Selelekela
This manual provides essential information for the proper setup, operation, and maintenance of your LG 24 inch FHD (1920x1080) Monitor. Featuring a 100Hz refresh rate, 5ms response time, IPS panel with sRGB 99% color gamut, and AMD FreeSync technology, this monitor is designed for clear visuals and smooth performance. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
Setšoantšo: Pele view of the LG 24 inch FHD monitor, showcasing its 3-side borderless display and vibrant screen.
Boitsebiso ba Tšireletseho
- Always disconnect the power cord from the wall outlet before cleaning the product.
- Do not expose the monitor to rain or moisture to prevent fire or electric shock.
- Netefatsa moea o nepahetseng. Se ke oa thibela menyetla ea moea.
- Sebelisa feela adaptara ea motlakase e fanoeng le sesebelisoa.
- Qoba ho beha lintho tse boima holim'a thapo ea motlakase.
- Se ke oa leka ho fana ka sehlahisoa sena u le mong. Fetisetsa litšebeletso tsohle ho basebetsi ba tšoanelehang ba litšebeletso.
Litaba tsa Sephutheloana
Netefatsa hore likarolo tsohle li teng ka har'a sephutheloana:
- LG 24 inch FHD Monitor Display Panel
- Lekola Stand Base
- Lekola Ema Molala
- Mohala oa Matla
- Cable ea HDMI
- Bukana ea mosebelisi (tokomane ena)
Tlhophiso
1. Ho Kopanya Setulo
Carefully place the monitor display panel face down on a soft, clean surface to prevent scratches. Attach the stand neck to the display panel, then secure the stand base to the neck. Ensure all screws are tightened securely.
Setšoantšo: Ka morao view of the LG monitor with the stand fully assembled and attached. This shows the monitor's back panel and the stand's connection point.
Setšoantšo: Side profile of the LG monitor, illustrating the slim design and the ergonomic stand's tilt capability.
2. Ho hokela Lithapo
Connect the HDMI cable from your computer's graphics card to the HDMI input port on the monitor. Then, connect the power cord to the monitor's power input and plug the other end into a wall outlet.
Image: Close-up rear view of the LG monitor, highlighting the various input ports including HDMI and power.
Setšoantšo: Ka morao view of the LG monitor with the power and HDMI cables connected, demonstrating proper cable management.
3. Ho Matlafatsa
Press the power button located on the bottom center of the monitor to turn it on. The power indicator light will illuminate.
Ho sebetsa
1. Mesebetsi ea Motheo
- Tlosa/Tima: Press the joystick button on the bottom center of the monitor.
- Navigation ea Menu: Move the joystick left, right, up, or down to navigate the On-Screen Display (OSD) menu. Press the joystick to select an option.
- Khetho ea Lintho: Access the OSD menu and select "Input" to switch between connected devices (e.g., HDMI).
2. Litlhophiso tsa Pontšo
Adjust display settings such as brightness, contrast, and color temperature through the OSD menu. The monitor features an IPS panel with sRGB 99% color gamut for vivid and accurate colors.
3. AMD FreeSync Premium
This monitor supports AMD FreeSync Premium, which synchronizes the monitor's refresh rate with your graphics card's frame rate to reduce screen tearing and stuttering during gaming. Ensure FreeSync is enabled in both the monitor's OSD menu and your graphics card's control panel.
4. Reader Mode
To reduce eye strain during prolonged reading, activate Reader Mode via the OSD menu. This mode adjusts color temperature and brightness to simulate paper, reducing blue light emission.
Tlhokomelo
- Ho hloekisa skrine: Hlakola skrine ka bonolo ka lesela le bonolo le se nang letlapa. Bakeng sa matšoao a manganga, ha bobebe damptn lesela le nang le metsi kapa mochini o hloekisang skrineng. Se ke oa fafatsa sehloekisi ka kotloloho skrineng.
- Ho hloekisa Casing: Sebelisa lesela le bonolo, le omeletseng ho hlakola mochine casing. Qoba li-abrasive cleaners kapa solvents.
- Polokelo: Haeba o boloka sekirini nako e telele, kgaola dithapo tsohle mme o di boloke sebakeng se pholileng, se omileng, haholo-holo ka har'a sephutheloana sa sona sa pele.
Ho batle phoso
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Ha ho setšoantšo skrineng | Power cable disconnected; Video cable disconnected; Monitor is off. | Check power and video cable connections; Press the power button to turn on the monitor. |
| Setšoantšo se lerootho kapa se sothehile | Incorrect resolution setting; Video cable issue. | Set the display resolution to 1920x1080; Ensure the video cable is securely connected or try a different cable. |
| Sekrine se panyamenya | Refresh rate mismatch; Graphics card driver issue. | Ensure refresh rate is set to 100Hz; Update graphics card drivers. |
| Ha ho molumo (haeba ho hlokahala) | Audio cable disconnected; Volume too low; Incorrect audio output selected. | Check audio cable connection; Adjust volume; Select the correct audio output device in your computer settings. |
Litlhaloso
- Boholo ba skrini: 24 lisenthimithara
- Qeto: 1920 x 1080 (FHD 1080p)
- Mofuta oa Phanele: IPS
- Sekhahla sa ho Nchafatsa: 100 Hz
- Nako ea Karabo: 5ms (Motion Blur Reduction)
- Colour Gamut: sRGB 99% (CIE1931)
- Khanya: 250 cd/m²
- Phapang Ratio: 1200:1
- Aspect Ratio 16:9
- Khokahano: HDMI, Display Port (Video Inputs)
- Likarolo tse Khethehileng: AMD FreeSync Premium, Reader Mode, 3-Side Borderless Display
- Litekanyo (ka sethala): 21.3 x 16.3 x 7.9 lisenthimithara
- Boima ba Ntho: 10 liponto
- Moetsi: LG
- Nomoro ea Mohlala: 24 inch FHD
Warranty le Tšehetso
For warranty information and technical support, please refer to the official LG website or contact LG customer service directly. Keep your purchase receipt for warranty claims.
Tšehetso ea Bareki ba LG: https://www.lg.com/us/support