Light My Bricks 2.0 Light Kit for LEGO Alpine Lodge #10325 Instruction Manual

1. Selelekela

Sehlahisoa se Felletseview

This Light My Bricks 2.0 Light Kit is designed to enhance your LEGO Alpine Lodge #10325 set by adding custom lighting. The kit includes 17 lights and various components to illuminate the set's details, transforming it into a vibrant display piece.

The Alpine Lodge will become a focal point of your Winter Village Collection with these integrated lights, highlighting its intricate design and features.

Image 1.1: The LEGO Alpine Lodge #10325 set illuminated by the Light My Bricks 2.0 Light Kit.

2. Boitsebiso ba Tšireletseho

Warning: Choking Hazard - small parts. Not for children under 3 years.

Always handle components with care. Keep small parts away from young children to prevent choking. This product is recommended for ages 12 years and up.

3. Se Akarelletsoang

The Light My Bricks 2.0 Light Kit for LEGO Alpine Lodge #10325 contains the following components:

• 17 x Lights
• 6 x Belts
• 2 x Docks
• 1 x Flux Power
• 6 x Lisebelisoa
• 19 x Assorted Bricks

Image 3.1: Packaging for the Light My Bricks Alpine Lodge Light Kit.

4. Seta

Tataiso ea ho Kena

This light kit is designed to illuminate your pre-built LEGO Alpine Lodge #10325 set. It is not intended for installation during the initial construction of the LEGO set.

For detailed, step-by-step installation instructions, please refer to the 3D installation guide. You can access this guide by scanning the QR code located on the side of the product box. The 3D guide is carefully crafted to ensure clear assembly of every brick and component.

Setšoantšo sa 4.1: Example of light placement within the LEGO Alpine Lodge.

Image 4.2: Detail of the illuminated fireplace.

Image 4.3: Detail of the illuminated 'Two Pines Inn' sign.

Image 4.4: Detail of the illuminated Christmas tree.

5. Litaelo tsa Ts'ebetso

Powering Your Light Kit

To power your Light My Bricks kit, we recommend using a USB Power Bank or a USB Wall Adaptor. These power sources are not included with the light kit and must be acquired separately. Connect the kit's USB cable to your chosen power source to activate the lights.

6. Tlhokomelo

To ensure the longevity and optimal performance of your light kit, follow these general maintenance guidelines:

• Ho hloekisa: Gently dust the light components and wires with a soft, dry cloth. Avoid using liquids or abrasive cleaners.
• Ho tšoara: Handle the wires and small components with care to prevent damage. Avoid excessive bending or pulling of wires.
• Polokelo: If disassembling for storage, carefully coil wires and store components in a dry, dust-free environment.

7. Ho rarolla mathata

If you encounter issues with your Light My Bricks kit, consider the following common solutions:

• Mabone ha a sebetse: Ensure the USB power source is properly connected and functioning. Check all cable connections to ensure they are secure.
• Mabone a Flickering: This may indicate a loose connection or insufficient power. Verify all connections and try a different USB power source if available.
• Likaroloana tse Senyehileng: If any components appear physically damaged, contact customer support for assistance. Do not attempt to repair damaged wires or lights yourself.

8. Litlhaloso

9. Tšehetso le Iteanye

For additional support, product information, or to explore other lighting kits, please visit the official Light My Bricks store:

Visit the Light My Bricks Store