1. Selelekela
The JOYO Orthros Selector JF-24 is a versatile line selector guitar pedal designed to enhance your guitar rig by offering two independent effect loops and multiple looping modes. This device allows for flexible integration of various effects pedals and digital devices, providing greater control over your sound. This bundle also includes a JOYO DC 9V 500mA power adapter, ensuring reliable power for your pedal.
Image 1: JOYO Orthros Selector JF-24 Guitar Pedal
2. Likahare tsa Sephutheloana
Ka kopo, sheba litaba tsa sephutheloana ho netefatsa hore lintho tsohle li teng:
- JOYO Line Selector Guitar Pedal (ORTHROS SELECTOR JF-24)
- JOYO DC 9V 500mA Pedal Power Supply Adapter
3. Litaolo le Mesebetsi
The JF-24 features intuitive controls for managing your effect loops:
- 1. LINE A LEVEL Control Knob: Adjusts the output level of Line A.
- 2. LINE B LEVEL Control Knob: Adjusts the output level of Line B.
- 3. LINE Mode Selection Control Knob: Selects one of the six available looping modes.
- Footswitch: Engages or bypasses the selected effect loop(s) or switches between outputs depending on the mode.
- INNPUT Jack: Connect your guitar or the output of previous pedals in your signal chain here.
- PHELELANO Jack: Kopana le hau amplifier or the input of subsequent pedals.
- SEND A / RETURN A Jacks: For connecting effects pedals to Line A.
- SEND B / RETURN B Jacks: For connecting effects pedals to Line B.
- Kenyo ea DC 9V: For connecting the included 9V DC power adapter.
Image 2: Labeled controls of the JF-24 pedal
4. Seta
4.1. Khokelo ea Matla
Connect the included DC 9V 500mA power adapter to the DC 9V input jack on the pedal. Ensure the adapter is center-negative. Using an incorrect power supply can damage the unit.
4.2. Khokahano ea liletsa
Connect your guitar to the INPUT jack of the JF-24. Connect the OUTPUT jack of the JF-24 to your amplifier or the next pedal in your signal chain.
Image 3: JF-24 connected in a basic setup
4.3. Connecting Effect Loops
The JF-24 features two independent effect loops, Line A and Line B. To connect pedals to a loop:
- Connect the ROMELA A jack to the input of the first pedal in your Line A effect chain.
- Connect the output of the last pedal in your Line A effect chain to the RETURN A jack.
- Repeat the process for Line B using the SEND B le RETURN B lijeke.
Image 4: Diagram showing two line loops (A and B) for connecting effects
5. Mekhoa ea ho sebetsa
The JF-24 offers six looping modes, selectable via the LINE Mode Selection Control Knob. These modes allow for various configurations of your effect loops:
- 1. A/B: Switches between Line Loop A and Line Loop B.
- 2. A/BYPASS: Switches between Line Loop A and a bypassed signal (dry guitar signal).
- 3. B/BYPASS: Switches between Line Loop B and a bypassed signal (dry guitar signal).
- 4. A/B/BYPASS: Cycles through Line Loop A, Line Loop B, and a bypassed signal.
- 5. A+B/BYPASS: Switches between both Line Loop A and Line Loop B engaged simultaneously, and a bypassed signal.
- 6. A/B/OUT SELECT: This mode allows you to use the SEND A, SEND B, and OUTPUT jacks as three independent outputs. Your guitar signal goes into the INPUT, and you can switch between sending it to SEND A, SEND B, or the main OUTPUT. This is useful for routing your signal to different amplifiers (e.g., guitar amp, base amp, tuner) or other destinations. In this mode, the RETURN A and RETURN B jacks are not used for effect loops.
Image 5: Diagram illustrating the 6 looping modes
6. Litlhaloso
- Mohlala: EA-24-JF
- Mofuta oa Sehokelo: 1/4" Mono Jack, 2.1mm Barrel Connector
- Sebopeho sa Matsoho: Analoge
- Mohloli oa Matla: Corded Electric (DC 9V, center negative)
- Moqtage: 9 Volts (DC)
- Tšebeliso ea Hona Joale: 22mA
- Mofuta oa Taolo: Footswitch, Rotary Knobs
- Boholo (hoo e ka bang): 120mm (4.72in) x 97mm (3.81in) x 55mm (2.17in)
Image 6: Dimensions and power supply tips for the JF-24
7. Power Adapter Information
The included JOYO DC 9V 500mA Pedal Power Adapter is designed with smart and professional IC chips for noise reduction and isolated safe protection performance. It is compatible with most pedals requiring a tip-negative 9V power supply.
Image 7: Features of the included DC 9V 500mA power adapter
7.1. Ho lumellana
The JF-24 is designed to work with a wide range of effect pedals. The power adapter is also compatible with most brands of pedals requiring a tip-negative 9V power supply.
Image 8: JF-24 compatibility with various pedal brands
8. Ho rarolla mathata
- Ha ho Molumo: Ensure all cables are securely connected to the correct input/output jacks. Verify the power adapter is properly connected and supplying power. Check the volume levels on your guitar, pedal, and ampmoqhobi.
- Unexpected Noise: Ensure all connections are tight. Use a high-quality, isolated power adapter to minimize noise. If using multiple pedals, ensure they are properly grounded.
- Pedal Not Engaging: Check the selected operating mode. Some modes may require specific configurations for the footswitch to activate loops.
- Tone Loss: If you experience tone loss when a pedal is off but still in a loop, consider placing that pedal in one of the JF-24's loops and using the selector to bypass it completely when not in use.
9. Tlhokomelo
To ensure the longevity and optimal performance of your JOYO Orthros Selector JF-24:
- Keep the pedal clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Qoba ho beha pedal mochesong o feteletseng, mongobong, kapa letsatsing le tobileng.
- O se ke wa leka ho qhaqha kapa ho fetola pedal, kaha sena se ka etsa hore tiisetso e se ke ya sebetsa mme sa baka tshenyo.
- Always use the correct power supply (DC 9V, center negative) to prevent damage.
10. Tiisetso le Tšehetso
For warranty information, technical support, or service inquiries, please refer to the official JOYO website or contact your authorized JOYO dealer. Keep your purchase receipt as proof of purchase for warranty claims.
