1. Selelekela
This manual provides essential information for the safe and efficient operation of your SCHNEIDER SCDI30N1 30cm Induction Hob. Please read it thoroughly before installation and use, and keep it for future reference. This compact 30cm induction hob is designed for efficient cooking in smaller kitchens, offering two induction cooking zones with independent touch controls.
2. Boitsebiso ba Tšireletseho
- Always ensure the hob is installed by a qualified professional.
- U se ke ua tšoara libaka tse chesang. Sebelisa lithupa kapa likotola.
- Le ka mohla u se ke ua tlohela ho pheha ho sa hlokomeloa.
- Do not use the hob as a storage surface.
- Boloka bana hole le sesebelisoa nakong ea ts'ebetso le ho se pholisa.
- Do not place metallic objects (knives, forks, spoons, lids) on the hob surface as they can become hot.
- Etsa bonnete ba hore ho na le moea o nepahetseng ho potoloha sesebelisoa.
- In case of a crack in the glass ceramic surface, immediately disconnect the appliance from the power supply.
- Refer to the "Residual Heat Indicator" section for information on hot surfaces after use.
3. Sehlahisoa Overview
The SCHNEIDER SCDI30N1 is a compact 30cm induction hob featuring two cooking zones and intuitive touch controls.
Likarolo tsa Bohlokoa:
- Two 180mm induction cooking zones.
- Independent Touch Control operation.
- 9 power levels for precise cooking.
- Booster function for rapid heating.
- Keep Warm function (70°C) for maintaining food temperature.
- Nako ea metsotso e 99.
- Child Lock for safety.
- Residual Heat Indicator ('H') to warn of hot surfaces.
- Automatic shut-off for enhanced safety.
- Easy-to-clean glass surface.
Lekhotla la taolo:
The control panel is located at the front of the hob and features sensitive touch buttons for easy operation.

Setšoantšo sa 1: Sebopeho sa Panel ea Taolo
- Power Button (U): Turns the hob on/off.
- Likonopo tsa Khetho ea Libaka: Selects the cooking zone to adjust.
- +/- Likonopo: Adjust power levels (1-9) or timer settings.
- Booster Button (B): Activates rapid heating for the selected zone.
- Konopo ea Nako: Sets the cooking timer.
- Konopo ea ho Lock ea Ngoana: Activates/deactivates the child lock.
- Boloka Konopo e Mofuthu: E kenya tshebetsong mosebetsi wa Keep warm.

Figure 2: SCHNEIDER SCDI30N1 Induction Hob
4. Ho seta le ho kenya
Proper installation is crucial for the safe and efficient operation of your induction hob. It must be performed by a qualified professional.
Boholo:
- Litekanyo tsa Sehlahisoa (L x W x H): 52 cm x 28.8 cm x 6.4 cm
- Cut-out Niche Dimensions (L x W): 50cm x 26.8cm
Khokelo ea Motlakase:
- Moqtage/Hangata: 220-240 V, 50 Hz
- Kakaretso ea Matla: 3500 W
- The appliance must be connected to the mains supply by a qualified electrician in accordance with local regulations.
Sebaka:
Ensure adequate clearance around the hob for proper ventilation. Refer to the installation diagram for precise measurements and requirements.

Figure 3: Installation Diagram with Dimensions
5. Litaelo tsa Ts'ebetso
Tlosa/Tima:
- To turn on: Touch the Power button (U). The display will show '0' for each zone.
- To turn off: Touch the Power button (U) again.
Ho Khetha Sebaka sa ho Pheha le Matla a ho Fetola:
- Place a suitable induction-compatible pan on the desired cooking zone.
- Tobetsa konopo ea khetho ea libaka tse tsamaellanang.
- Use the '+' or '-' buttons to select a power level from 1 to 9.
Mosebetsi oa Booster:
- Select a cooking zone and set a power level.
- Touch the 'B' (Booster) button. The display will show 'P'. This provides maximum power for rapid heating.
- The front zone provides 1500W (1800W with Booster).
- The rear zone provides 2000W (2300W with Booster).
Boloka Mosebetsi o Futhumetse:
- Khetha sebaka sa ho pheha.
- Touch the Keep Warm button. The zone will maintain a temperature of approximately 70°C.
- The maximum duration for this function is 2 hours.
Mosebetsi oa Sebali:
- Khetha sebaka sa ho pheha.
- Touch the Timer button.
- Use the '+' or '-' buttons to set the desired cooking time (up to 99 minutes).
- The timer will count down, and the hob will automatically switch off the selected zone when the time expires.
Senotlolo sa Bana:
- To activate: With the hob on, touch and hold the Child Lock button for a few seconds. A lock symbol will appear, and the controls will be disabled.
- To deactivate: Touch and hold the Child Lock button again until the lock symbol disappears.
Residual Heat Indicator ('H'):
After cooking, if a cooking zone is still hot, an 'H' will appear on the display. Do not touch the surface while 'H' is displayed to avoid burns. The hob also features automatic shut-off if left unattended for an extended period or if a spill occurs.
Video 1: Demonstration of a 2-zone induction hob's basic operation, including power on/off and adjusting heat settings.
6. Tlhoekiso le Tlhokomelo
- Ho Hloekisa Letsatsi le Letsatsi: Wipe the glass surface with a soft cloth and mild detergent after each use, once the hob has cooled down.
- Matheba a manganga: Use a specialized ceramic hob cleaner for tougher stains.
- Qoba: Abrasive cleaners, scouring pads, or harsh chemicals that can scratch the glass surface.
- Ensure the hob is completely dry before next use.
7. Ho rarolla mathata
- Hob ha e bulele: Check power supply, ensure the power button is pressed correctly.
- 'H' displayed: Indicates residual heat. Wait for the hob to cool down.
- Error codes (e.g., 'E'): Consult the full product manual for specific error code meanings and solutions.
- Pan not detected: Ensure the pan is induction-compatible and correctly centered on the cooking zone.
8. Lintlha tsa Setegeniki
| Tšobotsi | Tlhaloso |
| Brand | Schneider |
| Nomoro ea Mohlala | SCDI30N1 |
| Mmala | Ntsho |
| Litekanyo tsa Sehlahisoa (L x W x H) | 52 cm x 28.8 cm x 6.4 cm |
| Boima bo kahare | 4.5 lik'hilograma |
| Kakaretso ea Matla | 3500 W |
| Front Zone Diameter | 180 limilimithara |
| Front Zone Power | 1500 W (1800 W with Booster) |
| Rear Zone Diameter | 180 limilimithara |
| Rear Zone Power | 2000 W (2300 W with Booster) |
| Palo ea Maemo a Matla | 9 |
| Sebala nako | Ho fihlela metsotso e 99 |
| Likarolo tsa Tšireletso | Child Lock, Residual Heat Indicator, Automatic Shut-off |
| Lintho tse bonahalang | Induction (Glass Ceramic Surface) |
| Moqtage / Maqhubu | 220-240 V, 50 Hz |
| Cut-out Niche Dimensions (L x W) | 50cm x 26.8cm |
| Bolelele ba Cable | 100 cm |
9. Tiisetso le Tšehetso
Warranty and detailed support information are not available in the provided product data. Please refer to the manufacturer's official website or contact their customer service for specific warranty terms and support options.





