HOCHIKI BHC-4111

HOCHIKI BHC-4111 Emergency Alarm Composite Device User Manual

Model: BHC-4111 | Brand: HOCHIKI

Selelekela

Welcome to the user manual for the HOCHIKI BHC-4111 Emergency Alarm Composite Device. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before installation and operation, and keep it for future reference.

Boitsebiso ba Tšireletseho

This section outlines important safety precautions. Failure to follow these instructions may result in property damage, injury, or improper device operation.

  • Ho kenya ho lokela ho etsoa feela ke basebetsi ba tšoanelehang.
  • Do not attempt to modify or repair the device yourself. Contact authorized service personnel.
  • Ensure the power supply meets the device's specifications.
  • Keep the device free from dust, moisture, and extreme temperatures.
  • Regularly inspect the device for any signs of damage or malfunction.

Sehlahisoa se Felletseview

The HOCHIKI BHC-4111 is an emergency alarm composite device designed for exposed installation. It integrates an alarm light, speaker, and activation button for comprehensive emergency notification.

HOCHIKI BHC-4111 Emergency Alarm Composite Device

Tlhaloso ea setšoantšo: A beige rectangular device featuring a prominent red dome-shaped alarm light at the top, a black speaker grille below it, and an orange panel with a push button and text at the bottom. This image illustrates the front view of the HOCHIKI BHC-4111 unit.

Tlhophiso

  1. Ho phutha: Carefully remove the device from its packaging. Verify all components are present (main unit).
  2. Sebaka sa ho Beha: Select a suitable location for exposed installation, ensuring it is easily accessible and visible in case of an emergency. Avoid areas with excessive vibration, moisture, or direct heat.
  3. Wiring: Connect the device to the appropriate power source and alarm system wiring according to local electrical codes and the detailed wiring diagram provided in the full installation guide (not included in this basic manual). Tlhophiso ea litsebi e khothaletsoa haholo.
  4. Matla a Pele: Once wired, apply power to the device. Observe for any indicator lights or initial self-tests.

Litaelo tsa Ts'ebetso

The BHC-4111 is designed for straightforward operation in emergency situations.

Ho kenya letsoho alamo

In the event of an emergency, press the designated activation button located on the orange panel of the device. This will trigger the alarm light and sound.

Ho khutsisa Alamo

Follow the procedures established by your facility's emergency response plan to silence the alarm. This typically involves resetting the main alarm control panel. Refer to your system's specific instructions.

Leseli la Lipontšo

The device may feature indicator lights to show its status (e.g., power, fault, alarm active). Consult the full installation guide for a detailed explanation of each indicator.

Tlhokomelo

Regular maintenance ensures the reliable operation of your BHC-4111 device.

  • Ho hloekisa: Periodically clean the exterior of the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Teko ea Mosebetsi: Conduct periodic functional tests as recommended by local regulations and your facility's safety protocols. This typically involves activating the alarm and verifying its operation.
  • Phetoho ea Battery (haeba ho hlokahala): If the device contains backup batteries, ensure they are replaced according to the manufacturer's recommendations.
  • Tlhahlobo ea Setsebi: Schedule regular inspections and maintenance by qualified technicians to ensure compliance and optimal performance.

Ho batle phoso

This section provides basic troubleshooting steps for common issues. For complex problems, contact a qualified technician.

BothataLebaka le ka khonehangTharollo
Alamo ha e sebetseNo power; Faulty wiring; Device malfunctionCheck power supply; Verify wiring connections; Contact service technician
Alamo e lla khafetsaSystem not reset; Faulty activation buttonReset main alarm panel; Contact service technician
No light/soundPower issue; Component failureCheck power; Contact service technician

Litlhaloso

  • Lebitso: HOCHIKI
  • Nomoro ea Mohlala: BHC-4111
  • Boholo ba Sehlahisoa: 6 cm (Botebo) x 14 cm (Bophara) x 25.4 cm (Bolelele)
  • Likarolo tse Kenyelelitsoeng: Sehlopha se seholo
  • Moetsi: Hochiki Corporation
  • Mofuta: Emergency Alarm Composite Device (Exposed Type)

Warranty le Tšehetso

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact Hochiki Corporation directly.

Hlokomela: This manual provides general guidance. Always refer to the official manufacturer's documentation for complete and up-to-date information.

Litokomane tse Amanang - BHC-4111

Peleview Hochiki FireNET PLUS Litaelo tsa Ts'ebetso ea FN-1127 Control Panel le Bahlahisi ba FN-LCD-S
Comprehensive operating instructions for the Hochiki FireNET PLUS FN-1127 control panel and FN-LCD-S annunciators, detailing fire and trouble conditions, button functions, fuse replacement, battery maintenance, and SOM-R releasing function.
Peleview Dating Hochiki Fire Alarm Devices: A Guide by Fire Trade Supplies
Learn how to date Hochiki fire alarm devices, including the ATJ-EN model, using serial numbers and manufacturing codes. Find contact details for Fire Trade Supplies.
Peleview Tataiso ea Sehlahisoa sa Hochiki ISS30:MAR24 - Mekhoa ea ho Khetholla Mollo le Litharollo
Tataiso e felletseng ea sehlahisoa ho tsoa Hochiki, e hlalosang mefuta ea bona e tsoetseng pele ea lits'ebetso tsa ho lemoha mollo, ho kenyeletsoa le aterese, e tloaelehileng, e se nang mohala le ea moea.ampmahlale a mang. Ithute ka boitlamo ba Hochiki ho boqapi ba polokeho ea mollo.
Peleview HOCHIKI ACE-V Analog Multi-Criteria Detector - Litlhaloso tsa Setegeniki le Likarolo
Lintlha tse felletseng mabapi le HOCHIKI ACE-V Analog Multi-Criteria Detector, ho kenyeletsoa lits'ebetso tsa eona, likarolo tse tloaelehileng, ts'ebetso, litlhaloso tsa tekheniki, le lethathamo la lihlahisoa. E etselitsoe ho lemoha mosi o sebetsang hantle le mocheso.
Peleview FNV 25 / FNV 50 / FNV 100 Voice Evacuation Interface System Installation Instructions
Comprehensive installation guide for the Hochiki FNV 25, FNV 50, and FNV 100 Voice Evacuation Interface Systems. Covers system overview, installation procedures, wiring details, terminal designations, operation, specifications, switch settings, and troubleshooting.
Peleview Hochiki DCP-SOM-AI/DCP-SOM-A Class A Supervised Output Module Installation Instructions
Detailed installation guide for Hochiki America's DCP-SOM-AI and DCP-SOM-A Class A Supervised Output Modules, covering general description, mounting, wiring, specifications, and SCI operation.