ARRIS MN-128

ARRIS MN-128 1/12 Bukana ea Tataiso ea Sekala sa RC Rock Crawler

Model: MN-128

1. Selelekela

Thank you for choosing the ARRIS MN-128 1/12 Scale RC Rock Crawler. This hobby-grade remote control vehicle is designed for enthusiasts seeking realistic off-road performance and detailed design. With its 4x4 drive system, durable construction, and precise control, the MN-128 is ready to conquer various terrains. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and enjoyment.

ARRIS MN-128 RC Rock Crawler in orange

Figure 1: The ARRIS MN-128 1/12 Scale RC Rock Crawler.

2. Se ka Lebokoseng

The ARRIS MN-128 comes as a Ready-To-Run (RTR) package, including everything needed to start your adventure:

  • 1x ARRIS MN-128 1/12 Scale RC Rock Crawler
  • 1x 2.4GHz Remote Control Transmitter
  • 1x 7.4V 1200mAh Battery
  • 1x USB Charger
  • 1x Buka ea Litaelo

3. Likarolo

The MN-128 RC Rock Crawler is engineered with several key features for enhanced performance and realism:

  • Realistic Design & Durable Build: Features a highly detailed 1/12 scale Jeep Wrangler design with a sturdy hard plastic shell, functional doors, roof racks, bumpers, and side mirrors.
  • Ts'ebetso e Phahameng: Equipped with a 4WD system, powerful 390 magnetic motor, and 250g waterproof servo for exceptional traction and stability.
  • Taolo e Nepahetseng: Proportional throttle and steering system allow for smooth acceleration and responsive turning.
  • Bokhoni ba All-Terrain: Durable vacuum tires, independent suspension, high-elastic shock absorbers, and high ground clearance enable excellent performance on rocky, grassy, sandy, and muddy terrains.
  • Customizable & Upgradable: Supports aftermarket enhancements like metal gears, upgraded servos, and larger batteries. The paintable body shell allows for personalized customization.
  • Advanced Lighting System: Features functional LED headlights, brake lights, reverse lights, and front/rear turn signals for enhanced realism and visibility.
ARRIS MN-128 RC Crawler showcasing 4WD all-terrain design and Wrangler style

Figure 2: 4WD All-Terrain Design of the MN-128.

Tlase view of the ARRIS MN-128 RC Crawler showing 4x4 improved performance components

Figure 3: Improved 4x4 Performance Components.

ARRIS MN-128 RC Crawler with openable doors, highlighting simulation design

Figure 4: Simulation Design with Openable Doors.

Ka botlalo view of the ARRIS MN-128 chassis and internal components

Figure 5: Internal Components and Chassis Layout.

4. Seta

The MN-128 is designed for quick setup. Follow these steps to get started:

  1. Hlahisa Betri: Connect the provided 7.4V 1200mAh battery to the USB charger. Plug the charger into a suitable USB power source. The indicator light on the charger will show the charging status (e.g., red for charging, green for fully charged).
  2. Kenya Betri: Carefully remove the body shell of the RC crawler. Locate the battery compartment and securely place the charged battery inside. Connect the battery cable to the vehicle's power connector.
  3. Kenya Libetri tsa Remote Control: Open the battery compartment on the remote control. Insert 1 AA battery (included) ensuring correct polarity. Close the compartment.
  4. Matlafatsa: Turn on the RC crawler by pressing and holding the power button (usually located on the chassis) for a few seconds until the LED lights illuminate. Then, turn on the remote control. The remote and vehicle should automatically bind. If not, refer to the remote control's specific binding instructions.

5. Litaelo tsa Ts'ebetso

Once set up, you can begin operating your ARRIS MN-128 RC Rock Crawler. Familiarize yourself with the remote control functions:

  • Throttle: Use the trigger on the remote control to move the vehicle forward (pull) and backward (push).
  • Tsamaiso: Use the steering wheel on the remote control to turn the vehicle left or right.
  • Sistimi ea Lebone: The remote control may have buttons to cycle through different lighting modes for the headlights, brake lights, and turn signals. Experiment with these to enhance your driving experience.
ARRIS MN-128 RC Crawler showing precision lighting system with headlights, brake lights, reverse lights, and turn signals

Figure 6: Precision Lighting System.

The 2.4GHz remote control system ensures interference-free operation, allowing multiple RC cars to run simultaneously. The MN-128 is built to handle rugged terrain, sand, mud, rocks, and mountain trails with its independent suspension and high-traction tires.

Video 1: Demonstration of the MN-128 RC Crawler in action on various terrains.

6. Tlhokomelo

Regular maintenance will prolong the life and performance of your RC crawler:

  • Ho hloekisa: After each use, especially in dusty or muddy conditions, clean the vehicle with a soft brush or compressed air. Avoid using water directly on electronic components.
  • Tlhokomelo ea Betri: Always fully charge the battery before storage and discharge it to approximately 50% if storing for extended periods. Do not overcharge or over-discharge the battery.
  • Tlhahlobo: Periodically check all screws, linkages, and moving parts for looseness or damage. Tighten any loose screws and replace damaged parts as needed.
  • Lubrication: Apply a small amount of RC-safe lubricant to moving metal parts (e.g., drive shafts, gears) to reduce wear and friction.

7. Ho rarolla mathata

If you encounter issues with your MN-128, refer to the following common problems and solutions:

  • Koloi ha e Arabe:
    • Ensure both the vehicle and remote control are powered on.
    • Hlahloba hore na betri e tjhajilwe ka botlalo mme e hokahantswe hantle.
    • Verify that the remote control batteries are fresh and correctly installed.
    • Re-bind the remote control to the vehicle if necessary (refer to remote control instructions).
  • Poor Performance/Weak Power:
    • The battery may be low; recharge it fully.
    • Check for debris or obstructions in the drivetrain or wheels.
    • Inspect the motor and gears for any visible damage or wear.
  • Mathata a Tsamaiso:
    • Check the steering trim on the remote control.
    • Inspect the steering servo and linkages for damage or obstructions.

8. Litlhaloso

Detailed specifications for the ARRIS MN-128 RC Rock Crawler:

  • Sekala: 1/12
  • Boholo ba Sehlahisoa: 15 x 8 x 7 lisenthimithara
  • Boima ba Ntho: 5.19 liponto
  • Lebelo: 8KM/H
  • Climbing Angle: ≤45°
  • Tractive Force: 20KG
  • Loading Weight: 5KG
  • Enjene: 390 Strong Motor
  • Sebetsa: 25g Waterproof Servo
  • Tsela ea ho tsamaisa: ≤30°
  • Signal/Distance: 2.4G/50m
  • Lilemo tse khothalelitsoeng ke moetsi: Lilemo tse 16 ho ea holimo
Dimensions of the ARRIS MN-128 RC Crawler

Setšoantšo sa 7: Litekanyo tsa Lihlahisoa.

9. Boitsebiso ba Tšireletseho

Ho netefatsa ts'ebetso e sireletsehileng le ho thibela tšenyo, ka kopo latela litataiso tse latelang tsa polokeho:

  • Always operate the RC crawler in open areas away from people, pets, and obstacles.
  • Do not operate in wet conditions or near water, as electronics may be damaged (unless specifically rated waterproof).
  • Keep fingers, hair, and loose clothing away from moving parts (wheels, gears, drive shafts).
  • Supervise children during operation, even if they meet the recommended age.
  • Use only the provided charger and battery. Do not attempt to modify or use incompatible components.
  • Store the vehicle and battery in a cool, dry place away from direct sunlight and heat.

10. Tiisetso le Tšehetso

The ARRIS MN-128 RC Rock Crawler is designed for durability and performance. While specific warranty details are not provided in this manual, ARRIS is committed to customer satisfaction. If any issues arise with your product, please contact our support team for assistance. We are ready to help resolve any concerns you may have.

Litokomane tse Amanang - MN-128

Peleview ARRIS SURFboard Cable Modem Guide Quick Start Guide
Tataiso e potlakileng ea ho qala le ho tsamaisa Modem ea Cable ea ARRIS SURFboard, ho kenyeletsoa litaelo tsa khokahano le likarolo tsa app ea mobile.
Peleview ARRIS HFC Kantle ho Plant Operational Playbooks
ARRIS Global Services e fana ka libuka tsa ho bapala tsa HFC Outside Plant Operational Playbook ho ntlafatsa ts'ebetso le maemo a ho laola marang-rang a hybrid fiber-coax. Libuka tsena tsa ho bapala li kopanya lits'ebetso tsa bohlokoa, tlhaiso-leseling ea lisebelisoa, le litataiso tsa ho seta bakeng sa litsebi, ho fokotsa ho itšetleha ka tsebo ea morabe le ho potlakisa koetliso.
Peleview ARRIS Touchstone TG2492 Telephony Gateway Buka ea Mosebelisi
Tataiso ea mosebelisi bakeng sa ARRIS Touchstone TG2492 Telephony Gateway, e koahelang ts'ebetso, tlhophiso, khokahanyo e se nang mohala le Ethernet, le ho rarolla mathata bakeng sa marang-rang a lapeng le a ofisi.
Peleview ARRIS Touchstone TG2472G Telephony Gateway Tataiso ea Mosebelisi
Tataiso ea mosebelisi bakeng sa ARRIS Touchstone TG2472G Telephony Gateway, e hlalosang ho kenya, ho hlophisoa, likarolo tse kang DOCSIS 3.0, VoIP, MoCA 2.0, khokahanyo ea waelese, le ho rarolla mathata.
Peleview Arris VIP 7300 TV Receiver: Basic Instructions and Setup
Detailed guide for installing and using the Arris VIP 7300 TV receiver, covering package contents, remote control, connections, initial setup, and useful features.
Peleview ARRIS Standard Software License Agreement and Limited Warranty
This document outlines the standard license agreement and limited warranty for ARRIS products and software. It details terms of use, restrictions, intellectual property rights, and warranty coverage for both hardware and software components.