Selelekela
Thank you for choosing the PRIOS Edwina LED Ceiling Light. This manual provides important information regarding the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
The Edwina LED Ceiling Light is designed for indoor use, including bathrooms and damp rooms, thanks to its IP44 protection rating. It features an integrated LED light source with adjustable color temperature and is compatible with external dimmers for brightness control.
Litaelo tsa Tšireletseho
- Tšireletseho ea Motlakase: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always switch off the main power supply at the fuse box or circuit breaker before commencing any installation, maintenance, or repair work.
- Moqtage: Netefatsa hore phepelo e fana ka voltage matches the fixture's requirements (230V).
- Boemo ba IP44: This fixture is protected against solid objects larger than 1mm and against splashing water from any direction. It is suitable for use in bathrooms (Zone 2 and outside zones) and other damp environments. Do not immerse in water.
- Mocheso: U se ke ua koahela sesebelisoa ka thepa e sireletsang mocheso. Etsa bonnete ba hore moea o kena hantle ho potoloha sesebelisoa.
- Ho hloekisa: Disconnect power before cleaning. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- LED e kopantsoeng: The LED light source is integrated and not replaceable by the user. Do not attempt to open or modify the LED module.
Litaba tsa Sephutheloana
Please check that all components are present and undamaged before installation:
- 1 x PRIOS Edwina LED Ceiling Light fixture with integrated LED
- Lisebelisoa tsa ho kenya (li-screw, li-plug tsa lebota)
- Buka ea Tataiso
Ho seta le ho Kenya
Bohlokoa: Ensure the main power supply is switched off before installation.
- Itokisetse ho Kenya: Turn off the electricity at the main circuit breaker. Use a voltage tester ho netefatsa hore motlakase o timme.
- Remove Mounting Bracket: Carefully detach the mounting bracket from the back of the light fixture.
- Lintlha tsa ho Drilling Mark: Hold the mounting bracket against the ceiling at the desired installation location. Mark the positions for drilling holes.
- Drill Holes and Insert Wall Plugs: Drill holes at the marked positions and insert appropriate wall plugs (if required for your ceiling type).
- Secure Mounting Bracket: Attach the mounting bracket to the ceiling using the provided screws.
- Adjust Color Temperature (DIP Switch): Before connecting the wires and mounting the fixture, locate the DIP switch on the back of the LED driver. This switch allows you to select the desired color temperature: 3000K (Warm White), 4000K (Neutral White), or 6000K (Cool White). Select your preferred setting.
Setšoantšo: Ka hare view showing the DIP switch for color temperature selection (3000K, 4000K, 6000K).
- Khokelo ea Mohala: Connect the household electrical wires to the terminals on the fixture's driver. Ensure correct polarity (Live, Neutral, Earth) according to local regulations. Secure all connections.
Image: Internal wiring and mounting mechanism of the ceiling light.
- Mount the Fixture: Carefully align the light fixture with the mounting bracket and secure it in place. Ensure it is firmly attached to the ceiling.
- Khutlisa Matla: Hang ha ts'ebetso e phethiloe 'me likhokahano tsohle li sireletsehile, khutlisetsa matla ho sekhechana se seholo sa potoloho.
Litaelo tsa Ts'ebetso
The PRIOS Edwina LED Ceiling Light is designed for simple operation.
- Ho Bulela/Ho Koala: Use your standard wall switch to turn the light fixture on or off.
- Phetoho ea Mocheso oa Mobala: The color temperature (3000K, 4000K, 6000K) is set using the DIP switch during installation. To change it, you must disconnect power, remove the fixture, adjust the switch, and then re-install.
- Ts'ebetso ea Dimming: This fixture is dimmable. To adjust the brightness, an external dimmer switch compatible with LED lighting must be installed in your electrical circuit. Consult a qualified electrician for dimmer installation.
Image: The Edwina LED Ceiling Light displaying various color temperatures.
Tlhokomelo
The PRIOS Edwina LED Ceiling Light requires minimal maintenance.
- Ho hloekisa: Ensure the power is disconnected before cleaning. Wipe the fixture with a soft, slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish or electrical components.
- Mohloli oa Leseli la LED: The LED light source is integrated and has a long lifespan (approximately 25,000 hours). It is not designed to be replaced by the user. If the LED fails, the entire fixture may need to be replaced.
Ho batle phoso
If you encounter issues with your PRIOS Edwina LED Ceiling Light, please refer to the following common problems and solutions:
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Leseli ha le khanye. | Ha ho phepelo ea motlakase. Khokahano ea wiring e hlephileng. Sesepa sa lebota se nang le phoso. | Sheba sekhechana sa potoloho le switch ea lebota. Ensure power is off, then check wiring connections. Test the wall switch. |
| Ho panyapanya ha leseli. | Khokahano ea wiring e hlephileng. Sebopeho sa dimmer se sa lumellaneng. | Ensure power is off, then check wiring connections. Ensure your dimmer is compatible with LED lighting. |
| Mocheso o fosahetseng oa 'mala. | DIP switch set incorrectly. | Disconnect power, remove fixture, adjust DIP switch to desired setting, then re-install. |
Haeba bothata bo ntse bo tsoela pele ka mor'a ho leka litharollo tsena, ka kopo ikopanye le ts'ehetso ea bareki.
Litlhaloso
Detailed technical specifications for the PRIOS Edwina LED Ceiling Light (Model 9917033):
| Sebopeho | Tlhaloso |
|---|---|
| Nomoro ea Mohlala | 9917033 |
| Brand | PRIOS |
| Lintho tse bonahalang | Polycarbonate, Aluminum |
| Mmala | Silver, White |
| Litekanyo (L x W x H) | 12.2 cm x 12.2 cm x 3.5 cm |
| Boima ba 'mele | 173 g |
| Mohloli oa Leseli | LED e kopantsoeng |
| Nomoro ea Lamps | 1 |
| Wattage | 6 W |
| Moqtage | 230 V AC |
| Flux e khanyang | 360 Lumen |
| Mocheso oa Mobala | 3000K, 4000K, 6000K (selectable via DIP switch) |
| Ho fifala | Yes (with external LED-compatible dimmer) |
| Karolelano ea Nako ea Bophelo | Lihora tse 25,000 |
| Tekanyetso ea Tšireletso ea IP | IP44 |
| Sehlopha sa Tšireletso | II |
| Sehlopha sa Matla a Matla | F |
| Tšebeliso e khethehileng | Ceiling, Hall, Bathroom (Indoor) |
Image: Product dimensions (Diameter 122mm, Height 35mm).
Image: EU Energy Label for the fixture, indicating class F. For more details, scan the QR code or visit eprel.ec.europa.eu/qr/745143.
Warranty le Tšehetso
For warranty information or technical support, please refer to the purchase documentation or contact the seller directly through your Amazon account. Keep your proof of purchase for any warranty claims.
