1. Selelekela
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Xprinter XP-Q801K Thermal Receipt Printer. This printer is designed for efficient and reliable receipt printing in various business environments, featuring high-speed direct thermal printing and a USB interface for easy connectivity.
Setšoantšo sa 1: Pele view of the Xprinter XP-Q801K Thermal Receipt Printer, showing the paper output slot and control buttons.
2. Seta
2.1 Ho phutha
Carefully remove the printer and all accessories from the packaging. Verify that all components are present:
- Xprinter XP-Q801K Thermal Receipt Printer
- Adapter ea Matla
- Cable ea USB
- Paper Roll (starter)
- Bukana ea mosebelisi (tokomane ena)
2.2 Ho hokela Printer
Before connecting, ensure the printer is powered off. Locate the ports on the rear of the printer.
Setšoantšo sa 2: Ka morao view of the printer, highlighting the power, USB, and other interface ports.
- Kopanya Matla: Insert the power adapter cable into the printer's power input port (DC 24V/2.5A) and plug the adapter into a suitable electrical outlet (AC 100-240V, 50-60Hz).
- Hokela USB: Connect one end of the provided USB cable to the USB port on the printer and the other end to an available USB port on your computer.
- Cash Drawer (Optional): If using a cash drawer, connect its cable to the cash drawer port (DC 24V/1A) on the printer.
2.3 Loading the Paper Roll
The printer uses 80mm wide thermal paper rolls.
- Open the paper cover by pushing the cover open button (usually located on the side or front).
- Insert the thermal paper roll with the printing surface facing the print head. Ensure the roll is seated correctly in the paper compartment.
- Hula pampiri e nyane ka pela seha.
- Koala sekoahelo sa pampiri ka thata ho fihlela se tobetsa sebakeng.
Setšoantšo sa 3: Lehlakore view of the printer, illustrating the paper cover mechanism.
2.4 Ho kenya Mokhanni
The printer requires a driver to communicate with your computer. Drivers are typically available for Windows, Linux, Android, and Mac operating systems.
- For Windows users, the printer often supports plug-and-play installation or requires a specific Windows driver.
- For Linux, Android, and Mac, SDKs (Software Development Kits) are usually provided for integration.
Sheba tsa moetsi website or the included driver CD/USB drive for the latest drivers and installation instructions specific to your operating system.
3. Ho sebetsa Printer
3.1 Ho Matlafatsa/Ho tima
Locate the power switch on the side or rear of the printer. Flip the switch to the 'ON' position to power on the printer. The 'POWER' indicator light will illuminate. Flip to 'OFF' to power down.
3.2 Indicator Lights and Buttons
The front panel typically features several indicator lights and buttons:
- MATLA: E bontša hore printa e butsoe.
- PHOSO: Illuminates or flashes to indicate an error condition (e.g., paper out, print head overheating, cutter error).
- PAMPIRI: E bontša hore moqolo oa pampiri o tlase kapa o kantle.
- FEED Konopo: Press to manually feed paper. Hold to perform a self-test print (if supported by model).
3.3 Khatiso ea Motheo
Once the printer is connected and drivers are installed, you can print receipts from your POS software or application. Ensure the printer is selected as the default or active printer in your system settings.
The printer supports various print speeds up to 300 mm/s and automatic paper cutting after each print job.
4. Tlhokomelo
Regular maintenance ensures optimal performance and extends the life of your printer.
4.1 Ho Hloekisa Hlooho ea Khatiso
The print head should be cleaned regularly, especially if print quality degrades.
- Tima printa 'me u hakolle thapo ea motlakase.
- Bula sekoahelo sa pampiri.
- Sebelisa swab ea k'hothone hanyaneampened with isopropyl alcohol (ethanol) to gently wipe the thermal elements of the print head.
- Lumella hlooho ea khatiso hore e ome ka ho feletseng pele u koala sekoahelo le ho kopanya motlakase hape.
4.2 Cleaning the Cutter
Paper dust can accumulate around the cutter blade, affecting its performance.
- Tima printa 'me u hakolle thapo ea motlakase.
- Carefully remove any visible paper dust or debris from around the cutter blade using a soft brush or compressed air.
- Do not use liquids on the cutter.
4.3 Tlhoekiso e Akaretsang
Hlakola bokantle ba printa ka bonolo, damp lesela. Qoba ho sebelisa lik'hemik'hale tse bohale kapa li-abrasive cleaners.
5. Ho rarolla mathata
This section addresses common issues you might encounter with your printer.
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Printa ha e bule. | Thapo ea motlakase ha e hokahane; Sehokelo sa motlakase se na le phoso; Sethibelo sa motlakase se timme. | Ensure power cable is securely connected. Test power outlet. Turn power switch to 'ON'. |
| Ha ho kgatiso. | Paper out; Paper loaded incorrectly; Driver not installed or incorrect; USB cable loose; Printer not selected. | Load new paper roll. Re-load paper correctly. Install/reinstall correct driver. Check USB connection. Select printer in software. |
| ERROR light is on/flashing. | Paper out; Paper jam; Print head overheating; Cutter error. | Load paper. Clear paper jam. Allow printer to cool down. Check cutter for obstructions. |
| Boleng bo fosahetseng ba khatiso. | Dirty print head; Low quality paper; Old paper roll. | Clean the print head (see Section 4.1). Use high-quality thermal paper. Replace old paper rolls. |
Haeba bothata bo ntse bo tsoela pele ka mor'a ho leka litharollo tsena, ka kopo ikopanye le ts'ehetso ea bareki.
6. Litlhaloso
| Sebopeho | Lintlha |
|---|---|
| Mokhoa oa ho Hatisa | Thermal e otlolohileng |
| Bophara ba Pampiri | 80 limilimithara |
| Lebelo la ho Hatisa | 230 mm/s, 260 mm/s, 300 mm/s |
| Sehokedi | USB |
| Sekheo sa Line | 3.75 mm (adjustable by commands) |
| Character Size (ANK) | Font A: 1.5 × 3.0 mm (12 × 24 dots) Font B: 1.1 × 2.1 mm (9 × 17 dots) |
| Character Size (Chinese/Traditional Chinese) | 3.0 × 3.0 mm (24 × 24 dots) |
| Mefuta ea Barcode | UPC-A / UPC-E / JAN13 (EAN13) / JAN8 (EAN8) / CODE39 / ITF / CODABAR / CODE93 / CODE128 |
| 2D Barcode | QR Code / PDF417 |
| NV Flash Memory | 256 KB |
| Matla a Kena | AC 100-240V, 50-60Hz |
| Matla a Output | DC 24V/2.5A |
| Sephetho sa Drawer ea Chelete | DC 24V/1A |
| Boima ba 'mele | 1.0 lik'hilograma |
| Litekanyo (D × W × H) | 194.5 × 145 × 146.4 limilimithara |
| Mocheso oa ho sebetsa | 0~45°C |
| Mongobo o sebetsang | 10 ~ 80% RH |
| Bophelo ba Mokga | Ho fokotsa limilione tse 1.5 |
| Print Head Life | 150 km |
| Tšebelisano ea OS | Windows, Linux, Android, Mac |
