bona ka letšoao le bofubelu le botala bo botala. litaba ka nako ea sebele. The wireless tally system e loketse interview mananeo, litšoantšiso, lipapali, machato a phelang, likereke, le mesebetsi e meng ea khaso e phelang.
Likarolo tse ka Sehloohong
- Ho fihla ho 200m sebaka sa khokahanyo ea waelese (mohala oa pono)
- Lebokose la tally le nang le lihokelo tse ngata tse kenyelletsang GPIO/USB/RS-485/RS-232
- GPIO e lumellana le AVMATRIX le li-switcher tse ling tsa video
- E lumellana le VMix ka USB-C
- RS-232/RS-485 ts'ehetso ea protocol ea TSL ea ho kenya Tally le tlhaiso-leseling ea taolo ea phetisetso ea tsela e le 'ngoe.
- Ts'ehetsa khokahano ea Tally ea 433Mhz e se nang mohala le khokahanyo ea RS-485 e nang le wired Tally
- The Tally lamp e ka tsamaisoa ke Micro-USB kapa 18650 Li-ion betri
- Ka bobeli litsupa ka pele le ka morao ho lamps e nang le khanya e feto-fetohang ea maemo a 4, khanya e fihlang ho 2000cd/㎡
- Matla a lets'oao a bonahalang le boemo ba betri lethathamong la lamp
- 1/4 inch seeta se chesang bakeng sa tally lamp ho kenya
- Ts'ehetsa taolo ea khamera ea PTZ e hole ka RS-232/RS-485
Li-interface
Tobetsa konopo ea matla hakhutšoanyane ho fetola khanya ea lebone, 'me u tobetse nako e telele konopo ea matla ho bulela le ho tima matla.
Hlokomela: Pontšo ea matla a pontšo: ha pontšo e le matla pontšo ea pontšo e bontša botala, ha pontšo e leka-lekaneng letšoao le bontša mosehla, 'me ha letšoao le fokola letšoao le bontša bofubelu.
Pontšo ea matla: ha matla a lekane pontšo e bonts'a botala, ha matla a le karolelano letšoao le bonts'a mosehla, ha matla a le tlase, letšoao le bontša bofubelu, 'me ha ho tjhaja letšoao la matla lea bonesa, ha ho tjhaja ho felile, letšoao la matla. e emisa ho benya mme lebone le letala le dula le butswe.
GPIO Tlhaloso
| GPIO | Tlhaloso | GPIO | Tlhaloso |
| 1 | GND E Thehiloe | 14 | PVW12 e tala Tally12 |
| 2 | PGM12 khubelu Tally12 | 15 | PVW11 e tala Tally11 |
| 3 | PGM11 khubelu Tally11 | 16 | PVW10 e tala Tally10 |
| 4 | PGM10 khubelu Tally10 | 17 | PVW9 e tala Tally9 |
| 5 | PGM9 khubelu Tally9 | 18 | PVW8 e tala Tally8 |
| 6 | PGM8 khubelu Tally8 | 19 | PVW7 e tala Tally7 |
| 7 | PGM7 khubelu Tally7 | 20 | PVW6 e tala Tally6 |
| 8 | PGM6 khubelu Tally6 | 21 | PVW5 e tala Tally5 |
| 9 | PGM5 khubelu Tally5 | 22 | PVW4 e tala Tally4 |
| 10 | PGM4 khubelu Tally4 | 23 | PVW3 e tala Tally3 |
| 11 | PGM3 khubelu Tally3 | 24 | PVW2 e tala Tally2 |
| 12 | PGM2 khubelu Tally2 | 25 | PVW1 e tala Tally1 |
| 13 | PGM1 khubelu Tally1 |
RS-485 Tlhaloso
The Tally transmitter le receiver RS-485 pins li hlalosoa ka tsela e latelang.
Lithako tsa Tally output ka lehlakoreng la moamoheli li hlalosoa ka tsela e latelang.
Sets'oants'o sa sehokelo sa phetisetso sa GPIO (Lebokose la Tally)
Sets'oants'o sa sebopeho sa Tally (Tally lamp)
Tlhaloso
|
TS'ELISO LEKOBE LIEKETSENG |
Lihokelo | 1×GPIO，1×RS-232，1×RS-485，1×USB type-c |
| Nomoro ea Lamps | Tšehetsa ho fihla ho 16 tally lamps (12 LED lamp) | |
| Sebaka sa Wireless | Phetiso ho fihla ho 200m (mohala oa pono) | |
| Khokahano e se nang mohala | 433MHz | |
| Khokahano ea Wired | Khokahano ea serial ea RS-485 | |
| Tšehetso ea Kopo | Li-switcher tsa video tse nang le sebopeho sa GPIO-tally joalo ka AVMATRIX, Roland, SONY, NewTek, Panasonic, DataVideo, kapa lebokose la converter le nang le GPIO joalo ka BMD's GPI le tally interface. |
| Matla | Sebetsa Voltage: 5V, Tšebeliso ea Matla: ≤ 0.2W | |
|
TS'ELISO LAMP LIEKETSENG |
Lihokelo | 1×USB Type-c,1×RS-485,TALLY OUT |
| Phepelo ea motlakase | Phepelo ea matla a 5V USB kapa 18650 lithium betri (khetho) phepelo ea matla | |
| Khanya | Tšehetsa khanya ea maemo a 4 | |
| Nako ea Ts'ebetso ea Betri | ho fihlela lihora tse 9 (ho ipapisitse le matla a betri le lamp khanya le tikoloho ea tšebeliso) | |
| Matla | Sebetsa Voltage: 5V; Tšebeliso ea Matla: ≤2.5W; Ho Chaja Betri ea Hona Joale: 5V 1A | |
| Mouting Hole | 1/4 inch lesoba la hotshoe | |
|
BA BANG |
Boemo (LWD) | Lebokose la lipalo: 104 * 75.5 * 24.5mm
Tally lamp: 98.5*65*26.5 limilimithara |
| Boima ba 'mele | Lebokose la lipalo: 327g
Tally lamp: 90g (ntle le betri) |
|
| Mocheso | Mocheso o sebetsang: -20 ℃ ~ 60 ℃
mocheso polokelo: -30 ℃ ~ 70 ℃ |
|
| Lisebelisoa | Lebokose la Tally: 1 × phepelo ea matla (5V 1A), 1× USB2.0 mofuta oa c cable, 1×antenna, 1×GPIO sehokelo
Tally lamp: 1× USB2.0 mofuta-c cable |
Mesebetsi ea DIP
The dip switch ea lebokose la Tally e fana ka litlhophiso tse latelang:
DIP SW 1-2
- Phetoho ena e sebelisetsoa ho khetha sebopeho sa ho kenya.
- ha (SW1, SW2) e setetswe ho (1,1), GPIO e tla kgethwa.
- ha (SW1, SW2) e setetswe ho (1,0), USB-C e tla kgethwa.
DIP SW 3
- Sesebelisoa sena se sebelisetsoa ho khetha ho kenya le ho hlahisa sebopeho sa RS-485.
- Ha e setetsoe ho 1, RS-485 e khethoa e le input, 'me ha e setetsoe ho 0, RS-485 e khethoa e le tlhahiso.
- RS485 e hlophisitsoe joalo ka sehlahisoa ha ho hlokahala khokahano ea mohala lipakeng tsa lebokose la tally le tally l.amp.
DIP SW 4
- Phetoho ena e sebelisetsoa ho seta taolo ea khetho pakeng tsa DIP le software ea PC.
- Ha e behiloe ho 1, e sebetsa ho latela li-parameter tsa hona joale tsa DIP; ha e setetsoe ho 0, li-parameter tsa DIP ha li sebetse 'me ho sebelisoa li-parameter tse hahelletsoeng ka har'a komporo ea PC.
DIP SW 5
Phetoho ena e sebelisoa ho hlophisa sehlopha sa mabokose a lipalo. Ha e setetsoe ho 1, sehlopha sa 1 sea khethoa, 'me ha se setetsoe ho 0, sehlopha sa 2 sea khethoa.
Hlokomela: Transmitter le receiver tsa sehlopha se le seng li lokela ho hlophisoa ka har'a sehlopha se le seng.
Ts'ebetso ena e sebelisoa ha ho hlokahala lipalo tse fetang bonngoe ho sebetsa ka nako e le 'ngoe (ka har'a sebaka sa 1km radius) ho thibela matšoao a lihlopha tse fapaneng ho kena-kenana. Boemo ba feme ke sehlopha sa 1. Ha lets'oao le sa amoheloe, hlahloba hore na li-setting tsa sehlopha sa TX le RX ke sehlopha se le seng. DIP e ka hlophisoa bakeng sa lihlopha tse peli, software e ka hlophisoa bakeng sa lihlopha tse ka bang 8.
DIP SW 6
Sesebelisoa sena se sebelisetsoa ho khetha boemo ba ts'ebetso ea sebopeho sa USB-C. Ha e behiloe ho 1, sebopeho sa USB-C se boemong ba ho sebetsa, 'me ha se behiloe ho 0, sebopeho sa USB-C se boemong ba tlhophiso' me se sebelisoa ho hokela komporong ho laola liparamente tsa tlhophiso ea software.
Li-switches tsa dip bakeng sa Tally lamp fana ka litlhophiso tse latelang:
DIP1 SW 1-4
Sesebelisoa sena se sebelisetsoa ho beha palo ea Tally lamp. Lenaneo le tsamaisana le tlhahiso ea Tally.
DIP2 SW 1
Phetoho ena e sebelisetsoa ho beha mofuta oa khokahanyo ea tally lamp. Ha SW1 e behiloe ho 1, palo ea lamp e hoketsoe ka waelese 'me e bonesa ka ho amohela tlhaiso-leseling e tsoang ho mochini o fetisang mohala oa lebokose la tally, mme ha SW1 e behiloe ho 0, kakaretso lamp e hoketsoe ka mehala 'me e bonesoa ka khokahano ea RS485 ho lebokose la tally.
DIP2 SW2
Phetoho ena e sebelisetsoa ho seta taolo ea khetho pakeng tsa DIP le software ea PC. Ha e behiloe ho 1, e sebetsa ho latela li-parameter tsa hona joale tsa DIP; ha e setetsoe ho 0, li-parameter tsa DIP ha li sebetse 'me li-parameter tse hahelletsoeng ka har'a komporo ea PC lia sebelisoa.
DIP2 SW3
Phetoho ena e sebelisetsoa ho beha sehlopha sa lipalo lamps.
DIP2 SW4
Phetoho ena e sebetsa e le senotlolo se bolokiloeng 'me ha e na mosebetsi.
Taelo ea Ts'ebetso
Khokahano ea switcher ea video
Vmix Connect TS3019
Mohato oa 1: Lokisa lebokose la Tally le Tally lamp
Etsa tlhahiso ea lebokose la Tally ho USB-C (SW1:1, SW2:0). Beha Tally lamp ho ea ho 1, 2, 3, le 4 ka ho latellana.
Mohato oa 2: Sebelisa thapo ea USB A ho ea ho C ho hokela kou ea USB Type C ea lebokose la Tally le kou ea USB-A ea komporo. Sheba Mookameli oa Sesebelisoa ho PC ho hlahloba boemo ba boema-kepe ba COM bo hokahaneng le lebokose la Tally. Setšoantšo se ka tlase se bontša COM3.
Mohato oa 3: Kenya software ea Vmix
Bula ho seta ha Vmix, tobetsa Tally-Lights, 'me u tsosolose mokhoa oa kamehla joalokaha ho bontšitsoe ka tlase. Basebelisi ba ka eketsa PIN ea bona ho latela palo ea 'nete ea Tally lamps. (Ka mohlalaample, ha o batla ho hokela 6 Tally lamps, o hloka ho tlatsa PreviewPIN le ActivePIN ka tatellano ho tloha 2.3 ea lamp 1 ho lamp 6 ho latela melao, ebe o tobetsa ho netefatsa), joalo ka ha ho bonts'itsoe setšoantšong se latelang.
Mohato oa 4: Khokahano
Tobetsa habeli kenyeletso ka 'ngoe, tobetsa Tally Lights, khetha boemo ba boema-kepe ba COM, Nomoro ea Tally khetha Tally lamp e tsamaellanang le mohloli oa ho kenya, 'me u ka qeta ho lokisa khokahano. (Boemo ba boema-kepe ba COM joalo ka ha bo bonts'itsoe ka tlase ke COM3, Nomoro ea Tally e khetha lamp 1, letšoao la 1 lebokoseng la Tally le bonesa, le lamp 1 e tla khantša, ke hore, khokahano.)
Khokelo ea Wired Tally
Taolo ea serial e hole (taolo ea remote ea khamera ea PTZ)
Lisebelisoa
Lebokose la Tally le na le 1 × adapter ea matla (5V 1A), 1 × antenna, 1 × USB2.0 mofuta oa c cable, 1 × GPIO sehokelo, le Tally l.amp e na le thapo ea mofuta oa 1 × USB2.0.
Litokomane / Lisebelisoa
 |
Sistimi e se nang mohala ea AVMATRIX TS3019 [pdf] Buka ea Taelo TS3019 Wireless Tally System, TS3019, Wireless Tally System, Tally System, System |
