Arylic BP50 Bluetooth PreampLifier Buka ea mosebelisi

1. Selelekela

The Arylic BP50 is a versatile Bluetooth 5.2 aptX Home Audio Preamplifier designed to integrate modern wireless and digital audio sources with traditional home stereo systems. It features a wide array of inputs including HDMI ARC, Phono, Optical, Line In, and USB, along with RCA and subwoofer outputs. The BP50 also supports Bluetooth transmission, allowing you to send audio to Bluetooth headphones or speakers. This manual provides detailed instructions for setup, operation, and maintenance of your BP50 preampmoqhobi.

2. Boitsebiso ba Tšireletseho

• Ensure the device is connected to a power source with the correct voltage.
• U se ke ua beha yuniti metsing, mongobong, kapa mochesong o feteletseng.
• Qoba ho beha yuniti haufi le mehloli ea mocheso kapa mahlaseling a letsatsi.
• Do not attempt to open or repair the unit yourself. Refer all servicing to qualified personnel.
• Boloka moo bana ba ka fihlang teng.
• Tlosa motlakase nakong ea lifefo tsa lehalima kapa ha o sa sebelisoe nako e telele.

3. Likahare tsa Sephutheloana

Ka kopo, sheba sephutheloana sa lintho tse latelang:

• Arylic BP50 Bluetooth Preampmoqhobi
• Remote Control
• Adapter ea Matla
• Bukana ea mosebelisi (tokomane ena)
• Liantenna

4. Sehlahisoa Overview

4.1 Panel e ka pele

Setšoantšo sa 4.1: Pele view of the Arylic BP50 preamplifier. It features a power switch, input indicators (Standby, Bluetooth, Line, Phono, Optical, HDMI ARC, USB, DAC), and a volume/mode knob.

The front panel provides easy access to essential controls and indicators:

• ON / Off switjha: E matlafatsa kapa e tima yuniti.
• Lipontšo tsa ho Kena: LEDs illuminate to show the currently selected audio input (Standby, Bluetooth, Line In, Phono, Optical, HDMI ARC, USB, DAC).
• Volume/Mode Knob: Controls the audio output volume. Pressing the knob cycles through input modes.

4.2 Phanele e ka morao

Setšoantšo sa 4.2: Ka morao view of the Arylic BP50 preamplifier, detailing all connection ports.

The rear panel houses all connectivity options:

• Antenna ea BLE: For Bluetooth Low Energy connection.
• Keletso ea DC: Kou ea khokahano ea motlakase.
• GND: Ground terminal for Phono input.
• Ho Tswa ha Coaxial: Digital coaxial audio output.
• SW Out: Subwoofer output for connecting an active subwoofer.
• Line Out (RCA): Analog RCA stereo audio output.
• Optical Out: Digital optical audio output.
• Phono In (RCA): Analog RCA input for turntables with a built-in preampmoqhobi.
• Ho Kena Moleng (RCA): Analog RCA stereo audio input for general audio devices.
• Optical In: Kenyelletso ea audio ea digital ea optical.
• ARC (HDMI): HDMI Audio Return Channel input for TV audio.
• USB: USB input for playing audio from USB storage devices.
• DAC: USB DAC input for connecting to a computer.
• Khutlisa: Konopo ea ho seta sesebelisoa bocha.
• BT Antenna: For Bluetooth audio connection.

5. Seta

5.1 Ho hokela Matla

Connect the provided power adapter to the DC Input port on the rear panel of the BP50, then plug the adapter into a wall outlet. The unit will enter standby mode.

5.2 Hokela Mehloli ea Molumo

The BP50 supports various audio input types:

• HDMI ARC: Connect an HDMI cable from your TV's HDMI ARC port to the BP50's ARC input. This allows your TV's audio to play through the BP50 and connected speakers, and often allows TV remote control of volume.
• Kenyeletso ea Phono: Connect your turntable's RCA output to the BP50's Phono In ports. Ensure your turntable has a built-in preamplifier or use an external one. Connect the turntable's ground wire to the BP50's GND terminal if available.
• Ho Kena Moleng (RCA): Connect analog audio devices (e.g., CD player, cassette deck) using RCA cables to the Line In ports.
• Optical In: Connect digital audio devices (e.g., game console, set-top box) using an optical cable to the Optical In port.
• USB: Kenya USB flash drive e nang le molumo files ho koung ea USB.
• USB DAC: Connect the BP50 to your computer via a USB cable to use it as an external DAC.

Setšoantšo sa 5.1: Bluetooth Receiver Mode connections, illustrating various source devices.

5.3 Connecting Audio Outputs

Connect the BP50 to your audio system:

• Liphetho tsa RCA: Connect the Line Out (RCA) ports to the input of your amplifier, powered speakers, or AV receiver.
• Tlhahiso ea Subwoofer: Connect an active subwoofer to the SW Out port for enhanced bass.
• Bluetooth Transmitter Mode: The BP50 can transmit audio to up to two Bluetooth headphones or speakers simultaneously.

Setšoantšo sa 5.2: Bluetooth Transmitter Mode, showing audio output to two Bluetooth headphones.

6. Litaelo tsa Ts'ebetso

6.1 Ts'ebetso ea Motheo

• Tlosa/Tima: Press the ON/OFF switch on the front panel.
• Taolo ea Bolumo: Rotate the Volume/Mode knob on the front panel or use the remote control to adjust the volume.
• Khetho ea Lintho: Press the Volume/Mode knob to cycle through available inputs (BT, Line, Phono, OPT, ARC, USB, DAC). Alternatively, use the dedicated input buttons on the remote control.

6.2 GO CONTROL APP

The GO CONTROL APP provides comprehensive control over your BP50. It is available for both iOS and Android devices.

Setšoantšo sa 6.1: Various screens of the GO CONTROL APP, showing playback, EQ, and settings.

• Khoasolla: Batla "GO CONTROL" in your device's app store.
• Khokahano: Ensure your mobile device's Bluetooth is enabled and connect to the BP50.
• Likaroloana: App e u lumella ho:
• Customize EQ settings (equalizer).
• Fetola lebitso la sesebelisoa.
• Select custom themes.
• Manage USB playlists.
• Control audio source selection.
• Adjust volume and playback.

6.3 Mokhoa oa ho amohela Bluetooth

To receive audio via Bluetooth:

1. Select "BT" as the input source on the BP50.
2. On your source device (smartphone, tablet, computer), enable Bluetooth and search for "Arylic BP50".
3. Select the BP50 to pair. Once paired, audio from your device will play through the BP50.

6.4 Bluetooth Transmitter Mode

The BP50 can transmit audio from any of its inputs to Bluetooth headphones or speakers.

1. Ensure the BP50 is playing audio from your desired input source (e.g., Phono, HDMI ARC).
2. Put your Bluetooth headphones/speakers into pairing mode.
3. On the BP50, activate Bluetooth transmission (refer to the remote control or app for specific button/setting). The BP50 can transmit to up to two Bluetooth devices simultaneously.

6.5 ACP Workbench Tuning Tool

The ACP Workbench is a Windows-based software tool developed by Arylic for advanced audio customization.

• Mosebetsi: Allows for real-time response tuning, customizing EQ for each channel, adjusting L/R balance, and adding various audio effects.
• Tšebelisano: This software is for Windows operating systems only and may require a fee.
• Tšebeliso: Connect your BP50 to a Windows PC to utilize this tool for fine-tuning your audio experience. Settings can be saved and applied to other Arylic devices.

7. Tlhokomelo

• Ho hloekisa: Sebelisa lesela le bonolo, le omeletseng ho hloekisa bokantle ba yuniti. Se ke oa sebelisa lihloekisi tsa metsi kapa li-aerosol.
• Moea oa moea: Ensure proper ventilation around the unit to prevent overheating. Do not block any ventilation openings.
• Polokelo: Haeba u boloka yuniti ka nako e telele, e tlose motlakaseng 'me u e boloke sebakeng se pholileng, se omileng.

8. Ho rarolla mathata

9. Litlhaloso

10. Tiisetso le Tšehetso

Arylic products are designed for reliability and performance. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Arylic website. You can also contact Arylic customer service for assistance with any issues or questions regarding your BP50 preampmoqhobi.