Buka ea litaelo tsa Crystorama Xavier Light Chandelier 5

Selelekela

Thank you for choosing the Crystorama Xavier 5 Light Chandelier. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Xavier chandelier features a vibrant gold finish with blue metal shades, designed for indoor use in damp libaka.

Litaelo tsa Bohlokoa tsa Tšireletso

• TLHOKOMELISO: To avoid electric shock, always turn off the power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
• Likhokahano tsohle tsa motlakase li tlameha ho latela melao ea lehae, melaoana, kapa Molao oa Naha oa Motlakase (NEC). Buisana le setsebi sa motlakase se tšoanelehang haeba u sa tloaelane le likhokahano tse nepahetseng tsa terata ea motlakase.
• Sebelisa feela mofuta oa bulb e boletsoeng le wattage. Se ke oa feta boholo ba wattage bonts'itsoeng holim'a sebopeho.
• Do not install this fixture in areas where it may be directly exposed to water. It is authorized for use in damp, high-humidity interior locations or protected exterior locations.
• Handle the fixture with care. Avoid dropping or striking the fixture or its components.
• Keep flammable materials away from the light source.

Litaba tsa Sephutheloana

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the fixture. Contact Crystorama customer service for assistance.

• Chandelier main body with arms
• Canopy and mounting hardware
• Downrods (various lengths for adjustable height)
• Blue metal shades (5 units)
• Lihokelo tsa terata
• Hlokomela: Li-bulbs ha li kenyelelitsoe.

Tataiso ea ho Kena

Pele O Qala

• Tima motlakase ho sekhechana sa potoloho.
• Netefatsa hore bokaholimo ba ho kenya bo ka tšehetsa boima ba sesebelisoa.
• Bokella lisebelisoa tse hlokahalang: sekurufetsi, lithapo tse hlobolang terata, theipi ea motlakase, lere.

Kenyelletso ea Mohato ka Mohato

1. Lokisetsa ho Beha: Secure the mounting bracket to the junction box in the ceiling using the provided screws. Ensure it is firmly attached.
2. Fetola Bophahamo: Determine the desired hanging height. Connect the appropriate downrods to the fixture body and the canopy. The fixture includes (1) 6-inch and (3) 12-inch rods for customization.
3. Wiring: Carefully connect the fixture's electrical wires to the corresponding wires from the junction box. Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box. Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box. Connect the green or bare copper (ground) wire from the fixture to the green or bare copper (ground) wire from the junction box. Secure connections with wire connectors and electrical tape.
4. Mount Canopy: Carefully push the canopy up against the ceiling, ensuring all wires are tucked inside the junction box. Secure the canopy to the mounting bracket using the provided screws.
5. Hokela Shades: Place each blue metal shade onto its respective light socket.
6. Kenya Li-bulbs: Screw in five (5) E26 Medium base bulbs (not included) into the sockets. Do not exceed 60 watts per bulb.

Tlhaloso ea setšoantšo: This diagram provides detailed measurements of the Crystorama Xavier Chandelier. It shows the overall width of 28 inches, a depth of 28 inches, and a height of 12.5 inches for the fixture body. The diagram also indicates the lengths of the included downrods: one 6-inch rod and three 12-inch rods, allowing for an adjustable total hanging height up to 57.5 inches from the ceiling to the bottom of the fixture.

Tlhaloso ea setšoantšo: Ka pele e hlakileng view of the Crystorama Xavier 5 Light Chandelier. The fixture features a vibrant gold metal frame with five gracefully curved arms extending outwards. Each arm supports a light socket covered by a conical blue metal shade. The central stem and canopy are also in the vibrant gold finish, presenting a modern yet classic aesthetic.

Operating Your Chandelier

Once properly installed and wired, your Crystorama Xavier Chandelier is operated via a standard wall switch connected to the fixture's electrical circuit. Ensure the wall switch is in the 'ON' position to provide power to the chandelier.

Tlhokomelo le Tlhokomelo

• Ho hloekisa: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish.
• Phetoho ea Bulb: Always turn off the power before replacing bulbs. Allow bulbs to cool completely before touching. Replace with E26 Medium base bulbs, not exceeding 60 watts.
• Tlhahlobo: Periodically inspect the fixture for any loose connections or signs of wear.

Ho batle phoso

• Lebone ha le laete:
  • Hlahloba hore na motlakase o butswe ho sethibela-madi.
  • Netefatsa hore switch ea lebota e boemong ba 'ON'.
  • Verify that bulbs are correctly installed and not burnt out.
  • Check wiring connections for proper contact.
• Mabone a benyang:
  • Ensure bulbs are screwed in tightly.
  • Sheba hore na ha ho na likhokahano tsa lithapo tse hlephileng.
  • Confirm bulbs are compatible with any dimmer switch, if installed.

Litlhaloso tsa Sehlahisoa

Tlhaloso ea setšoantšo: An icon depicting a water droplet, signifying that the Crystorama Xavier Chandelier is authorized for use in damp locations. This includes interior spaces with high humidity, such as bathrooms, or protected exterior locations like covered porches, ensuring product suitability and safety in these environments.

Warranty le Tšehetso

The Crystorama Xavier Chandelier comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your purchase or contact Crystorama customer service directly. Keep your proof of purchase for warranty purposes.

Tlhahisoleseling e 'Ngoe

This fixture is designed for indoor use and is suitable for damp locations, meaning it can be used in areas with moisture, such as bathrooms or covered outdoor spaces, but not directly exposed to water. It meets United States UL Underwriters Laboratories Product Safety Standards.

Tlhaloso ea setšoantšo: A lifestyle photograph showing the Crystorama Xavier Chandelier elegantly installed in a modern living space. The vibrant gold finish and blue shades complement the room's decor, highlighting the fixture's ability to enhance the aesthetic of various interior designs.