1. Boitsebiso ba Bohlokoa ba Tšireletseho
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.
- TLHOKOMELISO: Kotsi ea ho tsosoa ke motlakase. Tlosa motlakase ho fuse kapa sekhechana sa potoloho pele u kenya kapa u sebeletsa.
- Ho kenya ho lokela ho etsoa ke setsebi sa motlakase se tšoanelehang ho latela melao eohle ea motlakase ea naha le ea lehae.
- O se ke wa kenya dibakeng tseo mocheso wa tshebetso o fetang mocheso o lekanyeditsweng wa sesebediswa.
- Netefatsa hore likhokahano tsohle li bolokehile ebile li sirelelitsoe hantle.
- Sesebediswa sena se loketse damp libaka.
2. Sehlahisoa Overview le Likaroloana
The Nuvo Lighting 65-586 is a 2x4 foot LED Backlit Flat Panel with an integrated emergency battery backup. It features selectable color temperatures (CCT) and is designed for commercial and industrial applications.
Setšoantšo sa 1: Pele view of the Nuvo Lighting 65-586 LED Backlit Flat Panel. This image shows the full rectangular panel with its white finish, illustrating its sleek and minimalist design suitable for various ceiling installations.
Likarolo tse Kenyelelitsoeng:
- LED Backlit Flat Panel (Model 65/586)
- Backup e Kopantsoeng ea Battery ea Tšohanyetso
- Buka ea Tataiso
- Mounting Hardware (may vary based on installation type, e.g., T-bar clips, suspension kit - sold separately)
Setšoantšo sa 2: Detail of the integrated emergency test button and indicator light. This component allows for manual testing of the emergency battery function and provides visual status of the battery charge.
Setšoantšo sa 3: E haufi-ufi view of the panel's corner, highlighting the white frame and the textured surface of the light diffuser. This illustrates the construction and finish quality of the fixture.
3. Ho seta le ho kenya
Before installation, ensure the power supply is disconnected at the circuit breaker. This fixture is designed for recessed mounting in T-bar grid ceilings or can be suspended (suspension kit sold separately).
3.1 Likhetho tsa ho beha:
- Recessed T-Bar Grid: Place the panel directly into a standard 2x4 ft T-bar ceiling grid opening. Secure with appropriate clips (if not integrated).
- Ho Pehamisa Moepa: Use a compatible suspension kit (not included) to hang the panel from the ceiling structure. Follow the suspension kit's instructions for secure installation.
Setšoantšo sa 4: Ka hare view of the panel's mounting mechanism, showing the metal brackets designed for secure installation within a ceiling grid. This image provides insight into the structural components.
3.2 Mehala ea Motlakase:
- Ensure the main power supply is OFF.
- Connect the fixture's input wires to the building's electrical supply (100-347V). Follow standard wiring color codes: Black to Line, White to Neutral, Green/Ground to Ground.
- For 0-10V dimming functionality, connect the purple wire to the dimmer's positive (+) output and the gray wire to the dimmer's negative (-) output. Ensure the dimmer is compatible with 0-10V LED drivers.
- Secure all wire connections with appropriate wire nuts or connectors.
3.3 Color Temperature (CCT) Selection:
The fixture features selectable CCT. Locate the CCT selection switch on the back or side of the fixture. Choose between 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight) before final installation or powering on.
4. Litaelo tsa Ts'ebetso
Once installed and wired, restore power to the fixture.
- Ts'ebetso e Tloaelehileng: The panel will illuminate to the selected CCT and brightness level determined by the 0-10V dimmer (if connected).
- Ho khanya: Adjust the compatible 0-10V dimmer to control the light output from 100% down to 10%.
- Ts'ebetso ea Tšohanyetso: Ha ho ka ba le matla otage, the integrated emergency battery backup will automatically activate, providing approximately 90 minutes of illumination at a reduced lumen output (8W/~1000 lumens).
- Emergency Test: Press the integrated test button (refer to Figure 2) to manually check the emergency battery function. The indicator light will show the battery status (e.g., green for charged, red for charging/fault).
5. Tlhokomelo
The Nuvo Lighting 65-586 LED panel is designed for minimal maintenance.
- Ho hloekisa: Ensure power is off before cleaning. Wipe the surface of the panel with a soft, damp lesela. Se ke oa sebelisa li-abrasive cleaners kapa solvents.
- Nako ea bophelo ea LED: The LED light source has a rated lifespan of 50,000 hours, meaning no bulb changes are required.
- Betri ea Tšohanyetso: The integrated emergency battery is maintenance-free. Regular testing using the test button is recommended to ensure proper function.
6. Ho rarolla mathata
If the fixture does not operate correctly, refer to the following troubleshooting guide:
| Bothata | Lebaka le ka khonehang | Tharollo |
|---|---|---|
| Sejana ha se bonese. | No power supply; Loose wiring; Incorrect CCT selection. | Check circuit breaker; Verify all wire connections; Ensure CCT switch is set correctly. |
| Mosebetsi oa ho fifala ha o sebetse. | Incompatible dimmer; Incorrect dimming wire connection. | Ensure 0-10V compatible dimmer is used; Check purple and gray wire connections. |
| Lebone la tshohanyetso ha le sebetse ha motlakase o le tengtage. | Battery not charged; Faulty battery; Test button issue. | Allow 24 hours for initial battery charge; Press test button to check indicator light; Contact support if issue persists. |
7. Litlhaloso
Setšoantšo sa 5: Technical diagram illustrating key features, specifications, and dimensions of the Nuvo Lighting 65-586 LED Backlit Flat Panel. This provides a comprehensive overview bakeng sa litšupiso tsa tekheniki.
| Sebopeho | Lintlha |
|---|---|
| Nomoro ea Mohlala | 65/586 |
| Mofuta | LED Backlit Flat Panel with Emergency Battery Backup |
| Litekanyo (L x W x H) | 47.72" x 23.75" x 2.88" |
| Wattage | 50 Watts |
| Moqtage | Li-Volts tsa 100-347 |
| Sehlahisoa sa Lumen | Lumens ea 5250-5500 |
| Mocheso oa Mobala (CCT) | Khetho e ka khethoang: 3500K, 4000K, 5000K |
| Index ea ho Fana ka Mebala (CRI) | >80 |
| Ho fifala | 0-10V E ka tima |
| Emergency Runtime | 90 minutes (at 8W/~1000 lumens) |
| Bolele ba bophelo | Lihora tse 50,000 |
| Qetella | Bosoeu |
| Lintho tse bonahalang | Alloy Steel, Aluminium |
| Mofuta oa ho Beha | Panel Mount (Recessed T-bar, Suspended) |
| Setifikeiti | (Implied from image: UL, FCC, RoHS) |
8. Tiisetso le Tšehetso
This Nuvo Lighting product is covered by a Tiisetso e lekantsoeng ea selemo se le seng ho tloha ka letsatsi la theko. Tiisetso ena e koahela mefokolo ea thepa le moetso tlas'a tšebeliso e tloaelehileng.
For warranty claims, technical assistance, or further inquiries, please contact Nuvo Lighting customer support. Keep your purchase receipt as proof of purchase.
You can visit the official Nuvo store for more information: Lebenkele la Nuvo ho Amazon
