XCQQ Electric Heated Bidet Toilet Seat (Model XCQQ-S9BR) - Round

1. Selelekela

This manual provides comprehensive instructions for the installation, operation, and maintenance of your XCQQ Electric Heated Bidet Toilet Seat, Model XCQQ-S9BR. Designed for enhanced hygiene and comfort, this bidet seat offers a range of features including warm water wash, warm air drying, a heated seat, and a night light. Please read this manual thoroughly before use to ensure proper function and safety.

2. Boitsebiso ba Tšireletseho

• Ensure the power supply is unplugged before cleaning or maintenance.
• Do not immerse the unit in water or spray water directly onto the electrical components.
• Verify that the electrical outlet meets the specified voltage (120 Volts) le wattage (1300 watts).
• Do not attempt to disassemble, repair, or modify the unit yourself. Contact qualified service personnel.
• Sehlahisoa sena se etselitsoe tšebeliso ea malapa feela.

3. Likahare tsa Sephutheloana

Netefatsa hore likarolo tsohle li teng pele u qala ho kenya:

• Bidet toilet seat
• 3-way valve + DMT pipe (Pre-Installed)
• Lokisa poleiti
• Ho kenya lisebelisoa
• Buka ea litaelo

4. Likarolo tsa Sehlahisoa Fetaview

The XCQQ Electric Heated Bidet Toilet Seat offers a range of advanced features for a comfortable and hygienic experience:

• Electronic Bidet Toilet Seat: Features a soft-close lid, warm air dryer, adjustable water temperature and pressure, multiple cleaning modes, a display screen, LED night light, stainless steel nozzle with self-cleaning capabilities, and a modern side panel for easy control.
• Mekhoa e fapaneng ea ho hloekisa: Enjoy tailored comfort with bidet warm water washing (adjustable between 92℉ and 104℉). Choose from options like rear cleansing, feminine washing, and one-touch auto cleaning & drying. The self-cleaning nozzle activates before and after each use.
• Customizable Nozzle Position: Personalize your routine with adjustable nozzle positions and an oscillating spray feature. The system remembers your last nozzle position setting.
• Heated Toilet Seat: Provides gentle warmth with adjustable temperature settings for comfort, especially on cold days.
• Ho Omisa Moea o Mofuthu: Reduces paper waste with an integrated warm air dryer, offering a convenient, hands-off experience. Adjustable temperature settings ensure comfort.
• Quiet and Convenient: Features a soft-closing lid and seat, along with an optional silent mode for beep sounds. A subtle nightlight offers illumination for nighttime use.

Setšoantšo sa 1: Ho ea holimo view of the XCQQ Electric Heated Bidet Toilet Seat with its remote control.

Figure 2: The bidet seat installed on a toilet, highlighting the blue night light feature.

Setšoantšo sa 3: Ka botlalo view of the multi-function control panel, illustrating various settings and options.

Figure 4: Visual representation of key features including the operation panel, soft-close lid, automatic wash and dry function, and instant water heating system.

Figure 5: Additional features shown: warm air drying, heated toilet seat, smart LED display, and the toilet night light.

5. tlhomamiso Guide

Follow these steps to properly install your bidet toilet seat:

1. Hold down the side buckle to remove the fixing plate from the bidet seat.
2. Secure the fixing plate to the toilet using the provided screws and adjustment sheets.
3. Push the smart toilet seat onto the fixing plate by holding down the side buckle until it clicks into place.
4. Turn off the water supply valve to your toilet.
5. Attach the three-way valve to the threads of the toilet tank.
6. Connect the DMT pipe and filter to the three-way valve and the bidet seat.
7. Bula sephahla sa phepelo ea metsi.
8. Wait 3-5 minutes for the bidet to fill with water, then plug it into a 120V AC outlet.
9. When the power is activated, the LED light will start to blink, and the spray wand will automatically extend (without spray) and water will flow down into the toilet. This is a water spray check. The blue light will stop blinking in 1 minute.

Figure 6: Visual step-by-step instructions for installing the bidet toilet seat.

Figure 7: Important diagram to confirm your toilet size (round or elongated) and the necessity of an electrical outlet for installation.

6. Tataiso ea Ts'ebetso

The bidet seat is operated via the side control panel. Refer to Figure 3 for button layout.

6.1. Mesebetsi ea Motheo

• Power/PSM Mode: Turns the unit on/off or activates power-saving mode.
• Seat Temp: Adjusts the heated seat temperature.
• Mocheso oa Metsi: Adjusts the water temperature for washing.
• Water Pressure/Air Temperature: Adjusts the intensity of the water spray and the temperature of the warm air dryer.
• Nozzle Position (FR/BK): Moves the nozzle forward or backward to customize the spray area.
• Fafatsa: Activates the rear cleansing function.
• Bidet: Activates the feminine washing function.
• Ho omisa: E kenya tshebetsong sesebelisoa sa ho omisa moya se futhumetseng.
• Auto: Initiates an automatic washing and drying cycle.
• Ema: Stops all active functions.
• Leseli la Bosiu: Toggles the LED night light.

6.2. Sensor-Based Operation

The bidet features a body sensor. Washing and drying functions will only activate when a user is seated on the bidet. This prevents accidental spraying.

7. Tlhokomelo

7.1. Nozzle Self-Cleaning

The stainless steel nozzle performs a self-cleaning cycle both before and after each use to maintain hygiene.

7.2. Ho Hloekisa Kakaretso

• Unplug the bidet seat from the power outlet before cleaning.
• Hlakola bokantle ba bokantle ka bonolo, damp lesela le sehloekisi se bonolo, se sa cheng.
• Do not use harsh chemicals, abrasive cleaners, or scrub brushes, as these can damage the surface.
• Netefatsa hore libaka tsohle li omme pele o kenya unit hape.

8. Ho rarolla mathata

If you encounter issues, please refer to the following common troubleshooting steps:

• Ha ho matla: Check if the power cord is securely plugged into a working outlet. Ensure the circuit breaker has not tripped.
• No water spray: Confirm the water supply valve is fully open. Ensure the body sensor is engaged (you must be seated for the spray to activate).
• Water not warm: Allow a few minutes for the water heater to warm up. Check the water temperature setting on the control panel.
• Seat not warm: Check the heated seat temperature setting on the control panel.
• LED light blinking continuously for more than 5 minutes: Unplug the bidet and turn off the water valve. Turn on the water valve first, wait 3-5 minutes, then plug it in and do not operate any functions. The blue light should stop blinking in 1 minute.

Bakeng sa thuso e eketsehileng, ka kopo ikopanye le ts'ehetso ea bareki.

9. Litlhaloso

10. Tiisetso le Tšehetso

For warranty information and customer support, please refer to the documentation included with your product or visit the official XCQQ websebaka. Boloka rasiti ea hau ea theko bakeng sa likopo tsa tiisetso.