1. Selelekela
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Crystorama Libby Langdon Sylvan 4 Light Black Forged Lantern Chandelier. Please read all instructions carefully before beginning installation and retain this manual for future reference. Proper installation by a qualified electrician is recommended.
Setšoantšo sa 1.1: Pele view of the Crystorama Libby Langdon Sylvan 4 Light Black Forged Lantern Chandelier with shades.
2. Boitsebiso ba Bohlokoa ba Tšireletseho
Ho fokotsa kotsi ea mollo, ho tsukutloa ke motlakase, kapa ho tsoa kotsi, kamehla latela litemoso tsena tsa mantlha:
- Hakolla Matla: Always turn off the electrical supply at the main fuse or circuit breaker box before beginning installation or performing any maintenance.
- Motlakase ea Tšoanelehang: Installation should be performed by a qualified, licensed electrician.
- Ho beha fatše: Netefatsa hore sesebediswa se theilwe hantle ho qoba ho tshoha ha motlakase.
- Wiring: Likhokahano tsohle tsa terata li lokela ho etsoa ho latela melao ea motlakase ea lehae le ea naha.
- Bulb Wattage: Se ke oa feta boholo ba wattage specified for the bulbs. This fixture is designed for E12 base bulbs, up to 60 watts each.
- Ho tšoara: Handle the fixture and glass components with care to prevent breakage or injury.
- UL e thathamisitsoe: This product is UL listed, ensuring it meets specific safety standards.
3. Litlhaloso tsa Sehlahisoa
| Sebopeho | Tlhaloso |
|---|---|
| Brand | Crystalma |
| Lebitso la Mohlala | 2244-BF |
| Mmala | Motho e Motšo ea Fored |
| Lintho tse bonahalang | Alloy Steel (Frame), Glass (Shade) |
| Foromo ea ho Lokisa Leseli | Chandelier |
| Mofuta oa kamore | Living Room (General Purpose) |
| Litekanyo tsa Sehlahisoa | 21.5"L x 21.5"W x 29.75"H |
| Boima ba Ntho | 6 Liponto |
| Tšebeliso ea Ka hare/Kantle | Ka hare |
| Mohloli oa Matla | Hardwired |
| Mofuta oa Tlhophiso | Thaba ea Semi Flush |
| Mofuta oa Mohloli oa Leseli | LED Compatible (Bulbs not included) |
| Palo ea Mehloli ea Leseli | 4 |
| Moqtage | Li-volts tse 120 |
| Wattage (Max per bulb) | 60 Watts |
| Motheo oa Bulb | E12 |
| Ho Hlokahala Kopano | Ee |
| Ga tlhaloso Met | UL |
| UPC | 633779048180 |
Image 3.1: Dimensional drawing of the chandelier, showing 21.5" width, 29.75" height, and 72" chain length.
4. Likahare tsa Sephutheloana
Carefully unpack your new chandelier and lay out all parts on a clean, soft surface. Ensure all components are present before discarding packaging materials.
- Chandelier Frame (Black Forged)
- 4 Glass Shades (White Enclosed)
- Sete ea Lisebelisoa tsa ho Kenya (Canopy, Plate ea ho Kenya, Likurufu, Linate tsa terata)
- Chain and Wiring (Pre-attached or separate for assembly)
- Buka ea Tataiso
Hlokomela: Bulbs are not included with this fixture. Four (4) E12 base bulbs, up to 60 watts each, are required.
Setšoantšo sa 4.1: Haufi-ufi view of the four E12 bulb sockets and white enclosed glass shades.
5. Ho seta le ho kenya
This chandelier is designed for semi-flush mount installation. Professional installation by a licensed electrician is strongly recommended.
Lisebelisoa le Lisebelisoa tse Hlokehang (Ha li kenyelelitsoe):
- Screwdriver ea Phillips
- Flathead Screwdriver
- Li-Strippers tsa Mohala
- Pliers
- Theipi ea Motlakase
- Likhalase tsa Tšireletso
- Lere
- E12 Base Bulbs (4, max 60W each)
Mehato ea ho Kenya:
- Tima Matla: Locate the circuit breaker that supplies power to the installation location and turn it off. Verify power is off using a voltagmohlahlobi.
- Lokisetsa ho Beha: Attach the mounting plate to the junction box in the ceiling using the provided screws. Ensure it is securely fastened.
- Adjust Chain Length (if applicable): If your fixture includes a chain, determine the desired hanging height and adjust the chain length by removing links as needed. Feed the electrical wires through the chain and canopy.
- Etsa likhokahano tsa Motlakase: Connect the fixture's wires to the house wiring.
- Connect the bare copper (ground) wire from the fixture to the green or bare copper ground wire from the junction box.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box.
- Sireletsehile Canopy: Carefully push the canopy up to the ceiling, covering the junction box, and secure it with the provided screws or nuts.
- Kenya Li-bulbs: Screw four (4) E12 base bulbs (not included) into the sockets. Do not exceed 60 watts per bulb.
- Hokela Shades: Carefully place the white enclosed glass shades over each bulb socket.
- Khutlisa Matla: Bulela motlakase ho sekhechana sa potoloho.
Setšoantšo sa 5.1: E nchocho view of the chandelier, showcasing its black forged frame and white shades.
6. Litaelo tsa Ts'ebetso
Once installed, your Crystorama Libby Langdon Sylvan Chandelier operates via a standard wall switch connected to the fixture's electrical circuit. Simply toggle the wall switch to turn the chandelier on or off.
This fixture is compatible with dimmable E12 LED bulbs if connected to a compatible dimmer switch (sold separately).
7. Tlhokomelo le Tlhokomelo
Regular cleaning and proper care will help maintain the appearance and functionality of your chandelier.
Ho hloekisa:
- Always Disconnect Power: Before cleaning, ensure the power supply to the fixture is turned off at the circuit breaker.
- Frame: Wipe the black forged metal frame with a soft, dry, or slightly damp cloth. Avoid abrasive cleaners, solvents, or polishes, as these can damage the finish.
- Meriti ea Khalase: The white enclosed glass shades can be gently wiped with a soft, damp cloth. For stubborn marks, a mild glass cleaner can be used sparingly on the cloth, not directly on the glass. Ensure shades are completely dry before restoring power.
Phetoho ea Bulb:
- Tima Matla: Always turn off the power at the circuit breaker before replacing bulbs.
- Lumella ho Pholisa: Allow bulbs to cool completely before touching them.
- Kenya sebaka: Unscrew the old bulb and screw in a new E12 base bulb. Ensure the replacement bulb does not exceed 60 watts.
8. Ho rarolla mathata
If you experience issues with your chandelier, consult the following common problems and solutions:
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Leseli ha le bonese | Ha ho na matla ho sesebelisoa Khokelo ea terata e hlephileng Tleloubu e fosahetseng | Check circuit breaker and wall switch Verify all wire connections are secure (with power off) Tlosa tleloubu ka e ncha |
| Ho panyapanya ha leseli | Tleloubu e hlephileng Mofuta o fosahetseng oa tleloubu bakeng sa dimmer Khokelo ea terata e hlephileng | Tiisa tleloubu Ensure dimmable bulbs are used with a compatible dimmer Check wire connections (with power off) |
| Lerata le kokomotsang | Sebopeho sa dimmer se sa lumellaneng Likarolo tse hlephileng | Replace dimmer with an LED-compatible model Etsa bonnete ba hore likarolo tsohle li tlanngoe ka mokhoa o sireletsehileng |
If the issue persists after attempting these solutions, please contact Crystorama customer support or a qualified electrician.
9. Tiisetso le Tšehetso
This Crystorama Libby Langdon Sylvan Chandelier is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your purchase or visit the official Crystorama websebaka.
For additional assistance, you may contact Crystorama customer service directly.
