FOXWELL NT604 OBD2 Scanner and BT100 Pro Battery Tester User Manual

1. Selelekela

This manual provides comprehensive instructions for the operation and maintenance of your FOXWELL NT604 OBD2 Scanner and BT100 Pro Battery Tester. These devices are designed to assist in diagnosing vehicle issues and assessing battery health, providing valuable information for vehicle maintenance.

The FOXWELL NT604 is an advanced diagnostic scan tool capable of reading and clearing fault codes, displaying live data, and performing various tests on key vehicle systems. The FOXWELL BT100 Pro is a professional battery analyzer designed to test 12V batteries, providing accurate readings on battery voltage, CCA, internal resistance, and overall health.

2. Seta

2.1 Unpacking the Device

Carefully remove all components from the packaging. Verify that all items listed in the product packaging are present. Retain the packaging for future storage or shipping.

2.2 Matlafatso ea Pele

The NT604 scanner typically powers on when connected to a vehicle's OBD-II port. The BT100 Pro battery tester powers on when connected to a 12V battery.

Figure 2.1: The FOXWELL NT604 OBD2 Scanner and BT100 Pro Battery Tester.

3. Ts'ebetso

3.1 FOXWELL NT604 OBD2 Scanner Operation

The NT604 scanner connects to your vehicle's On-Board Diagnostics II (OBD-II) port to access vehicle system information.

1. Fumana Kou ea OBD-II: The OBD-II port is usually located under the dashboard on the driver's side.
2. Hokela Sekenara: Plug the NT604's diagnostic cable into the vehicle's OBD-II port. The scanner will power on automatically.
3. Vehicle Communication: The scanner will attempt to establish communication with the vehicle's ECU (Engine Control Unit). Follow on-screen prompts.
4. Mananeo a Menu ea Mantlha: Use the navigation buttons (up, down, left, right, OK, ESC) to select desired functions from the main menu. Common functions include:
   • Bala Likhoutu: Retrieves Diagnostic Trouble Codes (DTCs) from the vehicle's systems.
   • Hlakola Likhoutu: Erases DTCs from the vehicle's memory. Note: Clearing codes does not fix the underlying problem. Address the issue before clearing codes.
   • Live Data: Displays real-time sensor data from the vehicle.
   • Thibela Foreime: Captures a snapshot of vehicle operating conditions at the time a fault code was set.
   • I/M Ho itokisa: E hlahloba boemo ba li-monitor tse amanang le ho ntša mosi.
   • System Diagnostic: Accesses specific vehicle systems like Engine, ABS, SRS (Airbag), and Transmission for detailed diagnostics.

Figure 3.1: The NT604 scanner's main menu showing various OBDII functions.

Figure 3.2: The NT604 scanner's capability to diagnose Engine, ABS, SRS, and Transmission systems.

3.2 FOXWELL BT100 Pro Battery Tester Operation

The BT100 Pro is designed for testing 12V automotive batteries. It can perform tests both in-vehicle and out-of-vehicle.

1. Lokisa Betri: Ensure battery terminals are clean and free of corrosion.
2. Hokela Mohlahlobi:
   • Kopanya kl e khubeluamp ho terminal e nepahetseng (+) ea betri.
   • Kopanya cl e ntšoamp ho terminal e mpe (-) ea betri.
   • The tester will power on automatically.
3. Select Test Type:
   • In-Vehicle Test: For batteries installed in the vehicle.
   • Out-of-Vehicle Test: For standalone batteries.
4. Khetha Mofuta oa Betri: Choose the correct battery type (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, GEL) from the menu. Incorrect selection may lead to inaccurate results.
5. Enter CCA Rating: Input the Cold Cranking Amps (CCA) rating found on the battery label.
6. Etsa Teko: The tester will perform the analysis and display results such as:
   • Moqtage
   • Measured CCA
   • Khanyetso ea ka hare
   • Boemo ba Bophelo (SOH)
   • Boemo ba Charge (SOC)

Figure 3.3: The BT100 Pro supports both in-vehicle and out-of-vehicle battery testing.

Figure 3.4: The BT100 Pro provides detailed battery status including internal resistance, CCA, and health display.

4. Tlhokomelo

4.1 Ho hloekisa

Hlakola sesebelisoa ka bonolo, damp lesela. U se ke ua sebelisa lihlatsoi tse khorofo kapa li-solvent. Netefatsa hore sesebelisoa se omme pele se bolokoa.

4.2 Lintlafatso tsa Software

Periodically check the FOXWELL official website for software updates for the NT604 scanner. Updates can improve performance, add new features, and expand vehicle compatibility. Follow the instructions provided on the website for updating the device firmware.

4.3 Polokelo

Store the devices in a clean, dry environment, away from extreme temperatures and direct sunlight. Keep cables neatly coiled to prevent damage.

5. Ho rarolla mathata

6. Litlhaloso

FOXWELL NT604 OBD2 Scanner

• Sistimi e tšehelitsoeng: Engine, ABS, SRS (Airbag), Transmission
• OBDII Modes: 10 modes (Read Codes, Clear Codes, Live Data, Freeze Frame, I/M Readiness, Component Test, O2 Monitor Test, On-Board Monitor Test, Retrieve Vehicle Info, Modules Present)
• Mohloli oa Matla: Vehicle OBD-II port

FOXWELL BT100 Pro Battery Tester

• Battery Voltage: 12V
• Lekhalo la Teko: 100-1100 CCA
• Mefuta ea Battery e Tšehetsoeng: Regular Flooded, AGM Flat Plate, AGM Spiral, GEL
• Liphetho tsa liteko: Moqtage, CCA, Internal Resistance, State of Health (SOH), State of Charge (SOC)
• Mohloli oa Matla: Battery Powered (from the tested battery)

Setšoantšo sa 6.1: Example of battery test results displayed on the BT100 Pro.

7. Tiisetso le Tšehetso

7.1 Boitsebiso ba Tiisetso

FOXWELL products are covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official FOXWELL websebaka bakeng sa lintlha le lipehelo tse qaqileng tsa tiisetso.

7.2 Tšehetso ea Theknoloji

For technical assistance, software updates, or service inquiries, please contact FOXWELL customer support. Contact information can typically be found on the official FOXWELL websetsheng kapa sephuthelong sa sehlahiswa.

Websebaka: www.foxwelltech.com (Example link, verify official site)