1. Selelekela
This manual provides comprehensive instructions for the setup, operation, and maintenance of your iDPRT 320E Thermal Label Printer. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage. The iDPRT 320E is designed for efficient label printing in various environments, supporting multiple operating systems and connectivity options.
2. Se ka Lebokoseng
Netefatsa hore likarolo tsohle li teng ha ho buloa:
- iDPRT 320E Thermal Label Printer
- Buka ea Tataiso
- Cable ea data ea USB
- Adapter ea Matla
- Sample Labels
3. Sehlahisoa Overview
The iDPRT 320E Thermal Label Printer is a compact device designed for high-speed, high-resolution label printing. It features a simple design with essential ports for connectivity and an intuitive LED indicator for operational status.
Setšoantšo sa 3.1: Pele view of the iDPRT 320E Thermal Label Printer with sample labels.
Likarolo tsa Bohlokoa:
- Sebaka sa ho Tsoa ha Leibole: Moo mabitso a hatisitsoeng a hlahang teng.
- Cover Release Latches: Used to open the printer cover for label loading.
- Port ea Matla: E hokela ho adaptara ea motlakase.
- Boema-kepe ba USB: Bakeng sa khokahano e tobileng le khomphutha.
- Boema-kepe ba LAN: Bakeng sa khokahanyo ea marang-rang.
- Letšoao la LED: E bonts'a boemo ba printa.
4. Litaelo tsa ho seta
4.1 Khokelo ea Matla
- Hokela adaptara ya motlakase koung ya motlakase ya printa.
- Hokela adaptara ea motlakase sebakeng se loketseng sa motlakase.
4.2 Ho kenya Li-label
The printer supports thermal labels with widths between 1 and 3.15 inches.
- Gently press the cover release latches on both sides of the printer to open the top cover.
- Place the roll of thermal labels into the label compartment, ensuring the labels feed from the bottom of the roll and the printable side faces upwards.
- Adjust the label guides to fit the width of your labels snugly, without creasing bona.
- Pull a few labels past the print head and out through the label exit slot.
- Kwala sekoahelo se ka holimo ka thata ho fihlela se kena sebakeng sa sona.
Figure 4.1: Correct method for loading thermal labels into the printer.
4.3 Ho kenya Driver le Software
To use the printer with your computer, you must install the appropriate drivers and the Label Designer software.
- Visit the official iDPRT website to download the latest drivers for your operating system (Windows, Mac, or Linux).
- Download and install the free Label Designer software from the official website. This software is available for Windows and as an online editor for Mac users.
- Follow the on-screen instructions to complete the installation process for both the drivers and the software.
Figure 4.2: The iDPRT 320E printer supports multiple operating systems.
4.4 Dikgetho tsa kgokelo
The iDPRT 320E offers flexible connectivity:
- Khokahano ea USB: Connect the printer directly to your computer using the provided USB cable.
- LAN Network Connection: Connect the printer to your local area network using an Ethernet cable for shared access.
- Mobile App: For direct printing from your smartphone, download the iDPRT mobile application.
Figure 4.3: USB and LAN network connectivity options.
5. Litaelo tsa Ts'ebetso
5.1 Creating Labels with Label Designer Software
The Label Designer software allows you to create and customize various label types.
- Launch the Label Designer software on your computer.
- Select a template or start a new label design.
- Customize your labels with text, barcodes, QR codes, images, and various fonts. The software supports different label sizes and layouts.
- Ensure the label dimensions in the software match the physical labels loaded in the printer.
Figure 5.1: Designing labels using the Label Designer software.
5.2 Li-label tsa Khatiso
Once your label design is complete and labels are loaded:
- In the Label Designer software, click the 'Print' button.
- Select the iDPRT 320E printer from the list of available printers.
- Adjust print settings such as quantity and print speed if necessary. The printer supports speeds up to 180mm/s and a resolution of 203 DPI.
- Confirm the settings and initiate printing.
Figure 5.2: The printer delivers high-quality 203 DPI resolution for clear labels.
Figure 5.3: The printer is capable of high-speed printing up to 180mm/s.
5.3 LED Indicator Meanings
The LED indicator on the printer provides visual feedback on its status:
- Green (Solid On): The printer is currently printing.
- Red (Solid On): The printer cover is not properly closed, or there is a paper jam/error.
- Blue (Solid On): Mochine oa khatiso o se o loketse ho sebetsa.
6. Tlhokomelo
6.1 Ho hloekisa Printer
Ho hlwekisa kgafetsa ho thusa ho boloka boleng ba kgatiso mme ho eketsa nako ya bophelo ba printa.
- Ensure the printer is powered off and unplugged before cleaning.
- Sebelisa lesela le bonolo, le se nang linte dampened with isopropyl alcohol to gently wipe the print head. Avoid touching the print head with bare hands.
- Clean the exterior of the printer with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Remove any dust or label debris from the label compartment.
7. Ho rarolla mathata
If you encounter issues with your iDPRT 320E printer, refer to the following common problems and solutions:
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Printer ha e sebetse | Thapo ea motlakase e khaotsoe; Sehokelo sa motlakase se na le phoso | Check power connections; Try a different outlet. |
| Li-labels ha li hatisoe | Labels loaded incorrectly; Printer cover open; No drivers installed; Incorrect printer selected | Reload labels correctly; Close cover firmly; Install drivers; Select iDPRT 320E in print dialog. |
| Poor print quality (faded, blurry) | Print head dirty; Low-quality labels; Incorrect print density settings | Clean the print head; Use recommended thermal labels; Adjust print density in software settings. |
| Cannot connect via USB/LAN | Cable faulty; Driver issue; Network configuration problem | Try a different cable; Reinstall drivers; Verify network settings (for LAN). |
| Cannot connect via mobile app | App not installed; Printer not discoverable; Network issue | Ensure app is installed and updated; Check printer's network connection; Restart printer and app. |
| Mac Bluetooth connectivity issues | Direct Bluetooth printing to Mac is not supported; Driver limitations | Connect via USB or LAN for Mac systems. Mobile app connectivity is available for smartphones. |
8. Litlhaloso
Detailed technical specifications for the iDPRT 320E Thermal Label Printer:
| Sebopeho | Tlhaloso |
|---|---|
| Lebitso la Mohlala | 320E |
| Theknoloji ea Khatiso | Mocheso |
| Lebelo le Phahameng la ho Hatisa | 180 mm/s (Monochrome) |
| Maximum Print Resolution | 203 DPI |
| Boholo ba Media Size | 1"-3.15" inches width |
| Theknoloji ea Khokahano | USB, LAN |
| Lisebelisoa tse lumellanang | PC (Windows, Mac, Linux), Mobile (iOS/Android via App) |
| Mokhoa oa ho Laola | App, Software |
| Litekanyo tsa Sehlahisoa | 8.11"D x 6.1"W x 5.28"H |
| Boima ba Ntho | 3.78 liponto |
| Likarolo Tse Khethehileng | Automatic Label Recognition, LAN Network Connectivity |
9. Tiisetso le Tšehetso
9.1 Boitsebiso ba Tiisetso
The iDPRT 320E Thermal Label Printer comes with a limited warranty. Please refer to the warranty card included in your product packaging or visit the official iDPRT website bakeng sa dipehelo le dipehelo tse qaqileng.
9.2 Tšehetso ea Bareki
For technical assistance, troubleshooting, or any inquiries regarding your iDPRT 320E printer, please contact our customer service team. You can reach us via the Amazon messaging system or through the contact information provided on the official iDPRT website. Our team is available to assist you with any pre-sales or after-sales support needs.
